• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ ASSERT_ALWAYS函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中ASSERT_ALWAYS函数的典型用法代码示例。如果您正苦于以下问题：C++ ASSERT_ALWAYS函数的具体用法？C++ ASSERT_ALWAYS怎么用？C++ ASSERT_ALWAYS使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ASSERT_ALWAYS函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: check_inf_nan

static void
check_inf_nan (void)
{
  /* only if nans and infs are available */
#if _GMP_IEEE_FLOATS && !defined(MPFR_ERRDIVZERO)
  mpfr_t  x;
  double  d;

  mpfr_init2 (x, 123);

  mpfr_set_inf (x, 1);
  d = mpfr_get_d (x, MPFR_RNDZ);
  ASSERT_ALWAYS (d > 0);
  ASSERT_ALWAYS (DOUBLE_ISINF (d));

  mpfr_set_inf (x, -1);
  d = mpfr_get_d (x, MPFR_RNDZ);
  ASSERT_ALWAYS (d < 0);
  ASSERT_ALWAYS (DOUBLE_ISINF (d));

  mpfr_set_nan (x);
  d = mpfr_get_d (x, MPFR_RNDZ);
  ASSERT_ALWAYS (DOUBLE_ISNAN (d));

  mpfr_clear (x);
#endif
}
开发者ID:Canar，项目名称:mpfr，代码行数:27，代码来源:tget_d.c


示例2: check_inf_nan

static void
check_inf_nan (void)
{
  /* only if nans and infs are available */
#if _GMP_IEEE_FLOATS
  mpfr_t  x;
  double  d;
  long    exp;

  mpfr_init2 (x, 123);

  mpfr_set_inf (x, 1);
  d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
  ASSERT_ALWAYS (d > 0);
  ASSERT_ALWAYS (DOUBLE_ISINF (d));

  mpfr_set_inf (x, -1);
  d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
  ASSERT_ALWAYS (d < 0);
  ASSERT_ALWAYS (DOUBLE_ISINF (d));

  mpfr_set_nan (x);
  d = mpfr_get_d_2exp (&exp, x, MPFR_RNDZ);
  ASSERT_ALWAYS (DOUBLE_ISNAN (d));

  mpfr_clear (x);
#endif
}
开发者ID:Distrotech，项目名称:mpfr，代码行数:28，代码来源:tget_d_2exp.c


示例3: fun_fscanf

int
fun_fscanf (const char *input, const char *fmt, void *a1, void *a2)
{
  FILE  *fp;
  int   ret;

  fp = fopen (TEMPFILE, "w+");
  ASSERT_ALWAYS (fp != NULL);
  ASSERT_ALWAYS (fputs (input, fp) != EOF);
  ASSERT_ALWAYS (fflush (fp) == 0);
  rewind (fp);

  if (a2 == NULL)
    ret = fscanf (fp, fmt, a1);
  else
    ret = fscanf (fp, fmt, a1, a2);

  got_ftell = ftell (fp);
  ASSERT_ALWAYS (got_ftell != -1L);

  fromstring_next_c = getc (fp);

  ASSERT_ALWAYS (fclose (fp) == 0);
  return ret;
}
开发者ID:KrisChaplin，项目名称:LRT2x4_v1.0.2.06_GPL_source，代码行数:25，代码来源:t-scanf.c


示例4: xrange

/*
max_freq = 10000000
for prescaler in xrange(int(TIMEVT_INPUT_CLOCK / float(max_freq) + 0.5), 65535 + 1):
    if TIMEVT_INPUT_CLOCK % prescaler:
            continue
    if int(1e9) % (TIMEVT_INPUT_CLOCK / prescaler):
            continue
    print prescaler, TIMEVT_INPUT_CLOCK / prescaler, int(1e9) / (TIMEVT_INPUT_CLOCK / prescaler)
 */
void motor_timer_init(void)
{
	chSysDisable();

	// Power-on and reset
	TIMEVT_RCC_ENR |= TIMEVT_RCC_ENR_MASK;
	TIMEVT_RCC_RSTR |=  TIMEVT_RCC_RSTR_MASK;
	TIMEVT_RCC_RSTR &= ~TIMEVT_RCC_RSTR_MASK;

	TIMSTP_RCC_ENR |= TIMSTP_RCC_ENR_MASK;
	TIMSTP_RCC_RSTR |=  TIMSTP_RCC_RSTR_MASK;
	TIMSTP_RCC_RSTR &= ~TIMSTP_RCC_RSTR_MASK;

	chSysEnable();

	// Find the optimal prescaler value
	uint32_t prescaler = (uint32_t)(TIMEVT_INPUT_CLOCK / ((float)MAX_FREQUENCY)); // Initial value
	if (prescaler < 1)
		prescaler = 1;

	for (;; prescaler++) {
		ASSERT_ALWAYS(prescaler < 0xFFFF);

		if (TIMEVT_INPUT_CLOCK % prescaler) {
			continue;
		}
		const uint32_t prescaled_clock = TIMEVT_INPUT_CLOCK / prescaler;
		if (INT_1E9 % prescaled_clock) {
			continue;
		}
		break; // Ok, current prescaler value can divide the timer frequency with no remainder
	}
	_nanosec_per_tick = INT_1E9 / (TIMEVT_INPUT_CLOCK / prescaler);
	ASSERT_ALWAYS(_nanosec_per_tick < 1000);      // Make sure it is sane

	printf("Motor: Timer resolution: %u nanosec\n", (unsigned)_nanosec_per_tick);

	// Enable IRQ
	nvicEnableVector(TIMEVT_IRQn,  MOTOR_IRQ_PRIORITY_MASK);
	nvicEnableVector(TIMSTP_IRQn,  MOTOR_IRQ_PRIORITY_MASK);

	// Start the event timer
	TIMEVT->ARR = 0xFFFF;
	TIMEVT->PSC = (uint16_t)(prescaler - 1);
	TIMEVT->CR1 = TIM_CR1_URS;
	TIMEVT->SR  = 0;
	TIMEVT->EGR = TIM_EGR_UG;     // Reload immediately
	TIMEVT->CR1 = TIM_CR1_CEN;    // Start

	// Start the timestamping timer
	TIMSTP->ARR = 0xFFFF;
	TIMSTP->PSC = (uint16_t)(prescaler - 1);
	TIMSTP->CR1 = TIM_CR1_URS;
	TIMSTP->SR  = 0;
	TIMSTP->EGR = TIM_EGR_UG;     // Reload immediately
	TIMSTP->DIER = TIM_DIER_UIE;
	TIMSTP->CR1 = TIM_CR1_CEN;    // Start
}
开发者ID:Aerobota，项目名称:sapog，代码行数:67，代码来源:motor_timer.c


示例5: adc_calibrate

static void adc_calibrate(ADC_TypeDef* const adc)
{
	// RSTCAL
	ASSERT_ALWAYS(!(adc->CR2 & ADC_CR2_RSTCAL));
	adc->CR2 |= ADC_CR2_RSTCAL;
	while (adc->CR2 & ADC_CR2_RSTCAL) { }

	// CAL
	ASSERT_ALWAYS(!(adc->CR2 & ADC_CR2_CAL));
	adc->CR2 |= ADC_CR2_CAL;
	while (adc->CR2 & ADC_CR2_CAL) { }
}
开发者ID:branux，项目名称:sapog，代码行数:12，代码来源:motor_adc.c


示例6: hubii_eint_init

void
hubii_eint_init(cnodeid_t cnode)
{
    int			bit, rv;
    ii_iidsr_u_t    	hubio_eint;
    hubinfo_t		hinfo; 
    cpuid_t		intr_cpu;
    devfs_handle_t 	hub_v;
    ii_ilcsr_u_t	ilcsr;
    int bit_pos_to_irq(int bit);
    int synergy_intr_connect(int bit, int cpuid);


    hub_v = (devfs_handle_t)cnodeid_to_vertex(cnode);
    ASSERT_ALWAYS(hub_v);
    hubinfo_get(hub_v, &hinfo);

    ASSERT(hinfo);
    ASSERT(hinfo->h_cnodeid == cnode);

    ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);

    if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
	/* 
	 * HUB II link is not up. 
	 * Just disable LLP, and don't connect any interrupts.
	 */
	ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
	REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
	return;
    }
    /* Select a possible interrupt target where there is a free interrupt
     * bit and also reserve the interrupt bit for this IO error interrupt
     */
    intr_cpu = intr_heuristic(hub_v,0,INTRCONNECT_ANYBIT,II_ERRORINT,hub_v,
			      "HUB IO error interrupt",&bit);
    if (intr_cpu == CPU_NONE) {
	printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
	return;
    }
	
    rv = intr_connect_level(intr_cpu, bit, 0, NULL);
    synergy_intr_connect(bit, intr_cpu);
    request_irq(bit_pos_to_irq(bit) + (intr_cpu << 8), hubii_eint_handler, 0, "SN hub error", (void *)hub_v);
    ASSERT_ALWAYS(rv >= 0);
    hubio_eint.ii_iidsr_regval = 0;
    hubio_eint.ii_iidsr_fld_s.i_enable = 1;
    hubio_eint.ii_iidsr_fld_s.i_level = bit;/* Take the least significant bits*/
    hubio_eint.ii_iidsr_fld_s.i_node = COMPACT_TO_NASID_NODEID(cnode);
    hubio_eint.ii_iidsr_fld_s.i_pi_id = cpuid_to_subnode(intr_cpu);
    REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, hubio_eint.ii_iidsr_regval);

}
开发者ID:ya-mouse，项目名称:cnu-680pro，代码行数:53，代码来源:huberror.c


示例7: hubii_eint_init

void
hubii_eint_init(cnodeid_t cnode)
{
    int			bit, rv;
    ii_iidsr_u_t    	hubio_eint;
    hubinfo_t		hinfo; 
    cpuid_t		intr_cpu;
    vertex_hdl_t 	hub_v;
    int bit_pos_to_irq(int bit);
    ii_ilcsr_u_t	ilcsr;


    hub_v = (vertex_hdl_t)cnodeid_to_vertex(cnode);
    ASSERT_ALWAYS(hub_v);
    hubinfo_get(hub_v, &hinfo);

    ASSERT(hinfo);
    ASSERT(hinfo->h_cnodeid == cnode);

    ilcsr.ii_ilcsr_regval = REMOTE_HUB_L(hinfo->h_nasid, IIO_ILCSR);
    if ((ilcsr.ii_ilcsr_fld_s.i_llp_stat & 0x2) == 0) {
	/*
	 * HUB II link is not up.  Disable LLP. Clear old errors.
	 * Enable interrupts to handle BTE errors.
	 */
	ilcsr.ii_ilcsr_fld_s.i_llp_en = 0;
	REMOTE_HUB_S(hinfo->h_nasid, IIO_ILCSR, ilcsr.ii_ilcsr_regval);
    }

    /* Select a possible interrupt target where there is a free interrupt
     * bit and also reserve the interrupt bit for this IO error interrupt
     */
    intr_cpu = intr_heuristic(hub_v,0,SGI_II_ERROR,0,hub_v,
			      "HUB IO error interrupt",&bit);
    if (intr_cpu == CPU_NONE) {
	printk("hubii_eint_init: intr_reserve_level failed, cnode %d", cnode);
	return;
    }
	
    rv = intr_connect_level(intr_cpu, SGI_II_ERROR, 0, NULL);
    request_irq(SGI_II_ERROR, hubii_eint_handler, SA_SHIRQ, "SN_hub_error", (void *)hub_v);
    irq_desc(bit)->status |= SN2_IRQ_PER_HUB;
    ASSERT_ALWAYS(rv >= 0);
    hubio_eint.ii_iidsr_regval = 0;
    hubio_eint.ii_iidsr_fld_s.i_enable = 1;
    hubio_eint.ii_iidsr_fld_s.i_level = bit;/* Take the least significant bits*/
    hubio_eint.ii_iidsr_fld_s.i_node = COMPACT_TO_NASID_NODEID(cnode);
    hubio_eint.ii_iidsr_fld_s.i_pi_id = cpuid_to_subnode(intr_cpu);
    REMOTE_HUB_S(hinfo->h_nasid, IIO_IIDSR, hubio_eint.ii_iidsr_regval);

}
开发者ID:romanalexander，项目名称:Trickles，代码行数:51，代码来源:shuberror.c


示例8: check_one

void
check_one (mpf_srcptr src, mpf_srcptr trunc, mpf_srcptr ceil, mpf_srcptr floor)
{
  mpf_t  got;

  mpf_init2 (got, mpf_get_prec (trunc));
  ASSERT_ALWAYS (PREC(got) == PREC(trunc));
  ASSERT_ALWAYS (PREC(got) == PREC(ceil));
  ASSERT_ALWAYS (PREC(got) == PREC(floor));

#define CHECK_SEP(name, fun, want)              \
  mpf_set_ui (got, 54321L); /* initial junk */  \
  fun (got, src);                               \
  MPF_CHECK_FORMAT (got);                       \
  if (mpf_cmp (got, want) != 0)                 \
    {                                           \
	printf ("%s wrong\n", name);            \
	check_print (src, got, want);           \
	abort ();                               \
    }

  CHECK_SEP ("mpf_trunc", mpf_trunc, trunc);
  CHECK_SEP ("mpf_ceil",  mpf_ceil,  ceil);
  CHECK_SEP ("mpf_floor", mpf_floor, floor);

#define CHECK_INPLACE(name, fun, want)  \
  mpf_set (got, src);                   \
  fun (got, got);                       \
  MPF_CHECK_FORMAT (got);               \
  if (mpf_cmp (got, want) != 0)         \
    {                                   \
	printf ("%s wrong\n", name);    \
	check_print (src, got, want);   \
	abort ();                       \
    }

  CHECK_INPLACE ("mpf_trunc", mpf_trunc, trunc);

  /* Can't do these unconditionally in case truncation by mpf_set strips
     some low non-zero limbs which would have rounded the result.  */
  if (ABSIZ(src) <= PREC(trunc)+1)
    {
      CHECK_INPLACE ("mpf_ceil",  mpf_ceil,  ceil);
      CHECK_INPLACE ("mpf_floor", mpf_floor, floor);
    }

  mpf_clear (got);
}
开发者ID:AllardJ，项目名称:Tomato，代码行数:48，代码来源:t-trunc.c


示例9: check_fib_table

void
check_fib_table (void)
{
  int  i;
  for (i = 1; i <= FIB_TABLE_LIMIT; i++)
    ASSERT_ALWAYS (FIB_TABLE(i) != 0);
}
开发者ID:mahdiz，项目名称:mpclib，代码行数:7，代码来源:t-fib_ui.c


示例10: mlreset

void
mlreset(int slave)
{
	if (!slave) {
		/*
		 * We are the master cpu and node.
		 */ 
		master_nasid = get_nasid();
		set_master_bridge_base();

		/* We're the master processor */
		master_procid = smp_processor_id();
		master_nasid = cpuid_to_nasid(master_procid);

		/*
		 * master_nasid we get back better be same as one from
		 * get_nasid()
		 */
		ASSERT_ALWAYS(master_nasid == get_nasid());

		/* early initialization of iograph */
		iograph_early_init();

		/* Initialize Hub Pseudodriver Management */
		hubdev_init();

	} else { /* slave != 0 */
		/*
		 * This code is performed ONLY by slave processors.
		 */

	}
}
开发者ID:dduval，项目名称:kernel-rhel3，代码行数:33，代码来源:ml_SN_init.c


示例11: mpn_redc_n

void
mpn_redc_n (mp_ptr rp, mp_ptr up, mp_srcptr mp, mp_size_t n, mp_srcptr ip)
{
  mp_ptr xp, yp, scratch;
  mp_limb_t cy;
  mp_size_t rn;
  TMP_DECL;
  TMP_MARK;

  ASSERT (n > 8);

  rn = mpn_mulmod_bnm1_next_size (n);

  scratch = TMP_ALLOC_LIMBS (n + rn + mpn_mulmod_bnm1_itch (rn, n, n));

  xp = scratch;
  mpn_mullo_n (xp, up, ip, n);

  yp = scratch + n;
  mpn_mulmod_bnm1 (yp, rn, xp, n, mp, n, scratch + n + rn);

  ASSERT_ALWAYS (2 * n > rn);				/* could handle this */

  cy = mpn_sub_n (yp + rn, yp, up, 2*n - rn);		/* undo wrap around */
  MPN_DECR_U (yp + 2*n - rn, rn, cy);

  cy = mpn_sub_n (rp, up + n, yp + n, n);
  if (cy != 0)
    mpn_add_n (rp, rp, mp, n);

  TMP_FREE;
}
开发者ID:AlexeiSheplyakov，项目名称:gmp.pkg，代码行数:32，代码来源:redc_n.c


示例12: check_various

void
check_various (void)
{
  mpf_t got;
  mpq_t q;

  mpf_init (got);
  mpq_init (q);

  /* 1/1 == 1 */
  mpf_set_prec (got, 20L);
  mpq_set_ui (q, 1L, 1L);
  mpf_set_q (got, q);
  MPF_CHECK_FORMAT (got);
  ASSERT_ALWAYS (mpf_cmp_ui (got, 1L) == 0);

  /* 1/(2^n+1), a case where truncating the divisor would be wrong */
  mpf_set_prec (got, 500L);
  mpq_set_ui (q, 1L, 1L);
  mpz_mul_2exp (mpq_denref(q), mpq_denref(q), 800L);
  mpz_add_ui (mpq_denref(q), mpq_denref(q), 1L);
  check_one (got, q);

  mpf_clear (got);
  mpq_clear (q);
}
开发者ID:BrianGladman，项目名称:mpir，代码行数:26，代码来源:t-set_q.c


示例13: check_various

void
check_various (void)
{
  mpf_t got, u, v;

  mpf_init (got);
  mpf_init (u);
  mpf_init (v);

  /* 100/4 == 25 */
  mpf_set_prec (got, 20L);
  mpf_set_ui (u, 100L);
  mpf_set_ui (v, 4L);
  mpf_div (got, u, v);
  MPF_CHECK_FORMAT (got);
  ASSERT_ALWAYS (mpf_cmp_ui (got, 25L) == 0);

  /* 1/(2^n+1), a case where truncating the divisor would be wrong */
  mpf_set_prec (got, 500L);
  mpf_set_prec (v, 900L);
  mpf_set_ui (v, 1L);
  mpf_mul_2exp (v, v, 800L);
  mpf_add_ui (v, v, 1L);
  mpf_div (got, u, v);
  check_one ("1/2^n+1, separate", got, u, v);

  mpf_clear (got);
  mpf_clear (u);
  mpf_clear (v);
}
开发者ID:AlexeiSheplyakov，项目名称:gmp.pkg，代码行数:30，代码来源:t-div.c


示例14: _vic_set_interrupt_vector

void _vic_set_interrupt_vector(OS_InterruptVector isr, UINT32 index)
{
	// VIC0
	if(index < 32)			
	{
		*VIC0VECTADDR(index) = (UINT32) isr;
	}
	// VIC1
	else if(index < 64) 		
	{
		*VIC1VECTADDR(index - 32) = (UINT32) isr;
	}
	// VIC2
	else if(index < 96) 
	{
		*VIC2VECTADDR(index - 64) = (UINT32) isr;
	}
	// VIC3
	else if(index < 128) 
	{
		*VIC3VECTADDR(index - 96) = (UINT32) isr;
	}
	else
	{
		ASSERT_ALWAYS("Invalid interrupt index");
	}
	
	return;
}
开发者ID:bbhat，项目名称:charm，代码行数:29，代码来源:vic.c


示例15: check_one

void
check_one (const char *desc, mpf_ptr got, mpf_srcptr u, mpir_ui v)
{
  mp_size_t  usize, usign;
  mp_ptr     wp;
  mpf_t      want;

  MPF_CHECK_FORMAT (got);

  /* this code not nailified yet */
  ASSERT_ALWAYS (BITS_PER_UI <= GMP_NUMB_BITS);
  usign = SIZ (u);
  usize = ABS (usign);
  wp = refmpn_malloc_limbs (usize + 1);
  wp[usize] = mpn_mul_1 (wp, PTR(u), usize, (mp_limb_t) v);

  PTR(want) = wp;
  SIZ(want) = (usign >= 0 ? usize+1 : -(usize+1));
  EXP(want) = EXP(u) + 1;
  refmpf_normalize (want);

  if (! refmpf_validate ("mpf_mul_ui", got, want))
    {
      mp_trace_base = -16;
      printf    ("  %s\n", desc);
      mpf_trace ("  u", u);
      printf    ("  v %ld  0x%lX\n", v, v);
      abort ();
    }

  free (wp);
}
开发者ID:BrianGladman，项目名称:mpir，代码行数:32，代码来源:t-mul_ui.c


示例16: mpz_to_mpn

static void
mpz_to_mpn (mp_ptr ap, mp_size_t an, const mpz_t b)
{
  mp_size_t bn = mpz_size (b);
  ASSERT_ALWAYS (bn <= an);
  MPN_COPY_INCR (ap, mpz_limbs_read (b), bn);
  MPN_ZERO (ap + bn, an - bn);
}
开发者ID:ChristopherRussell，项目名称:gap，代码行数:8，代码来源:t-minvert.c


示例17: my__gmpn_tdiv_qr

void
my__gmpn_tdiv_qr (mp_ptr qp, mp_ptr rp, mp_size_t qxn,
mp_srcptr np, mp_size_t nn, mp_srcptr dp, mp_size_t dn)
{
	ASSERT_ALWAYS (qxn == 0);

	ASSERT (nn >= 0);
	ASSERT (dn >= 0);
	ASSERT (dn == 0 || dp[dn - 1] != 0);
	ASSERT (! MPN_OVERLAP_P (qp, nn - dn + 1 + qxn, np, nn));
	ASSERT (! MPN_OVERLAP_P (qp, nn - dn + 1 + qxn, dp, dn));

	int adjust;
	gmp_pi1_t dinv;
	TMP_DECL;
	TMP_MARK;
								 /* conservative tests for quotient size */
	adjust = np[nn - 1] >= dp[dn - 1];
	mp_ptr n2p, d2p;
	mp_limb_t cy;
	int cnt;

	qp[nn - dn] = 0;			 /* zero high quotient limb */
	count_leading_zeros (cnt, dp[dn - 1]);
	cnt -= GMP_NAIL_BITS;
	d2p = TMP_ALLOC_LIMBS (dn);
	mpn_lshift (d2p, dp, dn, cnt);

	for (int i=0; i<dn; i+=1)
	{
		printf("d2p %08x\n", *( (int*) (((void*)(d2p))+(i*4))));
	}


	n2p = TMP_ALLOC_LIMBS (nn + 1);
	cy = mpn_lshift (n2p, np, nn, cnt);
	for (int i=0; i<nn; i+=1)
	{
		printf("n2p %08x\n", *( (int*) (((void*)(n2p))+(i*4))));
	}
	n2p[nn] = cy;
	nn += adjust;

        printf("d2p[dn-1] = %08lx\nd2p[dn-2] = %08lx\n", d2p[dn-1], d2p[dn-2]);
	invert_pi1 (dinv, d2p[dn - 1], d2p[dn - 2]);
        printf("dinv %08lx\n", dinv.inv32);
	my_mpn_sbpi1_div_qr (qp, n2p, nn, d2p, dn, dinv.inv32);
	for (int i=0; i<nn; i+=1)
	{
		printf("inside qp %08x\n", *( (int*) (((void*)(qp))+(i*4))));
	}
	n2p[nn] = cy;

	mpn_rshift (rp, n2p, dn, cnt);
	TMP_FREE;
	return;

}
开发者ID:ysangkok，项目名称:gmp-emscripten-tests，代码行数:58，代码来源:my_tdiv_qr.c


示例18: do_hub_intr_alloc

static hub_intr_t
do_hub_intr_alloc(devfs_handle_t dev,
		device_desc_t dev_desc,
		devfs_handle_t owner_dev,
		int uncond_nothread)
{
	cpuid_t		cpu = 0;
	int		vector;
	hub_intr_t	intr_hdl;
	cnodeid_t	cnode;
	int		cpuphys, slice;
	int		nasid;
	iopaddr_t	xtalk_addr;
	struct xtalk_intr_s	*xtalk_info;
	xwidget_info_t	xwidget_info;
	ilvl_t		intr_swlevel = 0;

	cpu = intr_heuristic(dev, dev_desc, -1, 0, owner_dev, NULL, &vector);

	if (cpu == CPU_NONE) {
		printk("Unable to allocate interrupt for 0x%p\n", (void *)owner_dev);
		return(0);
	}

	cpuphys = cpu_physical_id(cpu);
	slice = cpu_physical_id_to_slice(cpuphys);
	nasid = cpu_physical_id_to_nasid(cpuphys);
	cnode = cpuid_to_cnodeid(cpu);

	if (slice) {
		xtalk_addr = SH_II_INT1 | GLOBAL_MMR_SPACE |
			((unsigned long)nasid << 36) | (1UL << 47);
	} else {
		xtalk_addr = SH_II_INT0 | GLOBAL_MMR_SPACE |
			((unsigned long)nasid << 36) | (1UL << 47);
	}

	intr_hdl = snia_kmem_alloc_node(sizeof(struct hub_intr_s), KM_NOSLEEP, cnode);
	ASSERT_ALWAYS(intr_hdl);

	xtalk_info = &intr_hdl->i_xtalk_info;
	xtalk_info->xi_dev = dev;
	xtalk_info->xi_vector = vector;
	xtalk_info->xi_addr = xtalk_addr;

	xwidget_info = xwidget_info_get(dev);
	if (xwidget_info) {
		xtalk_info->xi_target = xwidget_info_masterid_get(xwidget_info);
	}

	intr_hdl->i_swlevel = intr_swlevel;
	intr_hdl->i_cpuid = cpu;
	intr_hdl->i_bit = vector;
	intr_hdl->i_flags |= HUB_INTR_IS_ALLOCED;

	hub_device_desc_update(dev_desc, intr_swlevel, cpu);
	return(intr_hdl);
}
开发者ID:muromec，项目名称:linux-ezxdev，代码行数:58，代码来源:shub_intr.c


示例19: Run

void Run(){
	TestRunnerThread runner;
	runner.start();

	nitki::Thread::sleep(1000);

	ASSERT_ALWAYS(runner.success)

	runner.join();
}
开发者ID:dgu123，项目名称:nitki，代码行数:10，代码来源:tests.cpp


示例20: ThreadGetHandle

HANDLE ThreadGetHandle(DWORD ThreadId)
{
    SHARED_ACQUIRE(LockThreads);

    if(threadList.find(ThreadId) != threadList.end())
        return threadList[ThreadId].Handle;

    ASSERT_ALWAYS("Trying to get handle of a thread that doesn't exist!");
    return nullptr;
}
开发者ID:V10git，项目名称:x64dbg，代码行数:10，代码来源:thread.cpp



注：本文中的ASSERT_ALWAYS函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ ASSERT_ARG函数代码示例发布时间：2022-05-30
下一篇：
C++ ASSERTSZ函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap