/**
  Writes a buffer to variable storage space, in the working block.

  This function writes a buffer to variable storage space into a firmware
  volume block device. The destination is specified by parameter
  VariableBase. Fault Tolerant Write protocol is used for writing.

  @param  VariableBase   Base address of variable to write
  @param  Buffer         Point to the data buffer.
  @param  BufferSize     The number of bytes of the data Buffer.

  @retval EFI_SUCCESS    The function completed successfully.
  @retval EFI_NOT_FOUND  Fail to locate Fault Tolerant Write protocol.
  @retval EFI_ABORTED    The function could not complete successfully.

**/
EFI_STATUS
FtwVariableSpace (
  IN EFI_PHYSICAL_ADDRESS   VariableBase,
  IN UINT8                  *Buffer,
  IN UINTN                  BufferSize
  )
{
  EFI_STATUS                         Status;
  EFI_HANDLE                         FvbHandle;
  EFI_LBA                            VarLba;
  UINTN                              VarOffset;
  UINT8                              *FtwBuffer;
  UINTN                              FtwBufferSize;
  EFI_FAULT_TOLERANT_WRITE_PROTOCOL  *FtwProtocol;

  //
  // Locate fault tolerant write protocol.
  //
  Status = GetFtwProtocol((VOID **) &FtwProtocol);
  if (EFI_ERROR (Status)) {
    return EFI_NOT_FOUND;
  }
  //
  // Locate Fvb handle by address.
  //
  Status = GetFvbInfoByAddress (VariableBase, &FvbHandle, NULL);
  if (EFI_ERROR (Status)) {
    return Status;
  }
  //
  // Get LBA and Offset by address.
  //
  Status = GetLbaAndOffsetByAddress (VariableBase, &VarLba, &VarOffset);
  if (EFI_ERROR (Status)) {
    return EFI_ABORTED;
  }
  //
  // Prepare for the variable data.
  //
  FtwBufferSize = ((VARIABLE_STORE_HEADER *) ((UINTN) VariableBase))->Size;
  FtwBuffer     = AllocatePool (FtwBufferSize);
  if (FtwBuffer == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  SetMem (FtwBuffer, FtwBufferSize, (UINT8) 0xff);
  CopyMem (FtwBuffer, Buffer, BufferSize);

  //
  // FTW write record.
  //
  Status = FtwProtocol->Write (
                          FtwProtocol,
                          VarLba,         // LBA
                          VarOffset,      // Offset
                          FtwBufferSize,  // NumBytes
                          NULL,           // PrivateData NULL
                          FvbHandle,      // Fvb Handle
                          FtwBuffer       // write buffer
                          );

  FreePool (FtwBuffer);
  return Status;
}

EFI_STATUS
BBTestQueryCapsuleCapabilitiesConformanceTest (
  IN EFI_BB_TEST_PROTOCOL       *This,
  IN VOID                       *ClientInterface,
  IN EFI_TEST_LEVEL             TestLevel,
  IN EFI_HANDLE                 SupportHandle
  )
{
  EFI_STATUS                           Status;
  EFI_STANDARD_TEST_LIBRARY_PROTOCOL   *StandardLib;
  EFI_TEST_ASSERTION                   AssertionType;
  UINT8                                *AllocatedBuffer;
  EFI_CAPSULE_HEADER                  *CapsuleHeaderArray[2];
  EFI_RESET_TYPE                       ResetType;

  //
  // Get the Standard Library Interface
  //
  Status = gtBS->HandleProtocol (
                   SupportHandle,
                   &gEfiStandardTestLibraryGuid,
                   &StandardLib
                   );

  if (EFI_ERROR(Status)) {
    return Status;
  }

  if (FALSE == CheckBBTestCanRunAndRecordAssertion(
                  StandardLib, 
                  L"RT.QueryCapsuleCapabilities_Conf - QueryCapsuleCapabilities_Conf it's not Supported in EFI",
                  __FILE__,
                  (UINTN)__LINE__
                  )) {
    return EFI_SUCCESS;
  }

  AllocatedBuffer = (UINT8 *)AllocatePool (sizeof(EFI_CAPSULE_HEADER));
  if (AllocatedBuffer == NULL) {
    StandardLib->RecordAssertion (
                   StandardLib,
                   EFI_TEST_ASSERTION_FAILED,
                   gTestGenericFailureGuid,
                   L"RT.QueryCapsuleCapabilities_Conf - Allocate zero pool for EFI_CAPSULE_HEADER",
                   L"%a:%d,Status - %r",
                   __FILE__,
                   (UINTN)__LINE__,
                   Status
                   );
    return Status;
  }

  CapsuleHeaderArray[0] = (EFI_CAPSULE_HEADER *) (UINTN)AllocatedBuffer;
  CapsuleHeaderArray[0]->CapsuleGuid = mEfiCapsuleHeaderGuid;
  CapsuleHeaderArray[0]->HeaderSize = sizeof(EFI_CAPSULE_HEADER);
  CapsuleHeaderArray[0]->CapsuleImageSize = sizeof(EFI_CAPSULE_HEADER);
  CapsuleHeaderArray[1] = NULL;
// When the flag is CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE and CAPSULE_FLAGS_PERSIST_ACROSS_RESET, platform will ignore the CapsuleGuid   
  CapsuleHeaderArray[0]->Flags = CAPSULE_FLAGS_PERSIST_ACROSS_RESET | CAPSULE_FLAGS_POPULATE_SYSTEM_TABLE;

  Status = gtRT->QueryCapsuleCapabilities(
  	               CapsuleHeaderArray, 
  	               1, 
  	               NULL, //invalid
  	               &ResetType);
  if ((Status == EFI_INVALID_PARAMETER) || (Status == EFI_UNSUPPORTED)) {
  	AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
  }

  StandardLib->RecordAssertion (
                 StandardLib,
                 AssertionType,
                 gMiscRuntimeServicesBBTestConformanceAssertionGuid004,
                 L"RT.QueryCapsuleCapabilities - invoke QueryCapsuleCapabilities with invalid MaxiumCapsuleSize",
                 L"%a:%d:Status - %r",
                 __FILE__,
                 (UINTN)__LINE__,
                 Status
                 );

  FreePool (AllocatedBuffer);
  return EFI_SUCCESS;
}

EFI_STATUS
FileOpen (
  IN  EFI_FILE    *File,
  OUT EFI_FILE    **NewHandle,
  IN  CHAR16      *FileName,
  IN  UINT64      OpenMode,
  IN  UINT64      Attributes
  )
{
  SEMIHOST_FCB  *FileFcb = NULL;
  EFI_STATUS    Status   = EFI_SUCCESS;
  UINTN         SemihostHandle;
  CHAR8         *AsciiFileName;
  UINT32        SemihostMode;
  BOOLEAN       IsRoot;

  if ((FileName == NULL) || (NewHandle == NULL)) {
    return EFI_INVALID_PARAMETER;
  }

  // Semihost interface requires ASCII filenames
  AsciiFileName = AllocatePool ((StrLen (FileName) + 1) * sizeof (CHAR8));
  if (AsciiFileName == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }
  UnicodeStrToAsciiStr (FileName, AsciiFileName);

  if ((AsciiStrCmp (AsciiFileName, "\\") == 0) ||
      (AsciiStrCmp (AsciiFileName, "/")  == 0) ||
      (AsciiStrCmp (AsciiFileName, "")   == 0) ||
      (AsciiStrCmp (AsciiFileName, ".")  == 0)) {
    // Opening '/', '\', '.', or the NULL pathname is trying to open the root directory
    IsRoot = TRUE;

    // Root directory node doesn't have a name.
    FreePool (AsciiFileName);
    AsciiFileName = NULL;
  } else {
    // Translate EFI_FILE_MODE into Semihosting mode
    if (OpenMode & EFI_FILE_MODE_WRITE) {
      SemihostMode = SEMIHOST_FILE_MODE_WRITE | SEMIHOST_FILE_MODE_BINARY;
    } else if (OpenMode & EFI_FILE_MODE_READ) {
      SemihostMode = SEMIHOST_FILE_MODE_READ  | SEMIHOST_FILE_MODE_BINARY;
    } else {
      return EFI_UNSUPPORTED;
    }

    // Add the creation flag if necessary
    if (OpenMode & EFI_FILE_MODE_CREATE) {
      SemihostMode |= SEMIHOST_FILE_MODE_CREATE;
    }

    // Call the semihosting interface to open the file.
    Status = SemihostFileOpen (AsciiFileName, SemihostMode, &SemihostHandle);
    if (EFI_ERROR(Status)) {
      return Status;
    }
    
    IsRoot = FALSE;
  }

  // Allocate a control block and fill it
  FileFcb = AllocateFCB ();
  if (FileFcb == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  FileFcb->FileName       = AsciiFileName;
  FileFcb->SemihostHandle = SemihostHandle;
  FileFcb->Position       = 0;
  FileFcb->IsRoot         = IsRoot;

  InsertTailList (&gFileList, &FileFcb->Link);

  *NewHandle = &FileFcb->File;

  return Status;
}

/**
  Install child handles if the Handle supports MBR format.

  @param[in]  This              Calling context.
  @param[in]  Handle            Parent Handle.
  @param[in]  DiskIo            Parent DiskIo interface.
  @param[in]  BlockIo           Parent BlockIo interface.
  @param[in]  BlockIo2          Parent BlockIo2 interface.
  @param[in]  DevicePath        Parent Device Path.

  @retval EFI_SUCCESS       A child handle was added.
  @retval EFI_MEDIA_CHANGED Media change was detected.
  @retval Others            MBR partition was not found.

**/
EFI_STATUS
PartitionInstallMbrChildHandles (
  IN  EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN  EFI_HANDLE                   Handle,
  IN  EFI_DISK_IO_PROTOCOL         *DiskIo,
  IN  EFI_BLOCK_IO_PROTOCOL        *BlockIo,
  IN  EFI_BLOCK_IO2_PROTOCOL       *BlockIo2,
  IN  EFI_DEVICE_PATH_PROTOCOL     *DevicePath
  )
{
  EFI_STATUS                Status;
  MASTER_BOOT_RECORD        *Mbr;
  UINT32                    ExtMbrStartingLba;
  UINTN                     Index;
  HARDDRIVE_DEVICE_PATH     HdDev;
  HARDDRIVE_DEVICE_PATH     ParentHdDev;
  EFI_STATUS                Found;
  UINT32                    PartitionNumber;
  EFI_DEVICE_PATH_PROTOCOL  *DevicePathNode;
  EFI_DEVICE_PATH_PROTOCOL  *LastDevicePathNode;
  UINT32                    BlockSize;
  UINT32                    MediaId;
  EFI_LBA                   LastBlock;

  Found           = EFI_NOT_FOUND;

  BlockSize = BlockIo->Media->BlockSize;
  MediaId   = BlockIo->Media->MediaId;
  LastBlock = BlockIo->Media->LastBlock;

  VBoxLogFlowFuncMarkDP(DevicePath);
  Mbr = AllocatePool (BlockSize);
  if (Mbr == NULL) {
    return Found;
  }

  Status = DiskIo->ReadDisk (
                     DiskIo,
                     MediaId,
                     0,
                     BlockSize,
                     Mbr
                     );
  if (EFI_ERROR (Status)) {
    Found = Status;
    goto Done;
  }
  if (!PartitionValidMbr (Mbr, LastBlock)) {
    goto Done;
  }
  //
  // We have a valid mbr - add each partition
  //
  //
  // Get starting and ending LBA of the parent block device.
  //
  LastDevicePathNode = NULL;
  ZeroMem (&ParentHdDev, sizeof (ParentHdDev));
  DevicePathNode = DevicePath;
  while (!IsDevicePathEnd (DevicePathNode)) {
    LastDevicePathNode  = DevicePathNode;
    DevicePathNode      = NextDevicePathNode (DevicePathNode);
  }

  if (LastDevicePathNode != NULL) {
    if (DevicePathType (LastDevicePathNode) == MEDIA_DEVICE_PATH &&
        DevicePathSubType (LastDevicePathNode) == MEDIA_HARDDRIVE_DP
        ) {
      CopyMem (&ParentHdDev, LastDevicePathNode, sizeof (ParentHdDev));
    } else {
      LastDevicePathNode = NULL;
    }
  }

  PartitionNumber = 1;

  ZeroMem (&HdDev, sizeof (HdDev));
  HdDev.Header.Type     = MEDIA_DEVICE_PATH;
  HdDev.Header.SubType  = MEDIA_HARDDRIVE_DP;
  SetDevicePathNodeLength (&HdDev.Header, sizeof (HdDev));
  HdDev.MBRType         = MBR_TYPE_PCAT;
  HdDev.SignatureType   = SIGNATURE_TYPE_MBR;

  if (LastDevicePathNode == NULL) {
    //
//.........这里部分代码省略.........

/**
  Worker function that truncate a file specified by its name to a given size.

  @param[in]  FileName  The Null-terminated string of the name of the file to be opened.
  @param[in]  Size      The target size for the file.

  @retval  EFI_SUCCESS       The file was truncated.
  @retval  EFI_DEVICE_ERROR  The last issued semi-hosting operation failed.

**/
STATIC
EFI_STATUS
TruncateFile (
  IN CHAR8  *FileName,
  IN UINTN   Size
  )
{
  EFI_STATUS     Status;
  RETURN_STATUS  Return;
  UINTN          FileHandle;
  UINT8          *Buffer;
  UINTN          Remaining;
  UINTN          Read;
  UINTN          ToRead;

  Status     = EFI_DEVICE_ERROR;
  FileHandle = 0;
  Buffer     = NULL;

  Return = SemihostFileOpen (
             FileName,
             SEMIHOST_FILE_MODE_READ | SEMIHOST_FILE_MODE_BINARY,
             &FileHandle
             );
  if (RETURN_ERROR (Return)) {
    goto Error;
  }

  Buffer = AllocatePool (Size);
  if (Buffer == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto Error;
  }

  Read = 0;
  Remaining = Size;
  while (Remaining > 0) {
    ToRead = Remaining;
    Return = SemihostFileRead (FileHandle, &ToRead, Buffer + Read);
    if (RETURN_ERROR (Return)) {
      goto Error;
    }
    Remaining -= ToRead;
    Read      += ToRead;
  }

  Return = SemihostFileClose (FileHandle);
  FileHandle = 0;
  if (RETURN_ERROR (Return)) {
    goto Error;
  }

  Return = SemihostFileOpen (
             FileName,
             SEMIHOST_FILE_MODE_WRITE | SEMIHOST_FILE_MODE_BINARY,
             &FileHandle
             );
  if (RETURN_ERROR (Return)) {
    goto Error;
  }

  if (Size > 0) {
    Return = SemihostFileWrite (FileHandle, &Size, Buffer);
    if (RETURN_ERROR (Return)) {
      goto Error;
    }
  }

  Status = EFI_SUCCESS;

Error:

  if (FileHandle != 0) {
    SemihostFileClose (FileHandle);
  }
  if (Buffer != NULL) {
    FreePool (Buffer);
  }

  return (Status);

}

/**
  Set or update a HTTP header with the field name and corresponding value.

  @param[in]  HttpIoHeader       Point to the HTTP header holder.
  @param[in]  FieldName          Null terminated string which describes a field name.
  @param[in]  FieldValue         Null terminated string which describes the corresponding field value.

  @retval  EFI_SUCCESS           The HTTP header has been set or updated.
  @retval  EFI_INVALID_PARAMETER Any input parameter is invalid.
  @retval  EFI_OUT_OF_RESOURCES  Insufficient resource to complete the operation.
  @retval  Other                 Unexpected error happened.
  
**/
EFI_STATUS
HttpBootSetHeader (
  IN  HTTP_IO_HEADER       *HttpIoHeader,
  IN  CHAR8                *FieldName,
  IN  CHAR8                *FieldValue
  )
{
  EFI_HTTP_HEADER       *Header;
  UINTN                 StrSize;
  CHAR8                 *NewFieldValue;
  
  if (HttpIoHeader == NULL || FieldName == NULL || FieldValue == NULL) {
    return EFI_INVALID_PARAMETER;
  }

  Header = HttpFindHeader (HttpIoHeader->HeaderCount, HttpIoHeader->Headers, FieldName);
  if (Header == NULL) {
    //
    // Add a new header.
    //
    if (HttpIoHeader->HeaderCount >= HttpIoHeader->MaxHeaderCount) {
      return EFI_OUT_OF_RESOURCES;
    }
    Header = &HttpIoHeader->Headers[HttpIoHeader->HeaderCount];

    StrSize = AsciiStrSize (FieldName);
    Header->FieldName = AllocatePool (StrSize);
    if (Header->FieldName == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
    CopyMem (Header->FieldName, FieldName, StrSize);
    Header->FieldName[StrSize -1] = '\0';

    StrSize = AsciiStrSize (FieldValue);
    Header->FieldValue = AllocatePool (StrSize);
    if (Header->FieldValue == NULL) {
      FreePool (Header->FieldName);
      return EFI_OUT_OF_RESOURCES;
    }
    CopyMem (Header->FieldValue, FieldValue, StrSize);
    Header->FieldValue[StrSize -1] = '\0';

    HttpIoHeader->HeaderCount++;
  } else {
    //
    // Update an existing one.
    //
    StrSize = AsciiStrSize (FieldValue);
    NewFieldValue = AllocatePool (StrSize);
    if (NewFieldValue == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }
    CopyMem (NewFieldValue, FieldValue, StrSize);
    NewFieldValue[StrSize -1] = '\0';
    
    if (Header->FieldValue != NULL) {
      FreePool (Header->FieldValue);
    }
    Header->FieldValue = NewFieldValue;
  }

  return EFI_SUCCESS;
}

//.........这里部分代码省略.........
          InitrdPath = AppendDevicePath (TempInitrdPath, (CONST EFI_DEVICE_PATH_PROTOCOL *)InitrdPathNodes);
          FreePool (TempInitrdPath);
          // Free the InitrdPathNodes created by Support->CreateDevicePathNode()
          FreePool (InitrdPathNodes);
          if (InitrdPath == NULL) {
            Status = EFI_OUT_OF_RESOURCES;
            goto EXIT;
          }
          InitrdSize = GetDevicePathSize (InitrdPath);
        } else {
          InitrdPath = NULL;
        }
      }
    } else {
      InitrdSize = 0;
    }

    Print(L"Arguments to pass to the binary: ");
    if (CmdLineSize > 0) {
      AsciiStrnCpy (CmdLine, (CONST CHAR8*)(LinuxArguments + 1), sizeof (CmdLine));
      CmdLine[sizeof (CmdLine) - 1] = '\0';
    } else {
      CmdLine[0] = '\0';
    }
    Status = EditHIInputAscii (CmdLine, BOOT_DEVICE_OPTION_MAX);
    if (EFI_ERROR(Status)) {
      Status = EFI_ABORTED;
      goto FREE_DEVICE_PATH;
    }

    CmdLineSize = AsciiStrSize (CmdLine);

    OptionalDataSize = sizeof(ARM_BDS_LOADER_ARGUMENTS) + CmdLineSize + InitrdSize;
    BootArguments = (ARM_BDS_LOADER_ARGUMENTS*)AllocatePool (OptionalDataSize);
    BootArguments->LinuxArguments.CmdLineSize = CmdLineSize;
    BootArguments->LinuxArguments.InitrdSize = InitrdSize;
    CopyMem (&BootArguments->LinuxArguments + 1, CmdLine, CmdLineSize);
    CopyMem ((VOID*)((UINTN)(&BootArguments->LinuxArguments + 1) + CmdLineSize), InitrdPath, InitrdSize);

    OptionalData = (UINT8*)BootArguments;
  } else {
    Print (L"Arguments to pass to the EFI Application: ");

    if (BootOption->OptionalDataSize > 0) {
      IsPrintable = IsPrintableString (BootOption->OptionalData, &IsUnicode);
      if (IsPrintable) {
          //
          // The size in bytes of the string, final zero included, should
          // be equal to or at least lower than "BootOption->OptionalDataSize"
          // and the "IsPrintableString()" has already tested that the length
          // in number of characters is smaller than BOOT_DEVICE_OPTION_MAX,
          // final '\0' included. We can thus copy the string for editing
          // using "CopyMem()". Furthermore, note that in the case of an Unicode
          // string "StrnCpy()" and "StrCpy()" can not be used to copy the
          // string because the data pointed to by "BootOption->OptionalData"
          // is not necessarily 2-byte aligned.
          //
        if (IsUnicode) {
          CopyMem (
            UnicodeCmdLine, BootOption->OptionalData,
            MIN (sizeof (UnicodeCmdLine),
                 BootOption->OptionalDataSize)
            );
        } else {
          CopyMem (
            CmdLine, BootOption->OptionalData,

//
// TDS 3.4.3
//
EFI_STATUS
DevicePathUtilitiesAppendDevicePathConformanceTest (
  IN EFI_BB_TEST_PROTOCOL       *This,
  IN VOID                       *ClientInterface,
  IN EFI_TEST_LEVEL             TestLevel,
  IN EFI_HANDLE                 SupportHandle
  )
{
  EFI_STANDARD_TEST_LIBRARY_PROTOCOL  *StandardLib;
  EFI_STATUS                          Status;
  EFI_DEVICE_PATH_UTILITIES_PROTOCOL  *DevicePathUtilities;
  EFI_TEST_ASSERTION                  AssertionType;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath1;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath2;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath3;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath4;
  UINTN                               DevicePathLen1;
  UINTN                               DevicePathLen2;
  UINTN                               DevicePathLen3;
  //
  // Get the Standard Library Interface
  //
  Status = gtBS->HandleProtocol (
                  SupportHandle,
                  &gEfiStandardTestLibraryGuid,
                  &StandardLib
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }

  DevicePathUtilities = (EFI_DEVICE_PATH_UTILITIES_PROTOCOL *) ClientInterface;

  //
  // TDS 3.4.3.2.1
  //
  pDevicePath1 = (EFI_DEVICE_PATH *) AllocatePool (END_DEVICE_PATH_LENGTH);
  SetDevicePathEndNode (pDevicePath1);

  pDevicePath3  = DevicePathUtilities->CreateDeviceNode (USBNodeType, USBNodeSubType, USBNodeLength);
  pDevicePath4  = DevicePathUtilities->AppendDeviceNode (pDevicePath1, pDevicePath3);
  FreePool (pDevicePath1);
  FreePool (pDevicePath3);
  DevicePathLen2  = DevicePathUtilities->GetDevicePathSize (pDevicePath4);

  pDevicePath1    = DevicePathUtilities->AppendDevicePath (NULL, pDevicePath4);
  FreePool (pDevicePath4);
  DevicePathLen3 = DevicePathUtilities->GetDevicePathSize (pDevicePath1);
  FreePool (pDevicePath1);

  if (DevicePathLen2 == DevicePathLen3) {
    AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
  }

  StandardLib->RecordAssertion (
                StandardLib,
                AssertionType,
                gDevicePathUtilitiesBBTestFunctionAssertionGuid059,
                L"EFI_DEVICE_PATH_UTILITIES_PROTOCOL - AppendDevicePath should ignore Src1 when it is set NULL",
                L"%a:%d:Status - %r",
                __FILE__,
                (UINTN)__LINE__
                );

  //
  // TDS 3.4.3.2.2
  //
  pDevicePath1 = (EFI_DEVICE_PATH *) AllocatePool (END_DEVICE_PATH_LENGTH);
  if (pDevicePath1 == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }
  SetDevicePathEndNode (pDevicePath1);
  DevicePathLen1  = DevicePathUtilities->GetDevicePathSize (pDevicePath1);

  pDevicePath2    = DevicePathUtilities->CreateDeviceNode (PCIRootNodeType, PCIRootNodeSubType, PCIRootNodeLength);
  pDevicePath3    = DevicePathUtilities->AppendDeviceNode (pDevicePath1, pDevicePath2);
  FreePool (pDevicePath1);
  FreePool (pDevicePath2);

  pDevicePath1  = DevicePathUtilities->CreateDeviceNode (PCINodeType, PCINodeSubType, PCINodeLength);
  pDevicePath2  = DevicePathUtilities->AppendDeviceNode (pDevicePath3, pDevicePath1);
  FreePool (pDevicePath3);
  FreePool (pDevicePath1);
  DevicePathLen1  = DevicePathUtilities->GetDevicePathSize (pDevicePath2);

  pDevicePath1    = DevicePathUtilities->AppendDevicePath (pDevicePath2, NULL);
  FreePool (pDevicePath2);
  DevicePathLen3 = DevicePathUtilities->GetDevicePathSize (pDevicePath1);
  FreePool (pDevicePath1);

  if (DevicePathLen1 == DevicePathLen3) {
    AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
//.........这里部分代码省略.........

//
// TDS 3.4.4
//
EFI_STATUS
DevicePathUtilitiesAppendDevicePathInstanceConformanceTest (
  IN EFI_BB_TEST_PROTOCOL       *This,
  IN VOID                       *ClientInterface,
  IN EFI_TEST_LEVEL             TestLevel,
  IN EFI_HANDLE                 SupportHandle
  )
{
  EFI_STANDARD_TEST_LIBRARY_PROTOCOL  *StandardLib;
  EFI_STATUS                          Status;
  EFI_DEVICE_PATH_UTILITIES_PROTOCOL  *DevicePathUtilities;
  EFI_TEST_ASSERTION                  AssertionType;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath1;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath2;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath3;

  //
  // Get the Standard Library Interface
  //
  Status = gtBS->HandleProtocol (
                  SupportHandle,
                  &gEfiStandardTestLibraryGuid,
                  &StandardLib
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }

  DevicePathUtilities = (EFI_DEVICE_PATH_UTILITIES_PROTOCOL *) ClientInterface;

  //
  // TDS 3.4.4.2.1
  //
  pDevicePath1 = (EFI_DEVICE_PATH *) AllocatePool (END_DEVICE_PATH_LENGTH);
  if (pDevicePath1 == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }
  SetDevicePathEndNode (pDevicePath1);

  pDevicePath2  = DevicePathUtilities->CreateDeviceNode (PCIRootNodeType, PCIRootNodeSubType, PCIRootNodeLength);
  pDevicePath3  = DevicePathUtilities->AppendDeviceNode (pDevicePath1, pDevicePath2);
  FreePool (pDevicePath1);
  FreePool (pDevicePath2);

  pDevicePath1  = DevicePathUtilities->CreateDeviceNode (PCINodeType, PCINodeSubType, PCINodeLength);
  pDevicePath2  = DevicePathUtilities->AppendDeviceNode (pDevicePath3, pDevicePath1);
  FreePool (pDevicePath3);
  FreePool (pDevicePath1);

  pDevicePath1 = DevicePathUtilities->AppendDevicePathInstance (pDevicePath2, NULL);
  FreePool (pDevicePath2);

  if (pDevicePath1 == NULL) {
    AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
  }

  StandardLib->RecordAssertion (
                StandardLib,
                AssertionType,
                gDevicePathUtilitiesBBTestFunctionAssertionGuid062,
                L"EFI_DEVICE_PATH_UTILITIES_PROTOCOL - AppendDevicePathInstance should not succeed with DevicePathInstance set to be NULL",
                L"%a:%d:Status - %r",
                __FILE__,
                (UINTN)__LINE__
                );

  return EFI_SUCCESS;
}

/**
  Digests the Payload and store the result into the OutData.

  This function calls relevant Hash interface from CryptoLib according to
  the input alogrithm ID. It computes all datas from InDataFragment and output
  the result into the OutData buffer. If the OutDataSize is larger than the related
  Hash alogrithm output size, return EFI_INVALID_PARAMETER.

  @param[in]      AlgorithmId     The authentication Identification.
  @param[in]      InDataFragment  A list contains all data to be authenticated.
  @param[in]      FragmentCount   The size of the InDataFragment.
  @param[out]     OutData         For in, the buffer to receive the output data.
                                  For out, the buffer contains the authenticated data.
  @param[in]      OutDataSize     The size of the buffer of OutData.

  @retval EFI_UNSUPPORTED       If the AuthAlg is not in the support list.
  @retval EFI_SUCCESS           Authenticated the payload successfully.
  @retval EFI_INVALID_PARAMETER If the OutDataSize is larger than the related Hash
                                algorithm could handle.
  @retval otherwise             Authentication of the payload failed.

**/
EFI_STATUS
IpSecCryptoIoHash (
  IN     CONST UINT8              AlgorithmId,
  IN           HASH_DATA_FRAGMENT *InDataFragment,
  IN           UINTN              FragmentCount,
     OUT       UINT8              *OutData,
  IN           UINTN              OutDataSize
  )
{
  UINTN        ContextSize;
  UINTN        Index;
  UINT8        FragmentIndex;
  UINT8        *HashContext;
  EFI_STATUS   Status;
  UINT8        *OutHashData;
  UINTN        OutHashSize;

  Status      = EFI_UNSUPPORTED;
  OutHashData = NULL;

  OutHashSize = IpSecGetHmacDigestLength (AlgorithmId);
  //
  // If the expected hash data size is larger than the related Hash algorithm
  // output length, return EFI_INVALID_PARAMETER.
  //
  if (OutDataSize > OutHashSize) {
    return EFI_INVALID_PARAMETER;
  }
  OutHashData = AllocatePool (OutHashSize);
  if (OutHashData == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }

  switch (AlgorithmId) {

  case IKE_AALG_NONE:
  case IKE_AALG_NULL:
    return EFI_SUCCESS;

  case IKE_AALG_SHA1HMAC:
    Index = IpSecGetIndexFromAuthList (AlgorithmId);
    if (Index == -1) {
      return Status;
    }
    //
    // Get Context Size
    //
    ContextSize = mIpsecHashAlgorithmList[Index].HashGetContextSize();
    HashContext = AllocateZeroPool (ContextSize);
    if (HashContext == NULL) {
      Status = EFI_OUT_OF_RESOURCES;
      goto Exit;
    }

    //
    // Initiate Hash context and hash the input data.
    //
    if (mIpsecHashAlgorithmList[Index].HashInitiate(HashContext)) {
      for (FragmentIndex = 0; FragmentIndex < FragmentCount; FragmentIndex++) {
        if (!mIpsecHashAlgorithmList[Index].HashUpdate (
                HashContext,
                InDataFragment[FragmentIndex].Data,
                InDataFragment[FragmentIndex].DataSize
                )
          ) {
          goto Exit;
        }
      }
      if (mIpsecHashAlgorithmList[Index].HashFinal (HashContext, OutHashData)) {
        //
        // In some cases, like the Icv computing, the Icv size might be less than
        // the key length size, so copy the part of hash data to the OutData.
        //
        CopyMem (OutData, OutHashData, OutDataSize);
        Status = EFI_SUCCESS;
      }

      goto Exit;
//.........这里部分代码省略.........

//
// TDS 3.4.2
//
EFI_STATUS
DevicePathUtilitiesAppendDeviceNodeConformanceTest (
  IN EFI_BB_TEST_PROTOCOL       *This,
  IN VOID                       *ClientInterface,
  IN EFI_TEST_LEVEL             TestLevel,
  IN EFI_HANDLE                 SupportHandle
  )
{
  EFI_STANDARD_TEST_LIBRARY_PROTOCOL  *StandardLib;
  EFI_STATUS                          Status;
  EFI_DEVICE_PATH_UTILITIES_PROTOCOL  *DevicePathUtilities;
  EFI_TEST_ASSERTION                  AssertionType;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath1;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath2;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath3;
  EFI_DEVICE_PATH_PROTOCOL            *pDevicePath4;

  //
  // Get the Standard Library Interface
  //
  Status = gtBS->HandleProtocol (
                  SupportHandle,
                  &gEfiStandardTestLibraryGuid,
                  &StandardLib
                  );

  if (EFI_ERROR (Status)) {
    return Status;
  }

  DevicePathUtilities = (EFI_DEVICE_PATH_UTILITIES_PROTOCOL *) ClientInterface;

  //
  // TDS 3.4.2.2.1
  //
  pDevicePath1 = (EFI_DEVICE_PATH *) AllocatePool (END_DEVICE_PATH_LENGTH);
  if (pDevicePath1 == NULL) {
    return EFI_OUT_OF_RESOURCES;
  }
  SetDevicePathEndNode (pDevicePath1);

  pDevicePath2  = DevicePathUtilities->CreateDeviceNode (PCIRootNodeType, PCIRootNodeSubType, PCIRootNodeLength);
  pDevicePath4  = DevicePathUtilities->AppendDeviceNode (pDevicePath1, pDevicePath2);

  pDevicePath3  = DevicePathUtilities->AppendDeviceNode (NULL, pDevicePath2);
  if ((pDevicePath3 != NULL) && (EfiCompareMem(pDevicePath3, pDevicePath4, DevicePathUtilities->GetDevicePathSize (pDevicePath3)) == 0)) {
    AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
  }

  if (pDevicePath3 != NULL) {
    FreePool (pDevicePath3);
  }

  StandardLib->RecordAssertion (
                StandardLib,
                AssertionType,
                gDevicePathUtilitiesBBTestFunctionAssertionGuid054,
                L"EFI_DEVICE_PATH_UTILITIES_PROTOCOL - AppendDeviceNode should return a copy of DeviceNode if DevicePath is NULL",
                L"%a:%d",
                __FILE__,
                (UINTN)__LINE__
                );

  //
  // TDS 3.4.2.2.2
  //
  pDevicePath3 = DevicePathUtilities->AppendDeviceNode (pDevicePath4, NULL);
  if ((pDevicePath3 != NULL) && (EfiCompareMem(pDevicePath3, pDevicePath4, DevicePathUtilities->GetDevicePathSize (pDevicePath3)) == 0)) {
    AssertionType = EFI_TEST_ASSERTION_PASSED;
  } else {
    AssertionType = EFI_TEST_ASSERTION_FAILED;
  }

  if (pDevicePath2 != NULL) {
    FreePool(pDevicePath2);
  }
  if (pDevicePath3 != NULL) {
    FreePool(pDevicePath3);
  }
  if (pDevicePath4 != NULL) {
    FreePool(pDevicePath4);
  }

  StandardLib->RecordAssertion (
                StandardLib,
                AssertionType,
                gDevicePathUtilitiesBBTestFunctionAssertionGuid055,
                L"EFI_DEVICE_PATH_UTILITIES_PROTOCOL - AppendDeviceNode should return a copy of DevicePath if DeviceNode is NULL",
                L"%a:%d",
                __FILE__,
                (UINTN)__LINE__
                );

  pDevicePath3 = DevicePathUtilities->AppendDeviceNode (NULL, NULL);
  if ((pDevicePath3 != NULL) && (EfiCompareMem(pDevicePath3, pDevicePath1, DevicePathUtilities->GetDevicePathSize (pDevicePath3)) == 0)) {
//.........这里部分代码省略.........

/**
  Append a capsule header on top of current image.
  This function follows Windows UEFI Firmware Update Platform document.

  @retval EFI_SUCCESS            The capsule header is appended.
  @retval EFI_UNSUPPORTED        Input parameter is not valid.
  @retval EFI_OUT_OF_RESOURCES   No enough resource to append capsule header.
**/
EFI_STATUS
CreateNestedFmp (
  VOID
  )
{
  CHAR16                                        *OutputCapsuleName;
  VOID                                          *CapsuleBuffer;
  UINTN                                         FileSize;
  CHAR16                                        *CapsuleName;
  UINT8                                         *FullCapsuleBuffer;
  UINTN                                         FullCapsuleBufferSize;
  EFI_CAPSULE_HEADER                            *NestedCapsuleHeader;
  EFI_GUID                                      *ImageTypeId;
  UINT32                                        FwType;
  EFI_STATUS                                    Status;

  if (Argc != 5) {
    Print(L"CapsuleApp: Incorrect parameter count.\n");
    return EFI_UNSUPPORTED;
  }

  if (StrCmp(Argv[3], L"-O") != 0) {
    Print(L"CapsuleApp: NO output capsule name.\n");
    return EFI_UNSUPPORTED;
  }
  OutputCapsuleName = Argv[4];

  CapsuleBuffer = NULL;
  FileSize = 0;
  FullCapsuleBuffer = NULL;

  CapsuleName = Argv[2];
  Status = ReadFileToBuffer(CapsuleName, &FileSize, &CapsuleBuffer);
  if (EFI_ERROR(Status)) {
    Print(L"CapsuleApp: Capsule image (%s) is not found.\n", CapsuleName);
    goto Done;
  }

  ImageTypeId = GetCapsuleImageTypeId(CapsuleBuffer);
  if (ImageTypeId == NULL) {
    Print(L"CapsuleApp: Capsule ImageTypeId is not found.\n");
    goto Done;
  }
  FwType = GetEsrtFwType(ImageTypeId);
  if ((FwType != ESRT_FW_TYPE_SYSTEMFIRMWARE) && (FwType != ESRT_FW_TYPE_DEVICEFIRMWARE)) {
    Print(L"CapsuleApp: Capsule FwType is invalid.\n");
    goto Done;
  }

  FullCapsuleBufferSize = NESTED_CAPSULE_HEADER_SIZE + FileSize;
  FullCapsuleBuffer = AllocatePool(FullCapsuleBufferSize);
  if (FullCapsuleBuffer == NULL) {
    Print(L"CapsuleApp: Capsule Buffer size (0x%x) too big.\n", FullCapsuleBufferSize);
    Status = EFI_OUT_OF_RESOURCES;
    goto Done;
  }

  NestedCapsuleHeader = (EFI_CAPSULE_HEADER *)FullCapsuleBuffer;
  ZeroMem(NestedCapsuleHeader, NESTED_CAPSULE_HEADER_SIZE);
  CopyGuid(&NestedCapsuleHeader->CapsuleGuid, ImageTypeId);
  NestedCapsuleHeader->HeaderSize = NESTED_CAPSULE_HEADER_SIZE;
  NestedCapsuleHeader->Flags = (FwType == ESRT_FW_TYPE_SYSTEMFIRMWARE) ? SYSTEM_FIRMWARE_FLAG : DEVICE_FIRMWARE_FLAG;
  NestedCapsuleHeader->CapsuleImageSize = (UINT32)FullCapsuleBufferSize;

  CopyMem((UINT8 *)NestedCapsuleHeader + NestedCapsuleHeader->HeaderSize, CapsuleBuffer, FileSize);

  Status = WriteFileFromBuffer(OutputCapsuleName, FullCapsuleBufferSize, FullCapsuleBuffer);
  Print(L"CapsuleApp: Write %s %r\n", OutputCapsuleName, Status);

Done:
  if (CapsuleBuffer != NULL) {
    FreePool(CapsuleBuffer);
  }

  if (FullCapsuleBuffer != NULL) {
    FreePool(FullCapsuleBuffer);
  }

  return Status;
}

/**
  Create UX capsule.

  @retval EFI_SUCCESS            The capsule header is appended.
  @retval EFI_UNSUPPORTED        Input parameter is not valid.
  @retval EFI_OUT_OF_RESOURCES   No enough resource to create UX capsule.
**/
EFI_STATUS
CreateBmpFmp (
  VOID
  )
{
  CHAR16                                        *OutputCapsuleName;
  VOID                                          *BmpBuffer;
  UINTN                                         FileSize;
  CHAR16                                        *BmpName;
  UINT8                                         *FullCapsuleBuffer;
  UINTN                                         FullCapsuleBufferSize;
  EFI_DISPLAY_CAPSULE                           *DisplayCapsule;
  EFI_STATUS                                    Status;
  EFI_GRAPHICS_OUTPUT_PROTOCOL                  *Gop;
  EFI_GRAPHICS_OUTPUT_MODE_INFORMATION          *Info;
  EFI_GRAPHICS_OUTPUT_BLT_PIXEL                 *GopBlt;
  UINTN                                         GopBltSize;
  UINTN                                         Height;
  UINTN                                         Width;

  Status = gBS->LocateProtocol(&gEfiGraphicsOutputProtocolGuid, NULL, (VOID **)&Gop);
  if (EFI_ERROR(Status)) {
    Print(L"CapsuleApp: NO GOP is found.\n");
    return EFI_UNSUPPORTED;
  }
  Info = Gop->Mode->Info;
  Print(L"Current GOP: Mode - %d, ", Gop->Mode->Mode);
  Print(L"HorizontalResolution - %d, ", Info->HorizontalResolution);
  Print(L"VerticalResolution - %d\n", Info->VerticalResolution);
  // HorizontalResolution >= BMP_IMAGE_HEADER.PixelWidth
  // VerticalResolution   >= BMP_IMAGE_HEADER.PixelHeight

  if (Argc != 5) {
    Print(L"CapsuleApp: Incorrect parameter count.\n");
    return EFI_UNSUPPORTED;
  }

  if (StrCmp(Argv[3], L"-O") != 0) {
    Print(L"CapsuleApp: NO output capsule name.\n");
    return EFI_UNSUPPORTED;
  }
  OutputCapsuleName = Argv[4];

  BmpBuffer = NULL;
  FileSize = 0;
  FullCapsuleBuffer = NULL;

  BmpName = Argv[2];
  Status = ReadFileToBuffer(BmpName, &FileSize, &BmpBuffer);
  if (EFI_ERROR(Status)) {
    Print(L"CapsuleApp: BMP image (%s) is not found.\n", BmpName);
    goto Done;
  }

  GopBlt = NULL;
  Status = TranslateBmpToGopBlt (
             BmpBuffer,
             FileSize,
             &GopBlt,
             &GopBltSize,
             &Height,
             &Width
             );
  if (EFI_ERROR(Status)) {
    Print(L"CapsuleApp: BMP image (%s) is not valid.\n", BmpName);
    goto Done;
  }
  if (GopBlt != NULL) {
    FreePool (GopBlt);
  }
  Print(L"BMP image (%s), Width - %d, Height - %d\n", BmpName, Width, Height);

  if (Height > Info->VerticalResolution) {
    Status = EFI_INVALID_PARAMETER;
    Print(L"CapsuleApp: BMP image (%s) height is larger than current resolution.\n", BmpName);
    goto Done;
  }
  if (Width > Info->HorizontalResolution) {
    Status = EFI_INVALID_PARAMETER;
    Print(L"CapsuleApp: BMP image (%s) width is larger than current resolution.\n", BmpName);
    goto Done;
  }

  FullCapsuleBufferSize = sizeof(EFI_DISPLAY_CAPSULE) + FileSize;
  FullCapsuleBuffer = AllocatePool(FullCapsuleBufferSize);
  if (FullCapsuleBuffer == NULL) {
    Print(L"CapsuleApp: Capsule Buffer size (0x%x) too big.\n", FullCapsuleBufferSize);
    Status = EFI_OUT_OF_RESOURCES;
    goto Done;
  }

  DisplayCapsule = (EFI_DISPLAY_CAPSULE *)FullCapsuleBuffer;
  CopyGuid(&DisplayCapsule->CapsuleHeader.CapsuleGuid, &gWindowsUxCapsuleGuid);
//.........这里部分代码省略.........

/**
  Create the Boot####, Driver####, SysPrep####, PlatformRecovery#### variable
  from the load option.

  @param  LoadOption      Pointer to the load option.

  @retval EFI_SUCCESS     The variable was created.
  @retval Others          Error status returned by RT->SetVariable.
**/
EFI_STATUS
EFIAPI
EfiBootManagerLoadOptionToVariable (
  IN CONST EFI_BOOT_MANAGER_LOAD_OPTION     *Option
  )
{
  EFI_STATUS                       Status;
  UINTN                            VariableSize;
  UINT8                            *Variable;
  UINT8                            *Ptr;
  CHAR16                           OptionName[BM_OPTION_NAME_LEN];
  CHAR16                           *Description;
  CHAR16                           NullChar;
  EDKII_VARIABLE_LOCK_PROTOCOL     *VariableLock;
  UINT32                           VariableAttributes;

  if ((Option->OptionNumber == LoadOptionNumberUnassigned) ||
      (Option->FilePath == NULL) ||
      ((UINT32) Option->OptionType >= LoadOptionTypeMax)
     ) {
    return EFI_INVALID_PARAMETER;
  }

  //
  // Convert NULL description to empty description
  //
  NullChar    = L'\0';
  Description = Option->Description;
  if (Description == NULL) {
    Description = &NullChar;
  }

  /*
  UINT32                      Attributes;
  UINT16                      FilePathListLength;
  CHAR16                      Description[];
  EFI_DEVICE_PATH_PROTOCOL    FilePathList[];
  UINT8                       OptionalData[];
TODO: FilePathList[] IS:
A packed array of UEFI device paths.  The first element of the
array is a device path that describes the device and location of the
Image for this load option.  The FilePathList[0] is specific
to the device type.  Other device paths may optionally exist in the
FilePathList, but their usage is OSV specific. Each element
in the array is variable length, and ends at the device path end
structure.
  */
  VariableSize = sizeof (Option->Attributes)
               + sizeof (UINT16)
               + StrSize (Description)
               + GetDevicePathSize (Option->FilePath)
               + Option->OptionalDataSize;

  Variable     = AllocatePool (VariableSize);
  ASSERT (Variable != NULL);

  Ptr             = Variable;
  WriteUnaligned32 ((UINT32 *) Ptr, Option->Attributes);
  Ptr            += sizeof (Option->Attributes);

  WriteUnaligned16 ((UINT16 *) Ptr, (UINT16) GetDevicePathSize (Option->FilePath));
  Ptr            += sizeof (UINT16);

  CopyMem (Ptr, Description, StrSize (Description));
  Ptr            += StrSize (Description);

  CopyMem (Ptr, Option->FilePath, GetDevicePathSize (Option->FilePath));
  Ptr            += GetDevicePathSize (Option->FilePath);

  CopyMem (Ptr, Option->OptionalData, Option->OptionalDataSize);

  UnicodeSPrint (OptionName, sizeof (OptionName), L"%s%04x", mBmLoadOptionName[Option->OptionType], Option->OptionNumber);

  VariableAttributes = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS | EFI_VARIABLE_NON_VOLATILE;
  if (Option->OptionType == LoadOptionTypePlatformRecovery) {
    //
    // Lock the PlatformRecovery####
    //
    Status = gBS->LocateProtocol (&gEdkiiVariableLockProtocolGuid, NULL, (VOID **) &VariableLock);
    if (!EFI_ERROR (Status)) {
      Status = VariableLock->RequestToLock (VariableLock, OptionName, &gEfiGlobalVariableGuid);
      ASSERT_EFI_ERROR (Status);
    }
    VariableAttributes = EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS;
  }

  Status = gRT->SetVariable (
                  OptionName,
                  &gEfiGlobalVariableGuid,
                  VariableAttributes,
                  VariableSize,
//.........这里部分代码省略.........

/**
  Restore Partition Table to its alternate place
  (Primary -> Backup or Backup -> Primary).

  @param[in]  BlockIo     Parent BlockIo interface.
  @param[in]  DiskIo      Disk Io Protocol.
  @param[in]  PartHeader  Partition table header structure.

  @retval TRUE      Restoring succeeds
  @retval FALSE     Restoring failed

**/
BOOLEAN
PartitionRestoreGptTable (
  IN  EFI_BLOCK_IO_PROTOCOL       *BlockIo,
  IN  EFI_DISK_IO_PROTOCOL        *DiskIo,
  IN  EFI_PARTITION_TABLE_HEADER  *PartHeader
  )
{
  EFI_STATUS                  Status;
  UINTN                       BlockSize;
  EFI_PARTITION_TABLE_HEADER  *PartHdr;
  EFI_LBA                     PEntryLBA;
  UINT8                       *Ptr;
  UINT32                      MediaId;

  PartHdr   = NULL;
  Ptr       = NULL;

  BlockSize = BlockIo->Media->BlockSize;
  MediaId   = BlockIo->Media->MediaId;

  PartHdr   = AllocateZeroPool (BlockSize);

  if (PartHdr == NULL) {
    DEBUG ((EFI_D_ERROR, "Allocate