• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ CHK函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中CHK函数的典型用法代码示例。如果您正苦于以下问题:C++ CHK函数的具体用法?C++ CHK怎么用?C++ CHK使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了CHK函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gread

void
gread(struct termios *tp, char *s)
{
	const struct cchar *cp;
	char *ep, *p;
	long tmp;

	if ((s = strchr(s, ':')) == NULL)
		gerr(NULL);
	for (++s; s != NULL;) {
		p = strsep(&s, ":\0");
		if (!p || !*p)
			break;
		if (!(ep = strchr(p, '=')))
			gerr(p);
		*ep++ = '\0';
		(void)sscanf(ep, "%lx", &tmp);

#define	CHK(s)	(*p == s[0] && !strcmp(p, s))
		if (CHK("cflag")) {
			tp->c_cflag = tmp;
			continue;
		}
		if (CHK("iflag")) {
			tp->c_iflag = tmp;
			continue;
		}
		if (CHK("ispeed")) {
			(void)sscanf(ep, "%ld", &tmp);
			tp->c_ispeed = tmp;
			continue;
		}
		if (CHK("lflag")) {
			tp->c_lflag = tmp;
			continue;
		}
		if (CHK("oflag")) {
			tp->c_oflag = tmp;
			continue;
		}
		if (CHK("ospeed")) {
			(void)sscanf(ep, "%ld", &tmp);
			tp->c_ospeed = tmp;
			continue;
		}
		for (cp = cchars1; cp->name != NULL; ++cp)
			if (CHK(cp->name)) {
				tp->c_cc[cp->sub] = tmp;
				break;
			}
		if (cp->name == NULL)
			gerr(p);
	}
}
开发者ID:Bluerise,项目名称:openbsd-src,代码行数:54,代码来源:gfmt.c


示例2: BMessageRunner

/*
	BMessageRunner(BMessenger target, const BMessage *message,
				   bigtime_t interval, int32 count)
	@case 3			target is valid, message is valid, interval == 0, count > 0
	@results		R5: InitCheck() should return B_ERROR.
						GetInfo() should return B_BAD_VALUE.
					OBOS: InitCheck() should return B_OK.
						  GetInfo() should return B_OK.
						  A minimal time interval is used (50000).
 */
void TBMessageRunnerTester::BMessageRunnerA3()
{
	MessageRunnerTestApp app(kTesterSignature);
	MessageRunnerTestLooper *looper = app.TestLooper();
	BMessenger target(looper);
	BMessage message(MSG_RUNNER_MESSAGE);
	bigtime_t interval = 0;
	int32 count = 5;
	BMessageRunner runner(target, &message, interval, count);
#ifdef TEST_R5
	CHK(runner.InitCheck() == B_ERROR);
	check_message_runner_info(runner, B_BAD_VALUE);
#else
	bigtime_t startTime = system_time();
	CHK(runner.InitCheck() == B_OK);
	interval = max(interval, kMinTimeInterval);
	check_message_runner_info(runner, B_OK, interval, count);
	snooze((count + 1) * interval + 10000);
	CHK(looper->CheckMessages(startTime, interval, count));
	CHK(app.CountReplies() == count);
#endif
}
开发者ID:mariuz,项目名称:haiku,代码行数:32,代码来源:BMessageRunnerTester.cpp


示例3: channelTestFamily_done

utilStatus channelTestFamily_done( channelTestFamily * This ) {
   utilStatus status = UTIL_STATUS_NO_ERROR;
   if( This ) {
      unsigned i;
      if( This->parent2 ) {
         CHK(__FILE__,__LINE__,channelTestPerson_delete( &This->parent2 ))
      }
      for( i = 0; i < This->children.count; ++i ) {
         CHK(__FILE__,__LINE__,channelTestPerson_delete( &This->children.items[i] ))
      }
      CHK(__FILE__,__LINE__,channelList_done((channelList *)&This->children ))
   }
   else {
开发者ID:AubinMahe,项目名称:dcrud,代码行数:13,代码来源:Family.c


示例4: cli_fault_injection_dev_addr

int cli_fault_injection_dev_addr(char *line, int num_of_args)
{
	char fault_num_str[MAX_ARG_SIZE];
	char dev_addr_str[MAX_ARG_SIZE];
	int fault_num;
	int dev_addr;

	/* Get number of fault injection */
	CHK(cli_get_word(line, fault_num_str, sizeof(fault_num_str), 2));

	/* Get device address */
	CHK(cli_get_word(line, dev_addr_str, sizeof(dev_addr_str), 3));

	/* Convert strings to int */
	fault_num = atoi(fault_num_str) - 1;
	dev_addr = (int) strtol(dev_addr_str, (char **) &dev_addr_str, 16);


	CHK(cfg_set_fault_injection_dev_address(fault_num, (unsigned char) dev_addr));

	return 0;
}
开发者ID:redivo,项目名称:tcc,代码行数:22,代码来源:cli_fault_injection.c


示例5: GetAppList

/*
	void GetAppList(const char *signature, BList *teamIDList) const
	@case 2			teamIDList is not NULL and not empty, signature is not
					NULL, but no app with this signature is running
	@results		Should not modify teamIDList.
*/
void GetAppListTester::GetAppListTestB2()
{
	const char *signature = "application/x-vnd.obos-does-not-exist";
	// create a list with some dummy entries
	BList list;
	list.AddItem((void*)-7);
	list.AddItem((void*)-42);
	// get a list of running applications for reference
	BRoster roster;
	BList list1(list);
	roster.GetAppList(signature, &list1);
	// run some apps
	AppRunner runner1(true);
	AppRunner runner2(true);
	AppRunner runner3(true);
	CHK(runner1.Run("AppRunTestApp1") == B_OK);
	CHK(runner2.Run("AppRunTestApp2") == B_OK);
	CHK(runner3.Run("BMessengerTestApp1") == B_OK);
	BList expectedApps;
	// get a new app list and check it
	BList list2(list);
	roster.GetAppList(signature, &list2);
	check_list(list2, list, list1, expectedApps);
	// quit app 1
	runner1.WaitFor(true);
	BList list3(list);
	roster.GetAppList(signature, &list3);
	check_list(list3, list, list1, expectedApps);
	// quit app 2
	runner2.WaitFor(true);
	BList list4(list);
	roster.GetAppList(signature, &list4);
	check_list(list4, list, list1, expectedApps);
	// quit app 3
	runner3.WaitFor(true);
	BList list5(list);
	roster.GetAppList(signature, &list5);
	check_list(list5, list, list1, expectedApps);
}
开发者ID:SummerSnail2014,项目名称:haiku,代码行数:45,代码来源:GetAppListTester.cpp


示例6: IteratorForIndex

	inline ConstIterator IteratorForIndex(int32 index) const
	{
		if (index < 0 || index > Count()) {
			CHK(fMyVector.IteratorForIndex(index) == fMyVector.End());
			return End();
		} else {
			MyIterator myIt = fMyVector.IteratorForIndex(index);
			ReferenceIterator it = fReferenceVector.begin();
			for (int32 i = 0; i < index; i++)
				++it;
			return ConstIterator(this, myIt, it);
		}
	}
开发者ID:SummerSnail2014,项目名称:haiku,代码行数:13,代码来源:VectorTest.cpp


示例7: TestDir15

uint TestDir15(void)
{
  tIORes res;
  uint result = 1;
  tReadDirState ReadDirState;
  tFATDirectoryEntry DirEntry;
//  tFATFSStatus FSStatus2;

  FAT_opendir (&stdio_FATFS, &res, "d:\\", &ReadDirState);
  CHK(res == ior_OK);

  FAT_readdir (&stdio_FATFS, &res, &ReadDirState, &DirEntry);
  CHK(res == ior_NO_MORE_FILES);

  FAT_closedir (&stdio_FATFS, &res, &ReadDirState);
  CHK(res == ior_OK);

  result = 0;

lend:
  return result;
}
开发者ID:vn2019,项目名称:epos,代码行数:22,代码来源:testcase.c


示例8: main

int main(int argc, char **argv)
{
	/* create dummy pixmap to get initialization out of the way */
	c2d_ts_handle curTimestamp;
	PixmapPtr tmp = create_pixmap(64, 64, xRGB);
	CHK(c2dFlush(tmp->id, &curTimestamp));
	CHK(c2dWaitTimestamp(curTimestamp));

/*
[  1340.257] (II) freedreno(0): MSMCheckComposite:590 op:12: 0x2eb268 {20028888, 0} <- 0x2eb3a8 {08018000, 0} ((nil) {00000000, 0})
[  1340.257] (II) freedreno(0): MSMPrepareComposite:694 0x2eb178 {35x8,256} <- 0x2eb2c8 {1024x320,1024} ((nil) {0x0,0})
[  1340.258] (II) freedreno(0): MSMComposite:766 srcX=0 srcY=0  maskX=0 maskY=0 dstX=0  dstY=2  width=7 height=6
 */

	test_composite(C2D_ALPHA_BLEND_ADDITIVE,
			ARGB, 35,   8,
			A8,   1024, 320,
			0,    0,    0,
			0, 0, 0, 0, 0, 2, 7, 6);

	return 0;
}
开发者ID:downthemachine,项目名称:freedreno,代码行数:22,代码来源:test-composite2.c


示例9: ctr_drbg_self_test

/*
 * Checkup routine
 */
int ctr_drbg_self_test( int verbose )
{
    ctr_drbg_context ctx;
    unsigned char buf[16];

