C++ BITFVAL函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BITFVAL函数的典型用法代码示例。如果您正苦于以下问题：C++ BITFVAL函数的具体用法？C++ BITFVAL怎么用？C++ BITFVAL使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BITFVAL函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: mc13892_sw_dvs_set_voltage

static int mc13892_sw_dvs_set_voltage(struct regulator *reg, int uV)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1 = 0;
	int voltage, sw = reg->id, mV = uV / 1000, hi;

	hi = mc13892_get_sw_hi_bit(sw);
	voltage = mc13892_get_voltage_value(hi, mV);

	switch (sw) {
	case MC13892_SW1:
		register1 = REG_SW_0;
		register_val = BITFVAL(SW1_DVS, voltage);
		register_mask = BITFMASK(SW1_DVS);
		break;
	case MC13892_SW2:
		register1 = REG_SW_1;
		register_val = BITFVAL(SW2_DVS, voltage);
		register_mask = BITFMASK(SW2_DVS);
		break;
	default:
		return -EINVAL;
	}

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:26，代码来源:reg-mc13892.c

示例2: tps6518x_display_disable

static int tps6518x_display_disable(struct regulator_dev *reg)
{
	struct tps6518x *tps6518x = rdev_get_drvdata(reg);
	unsigned int cur_reg_val; /* current register value to modify */
	unsigned int fld_mask;	  /* register mask for bitfield to modify */
	unsigned int fld_val;	  /* new bitfield value to write */
	unsigned int new_reg_val; /* new register value to write */



	if (tps6518x->revID == 65182)
	{
		epdc_pwr0_disable(reg);
	}
	else
	{
		/* turn off display regulators */
		cur_reg_val = tps65180_current_Enable_Register & 0x3f;
		fld_mask = BITFMASK(VCOM_EN) | BITFMASK(STANDBY);
		fld_val = BITFVAL(VCOM_EN, false) | BITFVAL(STANDBY, true);
		new_reg_val = tps65180_current_Enable_Register = to_reg_val(cur_reg_val, fld_mask, fld_val);
		tps6518x_reg_write(REG_TPS65180_ENABLE, new_reg_val);

	}

	msleep(tps6518x->max_wait);

	return 0;
}

开发者ID:pocketbook，项目名称:801，代码行数:29，代码来源:tps6518x-regulator.c

示例3: max17135_vcom_set_voltage

static int max17135_vcom_set_voltage(struct regulator_dev *reg,
					int minuV, int uV, unsigned *selector)
{
	struct max17135 *max17135 = rdev_get_drvdata(reg);
	unsigned int reg_val;
	int vcom_read;

	if ((uV < vcom_data[max17135->pass_num-1].vcom_min_uV)
		|| (uV > vcom_data[max17135->pass_num-1].vcom_max_uV))
		return -EINVAL;

	max17135_reg_read(REG_MAX17135_DVR, &reg_val);

	/*
	 * Only program VCOM if it is not set to the desired value.
	 * Programming VCOM excessively degrades ability to keep
	 * DVR register value persistent.
	 */
	vcom_read = vcom_rs_to_uV(reg_val, max17135->pass_num-1);
	if (vcom_read != max17135->vcom_uV) {
		reg_val &= ~BITFMASK(DVR);
		reg_val |= BITFVAL(DVR, vcom_uV_to_rs(uV,
			max17135->pass_num-1));
		max17135_reg_write(REG_MAX17135_DVR, reg_val);

		reg_val = BITFVAL(CTRL_DVR, true); /* shift to correct bit */
		return max17135_reg_write(REG_MAX17135_PRGM_CTRL, reg_val);
	}

	return 0;
}

开发者ID:lixuhui112，项目名称:myimx6-linux，代码行数:31，代码来源:max17135-regulator.c

示例4: mc13892_bklit_set_blink_p

PMIC_STATUS mc13892_bklit_set_blink_p(enum lit_channel channel, int period)
{
	unsigned int mask;
	unsigned int value;
	int reg;

	switch (channel) {
	case LIT_RED:
		value = BITFVAL(BIT_BP_RED, period);
		mask = BITFMASK(BIT_BP_RED);
		reg = REG_LED_CTL2;
		break;
	case LIT_GREEN:
		value = BITFVAL(BIT_BP_GREEN, period);
		mask = BITFMASK(BIT_BP_GREEN);
		reg = REG_LED_CTL2;
		break;
	case LIT_BLUE:
		value = BITFVAL(BIT_BP_BLUE, period);
		mask = BITFMASK(BIT_BP_BLUE);
		reg = REG_LED_CTL3;
		break;
	default:
		return PMIC_PARAMETER_ERROR;
	}
	CHECK_ERROR(pmic_write_reg(reg, value, mask));
	return PMIC_SUCCESS;
}

开发者ID:YCsuperlife，项目名称:imx53_kernel，代码行数:28，代码来源:pmic_light.c

示例5: mxc_rtc_set_alarm

static int mxc_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
{
	unsigned int tod_reg_val = 0;
	unsigned int day_reg_val = 0;
	unsigned int mask, value;
	unsigned long time;

	if (rtc_valid_tm(&alrm->time))
		return -1;

	rtc_tm_to_time(&alrm->time, &time);

	tod_reg_val = time % 86400;
	day_reg_val = time / 86400;

	mask = BITFMASK(RTCALARM_TIME);
	value = BITFVAL(RTCALARM_TIME, tod_reg_val);
	CHECK_ERROR(pmic_write_reg(REG_RTC_ALARM, value, mask));

	mask = BITFMASK(RTCALARM_DAY);
	value = BITFVAL(RTCALARM_DAY, day_reg_val);
	CHECK_ERROR(pmic_write_reg(REG_RTC_DAY_ALARM, value, mask));

	return 0;
}

开发者ID:despierto，项目名称:imx_233_linux，代码行数:25，代码来源:rtc-mc13892.c

示例6: mc13892_bklit_set_hi_current

PMIC_STATUS mc13892_bklit_set_hi_current(enum lit_channel channel, int mode)
{
	unsigned int mask;
	unsigned int value;
	int reg;

	switch (channel) {
	case LIT_MAIN:
		value = BITFVAL(BIT_HC_MAIN, mode);
		mask = BITFMASK(BIT_HC_MAIN);
		reg = REG_LED_CTL0;
		break;
	case LIT_AUX:
		value = BITFVAL(BIT_HC_AUX, mode);
		mask = BITFMASK(BIT_HC_AUX);
		reg = REG_LED_CTL0;
		break;
	case LIT_KEY:
		value = BITFVAL(BIT_HC_KEY, mode);
		mask = BITFMASK(BIT_HC_KEY);
		reg = REG_LED_CTL1;
		break;
	default:
		return PMIC_PARAMETER_ERROR;
	}
	CHECK_ERROR(pmic_write_reg(reg, value, mask));
	return PMIC_SUCCESS;
}

开发者ID:YCsuperlife，项目名称:imx53_kernel，代码行数:28，代码来源:pmic_light.c

示例7: mc13892_gpo_disable

static int mc13892_gpo_disable(struct regulator *reg)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1;
	int gpo = reg->id;

	switch (gpo) {
	case MC13892_GPO1:
		register_val = BITFVAL(GPO1_EN, GPO1_EN_DISABLE);
		register_mask = BITFMASK(GPO1_EN);
		break;
	case MC13892_GPO2:
		register_val = BITFVAL(GPO2_EN, GPO2_EN_DISABLE);
		register_mask = BITFMASK(GPO2_EN);
		break;
	case MC13892_GPO3:
		register_val = BITFVAL(GPO3_EN, GPO3_EN_DISABLE);
		register_mask = BITFMASK(GPO3_EN);
		break;
	case MC13892_GPO4:
		register_val = BITFVAL(GPO4_EN, GPO4_EN_DISABLE);
		register_mask = BITFMASK(GPO4_EN);
		break;
	default:
		return -EINVAL;
	};

	register1 = REG_POWER_MISC;

