C++ AcpiDmIndent函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中AcpiDmIndent函数的典型用法代码示例。如果您正苦于以下问题：C++ AcpiDmIndent函数的具体用法？C++ AcpiDmIndent怎么用？C++ AcpiDmIndent使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了AcpiDmIndent函数的14个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: AcpiDmMemory24Descriptor

void
AcpiDmMemory24Descriptor (
    AML_RESOURCE            *Resource,
    UINT32                  Length,
    UINT32                  Level)
{

    /* Dump name and read/write flag */

    AcpiDmIndent (Level);
    AcpiOsPrintf ("Memory24 (%s,\n",
        AcpiGbl_RwDecode [ACPI_GET_1BIT_FLAG (Resource->Memory24.Flags)]);

    /* Dump the 4 contiguous WORD values */

    AcpiDmMemoryFields (&Resource->Memory24.Minimum, 16, Level);

    /* Insert a descriptor name */

    AcpiDmIndent (Level + 1);
    AcpiDmDescriptorName ();
    AcpiOsPrintf (")\n");
}

开发者ID:99corps，项目名称:runtime，代码行数:23，代码来源:dmresrcl.c

示例2: AcpiDmFixedIoDescriptor

void
AcpiDmFixedIoDescriptor (
    ACPI_OP_WALK_INFO       *Info,
    AML_RESOURCE            *Resource,
    UINT32                  Length,
    UINT32                  Level)
{

    AcpiDmIndent (Level);
    AcpiOsPrintf ("FixedIO (\n");

    AcpiDmIndent (Level + 1);
    AcpiDmDumpInteger16 (Resource->FixedIo.Address, "Address");

    AcpiDmIndent (Level + 1);
    AcpiDmDumpInteger8 (Resource->FixedIo.AddressLength, "Length");

    /* Insert a descriptor name */

    AcpiDmIndent (Level + 1);
    AcpiDmDescriptorName ();
    AcpiOsPrintf (")\n");
}

开发者ID:Raphine，项目名称:Raph_Kernel，代码行数:23，代码来源:dmresrcs.c

示例3: AcpiDmIrqDescriptor

void
AcpiDmIrqDescriptor (
    ASL_IRQ_FORMAT_DESC     *Resource,
    UINT32                  Length,
    UINT32                  Level)
{

    AcpiDmIndent (Level);
    AcpiOsPrintf ("%s (",
        AcpiGbl_IrqDecode [Length & 1]);

    if (Length & 1)
    {
        AcpiOsPrintf ("%s, %s, %s",
            AcpiGbl_HEDecode [Resource->Flags & 1],
            AcpiGbl_LLDecode [(Resource->Flags >> 3) & 1],
            AcpiGbl_SHRDecode [(Resource->Flags >> 4) & 1]);
    }

开发者ID:MarginC，项目名称:kame，代码行数:18，代码来源:dmresrcs.c

示例4: AcpiDmGpioCommon

static void
AcpiDmGpioCommon (
    AML_RESOURCE            *Resource,
    UINT32                  Level)
{
    UINT32                  PinCount;
    UINT16                  *PinList;
    UINT8                   *VendorData;
    UINT32                  i;


    /* ResourceSource, ResourceSourceIndex, ResourceType */

    AcpiDmIndent (Level + 1);
    if (Resource->Gpio.ResSourceOffset)
    {
        AcpiUtPrintString (
            ACPI_ADD_PTR (char, Resource, Resource->Gpio.ResSourceOffset),
            ACPI_UINT16_MAX);
    }

开发者ID:Alkzndr，项目名称:freebsd，代码行数:20，代码来源:dmresrcl2.c

示例5: AcpiDmAddressFields

static void
AcpiDmAddressFields (
    void                    *Source,
    UINT8                   Type,
    UINT32                  Level)
{
    UINT32                  i;


    AcpiOsPrintf ("\n");

    for (i = 0; i < 5; i++)
    {
        AcpiDmIndent (Level + 1);

        switch (Type)
        {
        case 16:

            AcpiDmDumpInteger16 (ACPI_CAST_PTR (UINT16, Source)[i],
                AcpiDmAddressNames[i]);
            break;

        case 32:

