C++ CONTROL函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CONTROL函数的典型用法代码示例。如果您正苦于以下问题：C++ CONTROL函数的具体用法？C++ CONTROL怎么用？C++ CONTROL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CONTROL函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: init_telnet

void
init_telnet(void)
{
    env_init();

    SB_CLEAR();
    ClearArray(options);

    connected = ISend = localflow = donebinarytoggle = 0;
#ifdef	AUTHENTICATION
#ifdef	ENCRYPTION
    auth_encrypt_connect(connected);
#endif
#endif
    restartany = -1;

    SYNCHing = 0;

    /* Don't change NetTrace */

    escape = CONTROL(']');
    rlogin = _POSIX_VDISABLE;
#ifdef	KLUDGELINEMODE
    echoc = CONTROL('E');
#endif

    flushline = 1;
    telrcv_state = TS_DATA;
}

开发者ID:AhmadTux，项目名称:DragonFlyBSD，代码行数:29，代码来源:telnet.c

示例2: GetInputFromString

CARCONTROLMAP_LOCAL::CONTROL CARCONTROLMAP_LOCAL::GetControl(const std::string & inputname, size_t controlid)
{
	size_t input = GetInputFromString(inputname);
	if (input == CARINPUT::INVALID)
		return CONTROL();

	std::vector<CONTROL> & input_controls = controls[input];
	if (controlid < input_controls.size())
		return input_controls[controlid];
	else
		return CONTROL();
}

开发者ID:haltakov，项目名称:synthetic-dataset，代码行数:12，代码来源:carcontrolmap_local.cpp

示例3: sml_control_suspend

SML_PRIMITIVE void
sml_control_suspend()
{
	struct sml_control *control = CONTROL();
	control->frame_stack_top = CALLER_FRAME_END_ADDRESS();
	control_suspend(control);
}

开发者ID:hsk，项目名称:docs，代码行数:7，代码来源:control.c

示例4: do_console_raw_local_read

static gboolean do_console_raw_local_read(GObject *stream,
                                          gpointer opaque)
{
    GUnixInputStream *localStdin = G_UNIX_INPUT_STREAM(stream);
    GVirSandboxConsoleRaw *console = GVIR_SANDBOX_CONSOLE_RAW(opaque);
    GVirSandboxConsoleRawPrivate *priv = console->priv;
    GError *err = NULL;

    gssize ret = g_pollable_input_stream_read_nonblocking
        (G_POLLABLE_INPUT_STREAM(localStdin),
         priv->localToConsole + priv->localToConsoleOffset,
         priv->localToConsoleLength - priv->localToConsoleOffset,
         NULL, &err);
    if (ret < 0) {
        g_debug("Error from local read %s", err ? err->message : "");
        do_console_raw_close(console, err);
        g_error_free(err);
        goto cleanup;
    }

    if (ret == 0)
        priv->localEOF = TRUE;
    else if (priv->localToConsole[priv->localToConsoleOffset] ==
             CONTROL(gvir_sandbox_console_get_escape(GVIR_SANDBOX_CONSOLE(console)))) {
        do_console_raw_close(console, err);
        goto cleanup;
    }

    priv->localToConsoleOffset += ret;

    priv->localStdinSource = NULL;
    do_console_raw_update_events(console);
 cleanup:
    return FALSE;
}

开发者ID:libvirt，项目名称:libvirt-sandbox，代码行数:35，代码来源:libvirt-sandbox-console-raw.c

示例5: control_enum_ptr

static void
control_enum_ptr(struct sml_control *control, void (*trace)(void **),
		 enum sml_gc_mode mode)
{

	printf("enum 1 %p %p\n", control, CONTROL());
	stack_enum_ptr(control, trace);
	printf("enum 2 %p\n", CONTROL());
	sml_exn_enum_ptr(control->exn, trace);
	if (control->tmp_root[0]) {
		printf("enum 2 tmp_root 0 %p\n", &control->tmp_root[0]);
		trace(&control->tmp_root[0]);		
	}
	if (control->tmp_root[1])
		trace(&control->tmp_root[1]);
}