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:31，代码来源:reg-mc13892.c

示例8: mxc_rtc_set_time

static int mxc_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
	unsigned int tod_reg_val = 0;
	unsigned int day_reg_val, day_reg_val2 = 0;
	unsigned int mask, value;
	unsigned long time;

	if (rtc_valid_tm(tm))
		return -1;

	rtc_tm_to_time(tm, &time);

	tod_reg_val = time % 86400;
	day_reg_val = time / 86400;

	do {
		mask = BITFMASK(RTC_DAY);
		value = BITFVAL(RTC_DAY, day_reg_val);
		CHECK_ERROR(pmic_write_reg(REG_RTC_DAY, value, mask));

		mask = BITFMASK(RTC_TIME);
		value = BITFVAL(RTC_TIME, tod_reg_val);
		CHECK_ERROR(pmic_write_reg(REG_RTC_TIME, value, mask));

		mask = BITFMASK(RTC_DAY);
		CHECK_ERROR(pmic_read_reg(REG_RTC_DAY, &value, mask));
		day_reg_val2 = BITFEXT(value, RTC_DAY);
	} while (day_reg_val != day_reg_val2);

	return 0;
}

开发者ID:despierto，项目名称:imx_233_linux，代码行数:31，代码来源:rtc-mc13892.c

示例9: mc13892_regulator_init

static int mc13892_regulator_init(struct mc13892 *mc13892)
{
	unsigned int value;
	pmic_event_callback_t power_key_event;
	int register_mask;

	pr_info("Initializing regulators for MX53 EVK \n");

	/* subscribe PWRON1 event to enable ON_OFF key */
	power_key_event.param = NULL;
	power_key_event.func = (void *)power_on_evt_handler;
	pmic_event_subscribe(EVENT_PWRONI, power_key_event);

	/* Bit 4 DRM: keep VSRTC and CLK32KMCU on for all states */
#if defined(CONFIG_RTC_DRV_MXC_V2) || defined(CONFIG_RTC_DRV_MXC_V2_MODULE)
	value = BITFVAL(DRM, 1);
	register_mask = BITFMASK(DRM);
	pmic_write_reg(REG_POWER_CTL0, value, register_mask);
#endif
	/* Set the STANDBYSECINV bit, so that STANDBY pin is
	 * interpreted as active low.
	 */
	value = BITFVAL(STANDBYSECINV, 1);
	register_mask = BITFMASK(STANDBYSECINV);
	pmic_write_reg(REG_POWER_CTL2, value, register_mask);

	/* Disable coin cell charger since the cell is not rechargeable */
	value = BITFVAL(COINCHEN, 0) | BITFVAL(VCOIN, VCOIN_3_0V);
	register_mask = BITFMASK(COINCHEN) | BITFMASK(VCOIN);
	pmic_write_reg(REG_POWER_CTL0, value, register_mask);

	mc13892_register_regulator(mc13892, MC13892_SW1, &sw1_init);
	mc13892_register_regulator(mc13892, MC13892_SW2, &sw2_init);
	mc13892_register_regulator(mc13892, MC13892_SW3, &sw3_init);
	mc13892_register_regulator(mc13892, MC13892_SW4, &sw4_init);
	mc13892_register_regulator(mc13892, MC13892_SWBST, &swbst_init);
	mc13892_register_regulator(mc13892, MC13892_VIOHI, &viohi_init);
	mc13892_register_regulator(mc13892, MC13892_VPLL, &vpll_init);
	mc13892_register_regulator(mc13892, MC13892_VDIG, &vdig_init);
	mc13892_register_regulator(mc13892, MC13892_VSD, &vsd_init);
	mc13892_register_regulator(mc13892, MC13892_VUSB2, &vusb2_init);
	mc13892_register_regulator(mc13892, MC13892_VVIDEO, &vvideo_init);
	mc13892_register_regulator(mc13892, MC13892_VAUDIO, &vaudio_init);
	mc13892_register_regulator(mc13892, MC13892_VCAM, &vcam_init);
	mc13892_register_regulator(mc13892, MC13892_VGEN1, &vgen1_init);
	mc13892_register_regulator(mc13892, MC13892_VGEN2, &vgen2_init);
	mc13892_register_regulator(mc13892, MC13892_VGEN3, &vgen3_init);
	mc13892_register_regulator(mc13892, MC13892_VUSB, &vusb_init);
	mc13892_register_regulator(mc13892, MC13892_GPO1, &gpo1_init);
	mc13892_register_regulator(mc13892, MC13892_GPO2, &gpo2_init);
	mc13892_register_regulator(mc13892, MC13892_GPO3, &gpo3_init);
	mc13892_register_regulator(mc13892, MC13892_GPO4, &gpo4_init);

	return 0;
}

开发者ID:fread-ink，项目名称:fread-kernel-k4，代码行数:55，代码来源:mx53_evk_pmic_mc13892.c

示例10: tps6518x_vcom_set_voltage

static int tps6518x_vcom_set_voltage(struct regulator_dev *reg,
									 int minuV, int uV)
{
	struct tps6518x *tps6518x = rdev_get_drvdata(reg);
	unsigned int cur_reg_val; /* current register value to modify */
	unsigned int new_reg_val; /* new register value to write */
	int retval;

	/*
	* this will not work on tps65182
	*/
	if (tps6518x->revID == 65182)
	{
		//printk("%s %s %d RETURN ERROR 65182! \n",__FILE__,__func__,__LINE__); 
		return 0;
	}
	///del,compare for patch:TPS6518x-unable-to-set-VCOM.patch
	if ((-uV) < 200000)
	{
		//printk("%s %s %d  too small return uV=%ld\n",__FILE__,__func__,__LINE__,uV); 
		return 0;
	}
	//printk(" tps vcom uV=%ld \n",uV); 

	switch (tps6518x->revID & 15)
	{
	case 0 : /* TPS65180 */
	case 1 : /* TPS65181 */
	case 4 : /* TPS65180-rev1 */
		tps6518x_reg_read(REG_TPS65180_VCOM_ADJUST,&cur_reg_val);
		new_reg_val = to_reg_val(cur_reg_val,
			BITFMASK(VCOM_SET),
			BITFVAL(VCOM_SET, vcom_uV_to_rs(uV)));

		retval = tps6518x_reg_write(REG_TPS65180_VCOM_ADJUST,
			new_reg_val);
		break;
	case 5 : /* TPS65185 */
	case 6 : /* TPS65186 */
		retval = tps6518x_reg_write(REG_TPS65185_VCOM1,
			vcom2_uV_to_rs(uV) & 255);
		tps6518x_reg_read( REG_TPS65185_VCOM2,&cur_reg_val);
		new_reg_val = to_reg_val(cur_reg_val,
			BITFMASK(VCOM2_SET),
			BITFVAL(VCOM2_SET, vcom2_uV_to_rs(uV)/256));

		retval = tps6518x_reg_write(REG_TPS65185_VCOM2,
			new_reg_val);
		break;
	default :
		retval = -1;
	}
	return retval;
}

开发者ID:pocketbook，项目名称:801，代码行数:54，代码来源:tps6518x-regulator.c

示例11: mc13892_vsd_set_voltage

static int mc13892_vsd_set_voltage(struct regulator *reg, int uV)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1;
	int voltage, mV = uV / 1000;

	if ((mV >= 1800) && (mV < 2000))
		voltage = VSD_1_8V;
	else if ((mV >= 2000) && (mV < 2600))
		voltage = VSD_2_0V;
	else if ((mV >= 2600) && (mV < 2700))
		voltage = VSD_2_6V;
	else if ((mV >= 2700) && (mV < 2800))
		voltage = VSD_2_7V;
	else if ((mV >= 2800) && (mV < 2900))
		voltage = VSD_2_8V;
	else if ((mV >= 2900) && (mV < 3000))
		voltage = VSD_2_9V;
	else if ((mV >= 3000) && (mV < 3150))
		voltage = VSD_3_0V;
	else
		voltage = VSD_3_15V;

	register_val = BITFVAL(VSD, voltage);
	register_mask = BITFMASK(VSD);
	register1 = REG_SETTING_1;

