C++ BIT_WORD函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BIT_WORD函数的典型用法代码示例。如果您正苦于以下问题：C++ BIT_WORD函数的具体用法？C++ BIT_WORD怎么用？C++ BIT_WORD使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BIT_WORD函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: soundtrigger_input_init

static int soundtrigger_input_init(struct device *dev)
{
	int error = 0;

	soundtrigger_input_dev = input_allocate_device();
	if (!soundtrigger_input_dev) {
		pr_err("failed to allocate memory for input dev\n");
		error = -ENOMEM;
		goto err_dev;
	}

	soundtrigger_input_dev->name = "soundtrigger_input_dev";

	soundtrigger_input_dev->evbit[0] = BIT_MASK(EV_KEY);
	soundtrigger_input_dev->keybit[BIT_WORD(KEY_F14)] |= BIT_MASK(KEY_F14);
	soundtrigger_input_dev->keybit[BIT_WORD(KEY_F15)] |= BIT_MASK(KEY_F15);
	soundtrigger_input_dev->keybit[BIT_WORD(KEY_F16)] |= BIT_MASK(KEY_F16);
	soundtrigger_input_dev->keybit[BIT_WORD(KEY_F17)] |= BIT_MASK(KEY_F17);
	soundtrigger_input_dev->keybit[BIT_WORD(KEY_F18)] |= BIT_MASK(KEY_F18);
	error = input_register_device(soundtrigger_input_dev);
	if(error < 0) {
		pr_err("input register device failed, error_no is %d.\n", error);
		goto err_free_dev;
	}
	pr_info("input register device successful.\n");
	return 0;

err_free_dev:
	input_free_device(soundtrigger_input_dev);

err_dev:
	pr_err("error_no is %d.\n", error);

	return error;
}

开发者ID:fly2436732935，项目名称:android_kernel_honor7_PLK-AL10_PLK-TL01H_PLK-UL00_PLK-CL00_PLK-TL00，代码行数:35，代码来源:hi6402_mbhc.c

示例2: input_dev_i3s

void input_dev_i3s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
    input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
    input_dev->keybit[BIT_WORD(BTN_LEFT)] |= BIT_MASK(BTN_0) |
            BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
    input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
}

开发者ID:acassis，项目名称:emlinux-ssd1935，代码行数:7，代码来源:wacom_sys.c

示例3: input_dev_i4s

void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) | BIT_MASK(BTN_1) | BIT_MASK(BTN_2) | BIT_MASK(BTN_3);
	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_4) | BIT_MASK(BTN_5) | BIT_MASK(BTN_6);
	input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:7，代码来源:wacom_sys.c

示例4: input_dev_g4

void input_dev_g4(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
	input_dev->evbit[0] |= BIT_MASK(EV_MSC);
	input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_FINGER);
	input_dev->keybit[BIT_WORD(BTN_MISC)] |= BIT_MASK(BTN_0) |
		BIT_MASK(BTN_4);
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:8，代码来源:wacom_sys.c

示例5: input_dev_bamboo_pt

void input_dev_bamboo_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
	input_dev->absbit[BIT_WORD(ABS_MISC)] &= ~ABS_MISC;
	/* for now, BAMBOO_PT will only handle pen */
	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
		BIT_MASK(BTN_STYLUS2);
	input_set_abs_params(input_dev, ABS_DISTANCE, 0,
			     wacom_wac->features->distance_max, 0, 0);
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:9，代码来源:wacom_sys.c

示例6: input_dev_g

void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
	input_dev->evbit[0] |= BIT_MASK(EV_REL);
	input_dev->relbit[0] |= BIT_MASK(REL_WHEEL);
	input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
	input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
		BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
	input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
}

开发者ID:daveti，项目名称:prov-kernel，代码行数:10，代码来源:wacom_sys.c

示例7: check_fd

static int check_fd(struct tslib_input *i)
{
	struct tsdev *ts = i->module.dev;
	int version;
	long evbit[BITS_TO_LONGS(EV_CNT)];
	long absbit[BITS_TO_LONGS(ABS_CNT)];
	long keybit[BITS_TO_LONGS(KEY_CNT)];

	if (ioctl(ts->fd, EVIOCGVERSION, &version) < 0) {
		fprintf(stderr, "tslib: Selected device is not a Linux input event device\n");
		return -1;
	}

