C++ CMemFree函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CMemFree函数的典型用法代码示例。如果您正苦于以下问题：C++ CMemFree函数的具体用法？C++ CMemFree怎么用？C++ CMemFree使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CMemFree函数的18个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: PragmaAuxFini

void PragmaAuxFini( void )
{
    void    *junk;

    while( AuxList != NULL ) {
        junk = AuxList;
        if( AuxList->info != NULL ) {
            if( AuxList->info->use > 1 ) {
                AuxList->info->use--;
            } else {
                FreeAuxInfo( AuxList->info );
                if( !IsAuxInfoBuiltIn( AuxList->info ) ) {
                    CMemFree( AuxList->info );
                }
            }
        }
        AuxList = AuxList->next;
        CMemFree( junk );
    }

    FreeAuxInfo( &DefaultInfo );
    FreeAuxInfo( &WatcallInfo );
    FreeAuxInfo( &CdeclInfo );
    FreeAuxInfo( &PascalInfo );
    FreeAuxInfo( &SyscallInfo );
    FreeAuxInfo( &OptlinkInfo );
    FreeAuxInfo( &FortranInfo );
    FreeAuxInfo( &StdcallInfo );
    FreeAuxInfo( &FastcallInfo );
#if _CPU == 386
    FreeAuxInfo( &Far16CdeclInfo );
    FreeAuxInfo( &Far16PascalInfo );
#endif
}

开发者ID:ArmstrongJ，项目名称:open-watcom-v2，代码行数:34，代码来源:caux.c

示例2: freeAuxInfo

void freeAuxInfo( AUX_INFO *i ) // FREE ALL AUX INFO MEM
{
    if( !IsAuxParmsBuiltIn( i->parms ) ) {
        CMemFree( i->parms );
    }
    CMemFree( i->objname );
    CMemFree( i->code );
}

开发者ID:ABratovic，项目名称:open-watcom-v2，代码行数:8，代码来源:caux.c

示例3: createBrowseFile

static int createBrowseFile( FILE *browseFile )
{
    char            *ptr;
    size_t          bufsize;
    int             fileNum;
    unsigned        bufnum;
    dw_out_offset   sectionSize;
    dw_out_offset   sectionOffset[SECTION_COUNT];

    // calculate sections data size
    elf_header.e_shoff = sizeof( Elf32_Ehdr ) + sizeof( string_table );
    for( fileNum = 0; fileNum < SECTION_COUNT; fileNum++ ) {
        elf_header.e_shoff += dw_sections[inSect[fileNum]].length;
    }

    // write elf header
    mywrite( browseFile, &elf_header, sizeof( elf_header ) );

    // write string table
    mywrite( browseFile, string_table, sizeof( string_table ) );

    // calculate each of the sections, tracking offset
    // write each of the sections
    sectionOffset[0] = sizeof( elf_header ) + sizeof( string_table );
    for( fileNum = 0; fileNum < SECTION_COUNT; fileNum++ ) {
        if( fileNum > 0 )
            sectionOffset[fileNum] = sectionOffset[fileNum - 1] + dw_sections[inSect[fileNum - 1]].length;
        bufsize = C_DWARF_BUFSIZE;
        bufnum = 0;
        for( sectionSize = dw_sections[inSect[fileNum]].length; sectionSize > 0; sectionSize -= bufsize ) {
            if( bufsize > sectionSize )
                bufsize = sectionSize;
            ptr = dw_sections[inSect[fileNum]].bufptrs[bufnum];
            mywrite( browseFile, ptr, bufsize );
            CMemFree( ptr );
            ++bufnum;
        }
        if( dw_sections[inSect[fileNum]].bufptrs != NULL ) {
            CMemFree( dw_sections[inSect[fileNum]].bufptrs );
        }
    }

    // write section_header_index0
    mywrite( browseFile, &section_header_index0, sizeof( section_header_index0 ) );

    // write section_header_string_table
    mywrite( browseFile, &section_header_string_table, sizeof( section_header_string_table ) );

    // write rest of section headers
    for( fileNum = 0; fileNum < SECTION_COUNT; fileNum++ ) {
        section_header_template.sh_name     = string_table_offsets[fileNum];
        section_header_template.sh_offset   = sectionOffset[fileNum];
        section_header_template.sh_size     = dw_sections[inSect[fileNum]].length;
        mywrite( browseFile, &section_header_template, sizeof( section_header_template ) );
    }
    return( 0 );
}

开发者ID:ArmstrongJ，项目名称:open-watcom-v2，代码行数:57，代码来源:browsio.c

示例4: FreeUndefNames

static void FreeUndefNames( void )
{
    undef_names     *uname;

    for( ; (uname = UndefNames) != NULL; ) {
        UndefNames = uname->next;
        CMemFree( uname->name );
        CMemFree( uname );
    }
}

开发者ID:ABratovic，项目名称:open-watcom-v2，代码行数:10，代码来源:cmodel.c

示例5: PragEnding

void PragEnding(                // PROCESS END OF PRAGMA
    bool set_sym )              // - true ==> set SYMBOL's aux_info
{
    if( CurrEntry != NULL ) {
        if( CurrAlias != NULL ) {
            CurrInfo->use = CurrAlias->use;
            if( memcmp( CurrAlias, CurrInfo, sizeof( AUX_INFO ) ) == 0 ) {
                CurrEntry->info = CurrAlias;
                CurrAlias->use++;
                CMemFree( CurrInfo );
            } else {
                copyParms();
                AsmSysCopyCode();
                copyObjName();
                CurrInfo->use = 1;
                CurrEntry->info = CurrInfo;
            }
        }
        CurrEntry->next = AuxList;
        AuxList = CurrEntry;
        if( set_sym ) {
            ScopeAuxName( CurrEntry->name, CurrEntry->info );
        }
    }
}

开发者ID:Azarien，项目名称:open-watcom-v2，代码行数:25，代码来源:cpragma.c

示例6: AdvanceToken

static void AdvanceToken( void )
/******************************/
{
    CMemFree( SavedId );
    SavedId = NULL;
    CurToken = LAToken;
}

开发者ID:XVilka，项目名称:owp4v1copy，代码行数:7，代码来源:cpragx86.c

示例7: DumpFuncDefn

void DumpFuncDefn( void )
{
    TYPEPTR     typ;
    FNAMEPTR    flist;
    STRCHUNK    chunk;
    char        *result;

    typ = CurFunc->sym_type;
    DumpParmTags( typ->u.fn.parms, DefFile );
    flist = FileIndexToFName( CurFunc->src_loc.fno );
    fprintf( DefFile, "//#line \"%s\" %u\n",
                flist->name,
                CurFunc->src_loc.line );

    ChunkInit( &chunk );

    if( CurFunc->attribs.stg_class == SC_STATIC ) {
        put_keyword( T_STATIC, &chunk );
    } else {
        put_keyword( T_EXTERN, &chunk );
    }
    if( CurFunc->flags & SYM_TYPE_GIVEN ) {
        DumpBaseType( Object( typ ), &chunk );
    }
    DumpDecl( typ, CurFunc, &chunk );

    result = ChunkToStr( &chunk );
    fprintf( DefFile, "%s;\n", result );
    CMemFree( result );
}

开发者ID:ABratovic，项目名称:open-watcom-v2，代码行数:30，代码来源:cdump.c

示例8: PragDataSeg

static void PragDataSeg( void )                       /* 22-oct-92 */
/*****************************/
{
    char        *segname;
    segment_id  segment;

    if( CurToken == T_LEFT_PAREN ) {
        PPCTL_ENABLE_MACROS();
        segment = 0;
        NextToken();
        if( ( CurToken == T_STRING ) || ( CurToken == T_ID ) ) {
            segname = CStrSave( Buffer );
            NextToken();
            if( CurToken == T_COMMA ) {
                NextToken();
                if( ( CurToken == T_STRING ) || ( CurToken == T_ID ) ) {
                    segment = AddSegName( segname, Buffer, SEGTYPE_DATA );
                    NextToken();
                } else {
                    segment = AddSegName( segname, NULL, SEGTYPE_DATA );
                }
            } else {
                segment = AddSegName( segname, NULL, SEGTYPE_DATA );
            }
            CMemFree( segname );
        }
        PPCTL_DISABLE_MACROS();
        MustRecog( T_RIGHT_PAREN );
        DefDataSegment = segment;
    }
}

开发者ID:jossk，项目名称:open-watcom-v2，代码行数:31，代码来源:cpragma.c

示例9: getPackArgs

local void getPackArgs( void )
/****************************/
{
    struct pack_info    *pi;

    /* check to make sure it is a numeric token */
    if( PragIdRecog( "push" ) ) {                  /* 29-sep-94 */
        pi = (struct pack_info *)CMemAlloc( sizeof( struct pack_info ) );
        pi->next = PackInfo;
        pi->pack_amount = PackAmount;
        PackInfo = pi;
        if( CurToken == T_COMMA ) {
            PPCTL_ENABLE_MACROS();
            NextToken();
            PPCTL_DISABLE_MACROS();
            if( ExpectingConstant() ) {
                SetPackAmount();
            }
            NextToken();
        }
    } else if( PragIdRecog( "pop" ) ) {
        pi = PackInfo;
        if( pi != NULL ) {
            PackAmount = pi->pack_amount;
            PackInfo = pi->next;
            CMemFree( pi );
        }
    } else {
        CErr1( ERR_NOT_A_CONSTANT_EXPR );
    }
}

开发者ID:jossk，项目名称:open-watcom-v2，代码行数:31，代码来源:cpragma.c

示例10: ChunkSaveData

static void ChunkSaveData( STRCHUNK *pch, const char *data, size_t len )
{
    int   bytesleft;
    int   requestbytes;
    char *newdata;

    bytesleft = pch->maxsize - (pch->cursize+len+1);
    if( bytesleft <= 0 ) {
        requestbytes = -bytesleft;
        if( requestbytes < STRCHUNK_INCREMENT ) {
            requestbytes = STRCHUNK_INCREMENT;
        }
        requestbytes += pch->maxsize;
        newdata = CMemAlloc( requestbytes );
        if( pch->data ) {
            memcpy( newdata, pch->data, pch->cursize );
            CMemFree( pch->data );
        }
        pch->data = newdata;
        pch->maxsize = requestbytes;
    }
    memcpy( pch->data+pch->cursize, data, len );
    pch->cursize += len;
    pch->data[pch->cursize] = '\0';
}

开发者ID:jossk，项目名称:open-watcom-v2，代码行数:25，代码来源:cdump.c

示例11: PragManyRegSets

void PragManyRegSets(           // GET PRAGMA REGISTER SETS
    void )
{
    hw_reg_set buff[ MAXIMUM_PARMSETS ];
    int i;
    hw_reg_set list;
    hw_reg_set *sets;

    list = PragRegList();
    i = 0;
    while( !HW_CEqual( list, HW_EMPTY ) && ( i != MAXIMUM_PARMSETS ) ) {
        buff[ i++ ] = list;
        list = PragRegList();
    }
    if( !HW_CEqual( list, HW_EMPTY ) ) {
        CErr1( ERR_TOO_MANY_PARM_SETS );
    }
    HW_CAsgn( buff[i], HW_EMPTY );
    i++;
    i *= sizeof( hw_reg_set );
    sets = ( hw_reg_set * ) CMemAlloc( i );
    memcpy( sets, buff, i );
    if( !IsAuxParmsBuiltIn( CurrInfo->parms ) ) {
        CMemFree( CurrInfo->parms );
    }
    CurrInfo->parms = sets;
}

开发者ID:Azarien，项目名称:open-watcom-v2，代码行数:27，代码来源:cpragma.c

示例12: CMemAlloc

void *SafeRecurseCpp( func_sr rtn, void *arg )
/********************************************/
/* This code assumes NO parameters on the stack! */
{
    #define SAVE_SIZE   512     /* this must be smaller than the stack */

    void    *savearea;
    void    *retval;

    if( stackavail() < 0x2000 ) { /* stack getting low! */
        savearea = CMemAlloc( SAVE_SIZE );
        if( savearea != NULL ) {
            memcpy( bp(), savearea, SAVE_SIZE );
            memcpy( sp(), sp() + SAVE_SIZE, bp() - sp() );
            setbp( bp() + SAVE_SIZE );
            setsp( sp() + SAVE_SIZE );
            retval = rtn( arg );
            setsp( sp() - SAVE_SIZE );
            memcpy( sp() + SAVE_SIZE, sp(), bp() - sp() - SAVE_SIZE );
            setbp( bp() - SAVE_SIZE );
            memcpy( savearea, bp(), SAVE_SIZE );
            CMemFree( savearea );
            return( retval );
        }
    }
    return( rtn( arg ) );
}

开发者ID:ABratovic，项目名称:open-watcom-v2，代码行数:27，代码来源:stacksr.c

示例13: setTarget

static void setTarget( char **n, char *t )
{
    if( *n ) {
        CMemFree( *n );
    }
    *n = strupr( t );
}

开发者ID:andreiw，项目名称:open-watcom-v2，代码行数:7，代码来源:cmdlnany.c

示例14: pragmaFini

static void pragmaFini(         // FINISH PRAGMAS
    INITFINI* defn )            // - definition
{
    AUX_ENTRY       *next;
    AUX_ENTRY       *curr;
    AUX_INFO        *info;

    defn = defn;
    for( curr = AuxList; curr != NULL; curr = next ) {
        next = curr->next;
        info = curr->info;
        if( info != NULL ) {
            if( info->use > 1 ) {
                info->use--;
            } else {
                freeInfo( info );
#ifndef NDEBUG
                if( IsAuxInfoBuiltIn( info ) ) {
                    CFatal( "freeing a static calling convention info" );
                }
#endif
                if( !IsAuxInfoBuiltIn( info ) ) {
                    CMemFree( info );
                }
            }
        }
        CMemFree( curr );
    }
    freeInfo( &DefaultInfo );
    freeInfo( &CdeclInfo );
    freeInfo( &PascalInfo );
    freeInfo( &SyscallInfo );
    freeInfo( &OptlinkInfo );
    freeInfo( &StdcallInfo );
    freeInfo( &FastcallInfo );
#if _CPU == 386
    freeInfo( &Far16CdeclInfo );
    freeInfo( &Far16PascalInfo );
#endif
    freeInfo( &WatcallInfo );
    freeInfo( &FortranInfo );
    //CMemFreePtr( &FortranInfo.objname );
    AuxList = NULL;
    CgInfoFreeLibs();
    CgInfoFreeImports();
    CgInfoFreeImportsS();
}

开发者ID:jossk，项目名称:open-watcom-v2，代码行数:47，代码来源:cpragx86.c

示例15: pragIncludeAlias

// form: #pragma include_alias( "alias_name", "real_name" )
//       #pragma include_alias( <alias_name>, <real_name> )
//
// (1) causes include directives referencing alias_name to refer
//     to real_name instead
//
static void pragIncludeAlias( void )
{
    if( ExpectingToken( T_LEFT_PAREN ) ) {
        PPCTL_ENABLE_MACROS();
        NextToken();
        if( CurToken == T_STRING ) {
            char    *alias_name;

            alias_name = CMemAlloc( strlen( Buffer ) + 1 );
            strcpy( alias_name, Buffer );
            NextToken();
            if( ExpectingToken( T_COMMA ) ) {
                NextToken();
            }
            if( CurToken == T_STRING ) {
                IAliasAdd( alias_name, Buffer, false );
                NextToken();
            }
            CMemFree( alias_name );
        } else if( CurToken == T_LT ) {
            char    a_buf[82];
            char    r_buf[82];

            a_buf[0] = '\0';
            for( ;; ) {
                NextToken();
                if( CurToken == T_GT ) {
                    NextToken();
                    break;
                }
                if( CurToken == T_NULL ) {
                    break;
                }
                strncat( a_buf, Buffer, sizeof( a_buf ) - 2 );
            }
            if( ExpectingToken( T_COMMA ) ) {
                NextToken();
            }
            if( CurToken == T_LT ) {
                r_buf[0] = '\0';
                for( ;; ) {
                    NextToken();
                    if( CurToken == T_GT ) {
                        NextToken();
                        break;
                    }
                    if( CurToken == T_NULL ) {
                        break;
                    }
                    strncat( r_buf, Buffer, sizeof( r_buf ) - 2 );
                }
                IAliasAdd( a_buf, r_buf, true );
            }
        }
        PPCTL_DISABLE_MACROS();
        MustRecog( T_RIGHT_PAREN );
    }
}

开发者ID:Azarien，项目名称:open-watcom-v2，代码行数:64，代码来源:cpragma.c

示例16: PragObjNameInfo

void PragObjNameInfo(           // RECOGNIZE OBJECT NAME INFORMATION
    void )
{
    if( CurToken == T_STRING ) {
        CMemFree( CurrInfo->objname );
        CurrInfo->objname = strsave( Buffer );
        NextToken();
    }
}

开发者ID:Azarien，项目名称:open-watcom-v2，代码行数:9，代码来源:cpragma.c

示例17: dw_write

static void dw_write( dw_sectnum section, const void *block, dw_size_t len )
/********************************************************************/
{
    unsigned            bufnum;
    unsigned            endbufnum;
    C_DW_SECTION        *dwsect;
    char                **newbufptrs;
    unsigned            bufsize;
    char                *bufptr;

    dwsect = &DWSections[section];
    #ifdef __DD__
    //int i;
    printf( "\nDW_WRITE(%d:%d): offset: %d len: %d ",
        section,
        dwsect->length,
        dwsect->offset,
        len );
    //for( i = 0 ; i < len; i++ ) {
    //    printf( "%02x ", (int)((char *)block)[i] );
    //}
    #endif
    bufnum = dwsect->offset / C_DWARF_BUFSIZE;
    endbufnum = (dwsect->offset + len) / C_DWARF_BUFSIZE;
    if( endbufnum >= dwsect->bufcount ) {
        newbufptrs = (char**)CMemAlloc( (endbufnum + 1) * sizeof(char**) );
        if( dwsect->bufptrs != NULL ) {
            memcpy( newbufptrs,
                    dwsect->bufptrs,
                    dwsect->bufcount * sizeof(char**) );
            CMemFree( dwsect->bufptrs );
        }
        dwsect->bufptrs = newbufptrs;
        dwsect->bufcount = endbufnum + 1;
    }
    bufsize = C_DWARF_BUFSIZE - (dwsect->offset % C_DWARF_BUFSIZE);
    dwsect->offset += len;
    if( dwsect->offset > dwsect->length ) {
        dwsect->length = dwsect->offset;
    }
    while( len != 0 ) {
        bufptr = dwsect->bufptrs[bufnum];
        if( bufptr == NULL ) {
            bufptr = (char *)CMemAlloc( C_DWARF_BUFSIZE );
            dwsect->bufptrs[bufnum] = bufptr;
        }
        bufptr += C_DWARF_BUFSIZE - bufsize;
        if( len < bufsize )  bufsize = len;
        memcpy( bufptr, block, bufsize );
        block = (char *)block + bufsize;
        len -= bufsize;
        ++bufnum;                       // advance to next buffer
        bufsize = C_DWARF_BUFSIZE;      // buffer is full size
    }
}

开发者ID:jossk，项目名称:open-watcom-v2，代码行数:55，代码来源:browsio.c

示例18: PCHReadPragmas

pch_status PCHReadPragmas( void )
{
    unsigned    size;
    unsigned    max_index;
    unsigned    entry_len;
    unsigned    index;
    AUX_ENTRY   *e;
    AUX_ENTRY   *f;
    AUX_ENTRY   *next_f;
    AUX_INFO    *info;

    for( f = AuxList; f != NULL; f = next_f ) {
        next_f = f->next;
        freeAuxInfo( f->info );
        CMemFree( f->info );
        CMemFree( f );
    }
    max_index = PCHReadUInt();
    size = max_index * sizeof( AUX_INFO * );
    infoTranslate = CMemAlloc( size );
    memset( infoTranslate, 0, size );
    // read all aux_info
    for( index = PCH_FIRST_INDEX; index < max_index; ++index ) {
        if( index < PCH_FIRST_USER_INDEX ) {
            info = BuiltinAuxInfo + index - PCH_FIRST_INDEX;
        } else {
            info = CMemAlloc( sizeof( AUX_INFO ) );
        }
        infoTranslate[index] = info;
        readAuxInfo( info );
    }
    // read aux entries
    AuxList = NULL;
    for( ; (entry_len = PCHReadUInt()) != 0; ) {
        e = CMemAlloc( offsetof( AUX_ENTRY, name ) + entry_len + 1 );
        PCHRead( e->name, entry_len + 1 );
        e->info = PragmaMapIndex( PCHSetUInt( PCHReadUInt() ) );
        e->next = AuxList;
        AuxList = e;
    }
    return( PCHCB_OK );
}

开发者ID:ABratovic，项目名称:open-watcom-v2，代码行数:42，代码来源:caux.c

注：本文中的CMemFree函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。