C++ COMMENT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中COMMENT函数的典型用法代码示例。如果您正苦于以下问题：C++ COMMENT函数的具体用法？C++ COMMENT怎么用？C++ COMMENT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了COMMENT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: H264FillerSei

/*------------------------------------------------------------------------------
  H264FillerSei()  Filler payload SEI message. Requested filler payload size
  could be huge. Use of temporary stream buffer is not needed, because size is
  know.
------------------------------------------------------------------------------*/
void H264FillerSei(stream_s * sp, sei_s * sei, i32 cnt)
{
    i32 i = cnt;

    ASSERT(sp != NULL && sei != NULL);

    H264NalUnitHdr(sp, 0, SEI, sei->byteStream);

    H264NalBits(sp, SEI_FILLER_PAYLOAD, 8);
    COMMENT("last_payload_type_byte");

    while(cnt >= 255)
    {
        H264NalBits(sp, 0xFF, 0x8);
        COMMENT("ff_byte");
        cnt -= 255;
    }
    H264NalBits(sp, cnt, 8);
    COMMENT("last_payload_size_byte");

    for(; i > 0; i--)
    {
        H264NalBits(sp, 0xFF, 8);
        COMMENT("filler ff_byte");
    }
    H264RbspTrailingBits(sp);
}

开发者ID:uplusplus，项目名称:rk_jpeg，代码行数:32，代码来源:H264Sei.c

示例2: output_mm_defines

void output_mm_defines(void)
{
	COMMENT("Size of struct page");
	DEFINE(STRUCT_PAGE_SIZE, sizeof(struct page));
	BLANK();
	COMMENT("Linux mm_struct offsets.");
	OFFSET(MM_USERS, mm_struct, mm_users);
	OFFSET(MM_PGD, mm_struct, pgd);
	OFFSET(MM_CONTEXT, mm_struct, context);
	BLANK();
	DEFINE(_PAGE_SIZE, PAGE_SIZE);
	DEFINE(_PAGE_SHIFT, PAGE_SHIFT);
	BLANK();
	DEFINE(_PGD_T_SIZE, sizeof(pgd_t));
	DEFINE(_PTE_T_SIZE, sizeof(pte_t));
	BLANK();
	DEFINE(_PGD_ORDER, PGD_ORDER);
	DEFINE(_PTE_ORDER, PTE_ORDER);
	BLANK();
	DEFINE(_PGDIR_SHIFT, PGDIR_SHIFT);
	BLANK();
	DEFINE(_PTRS_PER_PGD, PTRS_PER_PGD);
	DEFINE(_PTRS_PER_PTE, PTRS_PER_PTE);
	BLANK();
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:asm-offsets.c

示例3: VideoSignalType

/*------------------------------------------------------------------------------

	VideoSignalType

------------------------------------------------------------------------------*/
void VideoSignalType(stream_s * stream, videoSignalType_s * vst)
{
    if(vst->videoSignalType == ENCHW_YES)
    {
        EncPutBits(stream, 1, 1);
        COMMENT("Video Signal Type");
        EncPutBits(stream, vst->videoFormat, 3);
        COMMENT("Video Format");
        EncPutBits(stream, vst->videoRange, 1);
        COMMENT("Video Range");
        if(vst->colourDescription == ENCHW_YES)
        {
            EncPutBits(stream, 1, 1);
            COMMENT("Colour Description");
            EncPutBits(stream, vst->colourPrimaries, 8);
            COMMENT("Colour Primaries");
            EncPutBits(stream, vst->transferCharacteristics, 8);
            COMMENT("Transfer Characteristics");
            EncPutBits(stream, vst->matrixCoefficients, 8);
            COMMENT("Matrix Coefficients");
        }
        else
        {
            EncPutBits(stream, 0, 1);
            COMMENT("Colour Description");
        }
    }
    else
    {
        EncPutBits(stream, 0, 1);
        COMMENT("Video Signal Type");
    }

    return;
}

开发者ID:Astralix，项目名称:hardware_drivers，代码行数:40，代码来源:EncVisualObject.c

示例4: kedr_offsets_holder

/* This function is not intended to be executed. It is needed to provide
 * the numeric values of the needed offsets. */
void 
kedr_offsets_holder(void)
{
	/* kedr_local_storage */
	COMMENT("Offsets of the fields in struct kedr_local_storage");
	
	/* Register spill slots */
	DEFINE(KEDR_LSTORAGE_ax, KEDR_OFFSET_LS_REG(INAT_REG_CODE_AX));
	DEFINE(KEDR_LSTORAGE_cx, KEDR_OFFSET_LS_REG(INAT_REG_CODE_CX));
	DEFINE(KEDR_LSTORAGE_dx, KEDR_OFFSET_LS_REG(INAT_REG_CODE_DX));
	DEFINE(KEDR_LSTORAGE_bx, KEDR_OFFSET_LS_REG(INAT_REG_CODE_BX));
	DEFINE(KEDR_LSTORAGE_sp, KEDR_OFFSET_LS_REG(INAT_REG_CODE_SP));
	DEFINE(KEDR_LSTORAGE_bp, KEDR_OFFSET_LS_REG(INAT_REG_CODE_BP));
	DEFINE(KEDR_LSTORAGE_si, KEDR_OFFSET_LS_REG(INAT_REG_CODE_SI));
	DEFINE(KEDR_LSTORAGE_di, KEDR_OFFSET_LS_REG(INAT_REG_CODE_DI));

#ifdef CONFIG_X86_64
	DEFINE(KEDR_LSTORAGE_r8, KEDR_OFFSET_LS_REG(INAT_REG_CODE_8));
	DEFINE(KEDR_LSTORAGE_r9, KEDR_OFFSET_LS_REG(INAT_REG_CODE_9));
	DEFINE(KEDR_LSTORAGE_r10, KEDR_OFFSET_LS_REG(INAT_REG_CODE_10));
	DEFINE(KEDR_LSTORAGE_r11, KEDR_OFFSET_LS_REG(INAT_REG_CODE_11));
	DEFINE(KEDR_LSTORAGE_r12, KEDR_OFFSET_LS_REG(INAT_REG_CODE_12));
	DEFINE(KEDR_LSTORAGE_r13, KEDR_OFFSET_LS_REG(INAT_REG_CODE_13));
	DEFINE(KEDR_LSTORAGE_r14, KEDR_OFFSET_LS_REG(INAT_REG_CODE_14));
	DEFINE(KEDR_LSTORAGE_r15, KEDR_OFFSET_LS_REG(INAT_REG_CODE_15));
#endif
	/* The array of local values */
	OFFSET(KEDR_LSTORAGE_values, kedr_local_storage, values);
	
	/* Other fields */
	OFFSET(KEDR_LSTORAGE_tid, kedr_local_storage, tid);
	OFFSET(KEDR_LSTORAGE_fi, kedr_local_storage, fi);
	OFFSET(KEDR_LSTORAGE_write_mask, kedr_local_storage, write_mask);
	OFFSET(KEDR_LSTORAGE_info, kedr_local_storage, info);
	OFFSET(KEDR_LSTORAGE_dest_addr, kedr_local_storage, dest_addr);
	OFFSET(KEDR_LSTORAGE_temp, kedr_local_storage, temp);
	OFFSET(KEDR_LSTORAGE_temp1, kedr_local_storage, temp1);
	OFFSET(KEDR_LSTORAGE_temp_bx, kedr_local_storage, temp_bx);
	OFFSET(KEDR_LSTORAGE_temp_bp, kedr_local_storage, temp_bp);
	OFFSET(KEDR_LSTORAGE_ret_val, kedr_local_storage, ret_val);
	OFFSET(KEDR_LSTORAGE_ret_val_high, kedr_local_storage, ret_val_high);
	OFFSET(KEDR_LSTORAGE_ret_addr, kedr_local_storage, ret_addr);
	OFFSET(KEDR_LSTORAGE_temp_aux, kedr_local_storage, temp_aux);
	BLANK();
	