开发者ID:hsk，项目名称:docs，代码行数:16，代码来源:control.c

示例6: combuf_create

combuf_t combuf_create(const uint8_t control, const combuf_size_t payload_size)
{
    const cb_store_t cb_size =
        COMBUF_HEAD_SIZE + payload_size + COMBUF_END_SIZE;
    cb_store_t _busy = cb_size;
    result_t res = ENOERR;
    cb_offset_t _front;

    /* критическая секция нужна, потому что combuf_create может быть
     * вызвана как из прерывания, так и из задачи. */
    __critical_enter();
    _busy += busy;
    if (_busy <= COMBUF_STORE_SIZE) {
        _front = front;
        front = SUM(front, cb_size);
        busy = _busy;
    } else
        res = ENOMEM;
    __critical_exit();

    if (ENOERR != res)
        return res;

    /* Можно не вносить в критическую секцию, поскольку доступ к этим
     * полям осуществляется пользователем по описателю буфера, который
     * ему ещё не возвращён. */
    BEGIN(_front) = BEGIN_MARKER;
    SIZE(_front) = cb_size;
    CONTROL(_front) = control | CREATE_MASK;

    return (combuf_t) _front;
}

开发者ID:MaxGekk，项目名称:ZigZag，代码行数:32，代码来源:combuf.c

示例7: combuf_search

/* функция поиска буфера по полю контроля буфера.
 * Функция вызывается только из задач данного модуля. */
static combuf_t combuf_search(const uint8_t mask, const uint8_t value)
{
    cb_store_t cb_size;
    cb_offset_t _front;
    uint8_t cb_ctrl;
    combuf_t cb_iter = back;


    while (cb_iter != front) {

        /* не защищаем CONTROL( cb_iter ), так как предполагаем,
         * что вычитывание атомарно */
        if (value == (CONTROL(cb_iter) & mask))
            return cb_iter;

        /* поле SIZE( cb_iter ) можно не вычитывать в крит. секции, так как
         * это поле не изменяется никем. Изменяется только в combuf_create, но
         * это не страшно:
         * 1. если combuf_create выз. из задачи, то всё хорошо. 
         *      front и поле size будут согласованы.
         * 2. если из прерывания, то тоже согласованы.  */
        cb_iter = SUM(cb_iter, SIZE(cb_iter));
    }

    return ENOTFOUND;
}

开发者ID:MaxGekk，项目名称:ZigZag，代码行数:28，代码来源:combuf.c

示例8: sml_mutex_lock

void
sml_mutex_lock(pthread_mutex_t *m)
{
	struct sml_control *control = CONTROL();
	control_suspend(control);
	MUTEX_LOCK(m);
	control_resume(control);
}

开发者ID:hsk，项目名称:docs，代码行数:8，代码来源:control.c

示例9: virshGetEscapeChar

static char
virshGetEscapeChar(const char *s)
{
    if (*s == '^')
        return CONTROL(c_toupper(s[1]));

    return *s;
}

开发者ID:libvirt，项目名称:libvirt，代码行数:8，代码来源:virsh-console.c

示例10: mca_search_char

/*
 * Handle a char of a search command.
 */
static int
mca_search_char(int c)
{
	int flag = 0;

	/*
	 * Certain characters as the first char of
	 * the pattern have special meaning:
	 *	!  Toggle the NO_MATCH flag
	 *	*  Toggle the PAST_EOF flag
	 *	@  Toggle the FIRST_FILE flag
	 */
	if (len_cmdbuf() > 0)
		return (NO_MCA);

	switch (c) {
	case CONTROL('E'): /* ignore END of file */
	case '*':
		if (mca != A_FILTER)
			flag = SRCH_PAST_EOF;
		break;
	case CONTROL('F'): /* FIRST file */
	case '@':
		if (mca != A_FILTER)
			flag = SRCH_FIRST_FILE;
		break;
	case CONTROL('K'): /* KEEP position */
		if (mca != A_FILTER)
			flag = SRCH_NO_MOVE;
		break;
	case CONTROL('R'): /* Don't use REGULAR EXPRESSIONS */
		flag = SRCH_NO_REGEX;
		break;
	case CONTROL('N'): /* NOT match */
	case '!':
		flag = SRCH_NO_MATCH;
		break;
	}

	if (flag != 0) {
		search_type ^= flag;
		mca_search();
		return (MCA_MORE);
	}
	return (NO_MCA);
}

