C++ CIO_TRACE_EVENT函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中CIO_TRACE_EVENT函数的典型用法代码示例。如果您正苦于以下问题：C++ CIO_TRACE_EVENT函数的具体用法？C++ CIO_TRACE_EVENT怎么用？C++ CIO_TRACE_EVENT使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了CIO_TRACE_EVENT函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: cio_cancel

int
cio_cancel (struct subchannel *sch)
{
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT(2, "cancelIO");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	ccode = xsch (sch->schid);

	CIO_HEX_EVENT(2, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:		
		
		if (cio_update_schib(sch))
			return -ENODEV;
		return 0;
	case 1:		
		return -EBUSY;
	case 2:		
		return -EINVAL;
	default:	
		return -ENODEV;
	}
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:29，代码来源:cio.c

示例2: cio_disable_subchannel

int cio_disable_subchannel(struct subchannel *sch)
{
	int retry;
	int ret;

	CIO_TRACE_EVENT(2, "dissch");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	if (sch_is_pseudo_sch(sch))
		return 0;
	if (cio_update_schib(sch))
		return -ENODEV;

	sch->config.ena = 0;

	for (retry = 0; retry < 3; retry++) {
		ret = cio_commit_config(sch);
		if (ret == -EBUSY) {
			struct irb irb;
			if (tsch(sch->schid, &irb) != 0)
				break;
		} else
			break;
	}
	CIO_HEX_EVENT(2, &ret, sizeof(ret));
	return ret;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:27，代码来源:cio.c

示例3: cio_halt

int
cio_halt(struct subchannel *sch)
{
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT(2, "haltIO");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	ccode = hsch (sch->schid);

	CIO_HEX_EVENT(2, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_HALT_PEND;
		return 0;
	case 1:		
	case 2:		
		return -EBUSY;
	default:		
		return -ENODEV;
	}
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:26，代码来源:cio.c

示例4: cio_resume

/*
 * resume suspended I/O operation
 */
int
cio_resume (struct subchannel *sch)
{
	char dbf_txt[15];
	int ccode;

	CIO_TRACE_EVENT (4, "resIO");
	CIO_TRACE_EVENT (4, sch->dev.bus_id);

	ccode = rsch (sch->irq);

	sprintf (dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT (4, dbf_txt);

	switch (ccode) {
	case 0:
		sch->schib.scsw.actl |= SCSW_ACTL_RESUME_PEND;
		return 0;
	case 1:
		return -EBUSY;
	case 2:
		return -EINVAL;
	default:
		/*
		 * useless to wait for request completion
		 *  as device is no longer operational !
		 */
		return -ENODEV;
	}
}

开发者ID:gnensis，项目名称:linux-2.6.15，代码行数:33，代码来源:cio.c

示例5: cio_enable_subchannel

/**
 * cio_enable_subchannel - enable a subchannel.
 * @sch: subchannel to be enabled
 * @intparm: interruption parameter to set
 */
int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
	int ret;

	CIO_TRACE_EVENT(2, "ensch");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	if (sch_is_pseudo_sch(sch))
		return -EINVAL;
	if (cio_update_schib(sch))
		return -ENODEV;

	sch->config.ena = 1;
	sch->config.isc = sch->isc;
	sch->config.intparm = intparm;

	ret = cio_commit_config(sch);
	if (ret == -EIO) {
		/*
		 * Got a program check in msch. Try without
		 * the concurrent sense bit the next time.
		 */
		sch->config.csense = 0;
		ret = cio_commit_config(sch);
	}
	CIO_HEX_EVENT(2, &ret, sizeof(ret));
	return ret;
}

开发者ID:IDM350，项目名称:linux，代码行数:33，代码来源:cio.c

示例6: cio_halt

/*
 * halt I/O operation
 */
int
cio_halt(struct subchannel *sch)
{
	char dbf_txt[15];
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT (2, "haltIO");
	CIO_TRACE_EVENT (2, sch->dev.bus_id);

	/*
	 * Issue "Halt subchannel" and process condition code
	 */
	ccode = hsch (sch->irq);

	sprintf (dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT (2, dbf_txt);

	switch (ccode) {
	case 0:
		sch->schib.scsw.actl |= SCSW_ACTL_HALT_PEND;
		return 0;
	case 1:		/* status pending */
	case 2:		/* busy */
		return -EBUSY;
	default:		/* device not operational */
		return -ENODEV;
	}
}

开发者ID:gnensis，项目名称:linux-2.6.15，代码行数:34，代码来源:cio.c

示例7: cio_clear

/*
 * Clear I/O operation
 */
int
cio_clear(struct subchannel *sch)
{
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT(2, "clearIO");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	/*
	 * Issue "Clear subchannel" and process condition code
	 */
	ccode = csch (sch->schid);

	CIO_HEX_EVENT(2, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_CLEAR_PEND;
		return 0;
	default:		/* device not operational */
		return -ENODEV;
	}
}

开发者ID:IDM350，项目名称:linux，代码行数:29，代码来源:cio.c

示例8: cio_cancel

/*
 * Function: cio_cancel
 * Issues a "Cancel Subchannel" on the specified subchannel
 * Note: We don't need any fancy intparms and flags here
 *	 since xsch is executed synchronously.
 * Only for common I/O internal use as for now.
 */
int
cio_cancel (struct subchannel *sch)
{
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT(2, "cancelIO");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	ccode = xsch (sch->schid);

	CIO_HEX_EVENT(2, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:		/* success */
		/* Update information in scsw. */
		if (cio_update_schib(sch))
			return -ENODEV;
		return 0;
	case 1:		/* status pending */
		return -EBUSY;
	case 2:		/* not applicable */
		return -EINVAL;
	default:	/* not oper */
		return -ENODEV;
	}
}

开发者ID:IDM350，项目名称:linux，代码行数:36，代码来源:cio.c

示例9: cio_halt

/*
 * halt I/O operation
 */
int
cio_halt(struct subchannel *sch)
{
	int ccode;

	if (!sch)
		return -ENODEV;

	CIO_TRACE_EVENT(2, "haltIO");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	/*
	 * Issue "Halt subchannel" and process condition code
	 */
	ccode = hsch (sch->schid);

	CIO_HEX_EVENT(2, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_HALT_PEND;
		return 0;
	case 1:		/* status pending */
	case 2:		/* busy */
		return -EBUSY;
	default:		/* device not operational */
		return -ENODEV;
	}
}

开发者ID:IDM350，项目名称:linux，代码行数:32，代码来源:cio.c

示例10: cio_resume

/*
 * resume suspended I/O operation
 */
int
cio_resume (struct subchannel *sch)
{
	int ccode;

	CIO_TRACE_EVENT(4, "resIO");
	CIO_TRACE_EVENT(4, dev_name(&sch->dev));

	ccode = rsch (sch->schid);

	CIO_HEX_EVENT(4, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_RESUME_PEND;
		return 0;
	case 1:
		return -EBUSY;
	case 2:
		return -EINVAL;
	default:
		/*
		 * useless to wait for request completion
		 *  as device is no longer operational !
		 */
		return -ENODEV;
	}
}

开发者ID:IDM350，项目名称:linux，代码行数:31，代码来源:cio.c

示例11: cio_cancel

/*
 * Function: cio_cancel
 * Issues a "Cancel Subchannel" on the specified subchannel
 * Note: We don't need any fancy intparms and flags here
 *	 since xsch is executed synchronously.
 * Only for common I/O internal use as for now.
 */
int
cio_cancel (struct subchannel *sch)
{
	char dbf_txt[15];
	int ccode;

	if (!sch)
		return -ENODEV;

	sprintf (dbf_txt, "cancelIO%x", sch->irq);
	CIO_TRACE_EVENT (2, dbf_txt);

	ccode = xsch (sch->irq);

	sprintf (dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT (2, dbf_txt);

	switch (ccode) {
	case 0:		/* success */
		/* Update information in scsw. */
		stsch (sch->irq, &sch->schib);
		return 0;
	case 1:		/* status pending */
		return -EBUSY;
	case 2:		/* not applicable */
		return -EINVAL;
	default:	/* not oper */
		return -ENODEV;
	}
}

开发者ID:xricson，项目名称:knoppix，代码行数:37，代码来源:cio.c

示例12: cio_clear

/*
 * Clear I/O operation
 */
int
cio_clear(struct subchannel *sch)
{
	char dbf_txt[15];
	int ccode;

	if (!sch)
		return -ENODEV;

	sprintf (dbf_txt, "clearIO%x", sch->irq);
	CIO_TRACE_EVENT (2, dbf_txt);

	/*
	 * Issue "Clear subchannel" and process condition code
	 */
	ccode = csch (sch->irq);

	sprintf (dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT (2, dbf_txt);

	switch (ccode) {
	case 0:
		sch->schib.scsw.actl |= SCSW_ACTL_CLEAR_PEND;
		return 0;
	default:		/* device not operational */
		return -ENODEV;
	}
}

开发者ID:xricson，项目名称:knoppix，代码行数:31，代码来源:cio.c

示例13: cio_enable_subchannel

int cio_enable_subchannel(struct subchannel *sch, u32 intparm)
{
	int retry;
	int ret;

	CIO_TRACE_EVENT(2, "ensch");
	CIO_TRACE_EVENT(2, dev_name(&sch->dev));

	if (sch_is_pseudo_sch(sch))
		return -EINVAL;
	if (cio_update_schib(sch))
		return -ENODEV;

	sch->config.ena = 1;
	sch->config.isc = sch->isc;
	sch->config.intparm = intparm;

	for (retry = 0; retry < 3; retry++) {
		ret = cio_commit_config(sch);
		if (ret == -EIO) {
			sch->config.csense = 0;
		} else if (ret == -EBUSY) {
			struct irb irb;
			if (tsch(sch->schid, &irb) != 0)
				break;
		} else
			break;
	}
	CIO_HEX_EVENT(2, &ret, sizeof(ret));
	return ret;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:31，代码来源:cio.c

示例14: cio_start_key

int
cio_start_key (struct subchannel *sch,	/* subchannel structure */
	       struct ccw1 * cpa,	/* logical channel prog addr */
	       __u8 lpm,		/* logical path mask */
	       __u8 key)                /* storage key */
{
	char dbf_txt[15];
	int ccode;
	union orb *orb;

	CIO_TRACE_EVENT(4, "stIO");
	CIO_TRACE_EVENT(4, dev_name(&sch->dev));

	orb = &to_io_private(sch)->orb;
	memset(orb, 0, sizeof(union orb));
	/* sch is always under 2G. */
	orb->cmd.intparm = (u32)(addr_t)sch;
	orb->cmd.fmt = 1;

	orb->cmd.pfch = sch->options.prefetch == 0;
	orb->cmd.spnd = sch->options.suspend;
	orb->cmd.ssic = sch->options.suspend && sch->options.inter;
	orb->cmd.lpm = (lpm != 0) ? lpm : sch->lpm;
#ifdef CONFIG_64BIT
	/*
	 * for 64 bit we always support 64 bit IDAWs with 4k page size only
	 */
	orb->cmd.c64 = 1;
	orb->cmd.i2k = 0;
#endif
	orb->cmd.key = key >> 4;
	/* issue "Start Subchannel" */
	orb->cmd.cpa = (__u32) __pa(cpa);
	ccode = ssch(sch->schid, orb);

	/* process condition code */
	sprintf(dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT(4, dbf_txt);

	switch (ccode) {
	case 0:
		/*
		 * initialize device status information
		 */
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_START_PEND;
		return 0;
	case 1:		/* status pending */
	case 2:		/* busy */
		return -EBUSY;
	case 3:		/* device/path not operational */
		return cio_start_handle_notoper(sch, lpm);
	default:
		return ccode;
	}
}

开发者ID:kizukukoto，项目名称:WDN900_GPL，代码行数:55，代码来源:cio.c

示例15: cio_start_key

int
cio_start_key (struct subchannel *sch,	/* subchannel structure */
	       struct ccw1 * cpa,	/* logical channel prog addr */
	       __u8 lpm,		/* logical path mask */
	       __u8 key)                /* storage key */
{
	char dbf_txt[15];
	int ccode;

	CIO_TRACE_EVENT (4, "stIO");
	CIO_TRACE_EVENT (4, sch->dev.bus_id);

	/* sch is always under 2G. */
	sch->orb.intparm = (__u32)(unsigned long)sch;
	sch->orb.fmt = 1;

	sch->orb.pfch = sch->options.prefetch == 0;
	sch->orb.spnd = sch->options.suspend;
	sch->orb.ssic = sch->options.suspend && sch->options.inter;
	sch->orb.lpm = (lpm != 0) ? (lpm & sch->opm) : sch->lpm;
#ifdef CONFIG_ARCH_S390X
	/*
	 * for 64 bit we always support 64 bit IDAWs with 4k page size only
	 */
	sch->orb.c64 = 1;
	sch->orb.i2k = 0;
#endif
	sch->orb.key = key >> 4;
	/* issue "Start Subchannel" */
	sch->orb.cpa = (__u32) __pa (cpa);
	ccode = ssch (sch->irq, &sch->orb);

	/* process condition code */
	sprintf (dbf_txt, "ccode:%d", ccode);
	CIO_TRACE_EVENT (4, dbf_txt);

	switch (ccode) {
	case 0:
		/*
		 * initialize device status information
		 */
		sch->schib.scsw.actl |= SCSW_ACTL_START_PEND;
		return 0;
	case 1:		/* status pending */
	case 2:		/* busy */
		return -EBUSY;
	default:		/* device/path not operational */
		return cio_start_handle_notoper(sch, lpm);
	}
}

开发者ID:Dronevery，项目名称:JetsonTK1-kernel，代码行数:50，代码来源:cio.c

示例16: ERR_PTR

/**
 * s390_register_adapter_interrupt() - register adapter interrupt handler
 * @handler: adapter handler to be registered
 * @drv_data: driver data passed with each call to the handler
 * @isc: isc for which the handler should be called
 *
 * Returns:
 *  Pointer to the indicator to be used on success
 *  ERR_PTR() if registration failed
 */
void *s390_register_adapter_interrupt(adapter_int_handler_t handler,
				      void *drv_data, u8 isc)
{
	struct airq_t *airq;
	char dbf_txt[16];
	int ret;

	if (isc > MAX_ISC)
		return ERR_PTR(-EINVAL);
	airq = kmalloc(sizeof(struct airq_t), GFP_KERNEL);
	if (!airq) {
		ret = -ENOMEM;
		goto out;
	}
	airq->handler = handler;
	airq->drv_data = drv_data;

	ret = register_airq(airq, isc);
out:
	snprintf(dbf_txt, sizeof(dbf_txt), "rairq:%d", ret);
	CIO_TRACE_EVENT(4, dbf_txt);
	if (ret < 0) {
		kfree(airq);
		return ERR_PTR(ret);
	} else
		return &indicators[isc].byte[ret];
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:37，代码来源:airq.c

示例17: s390_redo_validation

/*
 * Function: s390_redo_validation
 * Look for no longer blacklisted devices
 * FIXME: there must be a better way to do this */
static inline void
s390_redo_validation (void)
{
	unsigned int irq;

	CIO_TRACE_EVENT (0, "redoval");
	for (irq = 0; irq <= __MAX_SUBCHANNELS; irq++) {
		int ret;
		struct subchannel *sch;

		sch = get_subchannel_by_schid(irq);
		if (sch) {
			/* Already known. */
			put_device(&sch->dev);
			continue;
		}
		ret = css_probe_device(irq);
		if (ret == -ENXIO)
			break; /* We're through. */
		if (ret == -ENOMEM)
			/*
			 * Stop validation for now. Bad, but no need for a
			 * panic.
			 */
			break;
	}
}

开发者ID:FelipeFernandes1988，项目名称:Alice-1121-Modem，代码行数:31，代码来源:blacklist.c

示例18: s390_vary_chpid

/*
 * Function: s390_vary_chpid
 * Varies the specified chpid online or offline
 */
static int s390_vary_chpid(struct chp_id chpid, int on)
{
	char dbf_text[15];
	int status;

	sprintf(dbf_text, on?"varyon%x.%02x":"varyoff%x.%02x", chpid.cssid,
		chpid.id);
	CIO_TRACE_EVENT(2, dbf_text);

	status = chp_get_status(chpid);
	if (status < 0) {
		printk(KERN_ERR "Can't vary unknown chpid %x.%02x\n",
		       chpid.cssid, chpid.id);
		return -EINVAL;
	}

	if (!on && !status) {
		printk(KERN_ERR "chpid %x.%02x is already offline\n",
		       chpid.cssid, chpid.id);
		return -EINVAL;
	}

	set_chp_logically_online(chpid, on);
	chsc_chp_vary(chpid, on);
	return 0;
}

开发者ID:xf739645524，项目名称:kernel-rhel5，代码行数:30，代码来源:chp.c

示例19: cio_start_key

int
cio_start_key (struct subchannel *sch,	
	       struct ccw1 * cpa,	
	       __u8 lpm,		
	       __u8 key)                
{
	struct io_subchannel_private *priv = to_io_private(sch);
	union orb *orb = &priv->orb;
	int ccode;

	CIO_TRACE_EVENT(5, "stIO");
	CIO_TRACE_EVENT(5, dev_name(&sch->dev));

	memset(orb, 0, sizeof(union orb));
	
	orb->cmd.intparm = (u32)(addr_t)sch;
	orb->cmd.fmt = 1;

	orb->cmd.pfch = priv->options.prefetch == 0;
	orb->cmd.spnd = priv->options.suspend;
	orb->cmd.ssic = priv->options.suspend && priv->options.inter;
	orb->cmd.lpm = (lpm != 0) ? lpm : sch->lpm;
#ifdef CONFIG_64BIT
	orb->cmd.c64 = 1;
	orb->cmd.i2k = 0;
#endif
	orb->cmd.key = key >> 4;
	
	orb->cmd.cpa = (__u32) __pa(cpa);
	ccode = ssch(sch->schid, orb);

	
	CIO_HEX_EVENT(5, &ccode, sizeof(ccode));

	switch (ccode) {
	case 0:
		sch->schib.scsw.cmd.actl |= SCSW_ACTL_START_PEND;
		return 0;
	case 1:		
	case 2:		
		return -EBUSY;
	case 3:		
		return cio_start_handle_notoper(sch, lpm);
	default:
		return ccode;
	}
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:47，代码来源:cio.c

示例20: do_adapter_IO

void
do_adapter_IO (void)
{
	CIO_TRACE_EVENT (6, "doaio");

	if (adapter_handler)
		(*adapter_handler) ();
}

开发者ID:mahyarmd，项目名称:unifi-gpl，代码行数:8，代码来源:airq.c

注：本文中的CIO_TRACE_EVENT函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ CIRC_CNT_TO_END函数代码示例发布时间：2022-05-30

C++ CIO_HEX_EVENT函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：17234|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9319|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：7942|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8307|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8212|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9053|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8187|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7602|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8142|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7185|2022-11-06

客服电话

电子邮件

C++ CIO_TRACE_EVENT函数代码示例

示例1: cio_cancel

示例2: cio_disable_subchannel

示例3: cio_halt

示例4: cio_resume

示例5: cio_enable_subchannel

示例6: cio_halt

示例7: cio_clear

示例8: cio_cancel

示例9: cio_halt

示例10: cio_resume

示例11: cio_cancel

示例12: cio_clear

示例13: cio_enable_subchannel

示例14: cio_start_key

示例15: cio_start_key

示例16: ERR_PTR

示例17: s390_redo_validation

示例18: s390_vary_chpid

示例19: cio_start_key

示例20: do_adapter_IO

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

DelphiFMX如何改变TButton,TSpeedButton中

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053