	/* kedr_call_info */
	COMMENT("Offsets of the fields in struct kedr_call_info");
	OFFSET(KEDR_CALL_INFO_pc, kedr_call_info, pc);
	OFFSET(KEDR_CALL_INFO_target, kedr_call_info, target);
	OFFSET(KEDR_CALL_INFO_repl, kedr_call_info, repl);
	OFFSET(KEDR_CALL_INFO_pre_handler, kedr_call_info, pre_handler);
	OFFSET(KEDR_CALL_INFO_post_handler, kedr_call_info, post_handler);
}

开发者ID:robcore，项目名称:kernel-strider，代码行数:55，代码来源:kedr_asm_offsets.c

示例5: EncJpegRestartInterval

/*------------------------------------------------------------------------------

    Function name: EncJpegRestartInterval

    Functional description: Sets DRI header data

    Inputs:

    Outputs:

------------------------------------------------------------------------------*/
void EncJpegRestartInterval(stream_s * stream, jpegData_s * data)
{
    if(data->restart.Ri != 0)
    {
        EncJpegHeaderPutBits(stream, DRI, 16);
        COMMENT("DRI");

        data->restart.Lr = 4;

        EncJpegHeaderPutBits(stream, data->restart.Lr, 16);
        COMMENT("Lr");
        EncJpegHeaderPutBits(stream, data->restart.Ri, 16);
        COMMENT("Rq");
    }
}

开发者ID:Astralix，项目名称:hardware_drivers，代码行数:26，代码来源:EncJpeg.c

示例6: output_thread_defines

void output_thread_defines(void)
{
	COMMENT("MIPS specific thread_struct offsets.");
	OFFSET(THREAD_REG16, task_struct, thread.reg16);
	OFFSET(THREAD_REG17, task_struct, thread.reg17);
	OFFSET(THREAD_REG18, task_struct, thread.reg18);
	OFFSET(THREAD_REG19, task_struct, thread.reg19);
	OFFSET(THREAD_REG20, task_struct, thread.reg20);
	OFFSET(THREAD_REG21, task_struct, thread.reg21);
	OFFSET(THREAD_REG22, task_struct, thread.reg22);
	OFFSET(THREAD_REG23, task_struct, thread.reg23);
	OFFSET(THREAD_REG29, task_struct, thread.reg29);
	OFFSET(THREAD_REG30, task_struct, thread.reg30);
	OFFSET(THREAD_REG31, task_struct, thread.reg31);
	OFFSET(THREAD_STATUS, task_struct,
	       thread.cp0_status);
#ifdef CONFIG_CPU_SUPPORTS_VECTOR_COPROCESSOR
	OFFSET(THREAD_VPU, task_struct, thread.vpu);
#endif
	OFFSET(THREAD_FPU, task_struct, thread.fpu);

	OFFSET(THREAD_BVADDR, task_struct, \
	       thread.cp0_badvaddr);
	OFFSET(THREAD_BUADDR, task_struct, \
	       thread.cp0_baduaddr);
	OFFSET(THREAD_ECODE, task_struct, \
	       thread.error_code);
	OFFSET(THREAD_TRAMP, task_struct, \
	       thread.irix_trampoline);
	OFFSET(THREAD_OLDCTX, task_struct, \
	       thread.irix_oldctx);
	BLANK();
}

开发者ID:laitianli，项目名称:loongson-linux-2.6.36-3_mips，代码行数:33，代码来源:asm-offsets.c

示例7: skipWhiteSpace

int
skipWhiteSpace(
    UCHAR stream
    )
{
    int c;

    do {
        c = GET(stream);
        if (WHITESPACE(c) || c == ESCH) {
            if (c == ESCH) {
                c = GET(stream);
                if (!WHITESPACE(c)) {   // push char back out, return esch
                    UngetTxtChr(c, file);
                    c = ESCH;
                    break;
                }
            }
            colZero = FALSE;            // we've moved past col 0
        }

        if (c == '\\')
            c = skipBackSlash(c, stream);
    } while(WHITESPACE(c));

    if (COMMENT(c,colZero,init)) {
        skipComments(stream);           // current char is always
        c = '\n';                       // \n after comments
        colZero = TRUE;                 // always in col 0 after a comment
    }
    return(c);                          // true if we're in col 0
}