开发者ID:gdamore，项目名称:less-fork，代码行数:49，代码来源:command.c

示例11: parport_SPP_supported

/*
 * Checks for port existence, all ports support SPP MODE
 */
static int __devinit parport_SPP_supported(struct parport *pb)
{
	unsigned char r, w;

	/*
	 * first clear an eventually pending EPP timeout 
	 * I ([email protected]) have an SMSC chipset
	 * that does not even respond to SPP cycles if an EPP
	 * timeout is pending
	 */
	clear_epp_timeout(pb);

	/* Do a simple read-write test to make sure the port exists. */
	w = 0xc;
	parport_writeb (w, CONTROL (pb));

	/* Is there a control register that we can read from?  Some
	 * ports don't allow reads, so read_control just returns a
	 * software copy. Some ports _do_ allow reads, so bypass the
	 * software copy here.  In addition, some bits aren't
	 * writable. */
	r = parport_readb (CONTROL (pb));
	if ((r & 0xf) == w) {
		w = 0xe;
		parport_writeb (w, CONTROL (pb));
		r = parport_readb (CONTROL (pb));
		parport_writeb (0xc, CONTROL (pb));
		if ((r & 0xf) == w)
			return PARPORT_MODE_PCSPP;
	}

	/* Try the data register.  The data lines aren't tri-stated at
	 * this stage, so we expect back what we wrote. */
	w = 0xaa;
	parport_gsc_write_data (pb, w);
	r = parport_gsc_read_data (pb);
	if (r == w) {
		w = 0x55;
		parport_gsc_write_data (pb, w);
		r = parport_gsc_read_data (pb);
		if (r == w)
			return PARPORT_MODE_PCSPP;
	}

	return 0;
}

开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:49，代码来源:parport_gsc.c

示例12: sml_push_fp

SML_PRIMITIVE void
sml_push_fp()
{
	struct sml_control *control = CONTROL();
	if (control->frame_stack_top_override != NULL)
		FATAL((0, "sml_push_fp overfull"));
	control->frame_stack_top_override = CALLER_FRAME_END_ADDRESS();
}

开发者ID:hsk，项目名称:docs，代码行数:8，代码来源:control.c

示例13: TerminalDefaultChars

void
TerminalDefaultChars (void)
{
  memmove (new_tc.c_cc, old_tc.c_cc, sizeof (old_tc.c_cc));
# ifndef	VDISCARD
  termFlushChar = CONTROL ('O');
# endif
# ifndef	VWERASE
  termWerasChar = CONTROL ('W');
# endif
# ifndef	VREPRINT
  termRprntChar = CONTROL ('R');
# endif
# ifndef	VLNEXT
  termLiteralNextChar = CONTROL ('V');
# endif
# ifndef	VSTART
  termStartChar = CONTROL ('Q');
# endif
# ifndef	VSTOP
  termStopChar = CONTROL ('S');
# endif
# ifndef	VSTATUS
  termAytChar = CONTROL ('T');
# endif
}

开发者ID:a5216652166，项目名称:rcp100，代码行数:26，代码来源:sys_bsd.c

示例14: TerminalSaveState

void
TerminalSaveState (void)
{
  tcgetattr (0, &old_tc);

  new_tc = old_tc;

#ifndef	VDISCARD
  termFlushChar = CONTROL ('O');
#endif
#ifndef	VWERASE
  termWerasChar = CONTROL ('W');
#endif
#ifndef	VREPRINT
  termRprntChar = CONTROL ('R');
#endif
#ifndef	VLNEXT
  termLiteralNextChar = CONTROL ('V');
#endif
#ifndef	VSTART
  termStartChar = CONTROL ('Q');
#endif
#ifndef	VSTOP
  termStopChar = CONTROL ('S');
#endif
#ifndef	VSTATUS
  termAytChar = CONTROL ('T');
#endif
}

开发者ID:a5216652166，项目名称:rcp100，代码行数:29，代码来源:sys_bsd.c

示例15: TerminalDefaultChars

void TerminalDefaultChars(void) {
#ifndef	USE_TERMIO
    ntc = otc;
    nltc = oltc;
    nttyb.sg_kill = ottyb.sg_kill;
    nttyb.sg_erase = ottyb.sg_erase;
#else	/* USE_TERMIO */
    memcpy(new_tc.c_cc, old_tc.c_cc, sizeof(old_tc.c_cc));
#ifndef	VDISCARD
    termFlushChar = CONTROL('O');
#endif
#ifndef	VWERASE
    termWerasChar = CONTROL('W');
#endif
#ifndef	VREPRINT
    termRprntChar = CONTROL('R');
#endif
#ifndef	VLNEXT
    termLiteralNextChar = CONTROL('V');
#endif
#ifndef	VSTART
    termStartChar = CONTROL('Q');
#endif
#ifndef	VSTOP
    termStopChar = CONTROL('S');
#endif
#ifndef	VSTATUS
    termAytChar = CONTROL('T');
#endif
#endif	/* USE_TERMIO */
}

开发者ID:gordonchaffee，项目名称:expectnt，代码行数:31，代码来源:terminal.cpp

示例16: TIM4_IRQHandler

void TIM4_IRQHandler(void)
{
	if(TIM_GetITStatus(TIM4,TIM_IT_Update)==SET) //溢出中断
	{
		inv_mpu_read();
		CONTROL();//电机控制
	}
	TIM_ClearITPendingBit(TIM4,TIM_IT_Update);  //清除中断标志位
}

开发者ID:SunaShen，项目名称:aircraft-test，代码行数:9，代码来源:stm32f4xx_it.c

示例17: sml_pop_fp

SML_PRIMITIVE void
sml_pop_fp()
{
	struct sml_control *control = CONTROL();
	ASSERT(control->frame_stack_top_override != NULL);
	control->frame_stack_top_override = NULL;
	control->tmp_root[0] = NULL;
	control->tmp_root[1] = NULL;
}

开发者ID:hsk，项目名称:docs，代码行数:9，代码来源:control.c

示例18: sml_current_phase

enum sml_sync_phase
sml_current_phase()
{
	struct sml_control *control = CONTROL();

	if (control->phase == SYNC2 || control->phase == MARK)
		if (sml_check_gc_flag != control->phase)
			control->phase = sml_check_gc_flag;
	return control->phase;
}

开发者ID:hsk，项目名称:docs，代码行数:10，代码来源:control.c

示例19: main

int main(void)
{
	struct usb_dev_handle *myhandle;

	myhandle = find_rl78();

	if (myhandle != NULL) {
		fd_set s_rd;
		struct timeval delay;
		char ch, ch2;
		
		configure_rl78(myhandle);
		configure_screen();

		while (ch != EOF && ch != CONTROL('d')) {
			delay.tv_sec = 0;
			delay.tv_usec = 0;
			FD_ZERO(&s_rd);
 			FD_SET(fileno(stdin), &s_rd);

    			select(fileno(stdin)+1, &s_rd, NULL, NULL, &delay);
			if (FD_ISSET (fileno(stdin), &s_rd)) {
				ch=getch();
				if (ch != EOF && ch != CONTROL('d')) 
					rl78_write(myhandle, &ch, 1, 100);
			}

			int ret = rl78_read(myhandle, &ch2, 1, 50);
			if (ret >= 0) {
				putchar (ch2);
			} 
			
		}

		usb_close(myhandle);
    		endwin();
	}

	return 0;
}

开发者ID:fdlamotte，项目名称:rl78console，代码行数:40，代码来源:rl78console.c

示例20: init_telnet

void
init_telnet(void)
{
    env_init();

    SB_CLEAR();
    memset(options, 0, sizeof options);

    connected = ISend = localflow = donebinarytoggle = 0;
    restartany = -1;

    SYNCHing = 0;

    escape = CONTROL(']');
    rlogin = _POSIX_VDISABLE;
#ifdef	KLUDGELINEMODE
    echoc = CONTROL('E');
#endif

    flushline = 1;
    telrcv_state = TS_DATA;
}

开发者ID:ajinkya93，项目名称:OpenBSD，代码行数:22，代码来源:telnet.c

注：本文中的CONTROL函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。