    /*
     * Based on a NIST CTR_DRBG test vector (PR = True)
     */
    if( verbose != 0 )
        polarssl_printf( "  CTR_DRBG (PR = TRUE) : " );

    test_offset = 0;
    CHK( ctr_drbg_init_entropy_len( &ctx, ctr_drbg_self_test_entropy,
                                entropy_source_pr, nonce_pers_pr, 16, 32 ) );
    ctr_drbg_set_prediction_resistance( &ctx, CTR_DRBG_PR_ON );
    CHK( ctr_drbg_random( &ctx, buf, CTR_DRBG_BLOCKSIZE ) );
    CHK( ctr_drbg_random( &ctx, buf, CTR_DRBG_BLOCKSIZE ) );
    CHK( memcmp( buf, result_pr, CTR_DRBG_BLOCKSIZE ) );

    if( verbose != 0 )
        polarssl_printf( "passed\n" );

    /*
     * Based on a NIST CTR_DRBG test vector (PR = FALSE)
     */
    if( verbose != 0 )
        polarssl_printf( "  CTR_DRBG (PR = FALSE): " );

    test_offset = 0;
    CHK( ctr_drbg_init_entropy_len( &ctx, ctr_drbg_self_test_entropy,
                            entropy_source_nopr, nonce_pers_nopr, 16, 32 ) );
    CHK( ctr_drbg_random( &ctx, buf, 16 ) );
    CHK( ctr_drbg_reseed( &ctx, NULL, 0 ) );
    CHK( ctr_drbg_random( &ctx, buf, 16 ) );
    CHK( memcmp( buf, result_nopr, 16 ) );

    if( verbose != 0 )
        polarssl_printf( "passed\n" );

    if( verbose != 0 )
            polarssl_printf( "\n" );

    return( 0 );
}
开发者ID:cwyiu,项目名称:fibjs,代码行数:47,代码来源:ctr_drbg.c


示例10: chunk_write

/* writting from chunk */
int chunk_write(void *chunk, int fd)
{
    int n = -1;

    if(chunk && fd > 0 && CHK(chunk)->left > 0 && CHK(chunk)->data && CHK(chunk)->end
            && (n = write(fd, CHK(chunk)->end, CHK(chunk)->left)) > 0)
    {
        CHK(chunk)->left -= n;
        CHK(chunk)->end += n;
    }
    return n;
}
开发者ID:houweifeng,项目名称:sbase,代码行数:13,代码来源:chunk.c


示例11: calc_afe_blacklevel

/*
 * Calculate and set the AFE offset.
 *
 * low:  known-good AFE offset-register value. See note.
 * high: known-good AFE offset-register value. See note. 
 *
 * Note:
 * 'low' and 'high' depend on the scanner model.
 * Choose them so that
 * 1. both produce black pixel samples > 0, and never zero.
 * 2. 'low' produces a a darker black level than 'high',
 * 3. 'low' and 'high' values are as far apart as possible,
 *    for better precision.
 * Example: For CanoScan 4400F, select low = 75, high = 0.
 * Notice that the 'low' register value is not necessarily
 * less than the 'high' register value. It is what comes
 * out of the scanner that counts.
 */
static int calc_afe_blacklevel(struct gl843_device *dev,
			       struct calibration_info *cal,
			       uint8_t low, uint8_t high)
{
	int ret, i;
	struct gl843_image *img;
	struct img_stat lo_stat, hi_stat;

	DBG(DBG_msg, "Calibrating A/D-converter black level.\n");

	CHK_MEM(img = create_image(cal->width, cal->height, PXFMT_RGB16));

	/* Scan with the lamp off to produce black pixels. */
	CHK(set_lamp(dev, LAMP_OFF, 0));

	/* Sample 'low' black level */

	for (i = 0; i < 3; i++) {
		CHK(write_afe_gain(dev, i, 1.0));
		CHK(write_afe(dev, 32 + i, low));  /* Set 'low' black level */
	}
	CHK(scan_img(dev, img, 10000));
	get_image_stats(img, &lo_stat);

	/* Sample 'high' black level */

	for (i = 0; i < 3; i++) {
		CHK(write_afe(dev, 32 + i, high)); /* Set 'high' black level */
	}
	CHK(scan_img(dev, img, 10000));
	get_image_stats(img, &hi_stat);

	/* Use the line equation to find and set the best offset value */

	for (i = 0; i < 3; i++) {
		double m, c; /* y = mx + c */
		int o;	/* offset */
		m = (hi_stat.avg[i] - lo_stat.avg[i]) / (high - low);
		c = lo_stat.avg[i] - m * low;
		o = (int) satf(-c / m + 0.5, 0, 255);
		cal->offset[i] = o;
		CHK(write_afe(dev, 32 + i, o));
		DBG(DBG_info, "AFE %s offset = %d\n", idx_name(i), o);
	}

	ret = 0;
chk_failed:
	free(img);
	return ret;	
chk_mem_failed:
	ret = LIBUSB_ERROR_NO_MEM;
	goto chk_failed;
}
开发者ID:AndreySV,项目名称:gl843driver,代码行数:71,代码来源:scan.c


示例12: msearch

int
msearch(char ***argvp, struct info *ip)
{
	struct modes *mp;
	char *name;

	name = **argvp;

	for (mp = cmodes; mp->name; ++mp)
		if (CHK(mp->name)) {
			ip->t.c_cflag &= ~mp->unset;
			ip->t.c_cflag |= mp->set;
			ip->set = 1;
			return (1);
		}
	for (mp = imodes; mp->name; ++mp)
		if (CHK(mp->name)) {
			ip->t.c_iflag &= ~mp->unset;
			ip->t.c_iflag |= mp->set;
			ip->set = 1;
			return (1);
		}
	for (mp = lmodes; mp->name; ++mp)
		if (CHK(mp->name)) {
			ip->t.c_lflag &= ~mp->unset;
			ip->t.c_lflag |= mp->set;
			ip->set = 1;
			return (1);
		}
	for (mp = omodes; mp->name; ++mp)
		if (CHK(mp->name)) {
			ip->t.c_oflag &= ~mp->unset;
			ip->t.c_oflag |= mp->set;
			ip->set = 1;
			return (1);
		}
	return (0);
}
开发者ID:daniloegea,项目名称:freebsd,代码行数:38,代码来源:modes.c


示例13: main

int main(int argc, char **argv)
{
	/* create dummy pixmap to get initialization out of the way */
	c2d_ts_handle curTimestamp;
	PixmapPtr tmp = create_pixmap(64, 64, xRGB);
	CHK(c2dFlush(tmp->id, &curTimestamp));
	CHK(c2dWaitTimestamp(curTimestamp));

	test_fill(1920, 1080, xRGB, 0, 0, 1920, 1080);
	test_fill(1920, 1080, xRGB, 717, 395, 718, 685);

	/* test limits of x, y */
	test_fill(1920, 1080, xRGB, 0x100, 0, 0x101, 0);
	test_fill(1920, 1080, xRGB, 0, 0x100, 0, 0x101);

	/* test limits of width, height */
	test_fill(1920, 1080, xRGB, 0, 0, 0x100, 0);
	test_fill(1920, 1080, xRGB, 0, 0, 0, 0x100);

	test_fill(1, 1, xRGB, 0, 0, 1, 1);

	return 0;
}
开发者ID:maclaw,项目名称:freedreno,代码行数:23,代码来源:test-fill2.c


示例14: cli_fault_injection_gen_read_en

int cli_fault_injection_gen_read_en(char *line, int num_of_args)
{
	char fault_num_str[MAX_ARG_SIZE];
	char en_value_str[MAX_ARG_SIZE];
	int fault_num;
	int en_value;

	/* Get number of fault injection */
	CHK(cli_get_word(line, fault_num_str, sizeof(fault_num_str), 2));

	/* Get enable value */
	CHK(cli_get_word(line, en_value_str, sizeof(en_value_str), 3));

	/* Convert strings to int */
	fault_num = atoi(fault_num_str) - 1;
	en_value = atoi(en_value_str);

	CHK(cfg_set_fault_injection_read_enable(fault_num, en_value));

	return 0;

	return 0;
}
开发者ID:redivo,项目名称:tcc,代码行数:23,代码来源:cli_fault_injection.c


示例15: TestDir13

uint TestDir13(void)
{
  tIORes res;
  uint result = 1;
//  tFATFSStatus FSStatus1;

  FAT_mkdir (&stdio_FATFS, &res, "d:\\level1", mt_S_IWUSR);
  CHK(res == ior_OK);

  result = 0;

lend:
  return result;
}
开发者ID:vn2019,项目名称:epos,代码行数:14,代码来源:testcase.c


示例16: cfg_set_fault_injection_dev_address

int cfg_set_fault_injection_dev_address(int index, unsigned char address)
{
	if (!IS_VALID_FAULT_INJECTION_INDEX(index))
		return ERR_INVALID_PARAM;

	if (!IS_VALID_DEV_ADDR(address))
		return ERR_INVALID_PARAM;

	CHK(hw_set_i2c_address(FI_INDEX_TO_I2C_NUMBER(index), address));

	Cfg.i2c_fi[index].dev_address = address;

	return 0;
}
开发者ID:redivo,项目名称:tcc,代码行数:14,代码来源:cfg_i2c.c


示例17: IntArrayListImport

ESR_ReturnCode IntArrayListImport(int* value, IntArrayList** self)
{
  ESR_ReturnCode rc;
  IntArrayListImpl* impl;
  
  if (self == NULL)
    return ESR_INVALID_ARGUMENT;
  CHK(rc, IntArrayListCreate(self));
  impl = (IntArrayListImpl*) self;
  impl->contents = value;
  return ESR_SUCCESS;
CLEANUP:
  return rc;
}
开发者ID:0omega,项目名称:platform_external_srec,代码行数:14,代码来源:IntArrayListImpl.c


示例18: check_list

// check_list
static
void
check_list(const BList &toCheck, const BList &base, const BList &extendedBase,
		   const BList &expected)
{
	// toCheck and extendedBase must have prefix base
	int32 baseCount = base.CountItems();
	for (int32 i = 0; i < baseCount; i++) {
		CHK(base.ItemAt(i) == toCheck.ItemAt(i));
		CHK(base.ItemAt(i) == extendedBase.ItemAt(i));
	}
	// toCheck must have correct size
	int32 toCheckCount = toCheck.CountItems();
	int32 extendedBaseCount = extendedBase.CountItems();
	int32 expectedCount = expected.CountItems();
	CHK(toCheckCount == extendedBaseCount + expectedCount);
	// toCheck must contain all elements of extendedBase and expected
	// (arbitrary order)
	BList list(extendedBase);
	list.AddList((BList*)&expected);
	CHK(contains_list(toCheck, list));
	CHK(contains_list(list, toCheck));
}
开发者ID:SummerSnail2014,项目名称:haiku,代码行数:24,代码来源:GetAppListTester.cpp


示例19: SR_EventLog_TokenSize_t

ESR_ReturnCode SR_EventLog_TokenSize_t(SR_EventLog* self, const LCHAR* token, size_t value)
{
  SR_EventLogImpl *impl = (SR_EventLogImpl *)self;
  ESR_ReturnCode rc;
  LCHAR alpha[MAX_UINT_DIGITS+1];
  size_t size = MAX_INT_DIGITS+1;

  if (impl->logLevel == 0)
    return ESR_SUCCESS;
  CHK(rc, lultostr(value, alpha, &size, 10));
  return self->token(self, token, alpha);
CLEANUP:
  return rc;
}
开发者ID:CriGio,项目名称:platform_external_srec,代码行数:14,代码来源:EventLogImpl.c


示例20: open_socket

static void open_socket (int port)
{
	struct sockaddr_in my_addr;
	int sock = socket(AF_INET, SOCK_STREAM, 0);
	CHK(sock);
	my_addr.sin_addr.s_addr = htonl(INADDR_ANY);
	my_addr.sin_port = htons(port);
	my_addr.sin_family = AF_INET;
	int optval = 1;
	CHK(setsockopt(sock, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof optval));

	CHK(bind(sock,(struct sockaddr *)&my_addr,sizeof(struct sockaddr_in)));
	CHK(listen(sock,1));
	sockfd = accept(sock,&bot_addr, &bot_addrlen);
	CHK(sockfd);
	close(sock);
	char msg[MAX_MSG_SIZE] ;
	recv(sockfd,msg,MAX_MSG_SIZE,0);
	int wlen = 4;
	if (strncmp(msg, "NAME", wlen) == 0) {
	  mm_botname(msg + wlen + 1,word_len(msg+wlen+1));	
	}
}
开发者ID:lleclech,项目名称:PFA-Nethack-teamB,代码行数:23,代码来源:bot_handler.c



注:本文中的CHK函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ CHKERR函数代码示例发布时间:2022-05-30
下一篇:
C++ CHIP_Init函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap