C++ BSP_LCD_GetXSize函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BSP_LCD_GetXSize函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_LCD_GetXSize函数的具体用法？C++ BSP_LCD_GetXSize怎么用？C++ BSP_LCD_GetXSize使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BSP_LCD_GetXSize函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: BSP_LCD_Init

/**
  * @brief  Initializes the LCD.
  * @retval LCD state
  */
uint8_t BSP_LCD_Init(void)
{
    /* Timing Configuration */
    ltdc_handle.Init.HorizontalSync = (RK043FN48H_HSYNC - 1);
    ltdc_handle.Init.VerticalSync = (RK043FN48H_VSYNC - 1);
    ltdc_handle.Init.AccumulatedHBP = (RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
    ltdc_handle.Init.AccumulatedVBP = (RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
    ltdc_handle.Init.AccumulatedActiveH = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP - 1);
    ltdc_handle.Init.AccumulatedActiveW = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP - 1);
    ltdc_handle.Init.TotalHeigh = (RK043FN48H_HEIGHT + RK043FN48H_VSYNC + RK043FN48H_VBP + RK043FN48H_VFP - 1);
    ltdc_handle.Init.TotalWidth = (RK043FN48H_WIDTH + RK043FN48H_HSYNC + RK043FN48H_HBP + RK043FN48H_HFP - 1);

    /* LCD clock configuration */
    BSP_LCD_ClockConfig(&ltdc_handle, NULL);

    /* Initialize the LCD pixel width and pixel height */
    ltdc_handle.LayerCfg->ImageWidth  = RK043FN48H_WIDTH;
    ltdc_handle.LayerCfg->ImageHeight = RK043FN48H_HEIGHT;

    /* Background value */
    ltdc_handle.Init.Backcolor.Blue = 0;
    ltdc_handle.Init.Backcolor.Green = 0;
    ltdc_handle.Init.Backcolor.Red = 0;

    /* Polarity */
    ltdc_handle.Init.HSPolarity = LTDC_HSPOLARITY_AL;
    ltdc_handle.Init.VSPolarity = LTDC_VSPOLARITY_AL;
    ltdc_handle.Init.DEPolarity = LTDC_DEPOLARITY_AL;
    ltdc_handle.Init.PCPolarity = LTDC_PCPOLARITY_IPC;
    ltdc_handle.Instance = LTDC;

    if (HAL_LTDC_GetState(&ltdc_handle) == HAL_LTDC_STATE_RESET) {
        BSP_LCD_MspInit(&ltdc_handle, NULL);
    }

    HAL_LTDC_Init(&ltdc_handle);

    /* allocate the framebuffer */
    size_t fb_size_pages = PAGE_ALIGN(RK043FN48H_WIDTH * RK043FN48H_HEIGHT * 4) / PAGE_SIZE;
    void *fb_address = novm_alloc_pages(fb_size_pages, NOVM_ARENA_SECONDARY);
    if (!fb_address)
        panic("failed to allocate framebuffer for LCD\n");

    BSP_LCD_LayerDefaultInit(0, (uint32_t)fb_address);
    BSP_LCD_SelectLayer(0);

    /* clear framebuffer */
    memset((void *)ltdc_handle.LayerCfg[active_layer].FBStartAdress, 0,
           BSP_LCD_GetXSize() * BSP_LCD_GetYSize() * BSP_LCD_PixelSize());

    /* turn the display on */
    BSP_LCD_DisplayOn();
    return LCD_OK;
}

开发者ID:david-dee，项目名称:lk，代码行数:58，代码来源:lcd.c

示例2: BSP_LCD_DrawRGBImage

/**
  * @brief  Draws RGB Image (16 bpp).
  * @param  Xpos:  X position in the LCD
  * @param  Ypos:  Y position in the LCD
  * @param  Xsize: X size in the LCD
  * @param  Ysize: Y size in the LCD
  * @param  pdata: Pointer to the RGB Image address.
  * @retval None
  */
void BSP_LCD_DrawRGBImage(uint16_t Xpos, uint16_t Ypos, uint16_t Xsize, uint16_t Ysize, uint8_t *pdata)
{
  
  SetDisplayWindow(Xpos, Ypos, Xsize, Ysize);
  
  if(LcdDrv->DrawRGBImage != NULL)
  {
    LcdDrv->DrawRGBImage(Xpos, Ypos, Xsize, Ysize, pdata);
  } 
  SetDisplayWindow(0, 0, BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:20，代码来源:stm32446e_eval_lcd.c

示例3: TSENSOR_demo

/**
  * @brief  EEPROM Demo
  * @param  None
  * @retval None
  */
void TSENSOR_demo (void)
{ 
  uint16_t TempValue = 0;
  uint8_t  TsensorReady = 0;
  uint8_t  RequestSample = 0;
  uint32_t Tick = 0;

  TSENSOR_SetHint();

  /* Initialize the I2C TSENSOR driver ----------------------------------------*/
  BSP_LCD_SetBackColor(LCD_COLOR_WHITE);  
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);    
  BSP_LCD_FillRect(12, 92, BSP_LCD_GetXSize() - 24, BSP_LCD_GetYSize()- 104);
  BSP_LCD_SetTextColor(LCD_COLOR_BLACK);

  if (BSP_TSENSOR_Init() != TSENSOR_OK)
  {
    BSP_LCD_SetTextColor(LCD_COLOR_RED);    
    BSP_LCD_DisplayStringAt(0, 115, (uint8_t*)"Initialization problem", CENTER_MODE); 
    BSP_LCD_DisplayStringAt(0, 130, (uint8_t*)"Temperature Sensor not detected", CENTER_MODE); 
  }
  else
  {
    TsensorReady = READY;
    RequestSample = SET;
  }

  while (1)
  {
    if((TsensorReady == READY) && (RequestSample == SET))
    {
      TempValue = BSP_TSENSOR_ReadTemp();
      TSENSOR_Display_Temperature(TempValue);
      Tick = HAL_GetTick();
      RequestSample = RESET;
    }
    else
    {
      /* Request a Temperature sampling each 1s <-> 1000 ms */
      if(HAL_GetTick() >= Tick + 1000)
      {
        RequestSample = SET;
      }
    }
    
    
    if(CheckForUserInput() > 0)
    {
      return;
    }
    HAL_Delay(5);
  }
}

开发者ID:GreyCardinalRus，项目名称:stm32-cube，代码行数:58，代码来源:temperature_sensor.c

示例4: BSP_LCD_ClearStringLine

/**
  * @brief  Clears the selected line.
  * @param  Line: Line to be cleared
  *          This parameter can be one of the following values:
  *            @arg  0..9: if the Current fonts is Font16x24
  *            @arg  0..19: if the Current fonts is Font12x12 or Font8x12
  *            @arg  0..29: if the Current fonts is Font8x8
  * @retval None
  */
void BSP_LCD_ClearStringLine(uint16_t Line)
{ 
  uint32_t color_backup = DrawProp.TextColor; 

  DrawProp.TextColor = DrawProp.BackColor;;
    
  /* Draw a rectangle with background color */
  BSP_LCD_FillRect(0, (Line * DrawProp.pFont->Height), BSP_LCD_GetXSize(), DrawProp.pFont->Height);
  
  DrawProp.TextColor = color_backup;
  BSP_LCD_SetTextColor(DrawProp.TextColor);
}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:21，代码来源:stm32446e_eval_lcd.c

示例5: TSENSOR_SetHint

/**
  * @brief  Display TSENSOR Demo Hint
  * @param  None
  * @retval None
  */
static void TSENSOR_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"TEMPERATURE SENSOR", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"This example shows how to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"read a Temperature", CENTER_MODE); 

   /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
 }

开发者ID:eleciawhite，项目名称:STM32Cube，代码行数:26，代码来源:temperature_sensor.c

示例6: EEPROM_SetHint

/**
  * @brief  Display EEPROM Demo Hint
  * @param  None
  * @retval None
  */
static void EEPROM_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"EEPROM", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"This example shows the different", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"EEPROM Features, use TAMPER button", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)"to start EEPROM data transfer", CENTER_MODE); 

   /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
 }

开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:27，代码来源:eeprom.c

示例7: BSP_LCD_Clear

/**
  * @brief  Clears the hole LCD.
  * @param  Color: Color of the background
  * @retval None
  */
void BSP_LCD_Clear(uint16_t Color)
{ 
  uint32_t counter = 0;
  uint32_t color_backup = DrawProp.TextColor; 
  DrawProp.TextColor = Color;
  
  for(counter = 0; counter < BSP_LCD_GetYSize(); counter++)
  {
    BSP_LCD_DrawHLine(0, counter, BSP_LCD_GetXSize());
  }
  DrawProp.TextColor = color_backup; 
  BSP_LCD_SetTextColor(DrawProp.TextColor);
}

开发者ID:PaulingZhou，项目名称:RM2016_0X3_SystemBoard，代码行数:18，代码来源:stm324xg_eval_lcd.c

示例8: LCD_SetHint

/**
  * @brief  Display LCD demo hint
  * @param  None
  * @retval None
  */
static void LCD_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"LCD", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows the different", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"LCD Features, use BUTTON to display", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"next page", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 102);
}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:27，代码来源:lcd.c

示例9: Touchscreen_SetHint

/**
  * @brief  Display TS Demo Hint
  * @param  None
  * @retval None
  */
static void Touchscreen_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Touchscreen Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"Touchscreen", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the Touchscreen to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"activate the colored circle", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"inside the rectangle", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
}

开发者ID:eemei，项目名称:library-stm32f4，代码行数:27，代码来源:touchscreen.c

示例10: MEMS_SetHint

/**
  * @brief  Display MEMS demo hint
  * @param  None
  * @retval None
  */
static void MEMS_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"MEMS", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"This example shows MEMS Features", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"move board around axis", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)"to start test", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
}

开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:27，代码来源:mems.c

示例11: LCD_Show_FeatureBasicBitmap

/**
  * @brief  LCD demo Basic Bitmap
  * @param  None
  * @retval None
  */
static void LCD_Show_FeatureBasicBitmap(void)
{
  /* Draw several Bitmaps 'stlogo' inside rectangle area */
  BSP_LCD_SetTextColor(LCD_COLOR_BLACK);
  BSP_LCD_DrawBitmap(20, 100, (uint8_t *)stlogo);
  HAL_Delay(50);

  BSP_LCD_DrawBitmap(BSP_LCD_GetXSize() / 2 - 40, 100, (uint8_t *)stlogo);
  HAL_Delay(50);

  BSP_LCD_DrawBitmap(BSP_LCD_GetXSize() - 100, 100, (uint8_t *)stlogo);
  HAL_Delay(50);

  BSP_LCD_DrawBitmap(20, BSP_LCD_GetYSize() - 80, (uint8_t *)stlogo);
  HAL_Delay(50);

  BSP_LCD_DrawBitmap(BSP_LCD_GetXSize() / 2 - 40, BSP_LCD_GetYSize() - 80, (uint8_t *)stlogo);
  HAL_Delay(50);

  BSP_LCD_DrawBitmap(BSP_LCD_GetXSize() - 100, BSP_LCD_GetYSize() - 80, (uint8_t *)stlogo);
  HAL_Delay(50);
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:27，代码来源:lcd.c

示例12: LCD_SetInitialHint

/**
  * @brief  Display LCD demo initial hint
  * @param  None
  * @retval None
  */
static void LCD_SetInitialHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"LCD Demo", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"This example shows the different", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"LCD Features, press TAMPER button", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"to switch to next test", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 102);
}

开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:27，代码来源:lcd.c

示例13: HYGROMETER_SetHint

/**
  * @brief  Display Hygrometer Example Hint
  * @param  None
  * @retval None
  */
static void HYGROMETER_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_DARKBLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t*)"HYGROMETER EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t*)"This example shows how to make", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t*)"a hygrometer using", CENTER_MODE); 
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t*)"the capacitive humidity sensor HS1101", CENTER_MODE); 

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize()- 20, BSP_LCD_GetYSize() - 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize()- 22, BSP_LCD_GetYSize() - 102);
 }

开发者ID:eleciawhite，项目名称:STM32Cube，代码行数:27，代码来源:main.c

示例14: Joystick_SetHint

/**
  * @brief  Display joystick demo hint
  * @param  None
  * @retval None
  */
static void Joystick_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Joystick Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"Joystick", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Please use the joystick to", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"move the pointer inside the", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"rectangle", CENTER_MODE);
  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 90, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 100);
  BSP_LCD_DrawRect(11, 91, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 102);
}

开发者ID:z80，项目名称:stm32f429，代码行数:27，代码来源:joystick.c

示例15: Joystick_SetHint

/**
  * @brief  Display joystick demo hint
  * @param  None
  * @retval None
  */
static void Joystick_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set Joystick Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 40);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font24);

  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 10, (uint8_t *)"Joystick Demo", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 25, (uint8_t *)"Move the pointer", CENTER_MODE);

  
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(10, 50, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize()- 60);
  BSP_LCD_DrawRect(11, 51, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize()- 62);
}

开发者ID:PaxInstruments，项目名称:STM32CubeF2，代码行数:27，代码来源:joystick.c

示例16: Camera_LineEventCallbackNoRotation

/**
  * @brief  Camera line event callback when no camera image rotation is required
  * @param  None
  * @retval None
  */
static void Camera_LineEventCallbackNoRotation(void)
{
  uint32_t LcdResX = BSP_LCD_GetXSize();
  uint32_t LcdResY = BSP_LCD_GetYSize();

  if (refresh_authorized)
  {
    if ((offset_lcd == 0) && (CameraResX <= LcdResX) && (CameraResY <= LcdResY))
    {
      /* If Camera resolution is lower than LCD resolution, set display in the middle of the screen */
      offset_lcd =   ((((LcdResY - CameraResY) / 2) * LcdResX)   /* Middle of the screen on Y axis */
                      +   ((LcdResX - CameraResX) / 2))             /* Middle of the screen on X axis */
                     * sizeof(uint32_t);

