• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ AddParameter函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中AddParameter函数的典型用法代码示例。如果您正苦于以下问题：C++ AddParameter函数的具体用法？C++ AddParameter怎么用？C++ AddParameter使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了AddParameter函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: switch

BOOL CCommand_VCS_Plc::InitCommand_LayerSettingServices(DWORD p_ulCommandId)
{
    switch(p_ulCommandId)
    {
        case PLC_SEND_LSS_FRAME:
            {
                CCommand_VCS::InitCommand("SendLSSFrame", PLC_SEND_LSS_FRAME);
                AddParameter(0, "data", ODT_MEMORY_BLOCK);
                AddReturnParameter(0, "errorCode", ODT_UINT32);
                SetDefaultParameter_SendLSSFrame();
                return TRUE;
            };
        case PLC_READ_LSS_FRAME:
            {
                CCommand_VCS::InitCommand("ReadLSSFrame", PLC_READ_LSS_FRAME);
                AddParameter(0, "timeout", ODT_UINT16);
                AddReturnParameter(0, "errorCode", ODT_UINT32);
                AddReturnParameter(1, "data", ODT_MEMORY_BLOCK);
                SetDefaultParameter_ReadLSSFrame();
                return TRUE;
            };
    }

    return FALSE;
}
开发者ID:RIVeR-Lab，项目名称:eposcmd，代码行数:25，代码来源:Command_VCS_Plc.cpp


示例2: AddJack

void CDrumMachine::Init(const int Index,void* MainWindow)
{
    m_Name=devicename;
    IDevice::Init(Index,MainWindow);
    AddJack("Out",IJack::Wave,IJack::Out,0);
    AddParameter(ParameterType::Numeric,"Tempo","BPM",20,300,0,"",100);
    AddParameter(ParameterType::dB,"Volume","dB",0,200,0,"",100);
    BeatInterval=0;
    PatternLength=0;
    SamplesPerTick=0;
    Playing=false;
    PatternType* DefaultPattern=new PatternType("Default",16,DrumMachine::SoundCount,100,0,0);
    Patterns.append(DefaultPattern);
    PatternListType* DefaultList=new PatternListType();
    DefaultList->Pattern=DefaultPattern;
    DefaultList->Repeats=4;
    PatternsInList.append(DefaultList);
    AddSound("kick02.wav","Kick",&WG[0],&ST[0]);
    AddSound("snr01.wav","Snare",&WG[1],&ST[1]);
    AddSound("hat01.wav","Hi-Hat",&WG[2],&ST[2]);
    AddSound("hat19.wav","Open Hi-Hat",&WG[3],&ST[3]);
    AddSound("cym01.wav","Cymbal",&WG[4],&ST[4]);
    AddSound("tom01.wav","Tom 1",&WG[5],&ST[5]);
    AddSound("tom02.wav","Tom 2",&WG[6],&ST[6]);
    Reset();
    CalcParams();
    m_Form=new CDrumMachineForm(this,(QWidget*)MainWindow);
}
开发者ID:vemod-，项目名称:Object-Studio，代码行数:28，代码来源:cdrummachine.cpp


示例3: SetName

void otb::Wrapper::Aggregate::DoInit()
{
    SetName("Aggregate");
    SetDescription("This application assign a class on each object of a segmentation by majority voting on a pixel-based classification.");

    SetDocName("Aggregate");
    SetDocLongDescription("The aim of this application is to merge the result of a segmentation with a pixel-based image classification in order to produce an object-oriented image classification. The input segmentation is a labeled image, typically the result provided by the OTB application LSMSSegmentation. The output is a vector dataset containing objects and the corresponding class in the attribute table. Connected regions belonging to the same class are merged. This application could be used at the last step of the LSMS pipeline in replacement of the application LSMSVectorization.");
    SetDocLimitations("Input classification and labeled image should have identical resolution and footprint");
    SetDocAuthors("Lucie Bouillot");
    SetDocSeeAlso("MeanShiftSmoothing, LSMSSegmentation, LSMSSmallRegionsMerging, TrainImagesClassifier, ImagesClassification");
    AddDocTag(Tags::Segmentation);
    AddDocTag(Tags::Learning);

    AddParameter(ParameterType_InputImage, "in", "Input classification");
    SetParameterDescription( "in", "Pixel-based image classification." );

    AddParameter(ParameterType_InputImage,  "inseg",    "Labeled image");
    SetParameterDescription( "inseg", "Labeled image representing a segmentation of an image.");

    AddParameter(ParameterType_OutputImage, "outim", "Output raster");
    SetParameterDescription( "outim", "Output raster, object-oriented image classification.");

    AddParameter(ParameterType_OutputFilename, "out", "Output vector dataset");
    SetParameterDescription( "out", "Output vector dataset, object-oriented image classification. The class 0 is considered as background.");

    SetDocExampleParameterValue("in","classification.tif");
    SetDocExampleParameterValue("inseg","labeled_image.tif");
    SetDocExampleParameterValue("outim","image_classification.tif");
    SetDocExampleParameterValue("out","vector_classification.shp");
}
开发者ID:rkanavath，项目名称:SertitObject，代码行数:30，代码来源:otbAggregate.cpp


示例4: switch

BOOL CCommand_VCS_Plc2::InitCommand_ProcessImageAccess(DWORD p_ulCommandId)
{
    switch(p_ulCommandId)
    {
        case PLC2_SET_PROCESS_INPUT_IMAGE:
            {
                CCommand_VCS::InitCommand("SetProcessInputImage", PLC2_SET_PROCESS_INPUT_IMAGE);
                AddParameter(0, "selectionStart", ODT_UINT32);
                AddParameter(1, "selectionLength", ODT_UINT32);
                AddParameter(2, "data", ODT_MEMORY_BLOCK);
                SetDefaultParameter_SetProcessInputImage();
                return TRUE;
            };
        case PLC2_GET_PROCESS_OUTPUT_IMAGE:
            {
                CCommand_VCS::InitCommand("GetProcessOutputImage", PLC2_GET_PROCESS_OUTPUT_IMAGE);
                AddParameter(0, "selectionStart", ODT_UINT32);
                AddParameter(1, "selectionLength", ODT_UINT32);
                AddReturnParameter(0, "data", ODT_MEMORY_BLOCK);
                SetDefaultParameter_GetProcessOutputImage();
                return TRUE;
            };
    }

    return FALSE;
}
开发者ID:RIVeR-Lab，项目名称:eposcmd，代码行数:26，代码来源:Command_VCS_Plc2.cpp


示例5: SetName

void otb::Wrapper::ObjectsRadiometricStatistics::DoInit()
{
	SetName("ObjectsRadiometricStatistics");
	SetDescription("Compute features attributes of a vector dataset over an image.");

	SetDocName("ObjectsRadiometricStatistics");
	SetDocLongDescription("This application computes radiometric and shapes attributes on a vector dataset, using an image. The results are stored in the attribute table. Shape attributes are : number of pixels, flatness, roundness, elongation, perimeter. Radiometric attributes are for each band of the input image : mean, standard-deviation, median, variance, kurtosis, skewness.");
	SetDocLimitations("None");
	SetDocAuthors("Arnaud Durand");
	SetDocSeeAlso("For now, support of input dataset with multiple layers having different projection reference system is limited.");

	AddParameter(ParameterType_InputFilename,  "in",   "Input vector dataset");
	SetParameterDescription( "in", "Input vector dataset providing segmentation.");

	AddParameter(ParameterType_InputImage,  "im",   "Input reference image");
	SetParameterDescription( "im", "Input image used to compute radiometric attributes.");

	AddParameter(ParameterType_String,"field","ID field");
	SetParameterDescription("field","Name of the field containing object IDs.");
	SetParameterString("field","label");

	AddParameter(ParameterType_Int,"background", "Background value");
	SetParameterDescription("background","Background value. Needs to be different of any object ID.");
	SetDefaultParameterInt("background",0);

	SetDocExampleParameterValue("in","segmentation.shp");
	SetDocExampleParameterValue("im","image_XS.tif");
	SetDocExampleParameterValue("field","label");
	SetDocExampleParameterValue("background","0");
	
	AddParameter(ParameterType_InputFilename, "out", "Output vector dataset");
	SetParameterDescription("out", "Output vector dataset containing features attributes.");
}
开发者ID:rkanavath，项目名称:SertitObject，代码行数:33，代码来源:otbObjectsRadiometricStatistics.cpp


示例6: axVst

//******************************************************************************
// AGain.
//******************************************************************************
AGain::AGain(audioMasterCallback audioMaster):
axVst(audioMaster, 2)
{
    AGain::AGainMutex.lock();
    AddParameter(axParameterInfo("Gain", "dB", 1.0));
    AddParameter(axParameterInfo("Filter", "Hz", 5000.0));
    
    // Default program name
    vst_strncpy(programName, "axTB303", kVstMaxProgNameLen);
    
    double c5 = 220.0 * pow(ST_RATIO, 3);
    c0 = c5 * pow(0.5, 5);
    

    axEventManager* evtManager = axEventManager::GetInstance();
    
//    evtManager->AddConnection(10000000 + getProgram(),
//                              0,
//                              GetOnVstParameterValueChange());
    
    evtManager->AddConnection(10000000 + GetPluginId(),
                              0,
                              GetOnVstParameterValueChange());
    
    AGain::AGainMutex.unlock();
}
开发者ID:EQ4，项目名称:axLib，代码行数:29，代码来源:axGain.cpp


示例7: Message

 ActorUpdateMessage::ActorUpdateMessage() : Message() 
 {
    AddParameter(new StringMessageParameter(NAME_PARAMETER));
    AddParameter(new StringMessageParameter(ACTOR_TYPE_NAME_PARAMETER));
    AddParameter(new StringMessageParameter(ACTOR_TYPE_CATEGORY_PARAMETER));
    AddParameter(new StringMessageParameter(PROTOTYPE_NAME_PARAMETER));
    mUpdateParameters = new GroupMessageParameter(UPDATE_GROUP_PARAMETER);
    AddParameter(mUpdateParameters);
 }
开发者ID:VRAC-WATCH，项目名称:deltajug，代码行数:9，代码来源:actorupdatemessage.cpp


示例8: AddJack

void CLFO::Init(const int Index, void *MainWindow) {
    m_Name=devicename;
    IDevice::Init(Index,MainWindow);
    AddJack("Out",IJack::Pitch,IJack::Out,jnOutPitch);
    AddJack("Out Amplitude",IJack::Amplitude,IJack::Out,jnOutAmplitude);
    AddParameter(ParameterType::Numeric,"Frequency","Hz",1,10000,100,"",400);
    AddParameter(ParameterType::SelectBox,"WaveForm","",0,5,0,"Sine§Square§Triangle§Sawtooth§Noise§Sample and Hold",0);
    AddParameter(ParameterType::dB,"Volume","dB",0,200,0,"",100);
    CalcParams();
}
开发者ID:vemod-，项目名称:Object-Studio，代码行数:10，代码来源:clfo.cpp


示例9: AddJack

void CPhaser::Init(const int Index, void *MainWindow) {
    m_Name=devicename;
    IDevice::Init(Index,MainWindow);
    AddJack("Out",IJack::Wave,IJack::Out,0);
    AddJack("In",IJack::Wave,IJack::In,0);
    AddParameter(ParameterType::Numeric,"Range Min","Hz",20,m_Presets.SampleRate / 2.f,0,"",440);
    AddParameter(ParameterType::Numeric,"Range Max","Hz",20,m_Presets.SampleRate / 2.f,0,"",1600);
    AddParameter(ParameterType::Numeric,"Rate","Sweeps/sec",5,200,100,"",50);
    AddParameter(ParameterType::Numeric,"Feedback","%",0,100,0,"",70);
    AddParameter(ParameterType::Numeric,"Depth","%",0,100,0,"",100);
    CalcParams();
}
开发者ID:vemod-，项目名称:Object-Studio，代码行数:12，代码来源:cphaser.cpp


示例10: BindStandardLibrary

/* bind the duck standard library */
void BindStandardLibrary()
{
    VALUE duckStdLib = LinkNamespace("duck");

    VALUE print = CreateFunction(DuckPrint);
    AddParameter(print, "output");
    LinkFunction(duckStdLib, "print", print);

    VALUE println = CreateFunction(DuckPrintLn);
    AddParameter(println, "output");
    LinkFunction(duckStdLib, "println", println);

    VALUE prompt = CreateFunction(DuckPrompt);
    AddParameter(prompt, "message");
    LinkFunction(duckStdLib, "prompt", prompt);

    LinkConstString(duckStdLib, "newline", "\n");

    VALUE root;
    root.type = VAL_REFERENCE;
    root.data.reference = gGlobalContext;

    VALUE int_c = CreateFunction(DuckInt);
    AddParameter(int_c, "value");
    LinkFunction(root, "int", int_c);

    VALUE float_c = CreateFunction(DuckFloat);
    AddParameter(float_c, "value");
    LinkFunction(root, "float", float_c);

    VALUE length = CreateFunction(DuckLength);
    AddParameter(length, "array");
    LinkFunction(root, "len", length);

    VALUE type = CreateFunction(DuckType);
    AddParameter(type, "object");
    LinkFunction(root, "Type", type);

    VALUE evalFunc = CreateFunction(DuckEval);
    AddParameter(evalFunc, "source");
    LinkFunction(root, "eval", evalFunc);

    VALUE parsesFunc = CreateFunction(DuckParses);
    AddParameter(parsesFunc, "source");
    LinkFunction(duckStdLib, "parses", parsesFunc);

    VALUE duckQuit = CreateFunction(DuckQuit);
    LinkFunction(root, "quit", duckQuit);
    BindStringLibrary();

    VALUE time = CreateFunction(DuckTime);
    LinkFunction(root, "time", time);

#ifdef WIN32
    start_t = GetTickCount();
#endif
}
开发者ID:gregtour，项目名称:duck-lang，代码行数:58，代码来源:stdduck.c


示例11: CreateUri

struct Header *BuildRequestViaHeader(MESSAGE *message, struct Dialog *dialog)
{
    URI *uri = CreateUri("", "", GetLocalIpAddr(), LOCAL_PORT);
    VIA_HEADER *via = CreateViaHeader(uri);    
    struct Parameters *ps = ViaHeaderGetParameters(via);
    char branch[32];

    AddParameter(ps, "rport", "");
    GenerateBranch(branch);
    AddParameter(ps, VIA_BRANCH_PARAMETER_NAME, branch); 

    return (struct Header *)via;
}
开发者ID:yjjfirst，项目名称:x-sip，代码行数:13，代码来源:MessageBuilder.c


示例12: AddJack

void CExciter::Init(const int Index, void *MainWindow)
{
    int Maxcutoff=m_Presets.SampleRate * 0.425;
    m_Name="Exciter";
    IDevice::Init(Index,MainWindow);
    AddJack("Out",IJack::Wave,IJack::Out,0);
    AddJack("Effect Out",IJack::Wave,IJack::Out,0);
    AddJack("In",IJack::Wave,IJack::In,0);
    AddParameter(ParameterType::SelectBox,"Type","",0,1,0,"Soft§Clipping",0);
    AddParameter(ParameterType::dB,"In Volume","dB",0,200,0,"",100);
    AddParameter(ParameterType::Numeric,"Amount","%",0,100,0,"",100);
    AddParameter(ParameterType::Numeric,"Cutoff Frequency","Hz",20,Maxcutoff,0,"",Maxcutoff/2);
    AddParameter(ParameterType::Numeric,"Effect","%",0,100,0,"",50);
    CalcParams();
}
开发者ID:vemod-，项目名称:Object-Studio，代码行数:15，代码来源:cexciter.cpp


示例13: ReadMessageDriverSettings

bool
ReadMessageDriverSettings(const char *name, BMessage *message)
{
	if(!name || !message)
		return false;
	
	void *handle = load_driver_settings(name);
	if(!handle)
		return false;
	const driver_settings *settings = get_driver_settings(handle);
	if(!settings) {
		unload_driver_settings(handle);
		return false;
	}
	
	for(int32 index = 0; index < settings->parameter_count; index++) {
		BMessage parameter;
		AddParameter(&settings->parameters[index], &parameter);
		message->AddMessage(MDSU_PARAMETERS, &parameter);
	}
	
	unload_driver_settings(handle);
	
	return true;
}
开发者ID:AmirAbrams，项目名称:haiku，代码行数:25，代码来源:MessageDriverSettingsUtils.cpp


示例14: strstr

dDAGFunctionNode::dDAGFunctionNode(dList<dDAG*>& allNodes, dDAGTypeNode* const type, const char* const name, const char* const visivility)
	:dDAG(allNodes)
	,m_isStatic(false)
	,m_isPublic(true)
	,m_isConstructor(false)
	,m_loopLayer(0)
	,m_opertatorThis()
	,m_returnType (type)
	,m_body(NULL)
	,m_modifier(NULL)
	,m_functionStart(NULL)
	,m_parameters() 
	,m_blockMap()
{
	m_name = name;

	m_isStatic = strstr (visivility, "static") ? true : false;
	m_isPublic = strstr (visivility, "public") ? true : false;

	if (!m_isStatic) {
		dAssert (0);
		dDAGParameterNode* const operatorThis = new dDAGParameterNode (allNodes, "this", "");
		operatorThis->SetType(new dDAGTypeNode (allNodes, "this"));
		AddParameter(operatorThis);
	}

}
开发者ID:famorcia，项目名称:newton-dynamics，代码行数:27，代码来源:dDAGFunctionNode.cpp


示例15: AddParameter

void
VegaParametersWidget::AddBoolean(const char *name, const TCHAR *label,
                                 const TCHAR *help)
{
  AddParameter(name);
  RowFormWidget::AddBoolean(label, help);
}
开发者ID:Advi42，项目名称:XCSoar，代码行数:7，代码来源:VegaParametersWidget.cpp


示例16: AddParameter

void CParameterInfo::AddParameter(int paramIndex, CStdString name, EObjectDataType type, DWORD dArraySize)
{
	const BOOL editable = TRUE;
	const BOOL visible = TRUE;

	AddParameter(paramIndex, name, type, dArraySize, editable, visible);
}
开发者ID:RIVeR-Lab，项目名称:eposcmd，代码行数:7，代码来源:ParameterInfo.cpp


示例17: CheckQualifier

TVariablePtr ExpressionParser::ParseVariableDeclaration(StringPtrLen str) const
{
   str.TrimRight();

   BracketsContent content;
   str = content.Parse(str);

   str.Trim();
   CheckQualifier(str, "Variable name");

   if (m_variable_mgr.FindVariable(str) != nullptr)
   {
      Error("Variable '", str, "' is already declared.");
   }

   auto variable = std::make_unique<Variable>(str);

   StringPtrLen param;
   while (content.GetPart(param))
   {
      param.Trim();
      CheckQualifier(param, "Parameter name");
      variable->AddParameter(param);
   }

   return variable;
}
开发者ID:RomeoMontekky，项目名称:dm，代码行数:27，代码来源:expression_parser.cpp


示例18: free

NS_IMETHODIMP 
nsJavaObjectInfo::SetDocBase(const char * aDocBase)
{
  free(m_docbase);
  m_docbase = strdup(aDocBase);
  AddParameter("docbase", aDocBase);
  return NS_OK;
}
开发者ID:EdgarChen，项目名称:mozilla-cvs-history，代码行数:8，代码来源:nsJavaObjectInfo.cpp


示例19: BindStringLibrary

void BindStringLibrary()
{
    VALUE stringLib = LinkNamespace("string");
    
    VALUE split = CreateFunction(StringSplit);
    AddParameter(split, "string");
    LinkFunction(stringLib, "split", split);
}
开发者ID:gregtour，项目名称:duck-lang，代码行数:8，代码来源:stdduck.c


示例20: SetProviderName

//------------------------------------------------------------------------------------------
void CSkeletonParameterProvider::CreateParameterMap()
{
    CSkeletonParameterProvider& parameterProvider = *((CSkeletonParameterProvider*)(0));

    SetProviderName( "CSkeletonParameterProvider" );

    AddParameter(  parameterProvider.m_boneMatrices, "uBoneMatrices" );
}
开发者ID:Pawel91，项目名称:Thot，代码行数:9，代码来源:Skeleton.cpp



注：本文中的AddParameter函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ AddPart函数代码示例发布时间：2022-05-30
下一篇：
C++ AddPage函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap