C++ At_sprintf函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中At_sprintf函数的典型用法代码示例。如果您正苦于以下问题：C++ At_sprintf函数的具体用法？C++ At_sprintf怎么用？C++ At_sprintf使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了At_sprintf函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: At_TestCgeqreqPara

VOS_UINT32 At_TestCgeqreqPara(VOS_UINT8 ucIndex)
{
    VOS_UINT16      usLength;

    usLength = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                        (VOS_CHAR *)pgucAtSndCodeAddr,(VOS_CHAR *)pgucAtSndCodeAddr,
                                        "%s: \"IP\",%s%s",
                                        g_stParseContext[ucIndex].pstCmdElement->pszCmdName,
                                        CGEQREQ_TEST_CMD_PARA_STRING,
                                        gaucAtCrLf);

#if (FEATURE_ON == FEATURE_IPV6)

    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                        (VOS_CHAR *)pgucAtSndCodeAddr,(VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                        "%s: \"IPV6\",%s%s",
                                        g_stParseContext[ucIndex].pstCmdElement->pszCmdName,
                                        CGEQREQ_TEST_CMD_PARA_STRING,
                                        gaucAtCrLf);


    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                        (VOS_CHAR *)pgucAtSndCodeAddr,(VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                        "%s: \"IPV4V6\",%s",
                                        g_stParseContext[ucIndex].pstCmdElement->pszCmdName,
                                        CGEQREQ_TEST_CMD_PARA_STRING);
#endif

    gstAtSendData.usBufLen = usLength;

    return AT_OK;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:32，代码来源:AtTestParaCmd.c

示例2: atQryDLoadInfoCnf

VOS_UINT32 atQryDLoadInfoCnf(VOS_UINT8 ucClientId, VOS_VOID *pMsgBlock)
{
    FTM_RD_DLOADINFO_CNF_STRU *pstCnf = NULL;
    OS_MSG_STRU*pEvent = NULL;
    gstLAtSendData.usBufLen = 0;

    pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_RD_DLOADINFO_CNF_STRU *)pEvent->ulParam1;

    if(NULL == pstCnf)
	{
    	CmdErrProc(ucClientId, ERR_MSP_FAILURE, 0, NULL);
		return AT_OK;
	}
    if(pstCnf->ulErrCode != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, pstCnf->ulErrCode, 0, NULL);
		return AT_OK;
    }
    else
    {
        gstLAtSendData.usBufLen = 0;
        gstLAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                                (VOS_CHAR *)(pgucLAtSndCodeAddr),
                                                (VOS_CHAR*)(pgucLAtSndCodeAddr + gstLAtSendData.usBufLen),
                                                "\r\nswver:%s\r\n",
                                                pstCnf->szSendSW
                                              );

        gstLAtSendData.usBufLen += (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                                (VOS_CHAR *)(pgucLAtSndCodeAddr),
                                                (VOS_CHAR*)(pgucLAtSndCodeAddr+ gstLAtSendData.usBufLen),
                                                "\r\nisover:%s\r\n",
                                                pstCnf->szSendISO
                                              );
        gstLAtSendData.usBufLen += (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                                (VOS_CHAR *)(pgucLAtSndCodeAddr),
                                                (VOS_CHAR*)(pgucLAtSndCodeAddr+ gstLAtSendData.usBufLen),
                                                "\r\nproduct name:%s\r\n",
                                                pstCnf->szSendProductID
                                              );
        gstLAtSendData.usBufLen += (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                                (VOS_CHAR *)(pgucLAtSndCodeAddr),
                                                (VOS_CHAR*)(pgucLAtSndCodeAddr+ gstLAtSendData.usBufLen),
                                                "\r\ndload type:%s\r\n",
                                                pstCnf->szSendDloadType
                                              );
        CmdErrProc(ucClientId, pstCnf->ulErrCode, gstLAtSendData.usBufLen, pgucLAtSndCodeAddr);
    }
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:51，代码来源:at_lte_upgrade_proc.c

示例3: AT_RcvImsaCireguInd

VOS_UINT32 AT_RcvImsaCireguInd(VOS_VOID * pMsg)
{
    /* 定义局部变量 */
    IMSA_AT_CIREGU_IND_STRU            *pstCireguInd;
    VOS_UINT8                           ucIndex;
    VOS_UINT16                          usLength;

    /* 初始化消息变量 */
    ucIndex      = 0;
    usLength     = 0;
    pstCireguInd = (IMSA_AT_CIREGU_IND_STRU *)pMsg;

    /* 通过ClientId获取ucIndex */
    if ( AT_FAILURE == At_ClientIdToUserId(pstCireguInd->usClientId, &ucIndex) )
    {
        AT_WARN_LOG("AT_RcvImsaCireguInd: WARNING:AT INDEX NOT FOUND!");
        return VOS_ERR;
    }

    /* 判断查询操作是否成功 */
    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s%s: %d",
                                       gaucAtCrLf,
                                       gastAtStringTab[AT_STRING_CIREGU].pucText,
                                       pstCireguInd->ulRegInfo);

    /* 如果IMS未注册，<ext_info>参数无意义 */
    if ((VOS_FALSE != pstCireguInd->ulRegInfo) && (VOS_FALSE != pstCireguInd->bitOpExtInfo))
    {
        usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                           (VOS_CHAR *)pgucAtSndCodeAddr,
                                           (VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                           ",%d",
                                           pstCireguInd->ulExtInfo);
    }

    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                       (VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                       "%s",
                                       gaucAtCrLf);

    gstAtSendData.usBufLen = usLength;
    At_SendResultData(ucIndex, pgucAtSndCodeAddr, gstAtSendData.usBufLen);

    return VOS_OK;
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:49，代码来源:AtCmdImsProc.c

示例4: atSetNVBackupCnf

VOS_UINT32 atSetNVBackupCnf(VOS_UINT8 ucClientId,VOS_VOID *pMsgBlock)
{
    FTM_SET_NVBACKUP_CNF_STRU *pstCnf = NULL;
    OS_MSG_STRU*pEvent = NULL;
    gstLAtSendData.usBufLen = 0;

    pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_SET_NVBACKUP_CNF_STRU *)pEvent->ulParam1;

    if(NULL == pstCnf)
	{
    	CmdErrProc(ucClientId, ERR_MSP_FAILURE, 0, NULL);
		return AT_OK;
	}
    if(pstCnf->ulErrCode != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, pstCnf->ulErrCode, 0, NULL);
		return AT_OK;
    }
    else
    {
        g_atNvBackupFlag++;

        gstLAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                               (VOS_CHAR *)pgucLAtSndCodeAddr,
                                               (VOS_CHAR*)pgucLAtSndCodeAddr,
                                               "\r\n%d\r\n",
                                               pstCnf->ulRetValue
                                             );

        CmdErrProc(ucClientId, pstCnf->ulErrCode, gstLAtSendData.usBufLen, pgucLAtSndCodeAddr);
    }
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:34，代码来源:at_lte_upgrade_proc.c

示例5: atQryAuthorityIDCnf

VOS_UINT32 atQryAuthorityIDCnf(VOS_UINT8 ucClientId,VOS_VOID *pMsgBlock)
{
    FTM_RD_AUTHORITYID_CNF_STRU *pstCnf = NULL;
    OS_MSG_STRU*pEvent = NULL;
    gstLAtSendData.usBufLen = 0;

    pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_RD_AUTHORITYID_CNF_STRU *)pEvent->ulParam1;

    if(NULL == pstCnf)
	{
    	CmdErrProc(ucClientId, ERR_MSP_FAILURE, 0, NULL);
		return AT_OK;
	}
    if(pstCnf->ulErrCode != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, pstCnf->ulErrCode, 0, NULL);
		return AT_OK;
    }
    else
    {
        gstLAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                               (VOS_CHAR*)pgucLAtSndCodeAddr,
                                               (VOS_CHAR*)pgucLAtSndCodeAddr,
                                               "\r\n%s,%s\r\n",
                                               pstCnf->szAuthorityID,pstCnf->szAuthorityType
                                             );

	    CmdErrProc(ucClientId, pstCnf->ulErrCode, gstLAtSendData.usBufLen, pgucLAtSndCodeAddr);
    }
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:32，代码来源:at_lte_upgrade_proc.c

示例6: atSetNVRstSTTSCnf

VOS_UINT32 atSetNVRstSTTSCnf(VOS_UINT8 ucClientId,VOS_VOID *pMsgBlock)
{
    FTM_SET_NVRSTSTTS_CNF_STRU *pstCnf = NULL;
    OS_MSG_STRU*pEvent = NULL;
    gstLAtSendData.usBufLen = 0;
/*  VOS_BOOL bRet = TRUE;
 */
    pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_SET_NVRSTSTTS_CNF_STRU *)pEvent->ulParam1;

    if(NULL == pstCnf)
	{
    	CmdErrProc(ucClientId, ERR_MSP_FAILURE, 0, NULL);
		return AT_OK;
	}

    if(pstCnf->ulErrCode != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, pstCnf->ulErrCode, 0, NULL);
		return AT_OK;
    }
    else
    {
        gstLAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                               (VOS_CHAR *)pgucLAtSndCodeAddr,
                                               (VOS_CHAR*)pgucLAtSndCodeAddr,
                                               "\r\n%s\r\n",
                                               pstCnf->szNVRst
                                             );
        CmdErrProc(ucClientId, pstCnf->ulErrCode, gstLAtSendData.usBufLen, pgucLAtSndCodeAddr);
    }
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:33，代码来源:at_lte_upgrade_proc.c

示例7: atQryBootRomVerCnf

/* BEGIN: To_Be_Deleted_V7R2 */
VOS_UINT32 atQryBootRomVerCnf(VOS_UINT8 ucClientId,VOS_VOID *pMsgBlock)
{
    FTM_RD_BOOTROMVER_CNF_STRU *pstCnf = NULL;
    OS_MSG_STRU*pEvent = NULL;
    gstLAtSendData.usBufLen = 0;

    pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_RD_BOOTROMVER_CNF_STRU *)pEvent->ulParam1;

    if(NULL == pstCnf)
	{
    	CmdErrProc(ucClientId, ERR_MSP_FAILURE, 0, NULL);
		return AT_OK;
	}

    if(pstCnf->ulErrCode != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, pstCnf->ulErrCode, 0, NULL);
		return AT_OK;
    }
    else
    {
        gstLAtSendData.usBufLen = (VOS_UINT16)At_sprintf(
                                                    AT_CMD_MAX_LEN,
                                                    (VOS_CHAR *)(pgucLAtSndCodeAddr),
                                                    (VOS_CHAR *)(pgucLAtSndCodeAddr + gstLAtSendData.usBufLen),
                                                    "\r\n%s\r\n",
                                                    pstCnf->szSendStr
                                                    );

        CmdErrProc(ucClientId, pstCnf->ulErrCode, gstLAtSendData.usBufLen, pgucLAtSndCodeAddr);
    }
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:35，代码来源:at_lte_upgrade_proc.c

示例8: atQryDLoadVer

VOS_UINT32 atQryDLoadVer(VOS_UINT8 ucClientId)
{
    VOS_UINT32 ulRst = AT_OK;
    VOS_UINT8* pData = NULL;
    gstAtSendData.usBufLen = 0;

    pData = VOS_MemAlloc(WUEPS_PID_AT, (DYNAMIC_MEM_PT), UPGRADE_STR_BUF_SIZE);
    if(NULL == pData)
    {
        CmdErrProc(ucClientId, ERR_MSP_MALLOC_FAILUE, 0, NULL);
        return AT_ERROR;
    }

    MSP_MEMSET(pData,0,UPGRADE_STR_BUF_SIZE);
    ulRst = BSP_DLOAD_GetDloadVer((BSP_CHAR *)pData,UPGRADE_STR_BUF_SIZE);
    if(ulRst != ERR_MSP_SUCCESS)
    {
        VOS_MemFree(WUEPS_PID_AT, pData);
        CmdErrProc(ucClientId, ulRst, 0, NULL);
        return AT_ERROR;
    }

    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                           (VOS_CHAR *)pgucAtSndCodeAddr,
                                           (VOS_CHAR*)pgucAtSndCodeAddr,
                                           "\r%s\r",
                                           pData
                                         );

    VOS_MemFree(WUEPS_PID_AT, pData);

    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:33，代码来源:at_lte_upgrade_proc.c

示例9: atQryFCHANParaCnfProc

VOS_UINT32 atQryFCHANParaCnfProc(VOS_UINT8 ucClientId, VOS_VOID *pMsgBlock)
{
 	FTM_RD_FCHAN_CNF_STRU *pstCnf = NULL;
	OS_MSG_STRU*pEvent = NULL;
	VOS_UINT16 usLength = 0;

	pEvent = (OS_MSG_STRU*)(((MsgBlock*)pMsgBlock)->aucValue);
	pstCnf = (FTM_RD_FCHAN_CNF_STRU *)pEvent->ulParam1;


	if(NULL == pstCnf)
	{
		return ERR_MSP_FAILURE;
	}

    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
    	(VOS_CHAR *)pgucLAtSndCodeAddr,
    	(VOS_CHAR *)pgucLAtSndCodeAddr + usLength,
    	"^FCHAN:%d,%d,%d,%d",
    	pstCnf->enFchanMode,
    	pstCnf->ucBand,
    	pstCnf->usUlChannel,
    	pstCnf->usDlChannel);

	CmdErrProc(ucClientId, pstCnf->ulErrCode, usLength, pgucLAtSndCodeAddr);
	return AT_FW_CLIENT_STATUS_READY;
}

开发者ID:CM13-HI6210SFT，项目名称:huawei_kernel_3.10.71_hi6210sft，代码行数:27，代码来源:at_lte_ct_proc.c

示例10: AT_RcvImsaCirepiInd

VOS_UINT32 AT_RcvImsaCirepiInd(VOS_VOID * pMsg)
{
    /* 定义局部变量 */
    IMSA_AT_CIREPI_IND_STRU            *pstCirepiInd;
    VOS_UINT8                           ucIndex;

    /* 初始化消息变量 */
    ucIndex      = 0;
    pstCirepiInd = (IMSA_AT_CIREPI_IND_STRU *)pMsg;

    /* 通过ClientId获取ucIndex */
    if ( AT_FAILURE == At_ClientIdToUserId(pstCirepiInd->usClientId, &ucIndex) )
    {
        AT_WARN_LOG("AT_RcvImsaCirepiInd: WARNING:AT INDEX NOT FOUND!");
        return VOS_ERR;
    }

    /* 判断查询操作是否成功 */
    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                                    (VOS_CHAR *)pgucAtSndCodeAddr,
                                                    (VOS_CHAR *)pgucAtSndCodeAddr,
                                                    "%s%s: %d%s",
                                                    gaucAtCrLf,
                                                    gastAtStringTab[AT_STRING_CIREPI].pucText,
                                                    pstCirepiInd->enImsvops,
                                                    gaucAtCrLf);

    At_SendResultData(ucIndex, pgucAtSndCodeAddr, gstAtSendData.usBufLen);

    return VOS_OK;
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:31，代码来源:AtCmdImsProc.c

示例11: AT_RcvImsaMtStateInd

VOS_UINT32 AT_RcvImsaMtStateInd(VOS_VOID * pMsg)
{
    /* 定义局部变量 */
    IMSA_AT_MT_STATES_IND_STRU          *pstMtStatusInd;
    VOS_UINT8                           ucIndex;
    VOS_CHAR                            acString[AT_IMSA_CALL_ASCII_NUM_MAX_LENGTH + 1];

    /* 初始化消息变量 */
    ucIndex     = 0;
    pstMtStatusInd  = (IMSA_AT_MT_STATES_IND_STRU*)pMsg;

    /* 通过ClientId获取ucIndex */
    if ( AT_FAILURE == At_ClientIdToUserId(pstMtStatusInd->usClientId, &ucIndex) )
    {
        AT_WARN_LOG("AT_RcvImsaImpuSetCnf: WARNING:AT INDEX NOT FOUND!");
        return VOS_ERR;
    }

    VOS_MemSet(acString, 0, sizeof(acString));
    VOS_MemCpy(acString, pstMtStatusInd->aucAsciiCallNum, AT_IMSA_CALL_ASCII_NUM_MAX_LENGTH);

    gstAtSendData.usBufLen= (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                                   (VOS_CHAR *)pgucAtSndCodeAddr,
                                                   (VOS_CHAR *)pgucAtSndCodeAddr,
                                                   "%s^IMSMTRPT: %s,%d,%d%s",
                                                   gaucAtCrLf,
                                                   acString,
                                                   pstMtStatusInd->ucMtStatus,
                                                   pstMtStatusInd->ulCauseCode,
                                                   gaucAtCrLf);
    /* 调用At_SendResultData发送命令结果 */
    At_SendResultData(ucIndex, pgucAtSndCodeAddr, gstAtSendData.usBufLen);

    return VOS_OK;
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:35，代码来源:AtCmdImsProc.c

示例12: atSetNVFactoryRestore

VOS_UINT32 atSetNVFactoryRestore(VOS_UINT8 ucClientId)
{
    VOS_UINT32 ulRst = AT_OK;

    /*因为MODEN拨号会下发该命令，所以在moden口不进行NV恢复，直接返回OK*/
    if ( AT_MODEM_USER == gastAtClientTab[ucClientId].UserType )
    {
        return AT_OK;
    }

    ulRst = NVM_RevertFNV();
    if(ulRst != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, ulRst, 0, NULL);
        return AT_ERROR;
    }

    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                           (VOS_CHAR *)pgucAtSndCodeAddr,
                                           (VOS_CHAR*)pgucAtSndCodeAddr,
                                           "\r%d\r",
                                           ulRst
                                         );
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:25，代码来源:at_lte_upgrade_proc.c

示例13: atQryAuthorityVer

VOS_UINT32 atQryAuthorityVer(VOS_UINT8 ucClientId)
{
    VOS_UINT32 ulRst = AT_OK;
    VOS_UINT32 ulAuthorityVer = 0;
    VOS_UINT8  ucVer[4] ={0};
    VOS_UINT32 i = 0;

    ulRst = At_GetNvAuthorityVer(&ulAuthorityVer);
    if(ulRst != ERR_MSP_SUCCESS)
    {
        CmdErrProc(ucClientId, ulRst, 0, NULL);
        return AT_ERROR;
    }

    MSP_MEMCPY(ucVer,&ulAuthorityVer,sizeof(VOS_UINT32));

    for(i = 0;i < 4;i++)
    {
        ucVer[i] = (ucVer[i] > 9 ? 0 : ucVer[i]) + '0';  /**/
    }

    gstAtSendData.usBufLen = 0;
    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf( AT_CMD_MAX_LEN,
                                                (VOS_CHAR *)pgucAtSndCodeAddr,
                                                (VOS_CHAR*)pgucAtSndCodeAddr,
                                                "\r%s\r",
                                                ucVer
                                                );
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:30，代码来源:at_lte_upgrade_proc.c

示例14: AT_RcvImsaCirepQryCnf

VOS_UINT32 AT_RcvImsaCirepQryCnf(VOS_VOID * pMsg)
{
    /* 定义局部变量 */
    IMSA_AT_CIREP_QRY_CNF_STRU         *pstCirepCnf;
    VOS_UINT8                           ucIndex;
    VOS_UINT32                          ulResult;

    /* 初始化消息变量 */
    ucIndex     = 0;
    pstCirepCnf = (IMSA_AT_CIREP_QRY_CNF_STRU *)pMsg;

    /* 通过ClientId获取ucIndex */
    if ( AT_FAILURE == At_ClientIdToUserId(pstCirepCnf->usClientId, &ucIndex) )
    {
        AT_WARN_LOG("AT_RcvImsaCirepQryCnf: WARNING:AT INDEX NOT FOUND!");
        return VOS_ERR;
    }

    if (AT_IS_BROADCAST_CLIENT_INDEX(ucIndex))
    {
        AT_WARN_LOG("AT_RcvImsaCirepQryCnf: WARNING:AT_BROADCAST_INDEX!");
        return VOS_ERR;
    }

    /* 判断当前操作类型是否为AT_CMD_CIREP_QRY */
    if ( AT_CMD_CIREP_QRY != gastAtClientTab[ucIndex].CmdCurrentOpt )
    {
        AT_WARN_LOG("AT_RcvImsaCirepQryCnf: WARNING:Not AT_CMD_CIREP_QRY!");
        return VOS_ERR;
    }

    /* 复位AT状态 */
    AT_STOP_TIMER_CMD_READY(ucIndex);

    /* 判断查询操作是否成功 */
    if ( VOS_OK == pstCirepCnf->ulResult )
    {

        gstAtSendData.usBufLen= (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                                       "%s: %d,%d",
                                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName,
                                                       pstCirepCnf->enReport,
                                                       pstCirepCnf->enImsvops);

        ulResult                = AT_OK;
    }
    else
    {
        gstAtSendData.usBufLen  = 0;
        ulResult                = AT_ERROR;
    }

    /* 调用At_FormatResultData发送命令结果 */
    At_FormatResultData(ucIndex, ulResult);

    return VOS_OK;
}

开发者ID:XePeleato，项目名称:android_kernel_huawei_venus，代码行数:59，代码来源:AtCmdImsProc.c

示例15: At_TestAuhtdata

VOS_UINT32 At_TestAuhtdata(VOS_UINT8 ucIndex)
{
    VOS_UINT16 usLength = 0;

#if (FEATURE_ON == FEATURE_LTE)
    usLength = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr,
                                   "%s: (0-31),(0-2),,",
                                   g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
#else
    usLength = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s: (1-11),(0-2),,",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
#endif

    gstAtSendData.usBufLen = usLength;

    return AT_OK;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:18，代码来源:AtTestParaCmd.c

示例16: At_TestCgdcont

VOS_UINT32 At_TestCgdcont(VOS_UINT8 ucIndex)
{
    VOS_UINT16 usLength = 0;

#if (FEATURE_ON == FEATURE_LTE)
    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s: (0-31),\"IP\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);


#if (FEATURE_ON == FEATURE_IPV6)
    if (AT_IPV6_CAPABILITY_IPV4_ONLY != AT_GetIpv6Capability())
    {
        usLength += (TAF_UINT16)At_sprintf(AT_CMD_MAX_LEN,(TAF_CHAR*)pgucAtSndCodeAddr,(TAF_CHAR*)pgucAtSndCodeAddr + usLength,
                                           "%s: (0-31),\"IPV6\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                           g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
        usLength += (TAF_UINT16)At_sprintf(AT_CMD_MAX_LEN,(TAF_CHAR*)pgucAtSndCodeAddr,(TAF_CHAR*)pgucAtSndCodeAddr + usLength,
                                           "%s: (0-31),\"IPV4V6\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                           g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
    }
#endif

    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                       "%s: (0-31),\"PPP\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);

#else
    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s: (1-11),\"IP\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);

#if (FEATURE_ON == FEATURE_IPV6)
    if (AT_IPV6_CAPABILITY_IPV4_ONLY != AT_GetIpv6Capability())
    {
        usLength += (TAF_UINT16)At_sprintf(AT_CMD_MAX_LEN,(TAF_CHAR*)pgucAtSndCodeAddr,(TAF_CHAR*)pgucAtSndCodeAddr + usLength,
                                           "%s: (1-11),\"IPV6\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                           g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
        usLength += (TAF_UINT16)At_sprintf(AT_CMD_MAX_LEN,(TAF_CHAR*)pgucAtSndCodeAddr,(TAF_CHAR*)pgucAtSndCodeAddr + usLength,
                                           "%s: (1-11),\"IPV4V6\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)\r\n",
                                           g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
    }
#endif

    usLength += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr + usLength,
                                       "%s: (1-11),\"PPP\",,,(0-2),(0-3),(0,1),(0,1),(0-2),(0,1)",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);


#endif

    gstAtSendData.usBufLen = usLength;

    return AT_OK;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:54，代码来源:AtTestParaCmd.c

示例17: AT_TestCbgPara

VOS_UINT32 AT_TestCbgPara( VOS_UINT8 ucIndex )
{
    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                       (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s: (0,1)",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);

    return AT_OK;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:10，代码来源:AtTestParaCmd.c

示例18: At_TestCgtftrdp

VOS_UINT32 At_TestCgtftrdp(VOS_UINT8 ucIndex)
{
    VOS_UINT16 usLength = 0;

    usLength = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR *)pgucAtSndCodeAddr, (VOS_CHAR *)pgucAtSndCodeAddr,
                                       "%s: (1-31)",
                                       g_stParseContext[ucIndex].pstCmdElement->pszCmdName);
    gstAtSendData.usBufLen = usLength;

    return AT_OK;
}

开发者ID:herryfan，项目名称:kernel-huawei-h60，代码行数:11，代码来源:AtTestParaCmd.c

示例19: AT_QryIsmcoexPara

VOS_UINT32 AT_QryIsmcoexPara(VOS_UINT8 ucIndex)
{
    VOS_UINT32 i;

    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR*)pgucAtSndCodeAddr,
        (VOS_CHAR*)pgucAtSndCodeAddr, "^ISMCOEX:");

    for(i = 0; i < L4A_ISMCOEX_BANDWIDTH_NUM; i++)
    {
        gstAtSendData.usBufLen += (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN,
            (VOS_CHAR *)pgucAtSndCodeAddr,(VOS_CHAR*)pgucAtSndCodeAddr + gstAtSendData.usBufLen,
            "%d %d %d %d %d %d,", g_astCnfIsmcoex[i].ulFlag, g_astCnfIsmcoex[i].ulTXBegin,
            g_astCnfIsmcoex[i].ulTXEnd, g_astCnfIsmcoex[i].lTXPower,
            g_astCnfIsmcoex[i].ulRXBegin, g_astCnfIsmcoex[i].ulRXEnd);
    }

    gstAtSendData.usBufLen--;

    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:20，代码来源:at_lte_ms_proc.c

示例20: atSetNVRDLenPara

//*****************************************************************************
// oˉêy??3?: atSetNVRDLenPara
// 1|?ü?èê?: ?áNV3¤?èY
//
// 2?êy?μ?÷:
//   ulIndex [in] ó??§?÷òy
//
// ·μ ?? ?μ:
//    TODO: ...
//
// μ÷ó?òa?ó: TODO: ...
// μ÷ó??ùày: TODO: ...
//*****************************************************************************
VOS_UINT32 atSetNVRDLenPara(VOS_UINT8 ucClientId)
{
    VOS_UINT32 ulRet = ERR_MSP_FAILURE;
    VOS_UINT16 usNVID = 0;
    VOS_UINT32 ulNVLen = 0;


    /*PCLINT*/
    if(ucClientId == 0)
    {

    }

    if(AT_CMD_OPT_SET_PARA_CMD != g_stATParseCmd.ucCmdOptType)
    {
        g_ulNVRDTL = 1;
        return AT_CME_INCORRECT_PARAMETERS;
    }

    if(gucAtParaIndex > 1)
    {
        g_ulNVRDTL = 2;
        return AT_CME_INCORRECT_PARAMETERS;
    }

    if(0 == gastAtParaList[0].usParaLen)
    {
        g_ulNVRDTL = 3;
        return AT_CME_INCORRECT_PARAMETERS;
    }
    else
    {
        usNVID = (VOS_UINT16)gastAtParaList[0].ulParaValue;
    }
    ulRet = NV_GetLength(usNVID, (BSP_U32 *)&ulNVLen);
	//vos_printf("\n usNVID=0x%x ulNVLen =0x%x\n",usNVID,ulNVLen);
    //vos_printf("\n nvim_GetItemLenById ulRet=0x%x \n",ulRet);
   // HAL_DIAG_SDM_FUN(EN_SDM_NVRD_GETNVLEN, ulRet, usNVID, ulNVLen);

    if(ERR_MSP_SUCCESS != ulRet)
    {
        g_ulNVRDTL = 4;
        return AT_ERROR;
    }

    gstAtSendData.usBufLen = 0;
    gstAtSendData.usBufLen = (VOS_UINT16)At_sprintf(AT_CMD_MAX_LEN, (VOS_CHAR*)pgucAtSndCodeAddr,(VOS_CHAR*)pgucAtSndCodeAddr,
        "^NVRDLEN: %d", ulNVLen);
    g_ulNVRDTL = 7;
    return AT_OK;
}

开发者ID:debbiche，项目名称:android_kernel_huawei_p8，代码行数:64，代码来源:at_lte_ms_proc.c

注：本文中的At_sprintf函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ AtlInitCommonControls函数代码示例发布时间：2022-05-30

C++ AssistPlayerInCombat函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19144|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ At_sprintf函数代码示例

示例1: At_TestCgeqreqPara

示例2: atQryDLoadInfoCnf

示例3: AT_RcvImsaCireguInd

示例4: atSetNVBackupCnf

示例5: atQryAuthorityIDCnf

示例6: atSetNVRstSTTSCnf

示例7: atQryBootRomVerCnf

示例8: atQryDLoadVer

示例9: atQryFCHANParaCnfProc

示例10: AT_RcvImsaCirepiInd

示例11: AT_RcvImsaMtStateInd

示例12: atSetNVFactoryRestore

示例13: atQryAuthorityVer

示例14: AT_RcvImsaCirepQryCnf

示例15: At_TestAuhtdata

示例16: At_TestCgdcont

示例17: AT_TestCbgPara

示例18: At_TestCgtftrdp

示例19: AT_QryIsmcoexPara

示例20: atSetNVRDLenPara

请发表评论

全部评论

上一篇：

下一篇：

jcmsalves/kotlin-playground: Kotlin Andr

bradtraversy/iweather: Ionic 3 mobile we

avehtari/BDA_m_demos: Bayesian Data Anal

断牙刷新位置时间（断牙属性及刷新位置介绍

delphi进度条

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053