C++ BAD_MADT_ENTRY函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中BAD_MADT_ENTRY函数的典型用法代码示例。如果您正苦于以下问题：C++ BAD_MADT_ENTRY函数的具体用法？C++ BAD_MADT_ENTRY怎么用？C++ BAD_MADT_ENTRY使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了BAD_MADT_ENTRY函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: acpi_parse_lapic

static int __init
acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_table_lapic *processor = NULL;

	processor = (struct acpi_table_lapic *)header;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* Record local apic id only when enabled */
	if (processor->flags.enabled)
		x86_acpiid_to_apicid[processor->acpi_id] = processor->id;

	/*
	 * We need to register disabled CPU as well to permit
	 * counting disabled CPUs. This allows us to size
	 * cpus_possible_map more accurately, to permit
	 * to not preallocating memory for all NR_CPUS
	 * when we use CPU hotplug.
	 */
	mp_register_lapic(processor->id,	/* APIC ID */
			  processor->flags.enabled);	/* Enabled? */

	return 0;
}

开发者ID:a2k2，项目名称:xen-unstable，代码行数:28，代码来源:boot.c

示例2: acpi_parse_int_src_ovr

static int __init
acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
		       const unsigned long end)
{
	struct acpi_madt_interrupt_override *intsrc =
		container_of(header, struct acpi_madt_interrupt_override,
			     header);

	if (BAD_MADT_ENTRY(intsrc, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	if (acpi_skip_timer_override &&
	    intsrc->source_irq == 0 && intsrc->global_irq == 2) {
			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
			return 0;
	}

	mp_override_legacy_irq(intsrc->source_irq,
			       ACPI_MADT_GET_POLARITY(intsrc->inti_flags),
			       ACPI_MADT_GET_TRIGGER(intsrc->inti_flags),
			       intsrc->global_irq);

	return 0;
}

开发者ID:Fantu，项目名称:Xen，代码行数:26，代码来源:boot.c

示例3: acpi_parse_plat_int_src

static int __init
acpi_parse_plat_int_src(struct acpi_subtable_header * header,
			const unsigned long end)
{
	struct acpi_madt_interrupt_source *plintsrc;
	int vector;

	plintsrc = (struct acpi_madt_interrupt_source *)header;

	if (BAD_MADT_ENTRY(plintsrc, end))
		return -EINVAL;

	vector = iosapic_register_platform_intr(plintsrc->type,
						plintsrc->global_irq,
						plintsrc->io_sapic_vector,
						plintsrc->eid,
						plintsrc->id,
						((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
						 ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
						IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
						((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
						 ACPI_MADT_TRIGGER_EDGE) ?
						IOSAPIC_EDGE : IOSAPIC_LEVEL);

	platform_intr_list[plintsrc->type] = vector;
	if (acpi_madt_rev > 1) {
		acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
	}

	acpi_cpei_phys_cpuid = ((plintsrc->id << 8) | (plintsrc->eid)) & 0xffff;

	return 0;
}

开发者ID:Blackburn29，项目名称:PsycoKernel，代码行数:33，代码来源:acpi.c

示例4: acpi_parse_lapic

static int __init
acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_local_apic *processor =
		container_of(header, struct acpi_madt_local_apic, header);
	bool_t enabled = 0;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* Record local apic id only when enabled */
	if (processor->lapic_flags & ACPI_MADT_ENABLED) {
		x86_acpiid_to_apicid[processor->processor_id] = processor->id;
		enabled = 1;
	}

	/*
	 * We need to register disabled CPU as well to permit
	 * counting disabled CPUs. This allows us to size
	 * cpus_possible_map more accurately, to permit
	 * to not preallocating memory for all NR_CPUS
	 * when we use CPU hotplug.
	 */
	mp_register_lapic(processor->id, enabled, 0);

	return 0;
}

开发者ID:Fantu，项目名称:Xen，代码行数:29，代码来源:boot.c

示例5: acpi_parse_int_src_ovr

static int __init
acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
		       const unsigned long end)
{
	struct acpi_table_int_src_ovr *intsrc = NULL;

	intsrc = (struct acpi_table_int_src_ovr *)header;

	if (BAD_MADT_ENTRY(intsrc, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	if (acpi_skip_timer_override &&
		intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
			return 0;
	}

	mp_override_legacy_irq(intsrc->bus_irq,
			       intsrc->flags.polarity,
			       intsrc->flags.trigger, intsrc->global_irq);

	return 0;
}

开发者ID:a2k2，项目名称:xen-unstable，代码行数:25，代码来源:boot.c

示例6: acpi_parse_ioapic

static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_io_apic *ioapic = NULL;
	struct ioapic_domain_cfg cfg = {
		.type = IOAPIC_DOMAIN_DYNAMIC,
		.ops = &mp_ioapic_irqdomain_ops,
	};

	ioapic = (struct acpi_madt_io_apic *)header;

	if (BAD_MADT_ENTRY(ioapic, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* Statically assign IRQ numbers for IOAPICs hosting legacy IRQs */
	if (ioapic->global_irq_base < nr_legacy_irqs())
		cfg.type = IOAPIC_DOMAIN_LEGACY;

	mp_register_ioapic(ioapic->id, ioapic->address, ioapic->global_irq_base,
			   &cfg);

	return 0;
}

开发者ID:DenisLug，项目名称:mptcp，代码行数:25，代码来源:boot.c

示例7: acpi_parse_plat_int_src

static int __init
acpi_parse_plat_int_src (
	acpi_table_entry_header *header, const unsigned long end)
{
	struct acpi_table_plat_int_src *plintsrc;
	int vector;

	plintsrc = (struct acpi_table_plat_int_src *) header;

	if (BAD_MADT_ENTRY(plintsrc, end))
		return -EINVAL;

	/*
	 * Get vector assignment for this interrupt, set attributes,
	 * and program the IOSAPIC routing table.
	 */
	vector = iosapic_register_platform_intr(plintsrc->type,
						plintsrc->global_irq,
						plintsrc->iosapic_vector,
						plintsrc->eid,
						plintsrc->id,
						(plintsrc->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
						(plintsrc->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);

	platform_intr_list[plintsrc->type] = vector;
	return 0;
}

开发者ID:BackupTheBerlios，项目名称:tuxap，代码行数:27，代码来源:acpi.c

示例8: acpi_parse_lapic

static int __init
acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_local_apic *processor = NULL;

	processor = (struct acpi_madt_local_apic *)header;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* Ignore invalid ID */
	if (processor->id == 0xff)
		return 0;

	/*
	 * We need to register disabled CPU as well to permit
	 * counting disabled CPUs. This allows us to size
	 * cpus_possible_map more accurately, to permit
	 * to not preallocating memory for all NR_CPUS
	 * when we use CPU hotplug.
	 */
	acpi_register_lapic(processor->id,	/* APIC ID */
			    processor->processor_id, /* ACPI ID */
			    processor->lapic_flags & ACPI_MADT_ENABLED);

	return 0;
}

开发者ID:EMFPGA，项目名称:linux_media，代码行数:29，代码来源:boot.c

示例9: acpi_parse_x2apic

static int __init
acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
{
	struct acpi_madt_local_x2apic *processor = NULL;

	processor = (struct acpi_madt_local_x2apic *)header;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

#ifdef CONFIG_X86_X2APIC
	/*
	 * We need to register disabled CPU as well to permit
	 * counting disabled CPUs. This allows us to size
	 * cpus_possible_map more accurately, to permit
	 * to not preallocating memory for all NR_CPUS
	 * when we use CPU hotplug.
	 */
	acpi_register_lapic(processor->local_apic_id,	/* APIC ID */
			    processor->lapic_flags & ACPI_MADT_ENABLED);
#else
	printk(KERN_WARNING PREFIX "x2apic entry ignored\n");
#endif

	return 0;
}

开发者ID:Scorpiion，项目名称:Renux_cross_eglibc，代码行数:28，代码来源:boot.c

示例10: acpi_parse_gic_cpu_interface

static int __init
acpi_parse_gic_cpu_interface(struct acpi_subtable_header *header,
				const unsigned long end)
{
	struct acpi_madt_generic_interrupt *processor;

	processor = (struct acpi_madt_generic_interrupt *)header;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);
	acpi_map_gic_cpu_interface(processor);
	return 0;
}

开发者ID:0x000000FF，项目名称:edison-linux，代码行数:15，代码来源:acpi.c

示例11: acpi_parse_lapic_addr_ovr

static int __init
acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
			  const unsigned long end)
{
	struct acpi_madt_local_apic_override *lapic_addr_ovr =
		container_of(header, struct acpi_madt_local_apic_override,
			     header);

	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
		return -EINVAL;

	acpi_lapic_addr = lapic_addr_ovr->address;

	return 0;
}

开发者ID:codercold，项目名称:xen-4.4，代码行数:15，代码来源:boot.c

示例12: acpi_parse_nmi_src

static int __init
acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_nmi_source *nmi_src =
		container_of(header, struct acpi_madt_nmi_source, header);

	if (BAD_MADT_ENTRY(nmi_src, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* TBD: Support nimsrc entries? */

	return 0;
}

开发者ID:codercold，项目名称:xen-4.4，代码行数:15，代码来源:boot.c

示例13: acpi_parse_lapic_addr_ovr

static int __init
acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
			  const unsigned long end)
{
	struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;

	lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header;

	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
		return -EINVAL;

	acpi_lapic_addr = lapic_addr_ovr->address;

	return 0;
}

开发者ID:a2k2，项目名称:xen-unstable，代码行数:15，代码来源:boot.c

示例14: acpi_parse_lapic_nmi

static int __init
acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_local_apic_nmi *lapic_nmi =
		container_of(header, struct acpi_madt_local_apic_nmi, header);

	if (BAD_MADT_ENTRY(lapic_nmi, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	if (lapic_nmi->lint != 1)
		printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");

	return 0;
}

开发者ID:codercold，项目名称:xen-4.4，代码行数:16，代码来源:boot.c

示例15: acpi_parse_ioapic

static int __init
acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
	struct acpi_madt_io_apic *ioapic =
		container_of(header, struct acpi_madt_io_apic, header);

	if (BAD_MADT_ENTRY(ioapic, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	mp_register_ioapic(ioapic->id,
			   ioapic->address, ioapic->global_irq_base);

	return 0;
}

开发者ID:codercold，项目名称:xen-4.4，代码行数:16，代码来源:boot.c

示例16: acpi_parse_int_src_ovr

static int __init
acpi_parse_int_src_ovr (
	acpi_table_entry_header *header, const unsigned long end)
{
	struct acpi_table_int_src_ovr *p;

	p = (struct acpi_table_int_src_ovr *) header;

	if (BAD_MADT_ENTRY(p, end))
		return -EINVAL;

	iosapic_override_isa_irq(p->bus_irq, p->global_irq,
				 (p->flags.polarity == 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
				 (p->flags.trigger == 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
	return 0;
}

开发者ID:OpenHMR，项目名称:Open-HMR600，代码行数:16，代码来源:acpi.c

示例17: acpi_parse_lapic_addr_ovr

static int __init
acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
			  const unsigned long end)
{
	struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;

	lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;

	if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	acpi_lapic_addr = lapic_addr_ovr->address;

	return 0;
}

开发者ID:EMFPGA，项目名称:linux_media，代码行数:17，代码来源:boot.c

示例18: acpi_parse_sapic

static int __init
acpi_parse_sapic(struct acpi_subtable_header *header, const unsigned long end)
{
	struct acpi_madt_local_sapic *processor = NULL;

	processor = (struct acpi_madt_local_sapic *)header;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	acpi_register_lapic((processor->id << 8) | processor->eid,/* APIC ID */
			    processor->lapic_flags & ACPI_MADT_ENABLED);

	return 0;
}

开发者ID:59psi，项目名称:linux，代码行数:17，代码来源:boot.c

示例19: acpi_parse_int_src_ovr

static int __init
acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
		       const unsigned long end)
{
	struct acpi_madt_interrupt_override *intsrc = NULL;

	intsrc = (struct acpi_madt_interrupt_override *)header;

	if (BAD_MADT_ENTRY(intsrc, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
		acpi_sci_ioapic_setup(intsrc->global_irq,
				      intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
				      (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
		return 0;
	}

开发者ID:Scorpiion，项目名称:Renux_cross_eglibc，代码行数:19，代码来源:boot.c

示例20: acpi_parse_x2apic

static int __init
acpi_parse_x2apic(struct acpi_subtable_header *header, const unsigned long end)
{
	struct acpi_madt_local_x2apic *processor =
		container_of(header, struct acpi_madt_local_x2apic, header);
	bool_t enabled = 0;

	if (BAD_MADT_ENTRY(processor, end))
		return -EINVAL;

	acpi_table_print_madt_entry(header);

	/* Record local apic id only when enabled and fitting. */
	if (processor->local_apic_id >= MAX_APICS ||
	    processor->uid >= MAX_MADT_ENTRIES) {
		printk("%sAPIC ID %#x and/or ACPI ID %#x beyond limit"
		       " - processor ignored\n",
		       processor->lapic_flags & ACPI_MADT_ENABLED ?
				KERN_WARNING "WARNING: " : KERN_INFO,
		       processor->local_apic_id, processor->uid);
		/*
		 * Must not return an error here, to prevent
		 * acpi_table_parse_entries() from terminating early.
		 */
		return 0 /* -ENOSPC */;
	}
	if (processor->lapic_flags & ACPI_MADT_ENABLED) {
		x86_acpiid_to_apicid[processor->uid] =
			processor->local_apic_id;
		enabled = 1;
	}

	/*
	 * We need to register disabled CPU as well to permit
	 * counting disabled CPUs. This allows us to size
	 * cpus_possible_map more accurately, to permit
	 * to not preallocating memory for all NR_CPUS
	 * when we use CPU hotplug.
	 */
	mp_register_lapic(processor->local_apic_id, enabled, 0);

	return 0;
}

开发者ID:codercold，项目名称:xen-4.4，代码行数:43，代码来源:boot.c

注：本文中的BAD_MADT_ENTRY函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ BAIL函数代码示例发布时间：2022-05-30

C++ BAD_CAST函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19146|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8628|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ BAD_MADT_ENTRY函数代码示例

示例1: acpi_parse_lapic

示例2: acpi_parse_int_src_ovr

示例3: acpi_parse_plat_int_src

示例4: acpi_parse_lapic

示例5: acpi_parse_int_src_ovr

示例6: acpi_parse_ioapic

示例7: acpi_parse_plat_int_src

示例8: acpi_parse_lapic

示例9: acpi_parse_x2apic

示例10: acpi_parse_gic_cpu_interface

示例11: acpi_parse_lapic_addr_ovr

示例12: acpi_parse_nmi_src

示例13: acpi_parse_lapic_addr_ovr

示例14: acpi_parse_lapic_nmi

示例15: acpi_parse_ioapic

示例16: acpi_parse_int_src_ovr

示例17: acpi_parse_lapic_addr_ovr

示例18: acpi_parse_sapic

示例19: acpi_parse_int_src_ovr

示例20: acpi_parse_x2apic

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-35373

krishnaik06/Machine-Learning-in-90-days

treesouth/AndroidLibrary: A list of awes

微信小程序返回页面传值

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053