本文整理汇总了C++中BIO_write_filename函数的典型用法代码示例。如果您正苦于以下问题：C++ BIO_write_filename函数的具体用法？C++ BIO_write_filename怎么用？C++ BIO_write_filename使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了BIO_write_filename函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: MAIN
//.........这里部分代码省略.........
BIO_printf(bio_out, "%08lx\n",
X509_NAME_hash(X509_CRL_get_issuer(x)));
}
#ifndef OPENSSL_NO_MD5
if (hash_old == i) {
BIO_printf(bio_out, "%08lx\n",
X509_NAME_hash_old(X509_CRL_get_issuer(x)));
}
#endif
if (lastupdate == i) {
BIO_printf(bio_out, "lastUpdate=");
ASN1_TIME_print(bio_out, X509_CRL_get_lastUpdate(x));
BIO_printf(bio_out, "\n");
}
if (nextupdate == i) {
BIO_printf(bio_out, "nextUpdate=");
if (X509_CRL_get_nextUpdate(x))
ASN1_TIME_print(bio_out, X509_CRL_get_nextUpdate(x));
else
BIO_printf(bio_out, "NONE");
BIO_printf(bio_out, "\n");
}
if (fingerprint == i) {
int j;
unsigned int n;
unsigned char md[EVP_MAX_MD_SIZE];
if (!X509_CRL_digest(x, digest, md, &n)) {
BIO_printf(bio_err, "out of memory\n");
goto end;
}
BIO_printf(bio_out, "%s Fingerprint=",
OBJ_nid2sn(EVP_MD_type(digest)));
for (j = 0; j < (int)n; j++) {
BIO_printf(bio_out, "%02X%c", md[j], (j + 1 == (int)n)
? '\n' : ':');
}
}
}
}
out = BIO_new(BIO_s_file());
if (out == NULL) {
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto end;
}
}
if (text)
X509_CRL_print(out, x);
if (noout) {
ret = 0;
goto end;
}
if (badsig)
x->signature->data[x->signature->length - 1] ^= 0x1;
if (outformat == FORMAT_ASN1)
i = (int)i2d_X509_CRL_bio(out, x);
else if (outformat == FORMAT_PEM)
i = PEM_write_bio_X509_CRL(out, x);
else {
BIO_printf(bio_err, "bad output format specified for outfile\n");
goto end;
}
if (!i) {
BIO_printf(bio_err, "unable to write CRL\n");
goto end;
}
ret = 0;
end:
if (ret != 0)
ERR_print_errors(bio_err);
BIO_free_all(out);
BIO_free_all(bio_out);
bio_out = NULL;
X509_CRL_free(x);
if (store) {
X509_STORE_CTX_cleanup(&ctx);
X509_STORE_free(store);
}
apps_shutdown();
OPENSSL_EXIT(ret);
}
开发者ID:johnjohnsp1，项目名称:opensgx，代码行数:101，代码来源:crl.c
示例2: MAIN
//.........这里部分代码省略.........
if (x == NULL)
goto end;
if (CA_flag)
{
xca = load_cert (bio_err, CAfile, CAformat, NULL, e, "CA Certificate");
if (xca == NULL)
goto end;
}
if (!noout || text || next_serial)
{
OBJ_create ("2.99999.3", "SET.ex3", "SET x509v3 extension 3");
out = BIO_new (BIO_s_file ());
if (out == NULL)
{
ERR_print_errors (bio_err);
goto end;
}
if (outfile == NULL)
{
BIO_set_fp (out, stdout, BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new (BIO_f_linebuffer ());
out = BIO_push (tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename (out, outfile) <= 0)
{
perror (outfile);
goto end;
}
}
}
if (alias)
X509_alias_set1 (x, (unsigned char *) alias, -1);
if (clrtrust)
X509_trust_clear (x);
if (clrreject)
X509_reject_clear (x);
if (trust)
{
for (i = 0; i < sk_ASN1_OBJECT_num (trust); i++)
{
objtmp = sk_ASN1_OBJECT_value (trust, i);
X509_add1_trust_object (x, objtmp);
}
}
if (reject)
{
for (i = 0; i < sk_ASN1_OBJECT_num (reject); i++)
{
objtmp = sk_ASN1_OBJECT_value (reject, i);
X509_add1_reject_object (x, objtmp);
}
}
开发者ID:274914765，项目名称:C，代码行数:67，代码来源:x509.c
示例3: MAIN
//.........这里部分代码省略.........
goto end;
}
}
BIO_printf(bio_err, "read EC key\n");
if (informat == FORMAT_ASN1) {
if (pubin)
eckey = d2i_EC_PUBKEY_bio(in, NULL);
else
eckey = d2i_ECPrivateKey_bio(in, NULL);
} else if (informat == FORMAT_PEM) {
if (pubin)
eckey = PEM_read_bio_EC_PUBKEY(in, NULL, NULL, NULL);
else
eckey = PEM_read_bio_ECPrivateKey(in, NULL, NULL, passin);
} else {
BIO_printf(bio_err, "bad input format specified for key\n");
goto end;
}
if (eckey == NULL) {
BIO_printf(bio_err, "unable to load Key\n");
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
# ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
# endif
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto end;
}
}
group = EC_KEY_get0_group(eckey);
if (new_form)
EC_KEY_set_conv_form(eckey, form);
if (new_asn1_flag)
EC_KEY_set_asn1_flag(eckey, asn1_flag);
if (text)
if (!EC_KEY_print(out, eckey, 0)) {
perror(outfile);
ERR_print_errors(bio_err);
goto end;
}
if (noout) {
ret = 0;
goto end;
}
BIO_printf(bio_err, "writing EC key\n");
if (outformat == FORMAT_ASN1) {
if (param_out)
i = i2d_ECPKParameters_bio(out, group);
else if (pubin || pubout)
i = i2d_EC_PUBKEY_bio(out, eckey);
else
i = i2d_ECPrivateKey_bio(out, eckey);
} else if (outformat == FORMAT_PEM) {
if (param_out)
i = PEM_write_bio_ECPKParameters(out, group);
else if (pubin || pubout)
i = PEM_write_bio_EC_PUBKEY(out, eckey);
else
i = PEM_write_bio_ECPrivateKey(out, eckey, enc,
NULL, 0, NULL, passout);
} else {
BIO_printf(bio_err, "bad output format specified for " "outfile\n");
goto end;
}
if (!i) {
BIO_printf(bio_err, "unable to write private key\n");
ERR_print_errors(bio_err);
} else
ret = 0;
end:
if (in)
BIO_free(in);
if (out)
BIO_free_all(out);
if (eckey)
EC_KEY_free(eckey);
if (passin)
OPENSSL_free(passin);
if (passout)
OPENSSL_free(passout);
apps_shutdown();
OPENSSL_EXIT(ret);
}
开发者ID:GrayKing，项目名称:Leakfix-on-OpenSSL，代码行数:101，代码来源:ec.c
示例4: MAIN
//.........这里部分代码省略.........
" -f4 use F4 (0x10001) for the E value\n");
BIO_printf(bio_err, " -3 use 3 for the E value\n");
# ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err,
" -engine e use engine e, possibly a hardware device.\n");
# endif
BIO_printf(bio_err, " -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR,
LIST_SEPARATOR_CHAR);
BIO_printf(bio_err,
" load the file (or the files in the directory) into\n");
BIO_printf(bio_err, " the random number generator\n");
goto err;
}
ERR_load_crypto_strings();
if (!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
BIO_printf(bio_err, "Error getting password\n");
goto err;
}
# ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine, 0);
# endif
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
# ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
# endif
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto err;
}
}
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL
&& !RAND_status()) {
BIO_printf(bio_err,
"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL)
BIO_printf(bio_err, "%ld semi-random bytes loaded\n",
app_RAND_load_files(inrand));
BIO_printf(bio_err, "Generating RSA private key, %d bit long modulus\n",
num);
# ifdef OPENSSL_NO_ENGINE
rsa = RSA_new();
# else
rsa = RSA_new_method(e);
# endif
if (!rsa)
goto err;
if (!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
goto err;
app_RAND_write_file(NULL, bio_err);
/*
* We need to do the following for when the base number size is < long,
* esp windows 3.1 :-(.
开发者ID:bbidd985，项目名称:IEEE_Taggant_System，代码行数:67，代码来源:genrsa.c
示例5: MAIN
//.........这里部分代码省略.........
ERR_load_crypto_strings();
in=BIO_new(BIO_s_file());
out=BIO_new(BIO_s_file());
if ((in == NULL) || (out == NULL))
{
ERR_print_errors(bio_err);
goto end;
}
if (infile == NULL)
BIO_set_fp(in,OPENSSL_TYPE__FILE_STDIN,BIO_NOCLOSE);
else
{
if (BIO_read_filename(in,infile) <= 0)
{
TINYCLR_SSL_PERROR(infile);
goto end;
}
}
if (outfile == NULL)
{
BIO_set_fp(out,OPENSSL_TYPE__FILE_STDOUT,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
TINYCLR_SSL_PERROR(outfile);
goto end;
}
}
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine, 0);
#endif
if (list_curves)
{
EC_builtin_curve *curves = NULL;
size_t crv_len = 0;
size_t n = 0;
crv_len = EC_get_builtin_curves(NULL, 0);
curves = (EC_builtin_curve*)OPENSSL_malloc((int)(sizeof(EC_builtin_curve) * crv_len));
if (curves == NULL)
goto end;
if (!EC_get_builtin_curves(curves, crv_len))
{
OPENSSL_free(curves);
goto end;
}
for (n = 0; n < crv_len; n++)
{
开发者ID:Wampamba-Nooh，项目名称:MicroFrameworkSDK-Mono，代码行数:67，代码来源:ecparam.cpp
示例6: MAIN
//.........这里部分代码省略.........
e = setup_engine(bio_err, engine, 0);
#endif
in=BIO_new(BIO_s_file());
out=BIO_new(BIO_s_file());
if ((in == NULL) || (out == NULL))
{
ERR_print_errors(bio_err);
goto end;
}
if (infile == NULL)
BIO_set_fp(in,OPENSSL_TYPE__FILE_STDIN,BIO_NOCLOSE);
else
{
if (BIO_read_filename(in,infile) <= 0)
{
TINYCLR_SSL_PERROR(infile);
goto end;
}
}
if (outfile == NULL)
{
BIO_set_fp(out,OPENSSL_TYPE__FILE_STDOUT,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
TINYCLR_SSL_PERROR(outfile);
goto end;
}
}
if (informat == FORMAT_ASN1)
dh=d2i_DHparams_bio(in,NULL);
else if (informat == FORMAT_PEM)
dh=PEM_read_bio_DHparams(in,NULL,NULL,NULL);
else
{
BIO_printf(bio_err,"bad input format specified\n");
goto end;
}
if (dh == NULL)
{
BIO_printf(bio_err,"unable to load DH parameters\n");
ERR_print_errors(bio_err);
goto end;
}
if (text)
{
DHparams_print(out,dh);
#ifdef undef
TINYCLR_SSL_PRINTF("p=");
BN_print(OPENSSL_TYPE__FILE_STDOUT,dh->p);
TINYCLR_SSL_PRINTF("\ng=");
BN_print(OPENSSL_TYPE__FILE_STDOUT,dh->g);
开发者ID:Wampamba-Nooh，项目名称:MicroFrameworkSDK-Mono，代码行数:67，代码来源:dh.cpp
示例7: MAIN
//.........这里部分代码省略.........
dh=d2i_DHparams_bio(in,NULL);
else /* informat == FORMAT_PEM */
dh=PEM_read_bio_DHparams(in,NULL,NULL,NULL);
if (dh == NULL)
{
BIO_printf(bio_err,"unable to load DH parameters\n");
ERR_print_errors(bio_err);
goto end;
}
}
/* dh != NULL */
}
out=BIO_new(BIO_s_file());
if (out == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL)
{
BIO_set_fp(out,stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
perror(outfile);
goto end;
}
}
if (text)
{
DHparams_print(out,dh);
}
if (check)
{
if (!DH_check(dh,&i))
{
ERR_print_errors(bio_err);
goto end;
}
if (i & DH_CHECK_P_NOT_PRIME)
printf("p value is not prime\n");
if (i & DH_CHECK_P_NOT_SAFE_PRIME)
printf("p value is not a safe prime\n");
if (i & DH_UNABLE_TO_CHECK_GENERATOR)
printf("unable to check the generator value\n");
if (i & DH_NOT_SUITABLE_GENERATOR)
printf("the g value is not a generator\n");
if (i == 0)
printf("DH parameters appear to be ok.\n");
}
if (C)
{
开发者ID:aleeehaider825，项目名称:hachi-roku，代码行数:67，代码来源:dhparam.c
示例8: main
int main(int argc, char *argv[])
{
BN_CTX *ctx;
BIO *out;
char *outfile=NULL;
results = 0;
RAND_seed(rnd_seed, sizeof rnd_seed); /* or BN_generate_prime may fail */
argc--;
argv++;
while (argc >= 1)
{
if (strcmp(*argv,"-results") == 0)
results=1;
else if (strcmp(*argv,"-out") == 0)
{
if (--argc < 1) break;
outfile= *(++argv);
}
argc--;
argv++;
}
ctx=BN_CTX_new();
if (ctx == NULL) EXIT(1);
out=BIO_new(BIO_s_file());
if (out == NULL) EXIT(1);
if (outfile == NULL)
{
BIO_set_fp(out,stdout,BIO_NOCLOSE);
}
else
{
if (!BIO_write_filename(out,outfile))
{
perror(outfile);
EXIT(1);
}
}
if (!results)
BIO_puts(out,"obase=16\nibase=16\n");
message(out,"BN_add");
if (!test_add(out)) goto err;
BIO_flush(out);
message(out,"BN_sub");
if (!test_sub(out)) goto err;
BIO_flush(out);
message(out,"BN_lshift1");
if (!test_lshift1(out)) goto err;
BIO_flush(out);
message(out,"BN_lshift (fixed)");
if (!test_lshift(out,ctx,BN_bin2bn(lst,sizeof(lst)-1,NULL)))
goto err;
BIO_flush(out);
message(out,"BN_lshift");
if (!test_lshift(out,ctx,NULL)) goto err;
BIO_flush(out);
message(out,"BN_rshift1");
if (!test_rshift1(out)) goto err;
BIO_flush(out);
message(out,"BN_rshift");
if (!test_rshift(out,ctx)) goto err;
BIO_flush(out);
message(out,"BN_sqr");
if (!test_sqr(out,ctx)) goto err;
BIO_flush(out);
message(out,"BN_mul");
if (!test_mul(out)) goto err;
BIO_flush(out);
message(out,"BN_div");
if (!test_div(out,ctx)) goto err;
BIO_flush(out);
message(out,"BN_div_recp");
if (!test_div_recp(out,ctx)) goto err;
BIO_flush(out);
message(out,"BN_mod");
if (!test_mod(out,ctx)) goto err;
BIO_flush(out);
message(out,"BN_mod_mul");
if (!test_mod_mul(out,ctx)) goto err;
BIO_flush(out);
//.........这里部分代码省略.........
开发者ID:froggatt，项目名称:edimax-br-6528n，代码行数:101，代码来源:bntest.c
示例9: MAIN
//.........这里部分代码省略.........
if (infile == NULL)
BIO_set_fp(in,OPENSSL_TYPE__FILE_STDIN,BIO_NOCLOSE);
else
{
if (BIO_read_filename(in,infile) <= 0)
{
TINYCLR_SSL_PERROR(infile);
goto end;
}
}
if (informat == FORMAT_ASN1)
crl=d2i_X509_CRL_bio(in,NULL);
else if (informat == FORMAT_PEM)
crl=PEM_read_bio_X509_CRL(in,NULL,NULL,NULL);
else {
BIO_printf(bio_err,"bad input format specified for input crl\n");
goto end;
}
if (crl == NULL)
{
BIO_printf(bio_err,"unable to load CRL\n");
ERR_print_errors(bio_err);
goto end;
}
}
if ((p7=PKCS7_new()) == NULL) goto end;
if ((p7s=PKCS7_SIGNED_new()) == NULL) goto end;
p7->type=OBJ_nid2obj(NID_pkcs7_signed);
p7->d.sign=p7s;
p7s->contents->type=OBJ_nid2obj(NID_pkcs7_data);
if (!ASN1_INTEGER_set(p7s->version,1)) goto end;
if ((crl_stack=sk_X509_CRL_new_null()) == NULL) goto end;
p7s->crl=crl_stack;
if (crl != NULL)
{
sk_X509_CRL_push(crl_stack,crl);
crl=NULL; /* now part of p7 for OPENSSL_freeing */
}
if ((cert_stack=sk_X509_new_null()) == NULL) goto end;
p7s->cert=cert_stack;
if(certflst) for(i = 0; i < sk_OPENSSL_STRING_num(certflst); i++) {
certfile = sk_OPENSSL_STRING_value(certflst, i);
if (add_certs_from_file(cert_stack,certfile) < 0)
{
BIO_printf(bio_err, "error loading certificates\n");
ERR_print_errors(bio_err);
goto end;
}
}
sk_OPENSSL_STRING_free(certflst);
if (outfile == NULL)
{
BIO_set_fp(out,OPENSSL_TYPE__FILE_STDOUT,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
TINYCLR_SSL_PERROR(outfile);
goto end;
}
}
if (outformat == FORMAT_ASN1)
i=i2d_PKCS7_bio(out,p7);
else if (outformat == FORMAT_PEM)
i=PEM_write_bio_PKCS7(out,p7);
else {
BIO_printf(bio_err,"bad output format specified for outfile\n");
goto end;
}
if (!i)
{
BIO_printf(bio_err,"unable to write pkcs7 object\n");
ERR_print_errors(bio_err);
goto end;
}
ret=0;
end:
if (in != NULL) BIO_free(in);
if (out != NULL) BIO_free_all(out);
if (p7 != NULL) PKCS7_free(p7);
if (crl != NULL) X509_CRL_free(crl);
apps_shutdown();
OPENSSL_EXIT(ret);
}
开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:101，代码来源:crl2p7.cpp
示例10: main
//.........这里部分代码省略.........
print_hex_data(f, signature);
fclose(f);
}
} else if (!strcmp(argv[1], "-convkey")) {
if (argc < 6) {
usage();
exit(1);
}
if (strcmp(argv[2], "b2o") == 0) {
b2o = true;
} else if (strcmp(argv[2], "o2b") == 0) {
b2o = false;
} else {
die("either 'o2b' or 'b2o' must be defined for -convkey\n");
}
if (strcmp(argv[3], "pub") == 0) {
kpriv = false;
} else if (strcmp(argv[3], "priv") == 0) {
kpriv = true;
} else {
die("either 'pub' or 'priv' must be defined for -convkey\n");
}
OpenSSL_add_all_algorithms();
ERR_load_crypto_strings();
ENGINE_load_builtin_engines();
if (bio_err == NULL) {
bio_err = BIO_new_fp(stdout, BIO_NOCLOSE);
}
//enc=EVP_get_cipherbyname("des");
//if (enc == NULL)
// die("could not get cypher.\n");
// no encription yet.
bio_out=BIO_new(BIO_s_file());
if (BIO_write_filename(bio_out,argv[5]) <= 0) {
perror(argv[5]);
die("could not create output file.\n");
}
if (b2o) {
rsa_key_ = RSA_new();
if (kpriv) {
fpriv = fopen(argv[4], "r");
if (!fpriv) {
die("fopen");
}
scan_key_hex(fpriv, (KEY*)&private_key, sizeof(private_key));
fclose(fpriv);
private_to_openssl(private_key, &rsa_key);
//i = PEM_write_bio_RSAPrivateKey(bio_out, &rsa_key,
// enc, NULL, 0, pass_cb, NULL);
// no encryption yet.
//i = PEM_write_bio_RSAPrivateKey(bio_out, &rsa_key,
// NULL, NULL, 0, pass_cb, NULL);
fpriv = fopen(argv[5], "w+");
PEM_write_RSAPrivateKey(fpriv, &rsa_key, NULL, NULL, 0, 0, NULL);
fclose(fpriv);
//if (i == 0) {
// ERR_print_errors(bio_err);
// die("could not write key file.\n");
//}
} else {
fpub = fopen(argv[4], "r");
if (!fpub) {
die("fopen");
}
开发者ID:keyz182，项目名称:BOINC-7.0，代码行数:67，代码来源:crypt_prog.cpp
示例11: enc_main
//.........这里部分代码省略.........
int retval;
retval = snprintf(buf, sizeof buf,
"enter %s %s password:",
OBJ_nid2ln(EVP_CIPHER_nid(enc_config.cipher)),
enc_config.enc ? "encryption" : "decryption");
if ((size_t)retval >= sizeof buf) {
BIO_printf(bio_err,
"Password prompt too long\n");
goto end;
}
strbuf[0] = '\0';
i = EVP_read_pw_string((char *)strbuf, SIZE, buf,
enc_config.enc);
if (i == 0) {
if (strbuf[0] == '\0') {
ret = 1;
goto end;
}
enc_config.keystr = strbuf;
break;
}
if (i < 0) {
BIO_printf(bio_err, "bad password read\n");
goto end;
}
}
}
if (enc_config.outf == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
if (enc_config.bufsize != NULL)
setvbuf(stdout, (char *)NULL, _IONBF, 0);
} else {
if (BIO_write_filename(out, enc_config.outf) <= 0) {
perror(enc_config.outf);
goto end;
}
}
rbio = in;
wbio = out;
#ifdef ZLIB
if (do_zlib) {
if ((bzl = BIO_new(BIO_f_zlib())) == NULL)
goto end;
if (enc)
wbio = BIO_push(bzl, wbio);
else
rbio = BIO_push(bzl, rbio);
}
#endif
if (enc_config.base64) {
if ((b64 = BIO_new(BIO_f_base64())) == NULL)
goto end;
if (enc_config.debug) {
BIO_set_callback(b64, BIO_debug_callback);
BIO_set_callback_arg(b64, (char *) bio_err);
}
if (enc_config.olb64)
BIO_set_flags(b64, BIO_FLAGS_BASE64_NO_NL);
if (enc_config.enc)
wbio = BIO_push(b64, wbio);
else
rbio = BIO_push(b64, rbio);
开发者ID:LucaBongiorni，项目名称:nextgen，代码行数:67，代码来源:enc.c
示例12: genrsa_main
//.........这里部分代码省略.........
else if (strcmp(*argv, "-aes256") == 0)
enc = EVP_aes_256_cbc();
#endif
#ifndef OPENSSL_NO_CAMELLIA
else if (strcmp(*argv, "-camellia128") == 0)
enc = EVP_camellia_128_cbc();
else if (strcmp(*argv, "-camellia192") == 0)
enc = EVP_camellia_192_cbc();
else if (strcmp(*argv, "-camellia256") == 0)
enc = EVP_camellia_256_cbc();
#endif
else if (strcmp(*argv, "-passout") == 0) {
if (--argc < 1)
goto bad;
passargout = *(++argv);
} else
break;
argv++;
argc--;
}
if ((argc >= 1) && ((sscanf(*argv, "%d", &num) == 0) || (num < 0))) {
bad:
BIO_printf(bio_err, "usage: genrsa [args] [numbits]\n");
BIO_printf(bio_err, " -des encrypt the generated key with DES in cbc mode\n");
BIO_printf(bio_err, " -des3 encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
#ifndef OPENSSL_NO_IDEA
BIO_printf(bio_err, " -idea encrypt the generated key with IDEA in cbc mode\n");
#endif
#ifndef OPENSSL_NO_AES
BIO_printf(bio_err, " -aes128, -aes192, -aes256\n");
BIO_printf(bio_err, " encrypt PEM output with cbc aes\n");
#endif
#ifndef OPENSSL_NO_CAMELLIA
BIO_printf(bio_err, " -camellia128, -camellia192, -camellia256\n");
BIO_printf(bio_err, " encrypt PEM output with cbc camellia\n");
#endif
BIO_printf(bio_err, " -out file output the key to 'file\n");
BIO_printf(bio_err, " -passout arg output file pass phrase source\n");
BIO_printf(bio_err, " -f4 use F4 (0x10001) for the E value\n");
BIO_printf(bio_err, " -3 use 3 for the E value\n");
goto err;
}
if (!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
BIO_printf(bio_err, "Error getting password\n");
goto err;
}
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto err;
}
}
BIO_printf(bio_err, "Generating RSA private key, %d bit long modulus\n",
num);
rsa = RSA_new();
if (!rsa)
goto err;
if (!BN_set_word(bn, f4) || !RSA_generate_key_ex(rsa, num, bn, &cb))
goto err;
/*
* We need to do the following for when the base number size is <
* long, esp windows 3.1 :-(.
*/
l = 0L;
for (i = 0; i < rsa->e->top; i++) {
#ifndef _LP64
l <<= BN_BITS4;
l <<= BN_BITS4;
#endif
l += rsa->e->d[i];
}
BIO_printf(bio_err, "e is %ld (0x%lX)\n", l, l);
{
PW_CB_DATA cb_data;
cb_data.password = passout;
cb_data.prompt_info = outfile;
if (!PEM_write_bio_RSAPrivateKey(out, rsa, enc, NULL, 0,
password_callback, &cb_data))
goto err;
}
ret = 0;
err:
BN_free(bn);
RSA_free(rsa);
BIO_free_all(out);
free(passout);
if (ret != 0)
ERR_print_errors(bio_err);
return (ret);
}
开发者ID:bbbrumley，项目名称:openbsd，代码行数:101，代码来源:genrsa.c
示例13: MAIN
//.........这里部分代码省略.........
TINYCLR_SSL_PERROR(infile);
goto end;
}
}
if (informat == FORMAT_ASN1)
p7=d2i_PKCS7_bio(in,NULL);
else if (informat == FORMAT_PEM)
p7=PEM_read_bio_PKCS7(in,NULL,NULL,NULL);
else
{
BIO_printf(bio_err,"bad input format specified for pkcs7 object\n");
goto end;
}
if (p7 == NULL)
{
BIO_printf(bio_err,"unable to load PKCS7 object\n");
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL)
{
BIO_set_fp(out,OPENSSL_TYPE__FILE_STDOUT,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
TINYCLR_SSL_PERROR(outfile);
goto end;
}
}
if (p7_print)
PKCS7_print_ctx(out, p7, 0, NULL);
if (print_certs)
{
STACK_OF(X509) *certs=NULL;
STACK_OF(X509_CRL) *crls=NULL;
i=OBJ_obj2nid(p7->type);
switch (i)
{
case NID_pkcs7_signed:
certs=p7->d.sign->cert;
crls=p7->d.sign->crl;
break;
case NID_pkcs7_signedAndEnveloped:
certs=p7->d.signed_and_enveloped->cert;
crls=p7->d.signed_and_enveloped->crl;
break;
default:
break;
}
if (certs != NULL)
{
X509 *x;
开发者ID:EddieGarmon，项目名称:netduino-netmf，代码行数:67，代码来源:pkcs7.cpp
示例14: strcpy
static ASN1_INTEGER *load_serial(char *CAfile, char *serialfile, int create)
{
char *buf = NULL, *p;
MS_STATIC char buf2[1024];
ASN1_INTEGER *bs = NULL, *bs2 = NULL;
BIO *io = NULL;
BIGNUM *serial = NULL;
buf=OPENSSL_malloc( ((serialfile == NULL)
?(strlen(CAfile)+strlen(POSTFIX)+1)
:(strlen(serialfile)))+1);
if (buf == NULL) { BIO_printf(bio_err,"out of mem\n"); goto end; }
if (serialfile == NULL)
{
strcpy(buf,CAfile);
for (p=buf; *p; p++)
if (*p == '.')
{
*p='\0';
break;
}
strcat(buf,POSTFIX);
}
else
strcpy(buf,serialfile);
serial=BN_new();
bs=ASN1_INTEGER_new();
if ((serial == NULL) || (bs == NULL))
{
ERR_print_errors(bio_err);
goto end;
}
io=BIO_new(BIO_s_file());
if (io == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
if (BIO_read_filename(io,buf) <= 0)
{
if (!create)
{
perror(buf);
goto end;
}
else
{
ASN1_INTEGER_set(bs,1);
BN_one(serial);
}
}
else
{
if (!a2i_ASN1_INTEGER(io,bs,buf2,sizeof buf2))
{
BIO_printf(bio_err,"unable to load serial number from %s\n",buf);
ERR_print_errors(bio_err);
goto end;
}
else
{
serial=BN_bin2bn(bs->data,bs->length,serial);
if (serial == NULL)
{
BIO_printf(bio_err,"error converting bin 2 bn");
goto end;
}
}
}
if (!BN_add_word(serial,1))
{ BIO_printf(bio_err,"add_word failure\n"); goto end; }
if (!(bs2 = BN_to_ASN1_INTEGER(serial, NULL)))
{ BIO_printf(bio_err,"error converting bn 2 asn1_integer\n"); goto end; }
if (BIO_write_filename(io,buf) <= 0)
{
BIO_printf(bio_err,"error attempting to write serial number file\n");
perror(buf);
goto end;
}
i2a_ASN1_INTEGER(io,bs2);
BIO_puts(io,"\n");
BIO_free(io);
if (buf) OPENSSL_free(buf);
ASN1_INTEGER_free(bs2);
BN_free(serial);
io=NULL;
return bs;
end:
if (buf) OPENSSL_free(buf);
BIO_free(io);
ASN1_INTEGER_free(bs);
BN_free(serial);
return NULL;
}
开发者ID:xyzy，项目名称:mips-openssl_0.9.7，代码行数:100，代码来源:x509.c
示例15: gendh_main
int
gendh_main(int argc, char **argv)
{
BN_GENCB cb;
DH *dh = NULL;
int ret = 1, num = DEFBITS;
int g = 2;
char *outfile = NULL;
#ifndef OPENSSL_NO_ENGINE
char *engine = NULL;
#endif
BIO *out = NULL;
BN_GENCB_set(&cb, dh_cb, bio_err);
argv++;
argc--;
for (;;) {
if (argc <= 0)
break;
if (strcmp(*argv, "-out") == 0) {
if (--argc < 1)
goto bad;
outfile = *(++argv);
} else if (strcmp(*argv, "-2") == 0)
g = 2;
/*
* else if (strcmp(*argv,"-3") == 0) g=3;
*/
else if (strcmp(*argv, "-5") == 0)
g = 5;
#ifndef OPENSSL_NO_ENGINE
else if (strcmp(*argv, "-engine") == 0) {
if (--argc < 1)
goto bad;
engine = *(++argv);
}
#endif
else
break;
argv++;
argc--;
}
if ((argc >= 1) && ((sscanf(*argv, "%d", &num) == 0) || (num < 0))) {
bad:
BIO_printf(bio_err, "usage: gendh [args] [numbits]\n");
BIO_printf(bio_err, " -out file - output the key to 'file\n");
BIO_printf(bio_err, " -2 - use 2 as the generator value\n");
/*
* BIO_printf(bio_err," -3 - use 3 as the generator
* value\n");
*/
BIO_printf(bio_err, " -5 - use 5 as the generator value\n");
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err, " -engine e - use engine e, possibly a hardware device.\n");
#endif
goto end;
}
#ifndef OPENSSL_NO_ENGINE
setup_engine(bio_err, engine, 0);
#endif
out = BIO_new(BIO_s_file());
if (out == NULL) {
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto end;
}
}
BIO_printf(bio_err, "Generating DH parameters, %d bit long safe prime, generator %d\n", num, g);
BIO_printf(bio_err, "This is going to take a long time\n");
if (((dh = DH_new()) == NULL) || !DH_generate_parameters_ex(dh, num, g, &cb))
goto end;
if (!PEM_write_bio_DHparams(out, dh))
goto end;
ret = 0;
end:
if (ret != 0)
ERR_print_errors(bio_err);
if (out != NULL)
BIO_free_all(out);
if (dh != NULL)
DH_free(dh);
return (ret);
}
开发者ID:LeSuisse，项目名称:libressl-salsa20，代码行数:95，代码来源:gendh.c
示例16: rand_main
int
rand_main(int argc, char **argv)
{
char *num_bytes = NULL;
int ret = 1;
int badopt = 0;
int num = -1;
int i, r;
BIO *out = NULL;
memset(&rand_config, 0, sizeof(rand_config));
if (options_parse(argc, argv, rand_options, &num_bytes, NULL) != 0) {
rand_usage();
return (1);
}
if (num_bytes != NULL) {
r = sscanf(num_bytes, "%d", &num);
if (r == 0 || num < 0)
badopt = 1;
} else
badopt = 1;
if (rand_config.hex && rand_config.base64)
badopt = 1;
if (badopt) {
rand_usage();
goto err;
}
#ifndef OPENSSL_NO_ENGINE
setup_engine(bio_err, rand_config.engine, 0);
#endif
out = BIO_new(BIO_s_file());
if (out == NULL)
goto err;
if (rand_config.outfile != NULL)
r = BIO_write_filename(out, rand_config.outfile);
else
r = BIO_set_fp(out, stdout, BIO_NOCLOSE | BIO_FP_TEXT);
if (r <= 0)
goto err;
if (rand_config.base64) {
BIO *b64 = BIO_new(BIO_f_base64());
if (b64 == NULL)
goto err;
out = BIO_push(b64, out);
}
while (num > 0) {
unsigned char buf[4096];
int chunk;
chunk = num;
if (chunk > (int) sizeof(buf))
chunk = sizeof(buf);
arc4random_buf(buf, chunk);
if (rand_config.hex) {
for (i = 0; i < chunk; i++)
BIO_printf(out, "%02x", buf[i]);
} else
BIO_write(out, buf, chunk);
num -= chunk;
}
if (rand_config.hex)
BIO_puts(out, "\n");
(void) BIO_flush(out);
ret = 0;
err:
ERR_print_errors(bio_err);
if (out)
BIO_free_all(out);
return (ret);
}
开发者ID:Heratom，项目名称:Firefly-project，代码行数:81，代码来源:rand.c
示例17: MAIN
//.........这里部分代码省略.........
pkey = load_pubkey(bio_err, infile,
(informat == FORMAT_NETSCAPE && sgckey ?
FORMAT_IISSGC : informat), 1,
passin, e, "Public Key");
else
pkey = load_key(bio_err, infile,
(informat == FORMAT_NETSCAPE && sgckey ?
FORMAT_IISSGC : informat), 1,
passin, e, "Private Key");
if (pkey != NULL)
rsa = pkey == NULL ? NULL : EVP_PKEY_get1_RSA(pkey);
EVP_PKEY_free(pkey);
}
if (rsa == NULL)
{
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL)
{
BIO_set_fp(out,stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
perror(outfile);
goto end;
}
}
if (text)
if (!RSA_print(out,rsa,0))
{
perror(outfile);
ERR_print_errors(bio_err);
goto end;
}
if (modulus)
{
BIO_printf(out,"Modulus=");
BN_print(out,rsa->n);
BIO_printf(out,"\n");
}
if (check)
{
int r = RSA_check_key(rsa);
if (r == 1)
BIO_printf(out,"RSA key ok\n");
else if (r == 0)
{
unsigned long err;
while ((err = ERR_peek_error()) != 0 &&
开发者ID:aosm，项目名称:OpenSSL098，代码行数:67，代码来源:rsa.c
示例18: MAIN
//.........这里部分代码省略.........
BIO_printf(bio_err, "read DSA key\n");
{
EVP_PKEY *pkey;
if (pubin)
pkey = load_pubkey(bio_err, infile, informat, 1,
passin, e, "Public Key");
else
pkey = load_key(bio_err, infile, informat, 1,
passin, e, "Private Key");
if (pkey) {
dsa = EVP_PKEY_get1_DSA(pkey);
EVP_PKEY_free(pkey);
}
}
if (dsa == NULL) {
BIO_printf(bio_err, "unable to load Key\n");
ERR_print_errors(bio_err);
goto end;
}
if (outfile == NULL) {
BIO_set_fp(out, stdout, BIO_NOCLOSE);
# ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
# endif
} else {
if (BIO_write_filename(out, outfile) <= 0) {
perror(outfile);
goto end;
}
}
if (text)
if (!DSA_print(out, dsa, 0)) {
perror(outfile);
ERR_print_errors(bio_err);
goto end;
}
if (modulus) {
fprintf(stdout, "Public Key=");
BN_print(out, dsa->pub_key);
fprintf(stdout, "\n");
}
if (noout)
goto end;
BIO_printf(bio_err, "writing DSA key\n");
if (outformat == FORMAT_ASN1) {
if (pubin || pubout)
i = i2d_DSA_PUBKEY_bio(out, dsa);
else
i = i2d_DSAPrivateKey_bio(out, dsa);
} else if (outformat == FORMAT_PEM) {
if (pubin || pubout)
i = PEM_write_bio_DSA_PUBKEY(out, dsa);
else
i = PEM_write_bio_DSAPrivateKey(out, dsa, enc,
NULL, 0, NULL, passout);
开发者ID:2trill2spill，项目名称:freebsd，代码行数:67，代码来源:dsa.c
示例19: MAIN
//.........这里部分代码省略.........
{
bad:
BIO_printf(bio_err,"usage: gendsa [args] dsaparam-file\n");
BIO_printf(bio_err," -out file - output the key to 'file'\n");
#ifndef OPENSSL_NO_DES
BIO_printf(bio_err," -des - encrypt the generated key with DES in cbc mode\n");
BIO_printf(bio_err," -des3 - encrypt the generated key with DES in ede cbc mode (168 bit key)\n");
#endif
#ifndef OPENSSL_NO_IDEA
BIO_printf(bio_err," -idea - encrypt the generated key with IDEA in cbc mode\n");
#endif
#ifndef OPENSSL_NO_AES
BIO_printf(bio_err," -aes128, -aes192, -aes256\n");
BIO_printf(bio_err," encrypt PEM output with cbc aes\n");
#endif
#ifndef OPENSSL_NO_ENGINE
BIO_printf(bio_err," -engine e - use engine e, possibly a hardware device.\n");
#endif
BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR);
BIO_printf(bio_err," - load the file (or the files in the directory) into\n");
BIO_printf(bio_err," the random number generator\n");
BIO_printf(bio_err," dsaparam-file\n");
BIO_printf(bio_err," - a DSA parameter file as generated by the dsaparam command\n");
goto end;
}
#ifndef OPENSSL_NO_ENGINE
e = setup_engine(bio_err, engine, 0);
#endif
if(!app_passwd(bio_err, NULL, passargout, NULL, &passout)) {
BIO_printf(bio_err, "Error getting password\n");
goto end;
}
in=BIO_new(BIO_s_file());
if (!(BIO_read_filename(in,dsaparams)))
{
perror(dsaparams);
goto end;
}
if ((dsa=PEM_read_bio_DSAparams(in,NULL,NULL,NULL)) == NULL)
{
BIO_printf(bio_err,"unable to load DSA parameter file\n");
goto end;
}
BIO_free(in);
in = NULL;
out=BIO_new(BIO_s_file());
if (out == NULL) goto end;
if (outfile == NULL)
{
BIO_set_fp(out,stdout,BIO_NOCLOSE);
#ifdef OPENSSL_SYS_VMS
{
BIO *tmpbio = BIO_new(BIO_f_linebuffer());
out = BIO_push(tmpbio, out);
}
#endif
}
else
{
if (BIO_write_filename(out,outfile) <= 0)
{
perror(outfile);
goto end;
}
}
if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL)
{
BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n");
}
if (inrand != NULL)
BIO_printf(bio_err,"%ld semi-random bytes loaded\n",
app_RAND_load_files(inrand));
BIO_printf(bio_err,"Generating DSA key, %d bits\n",
BN_num_bits(dsa->p));
if (!DSA_generate_key(dsa)) goto end;
app_RAND_write_file(NULL, bio_err);
if (!PEM_write_bio_DSAPrivateKey(out,dsa,enc,NULL,0,NULL, passout))
goto end;
ret=0;
end:
if (ret != 0)
ERR_print_errors(bio_err);
if (in != NULL) BIO_free(in);
if (out != NULL) BIO_free_all(out);
if (dsa != NULL) DSA_free(dsa);
if(passout) OPENSSL_free(passout);
apps_shutdown();
OPENSSL_EXIT(ret);
}
开发者ID:BlueFireworks，项目名称:Aur |
客服电话
APP下载
官方微信
请发表评论