开发者ID:fstudio，项目名称:nmake，代码行数:32，代码来源:lexer.cpp

示例8: output_thread_defines

void output_thread_defines(void)
{
	COMMENT("SCORE specific thread_struct offsets.");
	OFFSET(THREAD_REG0, task_struct, thread.reg0);
	OFFSET(THREAD_REG2, task_struct, thread.reg2);
	OFFSET(THREAD_REG3, task_struct, thread.reg3);
	OFFSET(THREAD_REG12, task_struct, thread.reg12);
	OFFSET(THREAD_REG13, task_struct, thread.reg13);
	OFFSET(THREAD_REG14, task_struct, thread.reg14);
	OFFSET(THREAD_REG15, task_struct, thread.reg15);
	OFFSET(THREAD_REG16, task_struct, thread.reg16);
	OFFSET(THREAD_REG17, task_struct, thread.reg17);
	OFFSET(THREAD_REG18, task_struct, thread.reg18);
	OFFSET(THREAD_REG19, task_struct, thread.reg19);
	OFFSET(THREAD_REG20, task_struct, thread.reg20);
	OFFSET(THREAD_REG21, task_struct, thread.reg21);
	OFFSET(THREAD_REG29, task_struct, thread.reg29);

	OFFSET(THREAD_PSR, task_struct, thread.cp0_psr);
	OFFSET(THREAD_EMA, task_struct, thread.cp0_ema);
	OFFSET(THREAD_BADUADDR, task_struct, thread.cp0_baduaddr);
	OFFSET(THREAD_ECODE, task_struct, thread.error_code);
	OFFSET(THREAD_TRAPNO, task_struct, thread.trap_no);
	BLANK();
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:25，代码来源:asm-offsets.c

示例9: E_NUM

std::string
GCodeWriter::_retract(double length, double restart_extra, const std::string &comment)
{
    std::ostringstream gcode;
    
    /*  If firmware retraction is enabled, we use a fake value of 1
        since we ignore the actual configured retract_length which 
        might be 0, in which case the retraction logic gets skipped. */
    if (this->config.use_firmware_retraction) length = 1;
    
    // If we use volumetric E values we turn lengths into volumes */
    if (this->config.use_volumetric_e) {
        double d = this->_extruder->filament_diameter();
        double area = d * d * PI/4;
        length = length * area;
        restart_extra = restart_extra * area;
    }
    
    double dE = this->_extruder->retract(length, restart_extra);
    if (dE != 0) {
        if (this->config.use_firmware_retraction) {
            gcode << "G10 ; retract\n";
        } else {
            gcode << "G1 " << this->_extrusion_axis << E_NUM(this->_extruder->E)
                           << " F" << this->_extruder->retract_speed_mm_min;
            COMMENT(comment);
            gcode << "\n";
        }
    }
    
    if (FLAVOR_IS(gcfMakerWare))
        gcode << "M103 ; extruder off\n";
    
    return gcode.str();
}

开发者ID:bjmckenz，项目名称:Slic3r，代码行数:35，代码来源:GCodeWriter.cpp

示例10: main

int main ()
{
    INIT_INFO ("SolveSquareEquation");

    COMMENT ("Enter a, b, c for ax^2 + bx + c = 0:");
    double a = 0, b = 0, c = 0;

    if (!INPUT (a) || !INPUT (b) || !INPUT(c))
        return 1;

    double x1 = 0, x2 = 0;
    int nRoots = SolveSquareEquation(a, b, c, &x1, &x2);

    switch (nRoots)
    {
    case 0:
        printf ("#No roots\n");
        break;
    case 1:
        printf ("#One root: x1 = %lg\n", x1);
        break;
    case 2:
        printf ("#Two roots: x1 = %lg, x2 = %lg\n", x1, x2);
        break;
    case INFINITE_ROOTS:
        printf ("#Infinite number of roots\n");
        break;
    }

    return 0;
}

开发者ID:alartum，项目名称:small-projects，代码行数:31，代码来源:main.cpp

示例11: output_octeon_cop2_state_defines

void output_octeon_cop2_state_defines(void)
{
	COMMENT("Octeon specific octeon_cop2_state offsets.");
	OFFSET(OCTEON_CP2_CRC_IV,	octeon_cop2_state, cop2_crc_iv);
	OFFSET(OCTEON_CP2_CRC_LENGTH,	octeon_cop2_state, cop2_crc_length);
	OFFSET(OCTEON_CP2_CRC_POLY,	octeon_cop2_state, cop2_crc_poly);
	OFFSET(OCTEON_CP2_LLM_DAT,	octeon_cop2_state, cop2_llm_dat);
	OFFSET(OCTEON_CP2_3DES_IV,	octeon_cop2_state, cop2_3des_iv);
	OFFSET(OCTEON_CP2_3DES_KEY,	octeon_cop2_state, cop2_3des_key);
	OFFSET(OCTEON_CP2_3DES_RESULT,	octeon_cop2_state, cop2_3des_result);
	OFFSET(OCTEON_CP2_AES_INP0,	octeon_cop2_state, cop2_aes_inp0);
	OFFSET(OCTEON_CP2_AES_IV,	octeon_cop2_state, cop2_aes_iv);
	OFFSET(OCTEON_CP2_AES_KEY,	octeon_cop2_state, cop2_aes_key);
	OFFSET(OCTEON_CP2_AES_KEYLEN,	octeon_cop2_state, cop2_aes_keylen);
	OFFSET(OCTEON_CP2_AES_RESULT,	octeon_cop2_state, cop2_aes_result);
	OFFSET(OCTEON_CP2_GFM_MULT,	octeon_cop2_state, cop2_gfm_mult);
	OFFSET(OCTEON_CP2_GFM_POLY,	octeon_cop2_state, cop2_gfm_poly);
	OFFSET(OCTEON_CP2_GFM_RESULT,	octeon_cop2_state, cop2_gfm_result);
	OFFSET(OCTEON_CP2_HSH_DATW,	octeon_cop2_state, cop2_hsh_datw);
	OFFSET(OCTEON_CP2_HSH_IVW,	octeon_cop2_state, cop2_hsh_ivw);
	OFFSET(OCTEON_CP2_SHA3,		octeon_cop2_state, cop2_sha3);
	OFFSET(THREAD_CP2,	task_struct, thread.cp2);
	OFFSET(THREAD_CVMSEG,	task_struct, thread.cvmseg.cvmseg);
	BLANK();
}

开发者ID:0x000000FF，项目名称:edison-linux，代码行数:25，代码来源:asm-offsets.c

示例12: XYZF_NUM

std::string
GCodeWriter::travel_to_xyz(const Pointf3 &point, const std::string &comment)
{
    /*  If target Z is lower than current Z but higher than nominal Z we
        don't perform the Z move but we only move in the XY plane and
        adjust the nominal Z by reducing the lift amount that will be 
        used for unlift. */
    if (!this->will_move_z(point.z)) {
        double nominal_z = this->_pos.z - this->_lifted;
        this->_lifted = this->_lifted - (point.z - nominal_z);
        return this->travel_to_xy(point);
    }
    
    /*  In all the other cases, we perform an actual XYZ move and cancel
        the lift. */
    this->_lifted = 0;
    this->_pos = point;
    
    std::ostringstream gcode;
    gcode << "G1 X" << XYZF_NUM(point.x)
          <<   " Y" << XYZF_NUM(point.y)
          <<   " Z" << XYZF_NUM(point.z)
          <<   " F" << XYZF_NUM(this->config.travel_speed.value * 60.0);
    COMMENT(comment);
    gcode << "\n";
    return gcode.str();
}

开发者ID:bjmckenz，项目名称:Slic3r，代码行数:27，代码来源:GCodeWriter.cpp

示例13: main

main(int argc,char *argv[])
{
  if (argc != 2) {
    fprintf(stderr,"usage: %s name-for-package\n", argv[0]);
    exit(1);
  }
  NEWLINE();
  PUTS("package "); PUTS(argv[1]); PUTS(" : Cc_Info =\n");
  PUTS("\tstruct\n");
  PUTS("\t\t");COMMENT("all sizes in bytes");
  NEWLINE();
  PUTVAL("intSzB", sizeof(int));
  PUTVAL("shortSzB", sizeof(short));
  PUTVAL("longSzB", sizeof(long));
  NEWLINE();
  PUTVAL("charSzB", sizeof(char));
  NEWLINE();
  PUTVAL("floatSzB", sizeof(float));
  PUTVAL("doubleSzB", sizeof(double));
  NEWLINE();
  PUTVAL("ptrSzB", sizeof(int *));
  NEWLINE();
  PUTVAL("unionAlign", sizeof(int *));
  PUTVAL("structAlign", sizeof(int *));
  NEWLINE();
  PUTS("\tend "); PUTS("/* package "); PUTS(argv[1]); PUTS(" */\n");
  exit(0);
}

