本文整理汇总了C++中AddValue函数的典型用法代码示例。如果您正苦于以下问题：C++ AddValue函数的具体用法？C++ AddValue怎么用？C++ AddValue使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了AddValue函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: AddValue
void wxGISGPStringDomain::AddString(const wxString &soStr, const wxString &soName)
{
if(soName.IsEmpty())
AddValue(wxVariant(soStr), soStr);
else
AddValue(wxVariant(soStr), soName);
}
开发者ID:GimpoByte，项目名称:nextgismanager，代码行数:7，代码来源:gpdomain.cpp
示例2: AddValue
//---------------------------------------------------------------------------
void __fastcall CUBRelay::GetDump(void *&Dump, DWORD &DumpSize)
{
CStdElement::GetDump(Dump, DumpSize);
AddValue(Dump, DumpSize, &B, sizeof(long double));
AddValue(Dump, DumpSize, &dX, sizeof(long double));
AddValue(Dump, DumpSize, &dY, sizeof(long double));
}
开发者ID:Pala4，项目名称:ModelCad，代码行数:8，代码来源:MCUBRelay.cpp
示例3: sprintf
bool plKeysAndValues::AddValue(const std::string & key, double value, KAddValueMode mode)
{
char buf[30];
sprintf(buf, "%f", value);
std::string v(buf);
return AddValue(key,v,mode);
}
开发者ID:branan，项目名称:Plasma-nobink，代码行数:7，代码来源:plKeysAndValues.cpp
示例4: GetValue
HRESULT CXFields::AddField(LPCWSTR key, short type, __int64 fmt)
{
int i;
if(!isVBType(type) && type != VT_DISPATCH)
return E_INVALIDARG;
if(type == VT_DISPATCH)
type = VT_USERDEFINED;
for(i = 0; i < (int)GetCount(); i ++)
if(!GetValue(i)->m_strName.CompareNoCase(key))
{
GetValue(i)->m_nType = type;
GetValue(i)->m_nFormat = fmt;
return S_OK;
}
CXComPtr<CXField> pField;
pField.CreateObject();
pField->m_strName = key;
pField->m_nType = type;
pField->m_nFormat = fmt;
AddValue(pField);
return S_OK;
}
开发者ID:JimLiu，项目名称:asptools，代码行数:30，代码来源:XRecords.cpp
示例5: sprintf
bool plConfigInfo::AddValue(const std::string & section, const std::string & key, double value, KAddValueMode mode)
{
char buf[30];
sprintf(buf, "%f", value);
std::string v(buf);
return AddValue(section,key,v,mode);
}
开发者ID:branan，项目名称:Plasma-nobink，代码行数:7，代码来源:plConfigInfo.cpp
示例6: WindowNameFilter
WindowNameFilter(unsigned int type, const unsigned int* vec, size_t length) : RemapFilterBase(type) {
targets_.reserve(length);
for (size_t i = 0; i < length; ++i) {
targets_.push_back(AddValue(vec[i]));
}
}
开发者ID:andyvand，项目名称:Karabiner，代码行数:7，代码来源:WindowNameFilter.hpp
示例7: Reset
//==============================================================================
/// Configures the given filter.
//==============================================================================
void JRangeFilter::Config(std::string filter){
Reset();
std::string tx,tx2;
while(!filter.empty()){
int pos=int(filter.find(","));
tx=(pos>0? filter.substr(0,pos): filter);
filter=(pos>0? filter.substr(pos+1): "");
pos=int(tx.find("-"));
tx2=(pos>0? tx.substr(0,pos): "");
if(pos>0)tx=tx.substr(pos+1);
if(tx2.empty())AddValue(atoi(tx.c_str()));
else AddRange(atoi(tx2.c_str()),atoi(tx.c_str()));
}
SortRanges();
JoinRanges();
if(Count){
ValueMin=Ranges[0]; ValueMax=Ranges[((int(Count)-1)<<1)+1];
if(ValueMax-ValueMin<1000&&ValueMax-ValueMin>1&&Count>1){
FastValue=new byte[ValueMax-ValueMin+1];
memset(FastValue,0,sizeof(byte)*(ValueMax-ValueMin+1));
for(unsigned c=0;c<Count;c++){
unsigned r=Ranges[c<<1],r2=Ranges[(c<<1)+1];
for(;r<=r2;r++)FastValue[r-ValueMin]=1;
}
}
}
}
开发者ID:PedroHRDiniz，项目名称:RVA，代码行数:30，代码来源:JRangeFilter.cpp
示例8: CurIndex
bool KThruput::AddValue(int duration, unsigned long in, unsigned long out)
{
int index = CurIndex();
if (index >= 0 && RunTime[index] == duration)
return TRUE;
index = CurIndex(COUNT);
RunTime[index] = duration;
AddValue(IN_DATA,in);
AddValue(OUT_DATA,out);
repaint();
return TRUE;
}
开发者ID:marschap，项目名称:isdn4k-utils，代码行数:17，代码来源:kthruput.cpp
示例9: AddValue
void R2Image::
AddValue(double x, double y, int c, double value)
{
// Bilinear splat
int ix1 = (int) x;
int iy1 = (int) y;
int ix2 = ix1 + 1;
int iy2 = iy1 + 1;
if (ix2 >= width) ix2 = ix1;
if (iy2 >= height) iy2 = iy1;
double dx = x - ix1;
double dy = y - iy1;
AddValue(ix1, iy1, c, value * (1.0-dx) * (1.0-dy));
AddValue(ix1, iy2, c, value * (1.0-dx) * dy);
AddValue(ix2, iy1, c, value * dx * (1.0-dy));
AddValue(ix2, iy2, c, value * dx * dy);
}
开发者ID:52nlp，项目名称:LabelMeAnnotationTool，代码行数:17，代码来源:R2Image.cpp
示例10: AddValue
void PerformanceStackPair::SendValues()
{
UpdateBuilder builder;
for (uint32_t i = 0; i < EVENTS_PER_ITERATION; ++i)
{
AddValue(i, builder);
}
this->outstation->Apply(builder.Build());
}
开发者ID:automatak，项目名称:dnp3，代码行数:9，代码来源:PerformanceStackPair.cpp
示例11: CGPObject
CGPValue::CGPValue(const char *initName, const char *initValue) :
CGPObject(initName),
mList(0)
{
if (initValue)
{
AddValue(initValue);
}
}
开发者ID:Joanxt，项目名称:OpenJK，代码行数:9，代码来源:genericparser2.cpp
示例12: _status
Store::Store(SymbolTable& symTab):_cell(0.0), _status (stNotInit)
{
std::cout << "e = " << std::exp(1) << std::endl;
int id = symTab.ForceAdd("e");
SetValue (id, std::exp(1) );
std::cout << "pi = " << 2 * std::acos (0.0) << std::endl;
id = symTab.ForceAdd("pi");
AddValue (id, 2.0 * std::acos (0.0) );
}
开发者ID:Accordeur，项目名称:Calc，代码行数:10，代码来源:Store.cpp
示例13: AddValue
bool
CAuthAuthority::AddValue( CFStringRef inAuthAuthorityString )
{
char aaBuffer[1024];
if ( CFStringGetCString(inAuthAuthorityString, aaBuffer, sizeof(aaBuffer), kCFStringEncodingUTF8) )
return AddValue( aaBuffer );
return false;
}
开发者ID:aosm，项目名称:DSTools，代码行数:10，代码来源:CAuthAuthority.cpp
示例14: while
HRESULT CBCookie::ParseUrlEncodeString(LPCSTR pstr, UINT nSize)
{
LPCSTR pstrTemp;
CBString strKey, strValue;
LPCSTR pdefstr = pstr;
UINT nDefSize = nSize;
m_dict.RemoveAll();
while(nSize)
{
pstrTemp = pstr;
while(nSize && *pstr != '=')
{
pstr ++;
nSize --;
}
if(!nSize)break;
if(pstr > pstrTemp)
strKey = CBEncoding::UrlDecode(pstrTemp, (UINT)(pstr - pstrTemp));
else strKey.Empty();
if(nSize)
{
nSize --;
pstr ++;
}
pstrTemp = pstr;
while(nSize && *pstr != '&')
{
pstr ++;
nSize --;
}
if(!strKey.IsEmpty())
if(pstr > pstrTemp)
strValue = CBEncoding::UrlDecode(pstrTemp, (UINT)(pstr - pstrTemp));
else strValue.Empty();
if(nSize)
{
nSize --;
pstr ++;
}
if(!strKey.IsEmpty())AddValue(strKey, strValue);
}
if(m_dict.GetCount())m_strDefault = CBString(pdefstr, nDefSize);
else m_strDefault = CBEncoding::UrlDecode(pdefstr, nDefSize);
return S_OK;
}
开发者ID:2Quico，项目名称:netbox，代码行数:55，代码来源:BCookie.cpp
示例15: AddValue
bool
User::BuildYourValueSet(){
ManagedObject::BuildYourValueSet();
AddValue( &m_userName , SSAPI_USER_FID_USERNAME );
AddValue( &m_password , SSAPI_USER_FID_PASSWORD );
AddValue( &m_firstName , SSAPI_USER_FID_FIRST_NAME );
AddValue( &m_lastName , SSAPI_USER_FID_LAST_NAME );
AddValue( &m_description , SSAPI_USER_FID_DESCRIPTION );
AddValue( &m_email , SSAPI_USER_FID_EMAIL );
AddValue( &m_phoneNumber1 , SSAPI_USER_FID_PHONE_1 );
AddValue( &m_phoneNumber2 , SSAPI_USER_FID_PHONE_2 );
AddValue( &m_department , SSAPI_USER_FID_DEPARTMENT);
AddInt(m_language, SSAPI_USER_FID_LANGUAGE );
return true;
}
开发者ID:JoeAltmaier，项目名称:Odyssey，代码行数:17，代码来源:User.cpp
示例16: assert
void Storage::SetValue(unsigned int id,double value)
{
assert(id<=cells_.size());
if (id<cells_.size())
{
cells_[id] = value;
inits_[id] = true;
}else if(id == cells_.size())
{
AddValue(id,value);
}
}
开发者ID:Cabriter，项目名称:Calculate，代码行数:12，代码来源:Storage.cpp
示例17: ComputeBestMix
long long ComputeBestMix(struct ingredient **pantry, struct cookie jar,
int numLeft, int maxTsp)
{
int myTsp;
long long retVal = 0, tmpVal;
if (maxTsp == 0) {
return CookieValue(&jar);
} else if (numLeft == 1) {
AddValue(pantry[0], &jar, maxTsp);
return CookieValue(&jar);
}
for (myTsp = maxTsp; myTsp >= 0; myTsp--) {
AddValue(pantry[0], &jar, myTsp);
tmpVal = ComputeBestMix(pantry+1, jar, numLeft-1, maxTsp-myTsp);
SubtractValue(pantry[0], &jar, myTsp);
if (tmpVal > retVal) {
retVal = tmpVal;
}
}
return retVal;
}
开发者ID:adventofcode，项目名称:2015solutions，代码行数:21，代码来源:p1a.c
示例18: AddInt
void
SSAPIEvent::BuildYourValueSet(){
AddInt(m_eventType, SSAPI_EVENT_FID_EVENT_TYPE );
AddInt64(m_timeStamp, SSAPI_EVENT_FID_TIMESTAMP );
AddGenericValue( (char *)&m_parentId, sizeof(m_parentId), SSAPI_EVENT_FID_PARENT_ID );
if( m_pManagedObject ){
m_pManagedObject->BuildYourValueSet();
AddValue( m_pManagedObject, SSAPI_EVENT_FID_MANAGED_OBJECT );
m_pManagedObject->Clear();
}
}
开发者ID:JoeAltmaier，项目名称:Odyssey，代码行数:13，代码来源:SsapiEvents.cpp
示例19: AddValue
bool Object::Combine(const Object& img, bool allow_mix, float factor) {
AddValue(img.Value(), factor);
if (!allow_mix && (stagevalues.Nitems() || img.stagevalues.Nitems()) &&
(stagevalues.Nitems()!=1 || img.stagevalues.Nitems()!=1)) {
char txt[100];
sprintf(txt, "%d %d", stagevalues.Nitems(), img.stagevalues.Nitems());
return ShowError("Object::Combine() error #1a: ", txt);
}
if (allow_mix && stagevalues.Nitems()!=img.stagevalues.Nitems()) {
char txt[100];
sprintf(txt, "%d %d", stagevalues.Nitems(), img.stagevalues.Nitems());
return ShowError("Object::Combine() error #1b: ", txt);
}
for (int j=0; j<stagevalues.Nitems(); j++) {
FloatVector &dst = stagevalues[j];
const FloatVector &src = img.stagevalues[j];
if (dst.Length()!=src.Length() || dst.Length()<2) {
char txt[100];
sprintf(txt, "j=%d %d %d", j, dst.Length(), src.Length());
return ShowError("Object::Combine() error #2: ", txt);
}
for (int i=0; i<dst.Length()-1; i++) {
if (!allow_mix && dst[i]!=MAXFLOAT && src[i]!=MAXFLOAT) {
cout << "this=" << DumpString(-1) << endl;
cout << "img =" << img.DumpString(-1) << endl;
char txt[100];
sprintf(txt, "j=%d i=%d", j, i);
return ShowError("Object::Combine() error #3: ", txt);
}
if (src[i]!=MAXFLOAT) {
if (dst[i]==MAXFLOAT)
dst[i] = src[i];
else
dst[i] += src[i];
}
}
dst.Last() = value;
}
return true;
}
开发者ID:aalto-cbir，项目名称:PicSOM，代码行数:46，代码来源:Valued.C
示例20: TOLOG
bool CWizXmlRpcStructValue::Read(CWizXMLNode& nodeValue)
{
CWizXMLNode nodeStruct;
if (!nodeValue.FindChildNode(_T("struct"), nodeStruct))
{
TOLOG(_T("Failed to get struct node!"));
return FALSE;
}
//
std::deque<CWizXMLNode> arrayMember;
nodeStruct.GetAllChildNodes(arrayMember);
//
for (std::deque<CWizXMLNode>::iterator it = arrayMember.begin();
it != arrayMember.end();
it++)
{
CWizXMLNode& nodeMember = *it;
//
CString strName;
if (!nodeMember.GetChildNodeText(_T("name"), strName))
{
TOLOG(_T("Failed to get struct member name!"));
return FALSE;
}
//
CWizXMLNode nodeMemberValue;
if (!nodeMember.FindChildNode(_T("value"), nodeMemberValue))
{
TOLOG(_T("Failed to get struct member value!"));
return FALSE;
}
//
CWizXmlRpcValue* pMemberValue = NULL;
if (!WizXmlRpcValueFromXml(nodeMemberValue, &pMemberValue))
{
TOLOG(_T("Failed to load struct member value from node!"));
return FALSE;
}
//
ATLASSERT(pMemberValue);
//
AddValue(strName, pMemberValue);
}
//
return TRUE;
}
开发者ID:dwdcth，项目名称:WizQTClient，代码行数:46，代码来源:wizxmlrpc.cpp
注：本文中的AddValue函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论