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:29，代码来源:reg-mc13892.c

示例12: max17135_vcom_enable

static int max17135_vcom_enable(struct regulator_dev *reg)
{
	struct max17135 *max17135 = rdev_get_drvdata(reg);

	/*
	 * Check to see if we need to set the VCOM voltage.
	 * Should only be done one time. And, we can
	 * only change vcom voltage if we have been enabled.
	 */
	if (!max17135->vcom_setup && max17135_is_power_good(max17135)) {
		max17135_vcom_set_voltage(reg,
			max17135->vcom_uV,
			max17135->vcom_uV,
			NULL);
		max17135->vcom_setup = true;
	}

	/* enable VCOM regulator output */
	if (max17135->pass_num == 1)
		gpio_set_value(max17135->gpio_pmic_vcom_ctrl, 1);
	else {
		unsigned int reg_val;

		max17135_reg_read(REG_MAX17135_ENABLE, &reg_val);
		reg_val &= ~BITFMASK(VCOM_ENABLE);
		reg_val |= BITFVAL(VCOM_ENABLE, 1); /* shift to correct bit */
		max17135_reg_write(REG_MAX17135_ENABLE, reg_val);
	}

	return 0;
}

开发者ID:lixuhui112，项目名称:myimx6-linux，代码行数:31，代码来源:max17135-regulator.c

示例13: mc13892_vgen2_set_voltage

static int mc13892_vgen2_set_voltage(struct regulator *reg, int uV)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1;
	int voltage, mV = uV / 1000;

	if ((mV >= 1200) && (mV < 1500))
		voltage = VGEN2_1_2V;
	else if ((mV >= 1500) && (mV < 1600))
		voltage = VGEN2_1_5V;
	else if ((mV >= 1600) && (mV < 1800))
		voltage = VGEN2_1_6V;
	else if ((mV >= 1800) && (mV < 2700))
		voltage = VGEN2_1_8V;
	else if ((mV >= 2700) && (mV < 2800))
		voltage = VGEN2_2_7V;
	else if ((mV >= 2800) && (mV < 2900))
		voltage = VGEN2_2_8V;
	else if ((mV >= 2900) && (mV < 3000))
		voltage = VGEN2_2_9V;
	else
		voltage = VGEN2_3_0V;

	register_val = BITFVAL(VGEN2, voltage);
	register_mask = BITFMASK(VGEN2);
	register1 = REG_SETTING_0;

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:29，代码来源:reg-mc13892.c

示例14: papyrus_vcom_enable

static int papyrus_vcom_enable(struct regulator_dev *reg)
{
	struct papyrus *papyrus = rdev_get_drvdata(reg);
	struct i2c_client *client;
	unsigned int reg_val;

	/*
	 * Check to see if we need to set the VCOM voltage.
	 * We can only change vcom voltage if we have been enabled.
	 * TEQ-1762 - Jack says we need to set VCOM on every power up
	 */
	if (gpio_get_value(papyrus->gpio_pmic_pwrgood)) {
		papyrus_vcom_set_voltage(reg,
			papyrus_vcom_cur_voltage,
			papyrus_vcom_cur_voltage);
		papyrus->vcom_setup = true;
	} 

	/* enable VCOM regulator output */
	client = papyrus->i2c_client;

	reg_val = i2c_smbus_read_byte_data(client, REG_PAPYRUS_ENABLE);
	reg_val &= ~BITFMASK(VCOM_ENABLE);
	reg_val |= BITFVAL(VCOM_ENABLE, 1); /* shift to correct bit */
	i2c_smbus_write_byte_data(client, REG_PAPYRUS_ENABLE, reg_val);
	return 0;
}

开发者ID:fread-ink，项目名称:fread-kernel-k4，代码行数:27，代码来源:papyrus-regulator-v2.c

示例15: pmic_batt_enable_charger

/*!
 * This function is used to start charging a battery. For different charger,
 * different voltage and current range are supported. \n
 *
 *
 * @param      chgr        Charger as defined in \b t_batt_charger.
 * @param      c_voltage   Charging voltage.
 * @param      c_current   Charging current.
 *
 * @return     This function returns PMIC_SUCCESS if successful.
 */
PMIC_STATUS pmic_batt_enable_charger(t_batt_charger chgr,
                                     unsigned char c_voltage,
                                     unsigned char c_current)
{
    unsigned int val, mask, reg;

    val = 0;
    mask = 0;
    reg = 0;

    if (suspend_flag == 1) {
        return PMIC_ERROR;
    }

    switch (chgr) {
    case BATT_MAIN_CHGR:
        val = BITFVAL(MC13783_BATT_DAC_DAC, c_current) |
              BITFVAL(MC13783_BATT_DAC_V_DAC, c_voltage);
        mask = BITFMASK(MC13783_BATT_DAC_DAC) |
               BITFMASK(MC13783_BATT_DAC_V_DAC);
        reg = REG_CHARGER;
        break;

    case BATT_CELL_CHGR:
        val = BITFVAL(MC13783_BATT_DAC_V_COIN, c_voltage) |
              BITFVAL(MC13783_BATT_DAC_COIN_CH_EN,
                      MC13783_BATT_DAC_COIN_CH_EN_ENABLED);
        mask = BITFMASK(MC13783_BATT_DAC_V_COIN) |
               BITFMASK(MC13783_BATT_DAC_COIN_CH_EN);
        reg = REG_POWER_CONTROL_0;
        break;

    case BATT_TRCKLE_CHGR:
        val = BITFVAL(MC13783_BATT_DAC_TRCKLE, c_current);
        mask = BITFMASK(MC13783_BATT_DAC_TRCKLE);
        reg = REG_CHARGER;
        break;

    default:
        return PMIC_PARAMETER_ERROR;
    }

    CHECK_ERROR(pmic_write_reg(reg, val, mask));

    return PMIC_SUCCESS;
}

开发者ID:Timesys，项目名称:linux-timesys，代码行数:57，代码来源:pmic_battery.c

示例16: pmic_batt_bp_enable_eol

/*!
 * This function enables End-of-Life comparator.
 *
 * @param      typical  Falling Edge Threshold threshold.
 * 			@verbatim
			BPDET	UVDET	LOBATL
			____	_____   ___________
			0	2.6	UVDET + 0.2
			1	2.6	UVDET + 0.3
			2	2.6	UVDET + 0.4
			3	2.6	UVDET + 0.5
 *
 * @return     This function returns PMIC_SUCCESS if successful.
 */
PMIC_STATUS pmic_batt_bp_enable_eol(t_bp_threshold typical)
{
	unsigned int val, mask;

	if (suspend_flag == 1)
		return PMIC_ERROR;

	val = BITFVAL(MC13783_BATT_DAC_EOL_CMP_EN,
		      MC13783_BATT_DAC_EOL_CMP_EN_ENABLE) |
	    BITFVAL(MC13783_BATT_DAC_EOL_SEL, typical);
	mask = BITFMASK(MC13783_BATT_DAC_EOL_CMP_EN) |
	    BITFMASK(MC13783_BATT_DAC_EOL_SEL);

	CHECK_ERROR(pmic_write_reg(REG_POWER_CONTROL_0, val, mask));

	return PMIC_SUCCESS;
}

开发者ID:despierto，项目名称:imx_233_linux，代码行数:31，代码来源:pmic_battery.c

示例17: pmic_rtc_set_time

/*!
 * This function set the real time clock of PMIC
 *
 * @param        pmic_time  	value of date and time
 *
 * @return       This function returns PMIC_SUCCESS if successful.
 */
PMIC_STATUS pmic_rtc_set_time(struct timeval *pmic_time)
{
	unsigned int tod_reg_val = 0;
	unsigned int day_reg_val = 0;
	unsigned int mask, value;

	tod_reg_val = pmic_time->tv_sec % 86400;
	day_reg_val = pmic_time->tv_sec / 86400;

	mask = BITFMASK(MC13783_RTCTIME_TIME);
	value = BITFVAL(MC13783_RTCTIME_TIME, tod_reg_val);
	CHECK_ERROR(pmic_write_reg(REG_RTC_TIME, value, mask));

	mask = BITFMASK(MC13783_RTCDAY_DAY);
	value = BITFVAL(MC13783_RTCDAY_DAY, day_reg_val);
	CHECK_ERROR(pmic_write_reg(REG_RTC_DAY, value, mask));

	return PMIC_SUCCESS;
}

开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:26，代码来源:pmic_rtc.c

示例18: mc13892_swbst_disable

static int mc13892_swbst_disable(struct regulator *reg)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1;

	register_val = BITFVAL(SWBST_EN, SWBST_EN_DISABLE);
	register_mask = BITFMASK(SWBST_EN);
	register1 = REG_SW_5;

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:11，代码来源:reg-mc13892.c

示例19: mc13892_vusb_disable

static int mc13892_vusb_disable(struct regulator *reg)
{
	unsigned int register_val = 0, register_mask = 0;
	unsigned int register1;

	register_val = BITFVAL(VUSB_EN, VUSB_EN_DISABLE);
	register_mask = BITFMASK(VUSB_EN);
	register1 = REG_USB1;

	return (pmic_write_reg(register1, register_val, register_mask));
}

开发者ID:R0-Developers，项目名称:YP-R0_Kernel，代码行数:11，代码来源:reg-mc13892.c

示例20: pmic_set_chg_current

static int pmic_set_chg_current(unsigned short curr)
{
	unsigned int mask;
	unsigned int value;

	value = BITFVAL(BIT_CHG_CURR, curr);
	mask = BITFMASK(BIT_CHG_CURR);
	CHECK_ERROR(pmic_write_reg(REG_CHARGE, value, mask));

	return 0;
}

开发者ID:pocketbook，项目名称:801，代码行数:11，代码来源:pmic_battery.c

注：本文中的BITFVAL函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BITMAP_ADDR16函数代码示例发布时间：2022-05-30

C++ BITFMASK函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19149|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9974|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8687|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8628|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ BITFVAL函数代码示例

示例1: mc13892_sw_dvs_set_voltage

示例2: tps6518x_display_disable

示例3: max17135_vcom_set_voltage

示例4: mc13892_bklit_set_blink_p

示例5: mxc_rtc_set_alarm

示例6: mc13892_bklit_set_hi_current

示例7: mc13892_gpo_disable

示例8: mxc_rtc_set_time

示例9: mc13892_regulator_init

示例10: tps6518x_vcom_set_voltage

示例11: mc13892_vsd_set_voltage

示例12: max17135_vcom_enable

示例13: mc13892_vgen2_set_voltage

示例14: papyrus_vcom_enable

示例15: pmic_batt_enable_charger

示例16: pmic_batt_bp_enable_eol

示例17: pmic_rtc_set_time

示例18: mc13892_swbst_disable

示例19: mc13892_vusb_disable

示例20: pmic_set_chg_current

请发表评论

全部评论

上一篇：

下一篇：

MikeMcQuaid/strap:

headcr4sh/node-maven: Maven for Node.js

CVE-2022-26527

traex/RippleEffect: Implementation of Ri

csimmonds/procrank_linux: procrank from

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053