      if ((CameraResY == CAMERA_QQVGA_RES_Y) || (CameraResIndex == CAMERA_R480x272))
      { /* Add offset for QQVGA */
        offset_lcd += 40 * LcdResX * sizeof(uint32_t);
      }
    }

    if (display_line_counter < CameraResY)
    {
      if (display_line_counter < LcdResY)
      {
        if (CameraResX < LcdResX)
        {
          ConvertCameraLineRgb565ToLcdLineARGB8888((uint32_t *)(CAMERA_FB_START_ADDR + offset_cam),
                                                   (uint32_t *)(LCD_FB_START_ADDRESS + offset_lcd),
                                                   CameraResX);
        }
        else
        {
          ConvertCameraLineRgb565ToLcdLineARGB8888((uint32_t *)(CAMERA_FB_START_ADDR + offset_cam),
                                                   (uint32_t *)(LCD_FB_START_ADDRESS + offset_lcd),
                                                   LcdResX);
        }

        offset_cam  = offset_cam + (CameraResX * sizeof(uint16_t));
        offset_lcd  = offset_lcd + (LcdResX * sizeof(uint32_t));
      }

      display_line_counter++;
    }
    else
    {
      offset_cam = 0;
      offset_lcd = 0;
      display_line_counter = 0;
    }
  }
}

开发者ID:z80，项目名称:stm32f429，代码行数:56，代码来源:camera.c

示例17: Audio_SetHint

/**
  * @brief  Display Audio demo hint
  * @param  None
  * @retval None
  */
static void Audio_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Audio Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"AUDIO EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Press User button for next menu", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Press Top/Bottom screen to change Volume   ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Press Left/Right screen to change Frequency", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 75, (uint8_t *)"Press 2 fingers for Pause/Resume           ", CENTER_MODE);
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);

}

开发者ID:MrZANE42，项目名称:verisure1512，代码行数:28，代码来源:audio_play.c

示例18: AudioRec_SetHint

/**
  * @brief  Display Audio Record demo hint
  * @param  None
  * @retval None
  */
static void AudioRec_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Audio Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"AUDIO RECORD EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"Press User button for next menu            ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Click on Joystick to start recording       ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Make sure jumpers are in the right state   ", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);

}

开发者ID:Lembed，项目名称:STM32CubeF4-mirrors，代码行数:28，代码来源:audio_rec.c

示例19: LCD_SetHint

/**
  * @brief  Display LCD demo hint
  * @param  None
  * @retval None
  */
static void LCD_SetHint(void)
{
  /* Clear the LCD */ 
  BSP_LCD_Clear(LCD_COLOR_WHITE);
  
  /* Set LCD Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 80);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE); 
  BSP_LCD_SetFont(&Font20);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"LCD", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);                  
  BSP_LCD_DisplayStringAt(0, 20, (uint8_t *)"This example shows", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 35, (uint8_t *)"LCD Features, use", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 50, (uint8_t *)"BUTTON to display", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 65, (uint8_t *)"next page", CENTER_MODE);
                          
  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);  
  BSP_LCD_DrawRect(1, 82, BSP_LCD_GetXSize() - 3, BSP_LCD_GetYSize()- 84);
  BSP_LCD_DrawRect(2, 83, BSP_LCD_GetXSize() - 5, BSP_LCD_GetYSize()- 86);
 }

开发者ID:shjere，项目名称:common，代码行数:28，代码来源:lcd.c

示例20: Camera_SetHint

/**
  * @brief  Display Camera demo hint
  * @param  None
  * @retval None
  */
static void Camera_SetHint(void)
{
  /* Clear the LCD */
  BSP_LCD_Clear(LCD_COLOR_WHITE);

  /* Set Camera Demo description */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_FillRect(0, 0, BSP_LCD_GetXSize(), 90);
  BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
  BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
  BSP_LCD_SetFont(&Font24);
  BSP_LCD_DisplayStringAt(0, 0, (uint8_t *)"CAMERA EXAMPLE", CENTER_MODE);
  BSP_LCD_SetFont(&Font12);
  BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"     Press 3 fingers for next resolution     ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 45, (uint8_t *)"Press Top/Bottom screen to change brightness ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 60, (uint8_t *)"Press Left/Right screen to change contrast   ", CENTER_MODE);
  BSP_LCD_DisplayStringAt(0, 75, (uint8_t *)"Press 2 fingers to change visual effect      ", CENTER_MODE);

  /* Set the LCD Text Color */
  BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
  BSP_LCD_DrawRect(10, 100, BSP_LCD_GetXSize() - 20, BSP_LCD_GetYSize() - 110);
  BSP_LCD_DrawRect(11, 101, BSP_LCD_GetXSize() - 22, BSP_LCD_GetYSize() - 112);
}

开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:28，代码来源:camera.c

注：本文中的BSP_LCD_GetXSize函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。