开发者ID:DawidvC，项目名称:mythryl，代码行数:28，代码来源:cc-info.c

示例14: output_thread_defines

void output_thread_defines(void)
{
	COMMENT("MIPS specific thread_struct offsets.");
	OFFSET(THREAD_REG16, task_struct, thread.reg16);
	OFFSET(THREAD_REG17, task_struct, thread.reg17);
	OFFSET(THREAD_REG18, task_struct, thread.reg18);
	OFFSET(THREAD_REG19, task_struct, thread.reg19);
	OFFSET(THREAD_REG20, task_struct, thread.reg20);
	OFFSET(THREAD_REG21, task_struct, thread.reg21);
	OFFSET(THREAD_REG22, task_struct, thread.reg22);
	OFFSET(THREAD_REG23, task_struct, thread.reg23);
	OFFSET(THREAD_REG29, task_struct, thread.reg29);
	OFFSET(THREAD_REG30, task_struct, thread.reg30);
	OFFSET(THREAD_REG31, task_struct, thread.reg31);
	OFFSET(THREAD_STATUS, task_struct,
	       thread.cp0_status);
	OFFSET(THREAD_FPU, task_struct, thread.fpu);

	OFFSET(THREAD_BVADDR, task_struct, \
	       thread.cp0_badvaddr);
	OFFSET(THREAD_BUADDR, task_struct, \
	       thread.cp0_baduaddr);
	OFFSET(THREAD_ECODE, task_struct, \
	       thread.error_code);
	BLANK();
}

开发者ID:03199618，项目名称:linux，代码行数:26，代码来源:asm-offsets.c

示例15: H264BufferingSei

/*------------------------------------------------------------------------------
  H264BufferingSei()  Buffering period SEI message.
------------------------------------------------------------------------------*/
void H264BufferingSei(stream_s * sp, sei_s * sei)
{
    u8 *pPayloadSizePos;
    u32 startByteCnt;

    ASSERT(sei != NULL);

    if(sei->hrd == ENCHW_NO)
    {
        return;
    }

    H264NalBits(sp, SEI_BUFFERING_PERIOD, 8);
    COMMENT("last_payload_type_byte");

    pPayloadSizePos = sp->stream;

    H264NalBits(sp, 0xFF, 8);   /* this will be updated after we know exact payload size */
    COMMENT("last_payload_size_byte");

    startByteCnt = sp->byteCnt;
    sp->emulCnt = 0;    /* count emul_3_byte for this payload */

    H264ExpGolombUnsigned(sp, sei->seqId);
    COMMENT("seq_parameter_set_id");

    H264NalBits(sp, sei->icrd, sei->icrdLen);
    COMMENT("initial_cpb_removal_delay");

    H264NalBits(sp, sei->icrdo, sei->icrdoLen);
    COMMENT("initial_cpb_removal_delay_offset");

    if(sp->bufferedBits)
    {
        H264RbspTrailingBits(sp);
    }

    {
        u32 payload_size;

        payload_size = sp->byteCnt - startByteCnt - sp->emulCnt;
        *pPayloadSizePos = payload_size;
    }

    /* reset cpb_removal_delay */
    sei->crd = 0;
}

开发者ID:uplusplus，项目名称:rk_jpeg，代码行数:50，代码来源:H264Sei.c

示例16: EncJpegCOMHeader

/*------------------------------------------------------------------------------

    Function name: EncJpegCOMHeader

    Functional description: Sets COM header data

    Inputs:

    Outputs:

------------------------------------------------------------------------------*/
void EncJpegCOMHeader(stream_s * stream, jpegData_s * data)
{
    u32 j;

    EncJpegHeaderPutBits(stream, COM, 16);
    COMMENT("COM");

    EncJpegHeaderPutBits(stream, 2 + data->com.comLen, 16);
    COMMENT("Lc");

    for(j = 0; j < data->com.comLen; j++)
    {
        /* Qk table 0 */
        EncJpegHeaderPutBits(stream, data->com.pComment[j], 8);
        COMMENT("COM data");
    }
}

开发者ID:Astralix，项目名称:hardware_drivers，代码行数:28，代码来源:EncJpeg.c

示例17: output_sc32_defines

void output_sc32_defines(void)
{
	COMMENT("Linux 32-bit sigcontext offsets.");
	OFFSET(SC32_FPREGS, sigcontext32, sc_fpregs);
	OFFSET(SC32_FPC_CSR, sigcontext32, sc_fpc_csr);
	OFFSET(SC32_FPC_EIR, sigcontext32, sc_fpc_eir);
	BLANK();
}

开发者ID:03199618，项目名称:linux，代码行数:8，代码来源:asm-offsets.c

示例18: output_irq_cpustat_t_defines

void output_irq_cpustat_t_defines(void)
{
	COMMENT("Linux irq_cpustat_t offsets.");
	DEFINE(IC_SOFTIRQ_PENDING,
			offsetof(irq_cpustat_t, __softirq_pending));
	DEFINE(IC_IRQ_CPUSTAT_T, sizeof(irq_cpustat_t));
	BLANK();
}

开发者ID:laitianli，项目名称:loongson-linux-2.6.36-3_mips，代码行数:8，代码来源:asm-offsets.c

示例19: H264NalUnitHdr

/*------------------------------------------------------------------------------

	H264NalUnit

------------------------------------------------------------------------------*/
void H264NalUnitHdr(stream_s * stream, i32 nalRefIdc, nalUnitType_e nalUnitType,
                    true_e byteStream)
{
    if(byteStream == ENCHW_YES)
    {
        H264PutBits(stream, 0, 8);
        COMMENT("BYTE STREAM: leadin_zero_8bits");

        H264PutBits(stream, 0, 8);
        COMMENT("BYTE STREAM: Start_code_prefix");

        H264PutBits(stream, 0, 8);
        COMMENT("BYTE STREAM: Start_code_prefix");

        H264PutBits(stream, 1, 8);
        COMMENT("BYTE STREAM: Start_code_prefix");
    }

    H264PutBits(stream, 0, 1);
    COMMENT("forbidden_zero_bit");

    H264PutBits(stream, nalRefIdc, 2);
    COMMENT("nal_ref_idc");

    H264PutBits(stream, (i32) nalUnitType, 5);
    COMMENT("nal_unit_type");

    stream->zeroBytes = 0; /* we start new counter for zero bytes */

    return;
}

开发者ID:uplusplus，项目名称:rk_jpeg，代码行数:36，代码来源:H264NalUnit.c

示例20: COMMENT

std::string
GCodeWriter::set_speed(double F, const std::string &comment)
{
    std::ostringstream gcode;
    gcode << "G1 F" << F;
    COMMENT(comment);
    gcode << "\n";
    return gcode.str();
}

开发者ID:bjmckenz，项目名称:Slic3r，代码行数:9，代码来源:GCodeWriter.cpp

注：本文中的COMMENT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ COMP函数代码示例发布时间：2022-05-30

C++ COMMA_THROW函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9979|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9647|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ COMMENT函数代码示例

示例1: H264FillerSei

示例2: output_mm_defines

示例3: VideoSignalType

示例4: kedr_offsets_holder

示例5: EncJpegRestartInterval

示例6: output_thread_defines

示例7: skipWhiteSpace

示例8: output_thread_defines

示例9: E_NUM

示例10: main

示例11: output_octeon_cop2_state_defines

示例12: XYZF_NUM

示例13: main

示例14: output_thread_defines

示例15: H264BufferingSei

示例16: EncJpegCOMHeader

示例17: output_sc32_defines

示例18: output_irq_cpustat_t_defines

示例19: H264NalUnitHdr

示例20: COMMENT

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-35338

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053