本文整理汇总了C++中BSP_Config函数的典型用法代码示例。如果您正苦于以下问题：C++ BSP_Config函数的具体用法？C++ BSP_Config怎么用？C++ BSP_Config使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了BSP_Config函数的12个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: StartThread
/**
* @brief Start thread
* @param argument: not used
* @retval None
*/
static void StartThread(void const * argument)
{
/* Initialize LCD and LEDs */
BSP_Config();
/* Create tcp_ip stack thread */
tcpip_init(NULL, NULL);
/* Initilaize the LwIP stack */
Netif_Config();
/* Notify user about the netwoek interface config */
User_notification(&gnetif);
/* Start SSL Server task */
osThreadDef(Server, ssl_server, osPriorityAboveNormal, 0, configMINIMAL_STACK_SIZE * 20);
osThreadCreate (osThread(Server), NULL);
#ifdef USE_DHCP
/* Start DHCPClient */
osThreadDef(DHCP, DHCP_thread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE * 2);
osThreadCreate (osThread(DHCP), &gnetif);
#endif
/* Start toogleLed4 task : Toggle LED4 every 250ms */
osThreadDef(LED4, ToggleLed4, osPriorityLow, 0, configMINIMAL_STACK_SIZE);
osThreadCreate (osThread(LED4), NULL);
for( ;; )
{
/* Delete the Start Thread */
osThreadTerminate(NULL);
}
}
开发者ID:acrepina，项目名称:STM32F7_serverWEB，代码行数:39，代码来源:main.c
示例2: main
/* Private functions ---------------------------------------------------------*/
int main(void) {
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
SystemClock_Config(); //Configure the System clock to have a frequency of 168 MHz
BSP_Config(); //Configure the BSP (Board Support Package)
lwip_init(); //Initilaize the LwIP stack
Netif_Config(); //Configurates the network interface
concentrator_init();
User_notification(&gnetif); //Notify the User about the nework interface config status
/* Compute the value of ARR regiter to generate signal frequency at 17.57 Khz */
uhTimerPeriod = (uint32_t) ((SystemCoreClock / 17570 ) - 1);
/* Compute CCR1 value to generate a duty cycle at 50% at the beggining */
aCCValue_Buffer = (uint32_t)(((uint32_t) uhADCxConvertedValuePercent * (uhTimerPeriod - 1)) / 100);
TIM_Config(); //TIM3, TIM4, TIM8 Peripheral Configuration
ADC_Config(); //Configure the ADC3 peripheral
while (1) {
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
sys_check_timeouts(); //Handle timeouts
}
}
开发者ID:mrtnzlml-archive，项目名称:Real-time-WS，代码行数:33，代码来源:main.c
示例3: main
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* STM32F0xx HAL library initialization:
- Configure the Flash prefetch
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Low Level Initialization
*/
HAL_Init();
/* Configure the system clock = 48 MHz */
SystemClock_Config();
/* Initialize LCD and LEDs */
BSP_Config();
/* Init the STemWin GUI Library */
GUI_Init();
/* Activate the use of memory device feature */
WM_SetCreateFlags(WM_CF_MEMDEV);
MainTask();
/* Infinite loop */
for(;;);
}
开发者ID:NjordCZ，项目名称:stm32cubef0，代码行数:34，代码来源:main.c
示例4: StartThread
/**
* @brief Main task
* @param pvParameters not used
* @retval None
*/
static void StartThread(void const * argument)
{
/* Initialize LCD and LEDs */
BSP_Config();
/* Create tcp_ip stack thread */
tcpip_init(NULL, NULL);
/* Initilaize the LwIP stack */
Netif_Config();
/* Initialize tcp echo server */
tcpecho_init();
/* Initialize udp echo server */
udpecho_init();
/* Notify user about the netwoek interface config */
User_notification(&gnetif);
/* Start toogleLed4 task : Toggle LED4 every 250ms */
osThreadDef(LED4, ToggleLed4, osPriorityLow, 0, configMINIMAL_STACK_SIZE);
osThreadCreate (osThread(LED4), NULL);
for( ;; )
{
/* Delete the Init Thread*/
osThreadTerminate(NULL);
}
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:35，代码来源:main.c
示例5: main
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to have a system clock = 168 Mhz */
SystemClock_Config();
/* Initialize LCD and LEDs */
BSP_Config();
/* Initialize RTC and Backup */
RTC_Init();
/* Init the STemWin GUI Library */
GUI_Init();
GUI_Initialized = 1;
/* Activate the use of memory device feature */
WM_SetCreateFlags(WM_CF_MEMDEV);
/* Do the calibration if needed */
CALIBRATION_Check();
/* Start Demo */
GUIDEMO_Main();
/* Infinite loop */
for(;;);
}
开发者ID:chsigi，项目名称:blindschleiche，代码行数:40，代码来源:main.c
示例6: main
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 168 MHz */
SystemClock_Config();
/* Configure the BSP */
BSP_Config();
/* Initialize the LwIP stack */
lwip_init();
/* Configure the Network interface */
Netif_Config();
/* Initialize the TFTP server */
tftpd_init();
/* Notify user about the network interface config */
User_notification(&gnetif);
/* Link the SD Card disk I/O driver */
FATFS_LinkDriver(&SD_Driver, SD_Path);
/* Infinite loop */
while (1)
{
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
/* Handle timeouts */
sys_check_timeouts();
#ifdef USE_DHCP
/* handle periodic timers for LwIP */
DHCP_Periodic_Handle(&gnetif);
#endif
}
}
开发者ID:Joe-Merten，项目名称:Stm32-Tools-Evaluation，代码行数:52，代码来源:main.c
示例7: main
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Enable the CPU Cache */
CPU_CACHE_Enable();
/* STM32F7xx HAL library initialization:
- Configure the Flash ART accelerator on ITCM interface
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 200 MHz */
SystemClock_Config();
/* Configure the BSP */
BSP_Config();
/* Initialize the LwIP stack */
lwip_init();
/* Configure the Network interface */
Netif_Config();
/* Http webserver Init */
httpd_init();
/* Notify user about the network interface config */
User_notification(&gnetif);
/* Infinite loop */
while (1)
{
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
/* Handle timeouts */
sys_check_timeouts();
#ifdef USE_DHCP
/* handle periodic timers for DHCP */
DHCP_Periodic_Handle(&gnetif);
#endif
}
}
开发者ID:vlsi1217，项目名称:STM32F7Cube，代码行数:52，代码来源:main.c
示例8: main
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 180 MHz */
SystemClock_Config();
/* Configure the BSP */
BSP_Config();
/* Initilaize the LwIP stack */
lwip_init();
/* Configure the Network interface */
Netif_Config();
/* tcp echo server Init */
udp_echoserver_init();
/* Notify user about the netwoek interface config */
User_notification(&gnetif);
/* Infinite loop */
while (1)
{
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
/* Handle timeouts */
sys_check_timeouts();
}
}
开发者ID:eemei，项目名称:library-stm32f4，代码行数:44，代码来源:main.c
示例9: StartThread
/**
* @brief Start Thread
* @param argument not used
* @retval None
*/
static void StartThread(void const * argument)
{
/* Initialize LCD and LEDs */
BSP_Config();
/* Create tcp_ip stack thread */
tcpip_init(NULL, NULL);
/* Initialize the LwIP stack */
Netif_Config();
/* Initialize webserver demo */
http_server_socket_init();
/* Notify user about the network interface config */
User_notification(&gnetif);
#ifdef USE_DHCP
/* Start DHCPClient */
#if defined(__GNUC__)
osThreadDef(DHCP, DHCP_thread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE * 5);
#else
osThreadDef(DHCP, DHCP_thread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE * 2);
#endif
osThreadCreate (osThread(DHCP), &gnetif);
#endif
/* Start toogleLed4 task : Toggle LED4 every 250ms */
osThreadDef(LED4, ToggleLed4, osPriorityLow, 0, configMINIMAL_STACK_SIZE);
osThreadCreate (osThread(LED4), NULL);
for( ;; )
{
/* Delete the Init Thread */
osThreadTerminate(NULL);
}
}
开发者ID:RadMie，项目名称:STM32F7DiscoveryBase，代码行数:43，代码来源:main.c
示例10: main
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure Key Button */
BSP_PB_Init(BUTTON_KEY, BUTTON_MODE_GPIO);
/* Test if Key push-button is not pressed */
if (BSP_PB_GetState(BUTTON_KEY) != 0x00)
{ /* Key push-button not pressed: jump to user application */
/* Check if valid stack address (RAM address) then jump to user application */
if (((*(__IO uint32_t*)USER_FLASH_FIRST_PAGE_ADDRESS) & 0x2FFE0000 ) == 0x20000000)
{
/* Jump to user application */
JumpAddress = *(__IO uint32_t*) (USER_FLASH_FIRST_PAGE_ADDRESS + 4);
Jump_To_Application = (pFunction) JumpAddress;
/* Initialize user application's Stack Pointer */
__set_MSP(*(__IO uint32_t*) USER_FLASH_FIRST_PAGE_ADDRESS);
Jump_To_Application();
/* do nothing */
while(1);
}
else
{/* Otherwise, do nothing */
/* LED3 (RED) ON to indicate bad software (when not valid stack address) */
BSP_LED_Init(LED3);
BSP_LED_On(LED3);
/* do nothing */
while(1);
}
}
/* Enter in IAP mode */
else
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 168 MHz */
SystemClock_Config();
/* Configure the BSP */
BSP_Config();
/* Initialize the LwIP stack */
lwip_init();
/* Configure the Network interface */
Netif_Config();
#ifdef USE_IAP_HTTP
/* Initialize the webserver module */
IAP_httpd_init();
#endif
#ifdef USE_IAP_TFTP
/* Initialize the TFTP server */
IAP_tftpd_init();
#endif
/* Notify user about the network interface config */
User_notification(&gnetif);
/* Infinite loop */
while (1)
{
/* Read a received packet from the Ethernet buffers and send it
to the lwIP for handling */
ethernetif_input(&gnetif);
/* Handle timeouts */
sys_check_timeouts();
#ifdef USE_DHCP
/* handle periodic timers for LwIP */
DHCP_Periodic_Handle(&gnetif);
#endif
}
}
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:88，代码来源:main.c
示例11: main
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 180 Mhz */
SystemClock_Config();
/* Initialize LCD and LEDs */
BSP_Config();
/***********************************************************/
/* Compute the prescaler value to have TIM3 counter clock equal to 10 KHz */
uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 10000) - 1;
/* Set TIMx instance */
TimHandle.Instance = TIM3;
/* Initialize TIM3 peripheral as follows:
+ Period = 500 - 1
+ Prescaler = ((SystemCoreClock/2)/10000) - 1
+ ClockDivision = 0
+ Counter direction = Up
*/
TimHandle.Init.Period = 500 - 1;
TimHandle.Init.Prescaler = uwPrescalerValue;
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if(HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
{
while(1)
{
}
}
/*##-2- Start the TIM Base generation in interrupt mode ####################*/
/* Start Channel1 */
if(HAL_TIM_Base_Start_IT(&TimHandle) != HAL_OK)
{
while(1)
{
}
}
/***********************************************************/
/* Initialize RTC and Backup */
RTC_Init();
/* Init the STemWin GUI Library */
GUI_Init();
GUI_Initialized = 1;
/* Activate the use of memory device feature */
WM_SetCreateFlags(WM_CF_MEMDEV);
/* Do the calibration if needed */
CALIBRATION_Check();
/* Start Demo */
GUIDEMO_Main();
/* Infinite loop */
for(;;);
}
开发者ID:pierreroth64，项目名称:STM32Cube_FW_F4，代码行数:77，代码来源:main.c
示例12: main
/**
* @brief Main program.
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 180 MHz */
SystemClock_Config();
/* Initialize LCD and LEDs */
BSP_Config();
/***********************************************************/
/* Compute the prescaler value to have TIM3 counter clock equal to 10 KHz */
uwPrescalerValue = (uint32_t) ((SystemCoreClock /2) / 10000) - 1;
/* Set TIMx instance */
TimHandle.Instance = TIM3;
/* Initialize TIM3 peripheral as follows:
+ Period = 500 - 1
+ Prescaler = ((SystemCoreClock/2)/10000) - 1
+ ClockDivision = 0
+ Counter direction = Up
*/
TimHandle.Init.Period = 500 - 1;
TimHandle.Init.Prescaler = uwPrescalerValue;
TimHandle.Init.ClockDivision = 0;
TimHandle.Init.CounterMode = TIM_COUNTERMODE_UP;
if(HAL_TIM_Base_Init(&TimHandle) != HAL_OK)
{
while(1)
{
}
}
/*##-2- Start the TIM Base generation in interrupt mode ####################*/
/* Start Channel1 */
if(HAL_TIM_Base_Start_IT(&TimHandle) != HAL_OK)
{
while(1)
{
}
}
/***********************************************************/
/* Init the STemWin GUI Library */
BSP_SDRAM_Init(); /* Initializes the SDRAM device */
__HAL_RCC_CRC_CLK_ENABLE(); /* Enable the CRC Module */
GUI_Init();
GUI_SetFont(&GUI_Font32_ASCII);
GUI_DispStringAt("Starting...", 0, 0);
/* Initialize LCD and LEDs */
GUI_DispStringAt("Initializing lcd...", 0, 32);
/* Activate the use of memory device feature */
WM_SetCreateFlags(WM_CF_MEMDEV);
MainTask();
/* Infinite loop */
for(;;);
}
开发者ID:PaxInstruments，项目名称:STM32CubeF4，代码行数:78，代码来源:main.c
注：本文中的BSP_Config函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论