C++ CL_KeyState函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CL_KeyState函数的典型用法代码示例。如果您正苦于以下问题：C++ CL_KeyState函数的具体用法？C++ CL_KeyState怎么用？C++ CL_KeyState使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CL_KeyState函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles( void ) {
	float	speed;
	
	if ( in_speed.active ) {
		speed = 0.001 * cls.frametime * cl_anglespeedkey->value;
	} else {
		speed = 0.001 * cls.frametime;
	}

	if ( !in_strafe.active ) {
		if ( cl_mYawOverride )
		{
			cl.viewangles[YAW] -= cl_mYawOverride*5.0f*speed*cl_yawspeed->value*CL_KeyState (&in_right);
			cl.viewangles[YAW] += cl_mYawOverride*5.0f*speed*cl_yawspeed->value*CL_KeyState (&in_left);
		}
		else
		{
			cl.viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
			cl.viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
		}
	}

	if ( cl_mPitchOverride )
	{
		cl.viewangles[PITCH] -= cl_mPitchOverride*5.0f*speed*cl_pitchspeed->value * CL_KeyState (&in_lookup);
		cl.viewangles[PITCH] += cl_mPitchOverride*5.0f*speed*cl_pitchspeed->value * CL_KeyState (&in_lookdown);
	}
	else
	{
		cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_lookup);
		cl.viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_lookdown);
	}
}

开发者ID:AlexCSilva，项目名称:jediacademy，代码行数:40，代码来源:cl_input.cpp

示例2: CL_BaseMove

/*
================
CL_BaseMove

Send the intended movement message to the server
================
*/
void CL_BaseMove (usercmd_t *cmd)
{	
	CL_AdjustAngles ();
	
	memset (cmd, 0, sizeof(*cmd));
	
	VectorCopy (cl.viewangles, cmd->angles);
	if (in_strafe.state & 1)
	{
		cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
		cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
	}

	cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
	cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);

	cmd->upmove += cl_upspeed.value * CL_KeyState (&in_up);
	cmd->upmove -= cl_upspeed.value * CL_KeyState (&in_down);

	if (! (in_klook.state & 1) )
	{	
		cmd->forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
		cmd->forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
	}	

//
// adjust for speed key
//
	if (in_speed.state & 1)
	{
		cmd->forwardmove *= cl_movespeedkey.value;
		cmd->sidemove *= cl_movespeedkey.value;
		cmd->upmove *= cl_movespeedkey.value;
	}	
}

开发者ID:DaneTheory，项目名称:quake，代码行数:42，代码来源:cl_input.c

示例3: CL_BaseMove

/*
================
CL_BaseMove

Send the intended movement message to the server
================
*/
void CL_BaseMove (usercmd_t *cmd)
{
	if (cl.v.cameramode)	// stuck in a different camera so don't move
	{
		memset (cmd, 0, sizeof(*cmd));
		return;
	}

	CL_AdjustAngles ();

	memset (cmd, 0, sizeof(*cmd));
	VectorCopy (cl.viewangles, cmd->angles);

	if (in_strafe.state & 1)
	{
//		cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
//		cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
		cmd->sidemove += 225 * CL_KeyState (&in_right);
		cmd->sidemove -= 225 * CL_KeyState (&in_left);
	}

//	cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
//	cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
	cmd->sidemove += 225 * CL_KeyState (&in_moveright);
	cmd->sidemove -= 225 * CL_KeyState (&in_moveleft);

	cmd->upmove += cl_upspeed.value * CL_KeyState (&in_up);
	cmd->upmove -= cl_upspeed.value * CL_KeyState (&in_down);

	if (! (in_klook.state & 1))
	{
//		cmd->forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
		cmd->forwardmove += 200 * CL_KeyState (&in_forward);
//		cmd->forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
		cmd->forwardmove -= 200 * CL_KeyState (&in_back);
	}

// adjust for speed key, but not if "always run" has been chosen
// speed key now acts as slow key when always run is chosen - OS
//	if ( ( (cl_forwardspeed.value > 200) ||(in_speed.state & 1)  || cl.spectator)
	if ( (((cl_forwardspeed.value > 200) ^ (in_speed.state & 1)) || cl.spectator)
					     && (cl.v.hasted <= 1) )
	{
		cmd->forwardmove *= cl_movespeedkey.value;
		cmd->sidemove *= cl_movespeedkey.value;
		cmd->upmove *= cl_movespeedkey.value;
	}

// Hasted player?
	if (cl.v.hasted)
	{
		cmd->forwardmove = cmd->forwardmove * cl.v.hasted;
		cmd->sidemove = cmd->sidemove * cl.v.hasted;
		cmd->upmove = cmd->upmove * cl.v.hasted;
	}

	cmd->light_level = cl.light_level;
}

开发者ID:svn2github，项目名称:uhexen2，代码行数:65，代码来源:cl_input.c

示例4: CL_BaseMove

/*
================
CL_BaseMove

Send the intended movement message to the server
================
*/
void CL_BaseMove (usercmd_t *cmd)
{	
	CL_AdjustAngles ();
	
	memset (cmd, 0, sizeof(*cmd));

	if (cl.v.cameramode)	// Stuck in a different camera so don't move
	{
		return;
	}
	
	VectorCopy (cl.viewangles, cmd->angles);
	if (in_strafe.state & 1)
	{
//		cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
//		cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
		cmd->sidemove += 225 * CL_KeyState (&in_right);
		cmd->sidemove -= 225 * CL_KeyState (&in_left);
	}

//	cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
//	cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);
	cmd->sidemove += 225 * CL_KeyState (&in_moveright);
	cmd->sidemove -= 225 * CL_KeyState (&in_moveleft);

	cmd->upmove += cl_upspeed.value * CL_KeyState (&in_up);
	cmd->upmove -= cl_upspeed.value * CL_KeyState (&in_down);

	if (! (in_klook.state & 1) )
	{	
//		cmd->forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
//		cmd->forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
		cmd->forwardmove += 200 * CL_KeyState (&in_forward);
		cmd->forwardmove -= 200 * CL_KeyState (&in_back);
	}	

//
// adjust for speed key
//
	if ((cl.spectator || cl_forwardspeed.value > 200 || in_speed.state & 1) && cl.v.hasted <= 1)
	{
		cmd->forwardmove *= cl_movespeedkey.value;
		cmd->sidemove *= cl_movespeedkey.value;
		cmd->upmove *= cl_movespeedkey.value;
	}	

	// Hasted player?
	if (cl.v.hasted)
	{
		cmd->forwardmove = cmd->forwardmove * cl.v.hasted;
		cmd->sidemove = cmd->sidemove * cl.v.hasted;
		cmd->upmove = cmd->upmove * cl.v.hasted;
	}

	cmd->light_level = cl.light_level;
}

开发者ID:bsmr-games，项目名称:Hexen2，代码行数:63，代码来源:cl_input.c

示例5: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
static void CL_AdjustAngles( void ) {
	double	speed;
	
	if ( in_speed.active ) {
		speed = 0.001 * cls.frametime * cl_anglespeedkey->value;
	} else {
		speed = 0.001 * cls.frametime;
	}

	if ( !in_strafe.active ) {
		cl.viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
		cl.viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
	}

	cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_lookup);
	cl.viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_lookdown);
}

开发者ID:qrealka，项目名称:ioq3，代码行数:24，代码来源:cl_input.c

示例6: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles( void ) {
	float speed;

	if ( kb[KB_SPEED].active ) {
		speed = 0.001 * cls.frametime * cl_anglespeedkey->value;
	} else {
		speed = 0.001 * cls.frametime;
	}

	if ( !kb[KB_STRAFE].active ) {
		cl.viewangles[YAW] -= speed * cl_yawspeed->value * CL_KeyState( &kb[KB_RIGHT] );
		cl.viewangles[YAW] += speed * cl_yawspeed->value * CL_KeyState( &kb[KB_LEFT] );
	}

	cl.viewangles[PITCH] -= speed * cl_pitchspeed->value * CL_KeyState( &kb[KB_LOOKUP] );
	cl.viewangles[PITCH] += speed * cl_pitchspeed->value * CL_KeyState( &kb[KB_LOOKDOWN] );
}

开发者ID:MAN-AT-ARMS，项目名称:iortcw-archive，代码行数:24，代码来源:cl_input.c

示例7: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles (void)
{
	float	speed;
	float	up, down;
	
	if (in_speed.state & 1)
		speed = host_frametime * cl_anglespeedkey.value;
	else
		speed = host_frametime;

	if (!(in_strafe.state & 1))
	{
		cl.viewangles[YAW] -= speed*cl_yawspeed.value*CL_KeyState (&in_right);
		cl.viewangles[YAW] += speed*cl_yawspeed.value*CL_KeyState (&in_left);
		cl.viewangles[YAW] = anglemod(cl.viewangles[YAW]);
	}
	if (in_klook.state & 1)
	{
		V_StopPitchDrift ();
		cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * CL_KeyState (&in_forward);
		cl.viewangles[PITCH] += speed*cl_pitchspeed.value * CL_KeyState (&in_back);
	}

	// FIXME: This is a cheap way of doing this, it belongs in V_CalcViewRoll
	// but I don't see where I can get the yaw velocity, I have to get on to other things so here it is

	if ((CL_KeyState (&in_left)!=0) && (cl.v.movetype==MOVETYPE_FLY))
		cl.idealroll=-10;
	else if ((CL_KeyState (&in_right)!=0) && (cl.v.movetype==MOVETYPE_FLY))
		cl.idealroll=10;
	else
		cl.idealroll=0;

	
	up = CL_KeyState (&in_lookup);
	down = CL_KeyState(&in_lookdown);
	
	cl.viewangles[PITCH] -= speed*cl_pitchspeed.value * up;
	cl.viewangles[PITCH] += speed*cl_pitchspeed.value * down;

	if (up || down)
		V_StopPitchDrift ();
		
	if (cl.viewangles[PITCH] > 80)
		cl.viewangles[PITCH] = 80;
	if (cl.viewangles[PITCH] < -70)
		cl.viewangles[PITCH] = -70;

	if (cl.viewangles[ROLL] > 50)
		cl.viewangles[ROLL] = 50;
	if (cl.viewangles[ROLL] < -50)
		cl.viewangles[ROLL] = -50;
		
}

开发者ID:elhobbs，项目名称:hexen2，代码行数:61，代码来源:CL_INPUT.C

示例8: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles (void)
{
	float	speed;
	float	up, down;
	
	if (in_speed.state & 1)
		speed = cls.netFrameTime * cl_anglespeedkey->value;
	else
		speed = cls.netFrameTime;

	if (!(in_strafe.state & 1))
	{
		cl.viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
		cl.viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
	}
	if (in_klook.state & 1)
	{
		cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_forward);
		cl.viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_back);
	}
	
	up = CL_KeyState (&in_lookup);
	down = CL_KeyState(&in_lookdown);
	
	cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * up;
	cl.viewangles[PITCH] += speed*cl_pitchspeed->value * down;
}

开发者ID:n1ckn4m3，项目名称:kmquake2megacoop，代码行数:34，代码来源:cl_input.c

示例9: Bot_CL_KeyMove

void Bot_CL_KeyMove(  )
{
	int     forwardmove = 0, sidemove = 0, upmove = 0;
	int     buttons = 0;

	buttons = ( ( self->s.v.button0 ) ? 1 : 0 ) + ( ( self->s.v.button2 ) ? 2 : 0 );

	sidemove += self->maxstrafespeed * CL_KeyState( KEY_MOVERIGHT );
	sidemove -= self->maxstrafespeed * CL_KeyState( KEY_MOVELEFT );

	upmove += 200 * CL_KeyState( KEY_MOVEUP );
	upmove -= 200 * CL_KeyState( KEY_MOVEDOWN );

	forwardmove += self->maxfbspeed * CL_KeyState( KEY_MOVEFORWARD );
	forwardmove -= self->maxfbspeed * CL_KeyState( KEY_MOVEBACK );

	if ( self->s.v.v_angle[0] > 80 )
		self->s.v.v_angle[0] = 80;
	else
	{
		if ( self->s.v.v_angle[0] < -70 )
			self->s.v.v_angle[0] = -70;
	}

	//self->s.v.v_angle[2] = 0;
	self->s.v.v_angle[1] = anglemod( self->s.v.v_angle[1] );

	trap_SetBotCMD( NUM_FOR_EDICT( self ), bot_frametime * 1000,
			PASSVEC3(self->s.v.v_angle),
			forwardmove, sidemove, upmove, buttons, self->s.v.impulse );
}

开发者ID:stayoutEE，项目名称:TF2003-qvm，代码行数:31，代码来源:qw.c

示例10: CL_AddAnglesFromKeys

/*
* CL_AddAnglesFromKeys
*/
static void CL_AddAnglesFromKeys( int frametime )
{
	float speed;

	if( !frametime )
		return;

	if( in_speed.state & 1 )
		speed = ( (float)frametime * 0.001f ) * cl_anglespeedkey->value;
	else
		speed = (float)frametime * 0.001f;

	if( !( in_strafe.state & 1 ) )
	{
		cl.viewangles[YAW] -= speed * cl_yawspeed->value * CL_KeyState( &in_right );
		cl.viewangles[YAW] += speed * cl_yawspeed->value * CL_KeyState( &in_left );
	}
	if( in_klook.state & 1 )
	{
		cl.viewangles[PITCH] -= speed * cl_pitchspeed->value * CL_KeyState( &in_forward );
		cl.viewangles[PITCH] += speed * cl_pitchspeed->value * CL_KeyState( &in_back );
	}

	cl.viewangles[PITCH] -= speed * cl_pitchspeed->value * CL_KeyState( &in_lookup );
	cl.viewangles[PITCH] += speed * cl_pitchspeed->value * CL_KeyState( &in_lookdown );
}

开发者ID:ewirch，项目名称:qfusion，代码行数:29，代码来源:cl_input.c

示例11: CL_BaseMove

void CL_BaseMove (usercmd_t *cmd)
{
	if (cls.signon != SIGNONS)
		return;

	
	if (deathcam_active)
		CL_AdjustAnglesWhenYoureDead ();
	else
		CL_AdjustAngles ();

	Q_memset (cmd, 0, sizeof(*cmd));

	if (in_strafe.state & 1)
	{
		cmd->sidemove += cl_sidespeed->value * CL_KeyState (&in_right);
		cmd->sidemove -= cl_sidespeed->value * CL_KeyState (&in_left);
	}

	cmd->sidemove += cl_sidespeed->value * CL_KeyState (&in_moveright);
	cmd->sidemove -= cl_sidespeed->value * CL_KeyState (&in_moveleft);

	cmd->upmove += cl_upspeed->value * CL_KeyState (&in_up);
	cmd->upmove -= cl_upspeed->value * CL_KeyState (&in_down);

	if (! (in_klook.state & 1) )
	{
		cmd->forwardmove += cl_forwardspeed->value * CL_KeyState (&in_forward);
		cmd->forwardmove -= cl_backspeed->value * CL_KeyState (&in_back);
	}

	// adjust for speed key
	if (in_speed.state & 1)
	{
		cmd->forwardmove *= cl_movespeedkey->value;
		cmd->sidemove *= cl_movespeedkey->value;
		cmd->upmove *= cl_movespeedkey->value;
	}

	// react to onground state changes (for gun bob)
	if (cl.onground)
	{
		if (!cl.oldonground)
			cl.hitgroundtime = cl.time;
		cl.lastongroundtime = cl.time;
	}
	cl.oldonground = cl.onground;
}

开发者ID:eukos16，项目名称:NGUNIX，代码行数:48，代码来源:cl_input.c

示例12: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles (void)
{
	float	speed;
	float	up, down;

	if (in_speed.state & 1)
// 2001-10-20 TIMESCALE extension by Tomaz/Maddes  start
//		speed = host_frametime * cl_anglespeedkey->value;
		speed = host_org_frametime * cl_anglespeedkey->value;
// 2001-10-20 TIMESCALE extension by Tomaz/Maddes  end
	else
// 2001-10-20 TIMESCALE extension by Tomaz/Maddes  start
//		speed = host_frametime;
		speed = host_org_frametime;
// 2001-10-20 TIMESCALE extension by Tomaz/Maddes  end

	cl.viewangles[ROLL] -= speed*cl_yawspeed->value*CL_KeyState (&in_tiltright);
	cl.viewangles[ROLL] += speed*cl_yawspeed->value*CL_KeyState (&in_tiltleft);

	if (!(in_strafe.state & 1))
	{
		cl.viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
		cl.viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
		cl.viewangles[YAW] = anglemod(cl.viewangles[YAW]);
	}
	if (in_klook.state & 1)
	{
		V_StopPitchDrift ();
		cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_forward);
		cl.viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_back);
	}

	up = CL_KeyState (&in_lookup);
	down = CL_KeyState(&in_lookdown);

	cl.viewangles[PITCH] -= speed*cl_pitchspeed->value * up;
	cl.viewangles[PITCH] += speed*cl_pitchspeed->value * down;

	if (up || down)
		V_StopPitchDrift ();

	if (cl.viewangles[PITCH] > (int)m_lockdown->value)
		cl.viewangles[PITCH] = (int)m_lockdown->value;
	if (cl.viewangles[PITCH] < (int)m_lockup->value)
		cl.viewangles[PITCH] = (int)m_lockup->value;

}

开发者ID:eukos16，项目名称:NGUNIX，代码行数:54，代码来源:cl_input.c

示例13: CL_KeyMove

/*
================
CL_KeyMove

Sets the usercmd_t based on key states
================
*/
void
CL_KeyMove(usercmd_t * cmd)
{
  int movespeed;
  int forward, side, up;

  //
  // adjust for speed key / running
  // the walking flag is to keep animations consistant
  // even during acceleration and develeration
  //
  if (in_speed.active ^ cl_run->integer)
  {
    movespeed = 127;
    cmd->buttons &= ~BUTTON_WALKING;
  }
  else
  {
    cmd->buttons |= BUTTON_WALKING;
    movespeed = 64;
  }

  forward = 0;
  side = 0;
  up = 0;
  if (in_strafe.active)
  {
    side += movespeed * CL_KeyState(&in_right);
    side -= movespeed * CL_KeyState(&in_left);
  }

  side += movespeed * CL_KeyState(&in_moveright);
  side -= movespeed * CL_KeyState(&in_moveleft);


  up += movespeed * CL_KeyState(&in_up);
  up -= movespeed * CL_KeyState(&in_down);

  forward += movespeed * CL_KeyState(&in_forward);
  forward -= movespeed * CL_KeyState(&in_back);

  cmd->forwardmove = ClampChar(forward);
  cmd->rightmove = ClampChar(side);
  cmd->upmove = ClampChar(up);
}