	/* support version EV_VERSION 0x010000 and 0x010001
	 * this check causes more troubles than it solves here */
	if (version < EV_VERSION)
		fprintf(stderr, "tslib: Warning: Selected device uses a different version of the event protocol than tslib was compiled for\n");

	if ( (ioctl(ts->fd, EVIOCGBIT(0, sizeof(evbit)), evbit) < 0) ||
		!(evbit[BIT_WORD(EV_ABS)] & BIT_MASK(EV_ABS)) ||
		!(evbit[BIT_WORD(EV_KEY)] & BIT_MASK(EV_KEY)) ) {
		fprintf(stderr, "tslib: Selected device is not a touchscreen (must support ABS and KEY event types)\n");
		return -1;
	}

	if ((ioctl(ts->fd, EVIOCGBIT(EV_ABS, sizeof(absbit)), absbit)) < 0 ||
		!(absbit[BIT_WORD(ABS_X)] & BIT_MASK(ABS_X)) ||
		!(absbit[BIT_WORD(ABS_Y)] & BIT_MASK(ABS_Y))) {
		fprintf(stderr, "tslib: Selected device is not a touchscreen (must support ABS_X and ABS_Y events)\n");
		return -1;
	}

	/* Since some touchscreens (eg. infrared) physically can't measure pressure,
	the input system doesn't report it on those. Tslib relies on pressure, thus
	we set it to constant 255. It's still controlled by BTN_TOUCH/BTN_LEFT -
	when not touched, the pressure is forced to 0. */

	if (!(absbit[BIT_WORD(ABS_PRESSURE)] & BIT_MASK(ABS_PRESSURE)))
		i->no_pressure = 1;

	if ((ioctl(ts->fd, EVIOCGBIT(EV_KEY, sizeof(keybit)), keybit) < 0) ||
		!(keybit[BIT_WORD(BTN_TOUCH)] & BIT_MASK(BTN_TOUCH) ||
		  keybit[BIT_WORD(BTN_LEFT)] & BIT_MASK(BTN_LEFT))) {
		fprintf(stderr, "tslib: Selected device is not a touchscreen (must support BTN_TOUCH or BTN_LEFT events)\n");
		return -1;
	}

	if (evbit[BIT_WORD(EV_SYN)] & BIT_MASK(EV_SYN))
		i->using_syn = 1;

	if (i->grab_events == GRAB_EVENTS_WANTED) {
		if (ioctl(ts->fd, EVIOCGRAB, (void *)1)) {
			fprintf(stderr, "tslib: Unable to grab selected input device\n");
			return -1;
		}
		i->grab_events = GRAB_EVENTS_ACTIVE;
	}

	return ts->fd;
}

开发者ID:gonzoua，项目名称:tslib，代码行数:60，代码来源:input-raw.c

示例8: bfilter_get_hash

int bfilter_get_hash(struct bloom_filter *bf, unsigned long hash)
{
	unsigned long *addr;
	hash = hash % bf->nbits;
	addr = bf->bitmap + BIT_WORD(hash);
	return test_bit(hash & (BITS_PER_LONG - 1), addr);
}

开发者ID:iiiyu，项目名称:oh-my-ulib，代码行数:7，代码来源:bfilter.c

示例9: copy_abs

static void copy_abs(struct input_dev *dev, unsigned int dst, unsigned int src)
{
	if (dev->absinfo && test_bit(src, dev->absbit)) {
		dev->absinfo[dst] = dev->absinfo[src];
		dev->absbit[BIT_WORD(dst)] |= BIT_MASK(dst);
	}
}

开发者ID:AdrianHuang，项目名称:linux-3.8.13，代码行数:7，代码来源:input-mt.c

示例10: retubutton_init

/**
 * Init function.
 * Allocates interrupt for power button and registers itself to input layer.
 */
static int __init retubutton_init(void)
{
	int irq;

	printk(KERN_INFO "Retu power button driver initialized\n");
	irq = RETU_INT_PWR;

	init_timer(&pwrbtn_timer);
	pwrbtn_timer.function = retubutton_timer_func;

	if (retu_request_irq(irq, &retubutton_irq, 0, "PwrOnX") < 0) {
		printk(KERN_ERR "%[email protected]%s: Cannot allocate irq\n",
		       __FUNCTION__, __FILE__);
		return -EBUSY;
	}

	pwrbtn_dev = input_allocate_device();
	if (!pwrbtn_dev)
		return -ENOMEM;

	pwrbtn_dev->evbit[0] = BIT_MASK(EV_KEY);
	pwrbtn_dev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
	pwrbtn_dev->name = "retu-pwrbutton";

	return input_register_device(pwrbtn_dev);
}

开发者ID:Aircell，项目名称:asp-kernel，代码行数:30，代码来源:retu-pwrbutton.c

示例11: input_allocate_device

static struct input_dev *alloc_and_register(void)
{
	int error;
	struct input_dev *tmp = input_allocate_device();
	if (!tmp)
		return ERR_PTR(-ENOMEM);

	tmp->name = "IR emulated Mouse";
	tmp->phys = "irmouse/input0";
	tmp->id.bustype = BUS_HOST;
	tmp->id.vendor = 0x0001;
	tmp->id.product = 0x0001;
	tmp->id.version = 0x0100;
	tmp->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	tmp->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_RIGHT);
	tmp->relbit[0]	= BIT_MASK(REL_X) | BIT_MASK(REL_Y);
	tmp->open = ir_input_open;
	error = input_register_device(tmp);
	if (error) {
		printk("unable to register IR-emu mouse\n");
		input_free_device(tmp);
		return ERR_PTR(error);
	}
	return tmp;

}

开发者ID:deepikateriar，项目名称:Onlive-Source-Backup，代码行数:27，代码来源:ir_main.c

示例12: amimouse_init

static int __init amimouse_init(void)
{
	int err;

	if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_MOUSE))
		return -ENODEV;

	amimouse_dev = input_allocate_device();
	if (!amimouse_dev)
		return -ENOMEM;

	amimouse_dev->name = "Amiga mouse";
	amimouse_dev->phys = "amimouse/input0";
	amimouse_dev->id.bustype = BUS_AMIGA;
	amimouse_dev->id.vendor = 0x0001;
	amimouse_dev->id.product = 0x0002;
	amimouse_dev->id.version = 0x0100;

	amimouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	amimouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
	amimouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
	amimouse_dev->open = amimouse_open;
	amimouse_dev->close = amimouse_close;

	err = input_register_device(amimouse_dev);
	if (err) {
		input_free_device(amimouse_dev);
		return err;
	}

	return 0;
}

开发者ID:johnny，项目名称:CobraDroidBeta，代码行数:33，代码来源:amimouse.c

示例13: button_init

static int __init button_init(void) 
{ 
	int error; 

	if (request_irq(BUTTON_IRQ, button_interrupt, IRQ_TYPE_EDGE_BOTH , "button", NULL)) { 
//	if (request_irq(BUTTON_IRQ, button_interrupt, IRQ_TYPE_EDGE_FALLING , "button", NULL)) { 
		printk(KERN_ERR "button.c: Can't allocate irq %d\n", BUTTON_IRQ); 
        return -EBUSY; 
    } 

	button_dev = input_allocate_device(); 
	if (!button_dev) { 
		printk(KERN_ERR "button.c: Not enough memory\n"); 
		error = -ENOMEM; 
		goto err_free_irq; 
	} 

	button_dev->evbit[0] = BIT_MASK(EV_KEY); 
	button_dev->keybit[BIT_WORD(BTN_0)] = BIT_MASK(BTN_0); 
	button_dev->name = "button"; //input: Unspecified device as /devices/virtual/input/input7
	error = input_register_device(button_dev); 
	if (error) { 
		printk(KERN_ERR "button.c: Failed to register device\n"); 
		goto err_free_dev; 
	} 

 return 0; 

 err_free_dev: 
	input_free_device(button_dev); 
 err_free_irq: 
	free_irq(BUTTON_IRQ, button_interrupt); 
 return error; 
}

开发者ID:hubuyu，项目名称:9-3，代码行数:34，代码来源:button.c

示例14: bfilter_clear_hash

void bfilter_clear_hash(struct bloom_filter *bf, unsigned long hash)
{
	unsigned long *addr;
	hash = hash % bf->nbits;
	addr = bf->bitmap + BIT_WORD(hash);
	clear_bit(hash & (BITS_PER_LONG - 1), addr);
}

开发者ID:iiiyu，项目名称:oh-my-ulib，代码行数:7，代码来源:bfilter.c

示例15: vmouse_input_dev_setup

static int vmouse_input_dev_setup(void)
{
    int ret = 0;
    vmouse_idev = input_allocate_device();
 
    if(vmouse_idev == NULL)
    {
        return -ENOMEM;
    }
 
    vmouse_idev->name = "vmouse";
    vmouse_idev->phys = "vmouse/input0";
	vmouse_idev->id.bustype = BUS_HOST;
	vmouse_idev->id.product = 0x0001;
	vmouse_idev->id.vendor = 0x0002;
	vmouse_idev->id.version = 0x0100;
    vmouse_idev->open = vmouse_input_dev_open;
    vmouse_idev->close = vmouse_input_dev_close;

	vmouse_idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	vmouse_idev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_TOUCH);
	vmouse_idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | BIT_MASK(REL_WHEEL) | BIT_MASK(REL_HWHEEL);
 
    ret = input_register_device(vmouse_idev);
 
    return ret;
}

开发者ID:Vassilko，项目名称:lichee，代码行数:28，代码来源:virtualmouse.c

示例16: atamouse_init

static int __init atamouse_init(void)
{
	if (!MACH_IS_ATARI || !ATARIHW_PRESENT(ST_MFP))
		return -ENODEV;

	if (!(atari_keyb_init()))
		return -ENODEV;

	atamouse_dev = input_allocate_device();
	if (!atamouse_dev)
		return -ENOMEM;

	atamouse_dev->name = "Atari mouse";
	atamouse_dev->phys = "atamouse/input0";
	atamouse_dev->id.bustype = BUS_HOST;
	atamouse_dev->id.vendor = 0x0001;
	atamouse_dev->id.product = 0x0002;
	atamouse_dev->id.version = 0x0100;

	atamouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	atamouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
	atamouse_dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
	atamouse_dev->open = atamouse_open;
	atamouse_dev->close = atamouse_close;

	if (input_register_device(atamouse_dev)) {
		input_free_device(atamouse_dev);
		return -ENOMEM;
	}

	return 0;
}

开发者ID:PennPanda，项目名称:linux-repo，代码行数:33，代码来源:atarimouse.c

示例17: amimouse_probe

static int __init amimouse_probe(struct platform_device *pdev)
{
	int err;
	struct input_dev *dev;

	dev = input_allocate_device();
	if (!dev)
		return -ENOMEM;

	dev->name = pdev->name;
	dev->phys = "amimouse/input0";
	dev->id.bustype = BUS_AMIGA;
	dev->id.vendor = 0x0001;
	dev->id.product = 0x0002;
	dev->id.version = 0x0100;

	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
	dev->keybit[BIT_WORD(BTN_LEFT)] = BIT_MASK(BTN_LEFT) |
		BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
	dev->open = amimouse_open;
	dev->close = amimouse_close;
	dev->dev.parent = &pdev->dev;

	err = input_register_device(dev);
	if (err) {
		input_free_device(dev);
		return err;
	}

	platform_set_drvdata(pdev, dev);

	return 0;
}

开发者ID:1111saeid，项目名称:jb_kernel_3.0.16_htc_golfu，代码行数:34，代码来源:amimouse.c

示例18: cp_intc_set_irq_type

static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type)
{
	unsigned reg		= BIT_WORD(d->irq);
	unsigned mask		= BIT_MASK(d->irq);
	unsigned polarity	= cp_intc_read(CP_INTC_SYS_POLARITY(reg));
	unsigned type		= cp_intc_read(CP_INTC_SYS_TYPE(reg));

	switch (flow_type) {
	case IRQ_TYPE_EDGE_RISING:
		polarity |= mask;
		type |= mask;
		break;
	case IRQ_TYPE_EDGE_FALLING:
		polarity &= ~mask;
		type |= mask;
		break;
	case IRQ_TYPE_LEVEL_HIGH:
		polarity |= mask;
		type &= ~mask;
		break;
	case IRQ_TYPE_LEVEL_LOW:
		polarity &= ~mask;
		type &= ~mask;
		break;
	default:
		return -EINVAL;
	}

	cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
	cp_intc_write(type, CP_INTC_SYS_TYPE(reg));

	return 0;
}

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:33，代码来源:cp_intc.c

示例19: mac_hid_create_emumouse

static int mac_hid_create_emumouse(void)
{
	static struct lock_class_key mac_hid_emumouse_dev_event_class;
	static struct lock_class_key mac_hid_emumouse_dev_mutex_class;
	int err;

	mac_hid_emumouse_dev = input_allocate_device();
	if (!mac_hid_emumouse_dev)
		return -ENOMEM;

	lockdep_set_class(&mac_hid_emumouse_dev->event_lock,
			  &mac_hid_emumouse_dev_event_class);
	lockdep_set_class(&mac_hid_emumouse_dev->mutex,
			  &mac_hid_emumouse_dev_mutex_class);

	mac_hid_emumouse_dev->name = "Macintosh mouse button emulation";
	mac_hid_emumouse_dev->id.bustype = BUS_ADB;
	mac_hid_emumouse_dev->id.vendor = 0x0001;
	mac_hid_emumouse_dev->id.product = 0x0001;
	mac_hid_emumouse_dev->id.version = 0x0100;

	mac_hid_emumouse_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	mac_hid_emumouse_dev->keybit[BIT_WORD(BTN_MOUSE)] =
		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);
	mac_hid_emumouse_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);

	err = input_register_device(mac_hid_emumouse_dev);
	if (err) {
		input_free_device(mac_hid_emumouse_dev);
		mac_hid_emumouse_dev = NULL;
		return err;
	}

	return 0;
}

开发者ID:A2109devs，项目名称:lenovo_a2109a_kernel，代码行数:35，代码来源:mac_hid.c

示例20: mxc_ts_init

static int __init mxc_ts_init(void)
{
	int retval;

	if (!is_pmic_adc_ready())
		return -ENODEV;

	mxc_inputdev = input_allocate_device();
	if (!mxc_inputdev) {
		printk(KERN_ERR
		       "mxc_ts_init: not enough memory\n");
		return -ENOMEM;
	}

	mxc_inputdev->name = MXC_TS_NAME;
	mxc_inputdev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
	mxc_inputdev->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
	mxc_inputdev->absbit[0] =
	    BIT_MASK(ABS_X) | BIT_MASK(ABS_Y) | BIT_MASK(ABS_PRESSURE);
	retval = input_register_device(mxc_inputdev);
	if (retval < 0) {
		input_free_device(mxc_inputdev);
		return retval;
	}

	tstask = kthread_run(ts_thread, NULL, "mxc_ts");
	if (IS_ERR(tstask)) {
		printk(KERN_ERR
			"mxc_ts_init: failed to create kthread");
		tstask = NULL;
		return -1;
	}
	printk("mxc input touchscreen loaded\n");
	return 0;
}

开发者ID:fread-ink，项目名称:fread-kernel-k4，代码行数:35，代码来源:mxc_ts.c

注：本文中的BIT_WORD函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BJAM_FREE函数代码示例发布时间：2022-05-30

C++ BIT_SET函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19149|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9974|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8687|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8628|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ BIT_WORD函数代码示例

示例1: soundtrigger_input_init

示例2: input_dev_i3s

示例3: input_dev_i4s

示例4: input_dev_g4

示例5: input_dev_bamboo_pt

示例6: input_dev_g

示例7: check_fd

示例8: bfilter_get_hash

示例9: copy_abs

示例10: retubutton_init

示例11: input_allocate_device

示例12: amimouse_init

示例13: button_init

示例14: bfilter_clear_hash

示例15: vmouse_input_dev_setup

示例16: atamouse_init

示例17: amimouse_probe

示例18: cp_intc_set_irq_type

示例19: mac_hid_create_emumouse

示例20: mxc_ts_init

请发表评论

全部评论

上一篇：

下一篇：

MikeMcQuaid/strap:

headcr4sh/node-maven: Maven for Node.js

CVE-2022-26527

traex/RippleEffect: Implementation of Ri

csimmonds/procrank_linux: procrank from

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053