C++ BN_add_word函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BN_add_word函数的典型用法代码示例。如果您正苦于以下问题：C++ BN_add_word函数的具体用法？C++ BN_add_word怎么用？C++ BN_add_word使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BN_add_word函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: genrand

// Generate each party's random numbers. xa is in [0, q), xb is in [1, q).
static void genrand(JPakeUser * user, const JPakeParameters * params)
{
    BIGNUM *qm1;

    // xa in [0, q)
    user->xa = BN_new();
    BN_rand_range(user->xa, params->q);

    // q-1
    qm1 = BN_new();
    BN_copy(qm1, params->q);
    BN_sub_word(qm1, 1);

    // ... and xb in [0, q-1)
    user->xb = BN_new();
    BN_rand_range(user->xb, qm1);
    // [1, q)
    BN_add_word(user->xb, 1);

    // cleanup
    BN_free(qm1);

    // Show
    printf("x%d", user->p.base);
    showbn("", user->xa);
    printf("x%d", user->p.base + 1);
    showbn("", user->xb);
}

开发者ID:GrayKing，项目名称:Leakfix-on-OpenSSL，代码行数:29，代码来源:jpakedemo.c

示例2: probable_prime

static int
probable_prime(BIGNUM *rnd, int bits)
{
	int i;
	prime_t mods[NUMPRIMES];
	BN_ULONG delta, maxdelta;

again:
	if (!BN_rand(rnd, bits, 1, 1))
		return (0);
	/* we now have a random number 'rand' to test. */
	for (i = 1; i < NUMPRIMES; i++)
		mods[i] = (prime_t)BN_mod_word(rnd, (BN_ULONG)primes[i]);
	maxdelta = BN_MASK2 - primes[NUMPRIMES - 1];
	delta = 0;
loop:
	for (i = 1; i < NUMPRIMES; i++) {
		/* check that rnd is not a prime and also
		 * that gcd(rnd-1,primes) == 1 (except for 2) */
		if (((mods[i] + delta) % primes[i]) <= 1) {
			delta += 2;
			if (delta > maxdelta)
				goto again;
			goto loop;
		}
	}
	if (!BN_add_word(rnd, delta))
		return (0);
	bn_check_top(rnd);
	return (1);
}

开发者ID:Heratom，项目名称:Firefly-project，代码行数:31，代码来源:bn_prime.c

示例3: bn_rand_range_with_additional_data

static int bn_rand_range_with_additional_data(
    BIGNUM *r, BN_ULONG min_inclusive, const BIGNUM *max_exclusive,
    const uint8_t additional_data[32]) {
  if (BN_cmp_word(max_exclusive, min_inclusive) <= 0) {
    OPENSSL_PUT_ERROR(BN, BN_R_INVALID_RANGE);
    return 0;
  }

  /* This function is used to implement steps 4 through 7 of FIPS 186-4
   * appendices B.4.2 and B.5.2. When called in those contexts, |max_exclusive|
   * is n and |min_inclusive| is one. */
  unsigned count = 100;
  unsigned n = BN_num_bits(max_exclusive); /* n > 0 */
  do {
    if (!--count) {
      OPENSSL_PUT_ERROR(BN, BN_R_TOO_MANY_ITERATIONS);
      return 0;
    }

    if (/* steps 4 and 5 */
        !bn_rand_with_additional_data(r, n, BN_RAND_TOP_ANY, BN_RAND_BOTTOM_ANY,
                                      additional_data) ||
        /* step 7 */
        !BN_add_word(r, min_inclusive)) {
      return 0;
    }

    /* Step 6. This loops if |r| >= |max_exclusive|. This is identical to
     * checking |r| > |max_exclusive| - 1 or |r| - 1 > |max_exclusive| - 2, the
     * formulation stated in FIPS 186-4. */
  } while (BN_cmp(r, max_exclusive) >= 0);

  return 1;
}

开发者ID:ThomasWo，项目名称:proto-quic，代码行数:34，代码来源:random.c

示例4: probable_prime

static int probable_prime(BIGNUM *rnd, int bits)
	{
	int i;
	BN_ULONG mods[NUMPRIMES];
	BN_ULONG delta,d;

again:
	if (!BN_rand(rnd,bits,1,1)) return(0);
	/* we now have a random number 'rand' to test. */
	for (i=1; i<NUMPRIMES; i++)
		mods[i]=BN_mod_word(rnd,(BN_ULONG)primes[i]);
	delta=0;
	loop: for (i=1; i<NUMPRIMES; i++)
		{
		/* check that rnd is not a prime and also
		 * that gcd(rnd-1,primes) == 1 (except for 2) */
		if (((mods[i]+delta)%primes[i]) <= 1)
			{
			d=delta;
			delta+=2;
			/* perhaps need to check for overflow of
			 * delta (but delta can be up to 2^32)
			 * 21-May-98 eay - added overflow check */
			if (delta < d) goto again;
			goto loop;
			}
		}
	if (!BN_add_word(rnd,delta)) return(0);
	return(1);
	}

开发者ID:xyzy，项目名称:mips-openssl_0.9.7，代码行数:30，代码来源:bn_prime.c

示例5: raw_decode_base_n

/*
 * Decode a base_n-encoded string into a byte sequence.
 */
bool raw_decode_base_n(BIGNUM *bn, const char *src, size_t len, int base)
{
	const char *enc;

	BN_zero(bn);

	assert(base == 16 || base == 58);
	switch (base) {
	case 16:
		enc = enc_16;
		break;
	case 58:
		enc = enc_58;
		break;
	}

	while (len) {
		char current = *src;

		if (base == 16)
			current = tolower(current);	/* TODO: Not in ccan. */
		int val = decode_char(current, enc);
		if (val < 0) {
			BN_free(bn);
			return false;
		}
		BN_mul_word(bn, base);
		BN_add_word(bn, val);
		src++;
		len--;
	}

	return true;
}

开发者ID:bitcredit-currency，项目名称:lightning，代码行数:37，代码来源:base58.c

示例6: ssl_x509_serial_copyrand

/*
 * Copy the serial number from src certificate to dst certificate
 * and modify it by a random offset.
 * If reading the serial fails for some reason, generate a new
 * random serial and store it in the dst certificate.
 * Using the same serial is not a good idea since some SSL stacks
 * check for duplicate certificate serials.
 * Returns 0 on success, -1 on error.
 */
int
ssl_x509_serial_copyrand(X509 *dstcrt, X509 *srccrt)
{
	ASN1_INTEGER *srcptr, *dstptr;
	BIGNUM *bnserial;
	unsigned int rand;
	int rv;

#ifndef PURIFY
	rv = ssl_rand(&rand, sizeof(rand));
#else /* PURIFY */
	rand = 0xF001;
	rv = 0;
#endif /* PURIFY */
	dstptr = X509_get_serialNumber(dstcrt);
	srcptr = X509_get_serialNumber(srccrt);
	if ((rv == -1) || !dstptr || !srcptr)
		return -1;
	bnserial = ASN1_INTEGER_to_BN(srcptr, NULL);
	if (!bnserial) {
		/* random 32-bit serial */
		ASN1_INTEGER_set(dstptr, rand);
	} else {
		/* original serial plus random 32-bit offset */
		BN_add_word(bnserial, rand);
		BN_to_ASN1_INTEGER(bnserial, dstptr);
		BN_free(bnserial);
	}
	return 0;
}

开发者ID:caidongyun，项目名称:backup，代码行数:39，代码来源:ssl.c

示例7: strrchr

static ASN1_INTEGER *x509_load_serial(const char *CAfile,
                                      const char *serialfile, int create)
{
    char *buf = NULL;
    ASN1_INTEGER *bs = NULL;
    BIGNUM *serial = NULL;

    if (serialfile == NULL) {
        const char *p = strrchr(CAfile, '.');
        size_t len = p != NULL ? (size_t)(p - CAfile) : strlen(CAfile);

        buf = app_malloc(len + sizeof(POSTFIX), "serial# buffer");
        memcpy(buf, CAfile, len);
        memcpy(buf + len, POSTFIX, sizeof(POSTFIX));
        serialfile = buf;
    }

    serial = load_serial(serialfile, create, NULL);
    if (serial == NULL)
        goto end;

    if (!BN_add_word(serial, 1)) {
        BIO_printf(bio_err, "add_word failure\n");
        goto end;
    }

    if (!save_serial(serialfile, NULL, serial, &bs))
        goto end;

 end:
    OPENSSL_free(buf);
    BN_free(serial);
    return bs;
}

开发者ID:RTEMS，项目名称:rtems-libbsd，代码行数:34，代码来源:x509.c

示例8: ec_GFp_simple_group_set_curve

int ec_GFp_simple_group_set_curve(EC_GROUP *group,
                                  const BIGNUM *p, const BIGNUM *a,
                                  const BIGNUM *b, BN_CTX *ctx)
{
    int ret = 0;
    BN_CTX *new_ctx = NULL;
    BIGNUM *tmp_a;

    /* p must be a prime > 3 */
    if (BN_num_bits(p) <= 2 || !BN_is_odd(p)) {
        ECerr(EC_F_EC_GFP_SIMPLE_GROUP_SET_CURVE, EC_R_INVALID_FIELD);
        return 0;
    }

    if (ctx == NULL) {
        ctx = new_ctx = BN_CTX_new();
        if (ctx == NULL)
            return 0;
    }

    BN_CTX_start(ctx);
    tmp_a = BN_CTX_get(ctx);
    if (tmp_a == NULL)
        goto err;

    /* group->field */
    if (!BN_copy(&group->field, p))
        goto err;
    BN_set_negative(&group->field, 0);

    /* group->a */
    if (!BN_nnmod(tmp_a, a, p, ctx))
        goto err;
    if (group->meth->field_encode) {
        if (!group->meth->field_encode(group, &group->a, tmp_a, ctx))
            goto err;
    } else if (!BN_copy(&group->a, tmp_a))
        goto err;

    /* group->b */
    if (!BN_nnmod(&group->b, b, p, ctx))
        goto err;
    if (group->meth->field_encode)
        if (!group->meth->field_encode(group, &group->b, &group->b, ctx))
            goto err;

    /* group->a_is_minus3 */
    if (!BN_add_word(tmp_a, 3))
        goto err;
    group->a_is_minus3 = (0 == BN_cmp(tmp_a, &group->field));

    ret = 1;

err:
    BN_CTX_end(ctx);
    if (new_ctx != NULL)
        BN_CTX_free(new_ctx);
    return ret;
}

开发者ID:GrayKing，项目名称:Leakfix-on-OpenSSL，代码行数:59，代码来源:ecp_smpl.c

示例9: test_div

int
test_div(BIO *bp, BN_CTX *ctx)
{
	BIGNUM a, b,c, d, e;
	int i;
	int rc = 1;

	BN_init(&a);
	BN_init(&b);
	BN_init(&c);
	BN_init(&d);
	BN_init(&e);

	for (i = 0; i < num0 + num1; i++) {
		if (i < num1) {
			BN_bntest_rand(&a, 400, 0, 0);
			BN_copy(&b, &a);
			BN_lshift(&a, &a, i);
			BN_add_word(&a, i);
		} else
			BN_bntest_rand(&b, 50 + 3*(i - num1), 0, 0);
		a.neg = rand_neg();
		b.neg = rand_neg();
		BN_div(&d, &c, &a, &b, ctx);
		if (bp != NULL) {
			if (!results) {
				BN_print(bp, &a);
				BIO_puts(bp, " / ");
				BN_print(bp, &b);
				BIO_puts(bp, " - ");
			}
			BN_print(bp, &d);
			BIO_puts(bp, "\n");

			if (!results) {
				BN_print(bp, &a);
				BIO_puts(bp, " % ");
				BN_print(bp, &b);
				BIO_puts(bp, " - ");
			}
			BN_print(bp, &c);
			BIO_puts(bp, "\n");
		}
		BN_mul(&e, &d, &b, ctx);
		BN_add(&d, &e, &c);
		BN_sub(&d, &d, &a);
		if (!BN_is_zero(&d)) {
			fprintf(stderr, "Division test failed!\n");
			rc = 0;
			break;
		}
	}
	BN_free(&a);
	BN_free(&b);
	BN_free(&c);
	BN_free(&d);
	BN_free(&e);
	return (rc);
}

开发者ID:NSGod，项目名称:openbsd，代码行数:59，代码来源:bntest.c

示例10: bn_probable_prime_dh_coprime

int bn_probable_prime_dh_coprime(BIGNUM *rnd, int bits, BN_CTX *ctx)
{
    int i;
    BIGNUM *offset_index;
    BIGNUM *offset_count;
    int ret = 0;

    OPENSSL_assert(bits > prime_multiplier_bits);

    BN_CTX_start(ctx);
    if ((offset_index = BN_CTX_get(ctx)) == NULL)
        goto err;
    if ((offset_count = BN_CTX_get(ctx)) == NULL)
        goto err;

    if (!BN_add_word(offset_count, prime_offset_count))
        goto err;

 loop:
    if (!BN_rand(rnd, bits - prime_multiplier_bits, 0, 1))
        goto err;
    if (BN_is_bit_set(rnd, bits))
        goto loop;
    if (!BN_rand_range(offset_index, offset_count))
        goto err;

    if (!BN_mul_word(rnd, prime_multiplier)
        || !BN_add_word(rnd, prime_offsets[BN_get_word(offset_index)]))
        goto err;

    /* we now have a random number 'rand' to test. */

    /* skip coprimes */
    for (i = first_prime_index; i < NUMPRIMES; i++) {
        /* check that rnd is a prime */
        if (BN_mod_word(rnd, (BN_ULONG)primes[i]) <= 1) {
            goto loop;
        }
    }
    ret = 1;

 err:
    BN_CTX_end(ctx);
    bn_check_top(rnd);
    return ret;
}

开发者ID:bevilacqua7，项目名称:openssl，代码行数:46，代码来源:bn_prime.c

示例11: BN_solinas2bn

int BN_solinas2bn(const BN_SOLINAS *solinas, BIGNUM *bn)
{
	int ret = 0;
	BIGNUM *tmp = NULL;

	if (!solinas || !bn) {
		BNerr(BN_F_BN_SOLINAS2BN, ERR_R_MALLOC_FAILURE);
		return 0;
	}

	if (solinas->b <= 0 || solinas->a <= solinas->b
		|| (solinas->s != 1 && solinas->s != -1)
		|| (solinas->c != 1 && solinas->c != -1)) {
		BNerr(BN_F_BN_SOLINAS2BN, BN_R_INVALID_SOLINAS_PARAMETERS);
		return 0;
	}

	if (!(tmp = BN_new())) {
		BNerr(BN_F_BN_SOLINAS2BN, ERR_R_MALLOC_FAILURE);
		goto end;
	}

	BN_one(tmp);

	if (!BN_lshift(bn, tmp, solinas->a)) {
		BNerr(BN_F_BN_SOLINAS2BN, ERR_R_BN_LIB);
		goto end;
	}

	if (!BN_lshift(tmp, tmp, solinas->b)) {
		BNerr(BN_F_BN_SOLINAS2BN, ERR_R_BN_LIB);
		goto end;
	}

	if (!BN_add_word(tmp, solinas->c)) {
		BNerr(BN_F_BN_SOLINAS2BN, ERR_R_BN_LIB);
		goto end;
	}

	if (solinas->s > 0) {
		if (!BN_add(bn, bn, tmp)) {
			BNerr(BN_F_BN_SOLINAS2BN, ERR_R_BN_LIB);
			goto end;
		}
	} else {
		if (!BN_sub(bn, bn, tmp)) {
			BNerr(BN_F_BN_SOLINAS2BN, ERR_R_BN_LIB);
			goto end;
		}
	}

	/* check if it is a prime */

	ret = 1;
end:
	BN_free(tmp);
	return ret;
}

开发者ID:zsdev2015，项目名称:GmSSL，代码行数:58，代码来源:bn_solinas.c

示例12: BN_dec2bn

int BN_dec2bn(BIGNUM **bn, const char *a)
	{
	BIGNUM *ret=NULL;
	BN_ULONG l=0;
	int neg=0,i,j;
	int num;

	if ((a == NULL) || (*a == '\0')) return(0);
	if (*a == '-') { neg=1; a++; }

	for (i=0; isdigit((unsigned char) a[i]); i++)
		;

	num=i+neg;
	if (bn == NULL) return(num);

	/* a is the start of the digits, and it is 'i' long.
	 * We chop it into BN_DEC_NUM digits at a time */
	if (*bn == NULL)
		{
		if ((ret=BN_new()) == NULL) return(0);
		}
	else
		{
		ret= *bn;
		BN_zero(ret);
		}

	/* i is the number of digests, a bit of an over expand; */
	if (bn_expand(ret,i*4) == NULL) goto err;

	j=BN_DEC_NUM-(i%BN_DEC_NUM);
	if (j == BN_DEC_NUM) j=0;
	l=0;
	while (*a)
		{
		l*=10;
		l+= *a-'0';
		a++;
		if (++j == BN_DEC_NUM)
			{
			BN_mul_word(ret,BN_DEC_CONV);
			BN_add_word(ret,l);
			l=0;
			j=0;
			}
		}
	ret->neg=neg;

	bn_correct_top(ret);
	*bn=ret;
	bn_check_top(ret);
	return(num);
err:
	if (*bn == NULL) BN_free(ret);
	return(0);
	}

开发者ID:Valbonjv，项目名称:QuickSMS，代码行数:57，代码来源:bn_print.c

示例13: test_div

int test_div(BIO *bp, BN_CTX *ctx)
{
    BIGNUM *a, *b, *c, *d, *e;
    int i;

    a = BN_new();
    b = BN_new();
    c = BN_new();
    d = BN_new();
    e = BN_new();

    for (i = 0; i < num0 + num1; i++) {
        if (i < num1) {
            BN_bntest_rand(a, 400, 0, 0);
            BN_copy(b, a);
            BN_lshift(a, a, i);
            BN_add_word(a, i);
        } else
            BN_bntest_rand(b, 50 + 3 * (i - num1), 0, 0);
        a->neg = rand_neg();
        b->neg = rand_neg();
        BN_div(d, c, a, b, ctx);
        if (bp != NULL) {
            if (!results) {
                BN_print(bp, a);
                BIO_puts(bp, " / ");
                BN_print(bp, b);
                BIO_puts(bp, " - ");
            }
            BN_print(bp, d);
            BIO_puts(bp, "\n");

            if (!results) {
                BN_print(bp, a);
                BIO_puts(bp, " % ");
                BN_print(bp, b);
                BIO_puts(bp, " - ");
            }
            BN_print(bp, c);
            BIO_puts(bp, "\n");
        }
        BN_mul(e, d, b, ctx);
        BN_add(d, e, c);
        BN_sub(d, d, a);
        if (!BN_is_zero(d)) {
            fprintf(stderr, "Division test failed!\n");
            return 0;
        }
    }
    BN_free(a);
    BN_free(b);
    BN_free(c);
    BN_free(d);
    BN_free(e);
    return (1);
}

开发者ID:Adallom，项目名称:openssl，代码行数:56，代码来源:bntest.c

示例14: probable_prime_dh

static int probable_prime_dh(BIGNUM *rnd, int bits, const BIGNUM *add,
                             const BIGNUM *rem, BN_CTX *ctx) {
  int i, ret = 0;
  BIGNUM *t1;

  BN_CTX_start(ctx);
  if ((t1 = BN_CTX_get(ctx)) == NULL) {
    goto err;
  }

  if (!BN_rand(rnd, bits, BN_RAND_TOP_ONE, BN_RAND_BOTTOM_ODD)) {
    goto err;
  }

  /* we need ((rnd-rem) % add) == 0 */

  if (!BN_mod(t1, rnd, add, ctx)) {
    goto err;
  }
  if (!BN_sub(rnd, rnd, t1)) {
    goto err;
  }
  if (rem == NULL) {
    if (!BN_add_word(rnd, 1)) {
      goto err;
    }
  } else {
    if (!BN_add(rnd, rnd, rem)) {
      goto err;
    }
  }
  /* we now have a random number 'rand' to test. */

loop:
  for (i = 1; i < NUMPRIMES; i++) {
    /* check that rnd is a prime */
    BN_ULONG mod = BN_mod_word(rnd, (BN_ULONG)primes[i]);
    if (mod == (BN_ULONG)-1) {
      goto err;
    }
    if (mod <= 1) {
      if (!BN_add(rnd, rnd, add)) {
        goto err;
      }
      goto loop;
    }
  }

  ret = 1;

err:
  BN_CTX_end(ctx);
  return ret;
}

开发者ID:ThomasWo，项目名称:proto-quic，代码行数:54，代码来源:prime.c

示例15: bn_x931_derive_pi

static int bn_x931_derive_pi(BIGNUM *pi, const BIGNUM *Xpi, BN_CTX *ctx,
                             BN_GENCB *cb)
{
    int i = 0;
    if (!BN_copy(pi, Xpi))
        return 0;
    if (!BN_is_odd(pi) && !BN_add_word(pi, 1))
        return 0;
    for (;;) {
        i++;
        BN_GENCB_call(cb, 0, i);
        /* NB 27 MR is specificed in X9.31 */
        if (BN_is_prime_fasttest_ex(pi, 27, ctx, 1, cb))
            break;
        if (!BN_add_word(pi, 2))
            return 0;
    }
    BN_GENCB_call(cb, 2, i);
    return 1;
}

开发者ID:AndreV84，项目名称:openssl，代码行数:20，代码来源:bn_x931p.c

示例16: BN_sub_word

int BN_sub_word(BIGNUM *a, BN_ULONG w)
  {
  int i;

  bn_check_top(a);
  w &= BN_MASK2;

  /* degenerate case: w is zero */
  if (!w) return 1;
  /* degenerate case: a is zero */
  if(BN_is_zero(a))
    {
    i = BN_set_word(a,w);
    if (i != 0)
      BN_set_negative(a, 1);
    return i;
    }
  /* handle 'a' when negative */
  if (a->neg)
    {
    a->neg=0;
    i=BN_add_word(a,w);
    a->neg=1;
    return(i);
    }

  if ((a->top == 1) && (a->d[0] < w))
    {
    a->d[0]=w-a->d[0];
    a->neg=1;
    return(1);
    }
  i=0;
  for (;;)
    {
    if (a->d[i] >= w)
      {
      a->d[i]-=w;
      break;
      }
    else
      {
      a->d[i]=(a->d[i]-w)&BN_MASK2;
      i++;
      w=1;
      }
    }
  if ((a->d[i] == 0) && (i == (a->top-1)))
    a->top--;
  bn_check_top(a);
  return(1);
  }

开发者ID:yyyyyao，项目名称:Slicer3-lib-mirrors，代码行数:52，代码来源:bn_word.c

示例17: test_check_public_key

static int test_check_public_key(void)
{
    int ret = 0;
    BIGNUM *n = NULL, *e = NULL;
    RSA *key = NULL;

    ret = TEST_ptr(key = RSA_new())
          /* check NULL pointers fail */
          && TEST_false(rsa_sp800_56b_check_public(key))
          /* load public key */
          && TEST_ptr(e = bn_load_new(cav_e, sizeof(cav_e)))
          && TEST_ptr(n = bn_load_new(cav_n, sizeof(cav_n)))
          && TEST_true(RSA_set0_key(key, n, e, NULL));
    if (!ret) {
        BN_free(e);
        BN_free(n);
        goto end;
    }
    /* check public key is valid */
    ret = TEST_true(rsa_sp800_56b_check_public(key))
          /* check fail if n is even */
          && TEST_true(BN_add_word(n, 1))
          && TEST_false(rsa_sp800_56b_check_public(key))
          && TEST_true(BN_sub_word(n, 1))
          /* check fail if n is wrong number of bits */
          && TEST_true(BN_lshift1(n, n))
          && TEST_false(rsa_sp800_56b_check_public(key))
          && TEST_true(BN_rshift1(n, n))
          /* test odd exponent fails */
          && TEST_true(BN_add_word(e, 1))
          && TEST_false(rsa_sp800_56b_check_public(key))
          && TEST_true(BN_sub_word(e, 1))
          /* modulus fails composite check */
          && TEST_true(BN_add_word(n, 2))
          && TEST_false(rsa_sp800_56b_check_public(key));
end:
    RSA_free(key);
    return ret;
}

开发者ID:Ana06，项目名称:openssl，代码行数:39，代码来源:rsa_sp800_56b_test.c

示例18: readnumber

struct number *
readnumber(struct source *src, u_int base)
{
	struct number	*n;
	int		ch;
	bool		sign = false;
	bool		dot = false;
	BN_ULONG	v;
	u_int		i;

	n = new_number();
	bn_check(BN_zero(n->number));

	while ((ch = (*src->vtable->readchar)(src)) != EOF) {

		if ('0' <= ch && ch <= '9')
			v = ch - '0';
		else if ('A' <= ch && ch <= 'F')
			v = ch - 'A' + 10;
		else if (ch == '_') {
			sign = true;
			continue;
		} else if (ch == '.') {
			if (dot)
				break;
			dot = true;
			continue;
		} else {
			(*src->vtable->unreadchar)(src);
			break;
		}
		if (dot)
			n->scale++;

		bn_check(BN_mul_word(n->number, base));

#if 0
		/* work around a bug in BN_add_word: 0 += 0 is buggy.... */
		if (v > 0)
#endif
			bn_check(BN_add_word(n->number, v));
	}
	if (base != 10) {
		scale_number(n->number, n->scale);
		for (i = 0; i < n->scale; i++)
			(void)BN_div_word(n->number, base);
	}
	if (sign)
		negate(n);
	return n;
}

开发者ID:StarchLinux，项目名称:coreutils，代码行数:51，代码来源:inout.c

示例19: test_sub

int test_sub(BIO *bp)
	{
	BIGNUM a,b,c;
	int i;

	BN_init(&a);
	BN_init(&b);
	BN_init(&c);

	for (i=0; i<num0+num1; i++)
		{
		if (i < num1)
			{
			BN_bntest_rand(&a,512,0,0);
			BN_copy(&b,&a);
			if (BN_set_bit(&a,i)==0) return(0);
			BN_add_word(&b,i);
			}
		else
			{
			BN_bntest_rand(&b,400+i-num1,0,0);
			a.neg=rand_neg();
			b.neg=rand_neg();
			}
		BN_sub(&c,&a,&b);
		if (bp != NULL)
			{
			if (!results)
				{
				BN_print(bp,&a);
				BIO_puts(bp," - ");
				BN_print(bp,&b);
				BIO_puts(bp," - ");
				}
			BN_print(bp,&c);
			BIO_puts(bp,"\n");
			}
		BN_add(&c,&c,&b);
		BN_sub(&c,&c,&a);
		if(!BN_is_zero(&c))
		    {
		    fprintf(stderr,"Subtract test failed!\n");
		    return 0;
		    }
		}
	BN_free(&a);
	BN_free(&b);
	BN_free(&c);
	return(1);
	}

开发者ID:002301，项目名称:node，代码行数:50，代码来源:bntest.c

示例20: strlen

static ASN1_INTEGER *x509_load_serial (char *CAfile, char *serialfile, int create)
{
    char *buf = NULL, *p;

    ASN1_INTEGER *bs = NULL;

    BIGNUM *serial = NULL;

    size_t len;

    len = ((serialfile == NULL) ? (strlen (CAfile) + strlen (POSTFIX) + 1) : (strlen (serialfile))) + 1;
    buf = OPENSSL_malloc (len);
    if (buf == NULL)
    {
        BIO_printf (bio_err, "out of mem\n");
        goto end;
    }
    if (serialfile == NULL)
    {
        BUF_strlcpy (buf, CAfile, len);
        for (p = buf; *p; p++)
            if (*p == '.')
            {
                *p = '\0';
                break;
            }
        BUF_strlcat (buf, POSTFIX, len);
    }
    else
        BUF_strlcpy (buf, serialfile, len);

    serial = load_serial (buf, create, NULL);
    if (serial == NULL)
        goto end;

    if (!BN_add_word (serial, 1))
    {
        BIO_printf (bio_err, "add_word failure\n");
        goto end;
    }

    if (!save_serial (buf, NULL, serial, &bs))
        goto end;

  end:
    if (buf)
        OPENSSL_free (buf);
    BN_free (serial);
    return bs;
}

开发者ID:274914765，项目名称:C，代码行数:50，代码来源:x509.c

注：本文中的BN_add_word函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BN_bin2bn函数代码示例发布时间：2022-05-30

C++ BN_add函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19150|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9975|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8687|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8628|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9644|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8612|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ BN_add_word函数代码示例

示例1: genrand

示例2: probable_prime

示例3: bn_rand_range_with_additional_data

示例4: probable_prime

示例5: raw_decode_base_n

示例6: ssl_x509_serial_copyrand

示例7: strrchr

示例8: ec_GFp_simple_group_set_curve

示例9: test_div

示例10: bn_probable_prime_dh_coprime

示例11: BN_solinas2bn

示例12: BN_dec2bn

示例13: test_div

示例14: probable_prime_dh

示例15: bn_x931_derive_pi

示例16: BN_sub_word

示例17: test_check_public_key

示例18: readnumber

示例19: test_sub

示例20: strlen

请发表评论

全部评论

上一篇：

下一篇：

krishnaik06/Machine-Learning-in-90-days

armancodv/building-energy-model-matlab:

美元符号为什么是“$”

爸的笔顺,分析爸的笔画,说说爸的部首

FGRibreau/import-tweets-to-mastodon: How

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053