开发者ID:lrq3000，项目名称:ioquake3-anti-cheat，代码行数:52，代码来源:cl_input.c

示例14: CL_AdjustAngles

// Moves the local angle positions.
void CL_AdjustAngles (void)
{
	float basespeed, speed, up, down, frametime;

	if (Movie_IsCapturing() && movie_steadycam.value)
		frametime = movie_fps.value > 0 ? 1.0 / movie_fps.value : 1 / 30.0;
	else
		frametime = cls.trueframetime;

	basespeed = ((in_speed.state & 1) ? cl_anglespeedkey.value : 1);

	if (!(in_strafe.state & 1))
	{
		speed = basespeed * cl_yawspeed.value;
		if ((cl.fpd & FPD_LIMIT_YAW) || allow_scripts.value < 2)
			speed = bound(-900, speed, 900);
		speed *= frametime;
		cl.viewangles[YAW] -= speed * CL_KeyState(&in_right, true);
		cl.viewangles[YAW] += speed * CL_KeyState(&in_left, true);
		if (cl.viewangles[YAW] < 0)
			cl.viewangles[YAW] += 360.0;
		else if (cl.viewangles[YAW] > 360)
			cl.viewangles[YAW] -= 360.0;
	}

	speed = basespeed * cl_pitchspeed.value;
	if ((cl.fpd & FPD_LIMIT_PITCH) || allow_scripts.value == 0)
		speed = bound(-700, speed, 700);
	speed *= frametime;
	if (in_klook.state & 1)
	{
		V_StopPitchDrift ();
		cl.viewangles[PITCH] -= speed * CL_KeyState(&in_forward, true);
		cl.viewangles[PITCH] += speed * CL_KeyState(&in_back, true);
	}


	up = CL_KeyState(&in_lookup, true);
	down = CL_KeyState(&in_lookdown, true);
	cl.viewangles[PITCH] -= speed * up;
	cl.viewangles[PITCH] += speed * down;
	if (up || down)
		V_StopPitchDrift();

	if (cl.viewangles[PITCH] > cl.maxpitch)
		cl.viewangles[PITCH] = cl.maxpitch;
	if (cl.viewangles[PITCH] < cl.minpitch)
		cl.viewangles[PITCH] = cl.minpitch;

	//cl.viewangles[PITCH] = bound(cl.min!pitch, cl.viewangles[PITCH], cl.ma!xpitch);
	cl.viewangles[ROLL] = bound(-50, cl.viewangles[ROLL], 50);
}

开发者ID:jite，项目名称:jquake，代码行数:53，代码来源:cl_input.c

示例15: CL_AddMovementFromKeys

/*
* CL_AddMovementFromKeys
*/
static void CL_AddMovementFromKeys( vec3_t movement )
{
	if( in_strafe.state & 1 )
	{
		movement[0] += ( float )CL_KeyState( &in_right );
		movement[0] -= ( float )CL_KeyState( &in_left );
	}

	movement[0] += ( float )CL_KeyState( &in_moveright );
	movement[0] -= ( float )CL_KeyState( &in_moveleft );

	movement[2] += ( float )CL_KeyState( &in_up );
	movement[2] -= ( float )CL_KeyState( &in_down );

	if( !( in_klook.state & 1 ) )
	{
		movement[1] += ( float )CL_KeyState( &in_forward );
		movement[1] -= ( float )CL_KeyState( &in_back );
	}
}

开发者ID:tenght，项目名称:qfusion，代码行数:23，代码来源:cl_input.c

示例16: CL_BaseMove

/*
================
CL_BaseMove

Send the intended movement message to the server
================
*/
void CL_BaseMove (usercmd_t *cmd)
{	
	if (cls.signon != SIGNONS)
		return;
			
	CL_AdjustAngles ();
	
	Q_memset (cmd, 0, sizeof(*cmd));
	
	if (in_strafe.state & 1)
	{
		cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_right);
		cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_left);
	}

	cmd->sidemove += cl_sidespeed.value * CL_KeyState (&in_moveright);
	cmd->sidemove -= cl_sidespeed.value * CL_KeyState (&in_moveleft);

	cmd->upmove += cl_upspeed.value * CL_KeyState (&in_up);
	cmd->upmove -= cl_upspeed.value * CL_KeyState (&in_down);

	if (! (in_klook.state & 1) )
	{	
		cmd->forwardmove += cl_forwardspeed.value * CL_KeyState (&in_forward);
		cmd->forwardmove -= cl_backspeed.value * CL_KeyState (&in_back);
	}	

//
// adjust for speed key
//
	if (in_speed.state & 1)
	{
		cmd->forwardmove *= cl_movespeedkey.value;
		cmd->sidemove *= cl_movespeedkey.value;
		cmd->upmove *= cl_movespeedkey.value;
	}

#ifdef QUAKE2
	cmd->lightlevel = cl.light_level;
#endif
}

开发者ID:darkduke606，项目名称:DQuakePlus，代码行数:48，代码来源:cl_input.c

示例17: CL_AdjustAngles

/*
================
CL_AdjustAngles

Moves the local angle positions
================
*/
void CL_AdjustAngles ( float frametime, float *viewangles )
{
	float	speed;
	float	up, down;
	
	if (in_speed.state & 1)
	{
		speed = frametime * cl_anglespeedkey->value;
	}
	else
	{
		speed = frametime;
	}

	// Ricochet: Don't let them move the mouse when they're in spectator mode
	if ( bCanMoveMouse() == FALSE ) 
		 return;

	if (!(in_strafe.state & 1))
	{
		viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
		viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
		viewangles[YAW] = anglemod(viewangles[YAW]);
	}
	if (in_klook.state & 1)
	{
		V_StopPitchDrift ();
		viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_forward);
		viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_back);
	}
	
	up = CL_KeyState (&in_lookup);
	down = CL_KeyState(&in_lookdown);
	
	viewangles[PITCH] -= speed*cl_pitchspeed->value * up;
	viewangles[PITCH] += speed*cl_pitchspeed->value * down;

	if (up || down)
		V_StopPitchDrift ();
		
	if (viewangles[PITCH] > cl_pitchdown->value)
		viewangles[PITCH] = cl_pitchdown->value;
	if (viewangles[PITCH] < -cl_pitchup->value)
		viewangles[PITCH] = -cl_pitchup->value;

	if (viewangles[ROLL] > 50)
		viewangles[ROLL] = 50;
	if (viewangles[ROLL] < -50)
		viewangles[ROLL] = -50;
}

开发者ID:ET-NiK，项目名称:amxxgroup，代码行数:57，代码来源:input.cpp

示例18: CL_BaseMove

/*
================
CL_BaseMove

Build the intended movement vector
================
*/
static void CL_BaseMove( vec3_t move ) {
    if( in_strafe.state & 1 ) {
        move[1] += cl_sidespeed->value * CL_KeyState( &in_right );
        move[1] -= cl_sidespeed->value * CL_KeyState( &in_left );
    }

    move[1] += cl_sidespeed->value * CL_KeyState( &in_moveright );
    move[1] -= cl_sidespeed->value * CL_KeyState( &in_moveleft );

    move[2] += cl_upspeed->value * CL_KeyState( &in_up );
    move[2] -= cl_upspeed->value * CL_KeyState( &in_down );

    if( !( in_klook.state & 1 ) ) {
        move[0] += cl_forwardspeed->value * CL_KeyState( &in_forward );
        move[0] -= cl_forwardspeed->value * CL_KeyState( &in_back );
    }

// adjust for speed key / running
    if( ( in_speed.state & 1 ) ^ cl_run->integer ) {
        VectorScale( move, 2, move );
    }
}

开发者ID:Bad-ptr，项目名称:q2pro，代码行数:29，代码来源:cl_input.c

示例19: CL_AddMovementFromKeys

/*
* CL_AddMovementFromKeys
*/
static void CL_AddMovementFromKeys( short *forwardmove, short *sidemove, short *upmove, int frametime )
{
	if( !frametime )
		return;

	if( in_strafe.state & 1 )
	{
		*sidemove += frametime * CL_KeyState( &in_right );
		*sidemove -= frametime * CL_KeyState( &in_left );
	}

	*sidemove += frametime * CL_KeyState( &in_moveright );
	*sidemove -= frametime * CL_KeyState( &in_moveleft );

	*upmove += frametime * CL_KeyState( &in_up );
	*upmove -= frametime * CL_KeyState( &in_down );

	if( !( in_klook.state & 1 ) )
	{
		*forwardmove += frametime * CL_KeyState( &in_forward );
		*forwardmove -= frametime * CL_KeyState( &in_back );
	}
}

开发者ID:ewirch，项目名称:qfusion，代码行数:26，代码来源:cl_input.c

示例20: CL_AdjustAngles

================
*/
void CL_AdjustAngles ( float frametime, float *viewangles )
{
	float	speed;
	float	up, down;
	
	if (in_speed.state & 1)
	{
		speed = frametime * cl_anglespeedkey->value;
	}
	else
	{
		speed = frametime;
	}

	if (!(in_strafe.state & 1))
	{
		viewangles[YAW] -= speed*cl_yawspeed->value*CL_KeyState (&in_right);
		viewangles[YAW] += speed*cl_yawspeed->value*CL_KeyState (&in_left);
		viewangles[YAW] = anglemod(viewangles[YAW]);
	}
	if (in_klook.state & 1)
	{
		V_StopPitchDrift ();
		viewangles[PITCH] -= speed*cl_pitchspeed->value * CL_KeyState (&in_forward);
		viewangles[PITCH] += speed*cl_pitchspeed->value * CL_KeyState (&in_back);
	}
	
	up = CL_KeyState (&in_lookup);
	down = CL_KeyState(&in_lookdown);
	
	viewangles[PITCH] -= speed*cl_pitchspeed->value * up;
	viewangles[PITCH] += speed*cl_pitchspeed->value * down;

	if (up || down)
		V_StopPitchDrift ();
		
	if (viewangles[PITCH] > cl_pitchdown->value)
		viewangles[PITCH] = cl_pitchdown->value;
	if (viewangles[PITCH] < -cl_pitchup->value)
		viewangles[PITCH] = -cl_pitchup->value;

	if (viewangles[ROLL] > 50)
		viewangles[ROLL] = 50;
	if (viewangles[ROLL] < -50)

开发者ID:mittorn，项目名称:hlwe_src，代码行数:46，代码来源:input.cpp

注：本文中的CL_KeyState函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CL_LOG_DEBUG_ERROR函数代码示例发布时间：2022-05-30

C++ CL_GetGlconfig函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9979|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9647|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ CL_KeyState函数代码示例

示例1: CL_AdjustAngles

示例2: CL_BaseMove

示例3: CL_BaseMove

示例4: CL_BaseMove

示例5: CL_AdjustAngles

示例6: CL_AdjustAngles

示例7: CL_AdjustAngles

示例8: CL_AdjustAngles

示例9: Bot_CL_KeyMove

示例10: CL_AddAnglesFromKeys

示例11: CL_BaseMove

示例12: CL_AdjustAngles

示例13: CL_KeyMove

示例14: CL_AdjustAngles

示例15: CL_AddMovementFromKeys

示例16: CL_BaseMove

示例17: CL_AdjustAngles

示例18: CL_BaseMove

示例19: CL_AddMovementFromKeys

示例20: CL_AdjustAngles

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-35338

librespeed/speedtest: Self-hosted Speedt

avehtari/BDA_m_demos: Bayesian Data Anal

四维彩超怎么看性别？四维看男孩女孩诀窍

medfreeman/markdown-it-toc-and-anchor: m

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053