            AcpiDmDumpInteger32 (ACPI_CAST_PTR (UINT32, Source)[i],
                AcpiDmAddressNames[i]);
            break;

        case 64:

            AcpiDmDumpInteger64 (ACPI_CAST_PTR (UINT64, Source)[i],
                AcpiDmAddressNames[i]);
            break;

        default:

            return;
        }
    }
}

开发者ID:Alkzndr，项目名称:freebsd，代码行数:41，代码来源:dmresrcl.c

示例6: AcpiDmGpioCommon

static void
AcpiDmGpioCommon (
    ACPI_OP_WALK_INFO       *Info,
    AML_RESOURCE            *Resource,
    UINT32                  Level)
{
    UINT16                  *PinList;
    UINT8                   *VendorData;
    char                    *DeviceName = NULL;
    UINT32                  PinCount;
    UINT32                  i;


    /* ResourceSource, ResourceSourceIndex, ResourceType */

    AcpiDmIndent (Level + 1);
    if (Resource->Gpio.ResSourceOffset)
    {
        DeviceName = ACPI_ADD_PTR (char, Resource, Resource->Gpio.ResSourceOffset),
        AcpiUtPrintString (DeviceName, ACPI_UINT16_MAX);
    }

开发者ID:coyizumi，项目名称:cs111，代码行数:21，代码来源:dmresrcl2.c

示例7: AcpiDmGenericRegisterDescriptor

void
AcpiDmGenericRegisterDescriptor (
    ACPI_OP_WALK_INFO       *Info,
    AML_RESOURCE            *Resource,
    UINT32                  Length,
    UINT32                  Level)
{

    AcpiDmIndent (Level);
    AcpiOsPrintf ("Register (");
    AcpiDmAddressSpace (Resource->GenericReg.AddressSpaceId);
    AcpiOsPrintf ("\n");

    AcpiDmIndent (Level + 1);
    AcpiDmDumpInteger8 (Resource->GenericReg.BitWidth, "Bit Width");

    AcpiDmIndent (Level + 1);
    AcpiDmDumpInteger8 (Resource->GenericReg.BitOffset, "Bit Offset");

    AcpiDmIndent (Level + 1);
    AcpiDmDumpInteger64 (Resource->GenericReg.Address, "Address");

    /* Optional field for ACPI 3.0 */

    AcpiDmIndent (Level + 1);
    if (Resource->GenericReg.AccessSize)
    {
        AcpiOsPrintf ("0x%2.2X,               // %s\n",
            Resource->GenericReg.AccessSize, "Access Size");
        AcpiDmIndent (Level + 1);
    }
    else
    {
        AcpiOsPrintf (",");
    }

    /* DescriptorName was added for ACPI 3.0+ */

    AcpiDmDescriptorName ();
    AcpiOsPrintf (")\n");
}

开发者ID:coyizumi，项目名称:cs111，代码行数:41，代码来源:dmresrcl.c

示例8: AcpiDmResourceTemplate

void
AcpiDmResourceTemplate (
    ACPI_OP_WALK_INFO       *Info,
    ACPI_PARSE_OBJECT       *Op,
    UINT8                   *ByteData,
    UINT32                  ByteCount)
{
    ACPI_STATUS             Status;
    UINT32                  CurrentByteOffset;
    UINT8                   ResourceType;
    UINT32                  ResourceLength;
    void                    *Aml;
    UINT32                  Level;
    BOOLEAN                 DependentFns = FALSE;
    UINT8                   ResourceIndex;
    ACPI_NAMESPACE_NODE     *Node;


    if (Op->Asl.AmlOpcode != AML_FIELD_OP)
    {
        Info->MappingOp = Op;
    }

    Level = Info->Level;
    ResourceName = ACPI_DEFAULT_RESNAME;
    Node = Op->Common.Node;
    if (Node)
    {
        Node = Node->Child;
    }

    for (CurrentByteOffset = 0; CurrentByteOffset < ByteCount;)
    {
        Aml = &ByteData[CurrentByteOffset];

        /* Get the descriptor type and length */

        ResourceType = AcpiUtGetResourceType (Aml);
        ResourceLength = AcpiUtGetResourceLength (Aml);

        /* Validate the Resource Type and Resource Length */

        Status = AcpiUtValidateResource (NULL, Aml, &ResourceIndex);
        if (ACPI_FAILURE (Status))
        {
            AcpiOsPrintf ("/*** Could not validate Resource, type (%X) %s***/\n",
                ResourceType, AcpiFormatException (Status));
            return;
        }

        /* Point to next descriptor */

        CurrentByteOffset += AcpiUtGetDescriptorLength (Aml);

        /* Descriptor pre-processing */

        switch (ResourceType)
        {
        case ACPI_RESOURCE_NAME_START_DEPENDENT:

            /* Finish a previous StartDependentFns */

            if (DependentFns)
            {
                Level--;
                AcpiDmIndent (Level);
                AcpiOsPrintf ("}\n");
            }
            break;

        case ACPI_RESOURCE_NAME_END_DEPENDENT:

            Level--;
            DependentFns = FALSE;
            break;

        case ACPI_RESOURCE_NAME_END_TAG:

            /* Normal exit, the resource list is finished */

            if (DependentFns)
            {
                /*
                 * Close an open StartDependentDescriptor. This indicates a
                 * missing EndDependentDescriptor.
                 */
                Level--;
                DependentFns = FALSE;

                /* Go ahead and insert EndDependentFn() */

                AcpiDmEndDependentDescriptor (Info, Aml, ResourceLength, Level);

                AcpiDmIndent (Level);
                AcpiOsPrintf (
                    "/*** Disassembler: inserted missing EndDependentFn () ***/\n");
            }
            return;

        default:
//.........这里部分代码省略.........

开发者ID:yazshel，项目名称:netbsd-kernel，代码行数:101，代码来源:dmresrc.c

示例9: AcpiDmAscendingOp

static ACPI_STATUS
AcpiDmAscendingOp (
    ACPI_PARSE_OBJECT       *Op,
    UINT32                  Level,
    void                    *Context)
{
    ACPI_OP_WALK_INFO       *Info = Context;
    ACPI_PARSE_OBJECT       *ParentOp;


    if (Op->Common.DisasmFlags & ACPI_PARSEOP_IGNORE)
    {
        /* Ignore this op -- it was handled elsewhere */

        return (AE_OK);
    }

    if ((Level == 0) && (Op->Common.AmlOpcode == AML_SCOPE_OP))
    {
        /* Indicates the end of the current descriptor block (table) */

        AcpiOsPrintf ("}\n\n");
        return (AE_OK);
    }

    switch (AcpiDmBlockType (Op))
    {
    case BLOCK_PAREN:

        /* Completed an op that has arguments, add closing paren if needed */

        AcpiDmCloseOperator (Op);

        if (Op->Common.AmlOpcode == AML_NAME_OP)
        {
            /* Emit description comment for Name() with a predefined ACPI name */

            AcpiDmPredefinedDescription (Op);
        }
        else
        {
            /* For Create* operators, attempt to emit resource tag description */

            AcpiDmFieldPredefinedDescription (Op);
        }

        /* Decode Notify() values */

        if (Op->Common.AmlOpcode == AML_NOTIFY_OP)
        {
            AcpiDmNotifyDescription (Op);
        }

        AcpiDmDisplayTargetPathname (Op);

        /* Could be a nested operator, check if comma required */

        if (!AcpiDmCommaIfListMember (Op))
        {
            if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) &&
                     (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) &&
                     (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP))
            {
                /*
                 * This is a first-level element of a term list
                 * start a new line
                 */
                if (!(Info->Flags & ACPI_PARSEOP_PARAMLIST))
                {
                    AcpiOsPrintf ("\n");
                }
            }
        }
        break;

    case BLOCK_BRACE:
    case (BLOCK_BRACE | BLOCK_PAREN):

        /* Completed an op that has a term list, add closing brace */

        if (Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST)
        {
            AcpiOsPrintf ("}");
        }
        else
        {
            AcpiDmIndent (Level);
            AcpiOsPrintf ("}");
        }

        AcpiDmCommaIfListMember (Op);

        if (AcpiDmBlockType (Op->Common.Parent) != BLOCK_PAREN)
        {
            AcpiOsPrintf ("\n");
            if (!(Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST))
            {
                if ((Op->Common.AmlOpcode == AML_IF_OP)  &&
                    (Op->Common.Next) &&
                    (Op->Common.Next->Common.AmlOpcode == AML_ELSE_OP))
//.........这里部分代码省略.........

开发者ID:alexandermerritt，项目名称:dragonfly，代码行数:101，代码来源:dmwalk.c

示例10: AcpiDmDescendingOp

static ACPI_STATUS
AcpiDmDescendingOp (
    ACPI_PARSE_OBJECT       *Op,
    UINT32                  Level,
    void                    *Context)
{
    ACPI_OP_WALK_INFO       *Info = Context;
    const ACPI_OPCODE_INFO  *OpInfo;
    UINT32                  Name;
    ACPI_PARSE_OBJECT       *NextOp;


    if (Op->Common.DisasmFlags & ACPI_PARSEOP_IGNORE)
    {
        /* Ignore this op -- it was handled elsewhere */

        return (AE_CTRL_DEPTH);
    }

    /* Level 0 is at the Definition Block level */

    if (Level == 0)
    {
        /* In verbose mode, print the AML offset, opcode and depth count */

        if (Info->WalkState)
        {
            VERBOSE_PRINT ((DB_FULL_OP_INFO,
                (Info->WalkState->MethodNode ?
                    Info->WalkState->MethodNode->Name.Ascii : "   "),
                Op->Common.AmlOffset, (UINT32) Op->Common.AmlOpcode));
        }

        if (Op->Common.AmlOpcode == AML_SCOPE_OP)
        {
            /* This is the beginning of the Definition Block */

            AcpiOsPrintf ("{\n");

            /* Emit all External() declarations here */

            AcpiDmEmitExternals ();
            return (AE_OK);
        }
    }
    else if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) &&
             (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) &&
             (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP))
    {
            /*
             * This is a first-level element of a term list,
             * indent a new line
             */
            switch (Op->Common.AmlOpcode)
            {
            case AML_NOOP_OP:
                /*
                 * Optionally just ignore this opcode. Some tables use
                 * NoOp opcodes for "padding" out packages that the BIOS
                 * changes dynamically. This can leave hundreds or
                 * thousands of NoOp opcodes that if disassembled,
                 * cannot be compiled because they are syntactically
                 * incorrect.
                 */
                if (AcpiGbl_IgnoreNoopOperator)
                {
                    Op->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE;
                    return (AE_OK);
                }

                /* Fallthrough */

            default:

                AcpiDmIndent (Level);
                break;
            }

            Info->LastLevel = Level;
            Info->Count = 0;
    }

    /*
     * This is an inexpensive mechanism to try and keep lines from getting
     * too long. When the limit is hit, start a new line at the previous
     * indent plus one. A better but more expensive mechanism would be to
     * keep track of the current column.
     */
    Info->Count++;
    if (Info->Count /* +Info->LastLevel */ > 12)
    {
        Info->Count = 0;
        AcpiOsPrintf ("\n");
        AcpiDmIndent (Info->LastLevel + 1);
    }

    /* If ASL+ is enabled, check for a C-style operator */

    if (AcpiDmCheckForSymbolicOpcode (Op, Info))
    {
//.........这里部分代码省略.........

开发者ID:alexandermerritt，项目名称:dragonfly，代码行数:101，代码来源:dmwalk.c

示例11: AcpiDmDumpDescending

static ACPI_STATUS
AcpiDmDumpDescending (
    ACPI_PARSE_OBJECT       *Op,
    UINT32                  Level,
    void                    *Context)
{
    ACPI_OP_WALK_INFO       *Info = Context;
    const ACPI_OPCODE_INFO  *OpInfo;
    char                    *Path;


    if (!Op)
    {
        return (AE_OK);
    }

    OpInfo = AcpiPsGetOpcodeInfo (Op->Common.AmlOpcode);
    Info->Count++;

    /* Most of the information (count, level, name) here */

    AcpiOsPrintf ("% 5d [%2.2d] ", Info->Count, Level);
    AcpiDmIndent (Level);
    AcpiOsPrintf ("%-28s", AcpiPsGetOpcodeName (Op->Common.AmlOpcode));

    /* Extra info is helpful */

    switch (Op->Common.AmlOpcode)
    {
    case AML_BYTE_OP:
    case AML_WORD_OP:
    case AML_DWORD_OP:
        AcpiOsPrintf ("%X", (UINT32) Op->Common.Value.Integer);
        break;

    case AML_INT_NAMEPATH_OP:
        if (Op->Common.Value.String)
        {
            AcpiNsExternalizeName (ACPI_UINT32_MAX, Op->Common.Value.String,
                            NULL, &Path);
            AcpiOsPrintf ("%s %p", Path, Op->Common.Node);
            ACPI_FREE (Path);
        }
        else
        {
            AcpiOsPrintf ("[NULL]");
        }
        break;

    case AML_NAME_OP:
    case AML_METHOD_OP:
    case AML_DEVICE_OP:
    case AML_INT_NAMEDFIELD_OP:
        AcpiOsPrintf ("%4.4s", &Op->Named.Name);
        break;

    default:
        break;
    }

    AcpiOsPrintf ("\n");
    return (AE_OK);
}

开发者ID:DangerDexter，项目名称:FreeBSD-8.0-dyntick，代码行数:63，代码来源:adwalk.c

示例12: AcpiDmAddressCommon

static void
AcpiDmAddressCommon (
    AML_RESOURCE            *Resource,
    UINT8                   Type,
    UINT32                  Level)
{
    UINT8                   ResourceType;
    UINT8                   SpecificFlags;
    UINT8                   Flags;


    ResourceType = Resource->Address.ResourceType;
    SpecificFlags = Resource->Address.SpecificFlags;
    Flags = Resource->Address.Flags;

    AcpiDmIndent (Level);

    /* Validate ResourceType */

    if ((ResourceType > 2) && (ResourceType < 0xC0))
    {
        AcpiOsPrintf (
            "/**** Invalid Resource Type: 0x%X ****/", ResourceType);
        return;
    }

    /* Prefix is either Word, DWord, QWord, or Extended */

    AcpiDmAddressPrefix (Type);

    /* Resource Types above 0xC0 are vendor-defined */

    if (ResourceType > 2)
    {
        AcpiOsPrintf ("Space (0x%2.2X, ", ResourceType);
        AcpiDmSpaceFlags (Flags);
        AcpiOsPrintf (" 0x%2.2X,", SpecificFlags);
        return;
    }

    /* This is either a Memory, IO, or BusNumber descriptor (0,1,2) */

    AcpiOsPrintf ("%s (",
        AcpiGbl_WordDecode [ACPI_GET_2BIT_FLAG (ResourceType)]);

    /* Decode the general and type-specific flags */

    if (ResourceType == ACPI_MEMORY_RANGE)
    {
        AcpiDmMemoryFlags (Flags, SpecificFlags);
    }
    else /* IO range or BusNumberRange */
    {
        AcpiDmIoFlags (Flags);
        if (ResourceType == ACPI_IO_RANGE)
        {
            AcpiOsPrintf (" %s,",
                AcpiGbl_RngDecode [ACPI_GET_2BIT_FLAG (SpecificFlags)]);
        }
    }
}

开发者ID:ColinIanKing，项目名称:fwts，代码行数:61，代码来源:dmresrcl.c

示例13: AcpiDmAscendingOp

static ACPI_STATUS
AcpiDmAscendingOp (
    ACPI_PARSE_OBJECT       *Op,
    UINT32                  Level,
    void                    *Context)
{
    ACPI_OP_WALK_INFO       *Info = Context;
    ACPI_PARSE_OBJECT       *ParentOp;


    if (Op->Common.DisasmFlags & ACPI_PARSEOP_IGNORE)
    {
        /* Ignore this op -- it was handled elsewhere */

        return (AE_OK);
    }

    if ((Level == 0) && (Op->Common.AmlOpcode == AML_SCOPE_OP))
    {
        /* Indicates the end of the current descriptor block (table) */

        AcpiOsPrintf ("}\n\n");
        return (AE_OK);
    }

    switch (AcpiDmBlockType (Op))
    {
    case BLOCK_PAREN:

        /* Completed an op that has arguments, add closing paren */

        AcpiOsPrintf (")");

        if (Op->Common.AmlOpcode == AML_NAME_OP)
        {
            /* Emit description comment for Name() with a predefined ACPI name */

            AcpiDmPredefinedDescription (Op);
        }
        else
        {
            /* For Create* operators, attempt to emit resource tag description */

            AcpiDmFieldPredefinedDescription (Op);
        }

        /* Could be a nested operator, check if comma required */

        if (!AcpiDmCommaIfListMember (Op))
        {
            if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) &&
                     (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMLIST)) &&
                     (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP))
            {
                /*
                 * This is a first-level element of a term list
                 * start a new line
                 */
                if (!(Info->Flags & ACPI_PARSEOP_PARAMLIST))
                {
                    AcpiOsPrintf ("\n");
                }
            }
        }
        break;


    case BLOCK_BRACE:
    case (BLOCK_BRACE | BLOCK_PAREN):

        /* Completed an op that has a term list, add closing brace */

        if (Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST)
        {
            AcpiOsPrintf ("}");
        }
        else
        {
            AcpiDmIndent (Level);
            AcpiOsPrintf ("}");
        }

        AcpiDmCommaIfListMember (Op);

        if (AcpiDmBlockType (Op->Common.Parent) != BLOCK_PAREN)
        {
            AcpiOsPrintf ("\n");
            if (!(Op->Common.DisasmFlags & ACPI_PARSEOP_EMPTY_TERMLIST))
            {
                if ((Op->Common.AmlOpcode == AML_IF_OP)  &&
                    (Op->Common.Next) &&
                    (Op->Common.Next->Common.AmlOpcode == AML_ELSE_OP))
                {
                    break;
                }

                if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) &&
                    (!Op->Common.Next))
                {
                    break;
//.........这里部分代码省略.........

开发者ID:Jyang772，项目名称:XEOS，代码行数:101，代码来源:dmwalk.c

示例14: AcpiDmDescendingOp


//.........这里部分代码省略.........
            return (AE_OK);
        }
    }
    else if ((AcpiDmBlockType (Op->Common.Parent) & BLOCK_BRACE) &&
         (!(Op->Common.DisasmFlags & ACPI_PARSEOP_PARAMETER_LIST)) &&
         (!(Op->Common.DisasmFlags & ACPI_PARSEOP_ELSEIF)) &&
         (Op->Common.AmlOpcode != AML_INT_BYTELIST_OP))
    {
        /*
         * This is a first-level element of a term list,
         * indent a new line
         */
        switch (Op->Common.AmlOpcode)
        {
        case AML_NOOP_OP:
            /*
             * Optionally just ignore this opcode. Some tables use
             * NoOp opcodes for "padding" out packages that the BIOS
             * changes dynamically. This can leave hundreds or
             * thousands of NoOp opcodes that if disassembled,
             * cannot be compiled because they are syntactically
             * incorrect.
             */
            if (AcpiGbl_IgnoreNoopOperator)
            {
                Op->Common.DisasmFlags |= ACPI_PARSEOP_IGNORE;
                return (AE_OK);
            }

            /* Fallthrough */

        default:

            AcpiDmIndent (Level);
            break;
        }

        Info->LastLevel = Level;
        Info->Count = 0;
    }

    /*
     * This is an inexpensive mechanism to try and keep lines from getting
     * too long. When the limit is hit, start a new line at the previous
     * indent plus one. A better but more expensive mechanism would be to
     * keep track of the current column.
     */
    Info->Count++;
    if (Info->Count /* +Info->LastLevel */ > 12)
    {
        Info->Count = 0;
        AcpiOsPrintf ("\n");
        AcpiDmIndent (Info->LastLevel + 1);
    }

    /* If ASL+ is enabled, check for a C-style operator */

    if (AcpiDmCheckForSymbolicOpcode (Op, Info))
    {
        return (AE_OK);
    }

    /* Print the opcode name */

    AcpiDmDisassembleOneOp (NULL, Info, Op);

开发者ID:derekmarcotte，项目名称:freebsd，代码行数:66，代码来源:dmwalk.c

注：本文中的AcpiDmIndent函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。