本文整理汇总了C++中ASIO_MOVE_CAST函数的典型用法代码示例。如果您正苦于以下问题：C++ ASIO_MOVE_CAST函数的具体用法？C++ ASIO_MOVE_CAST怎么用？C++ ASIO_MOVE_CAST使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了ASIO_MOVE_CAST函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: read_op
read_op(AsyncReadStream& stream, const std::array<Elem, 2>& buffers,
CompletionCondition completion_condition, ReadHandler& handler)
: detail::base_from_completion_cond<
CompletionCondition>(completion_condition),
stream_(stream),
buffers_(buffers),
start_(0),
total_transferred_(0),
handler_(ASIO_MOVE_CAST(ReadHandler)(handler))
{
}
开发者ID:4nc3str4l，项目名称:LostEngine，代码行数:11，代码来源:read.hpp
示例2: win_iocp_socket_recvmsg_op
win_iocp_socket_recvmsg_op(
socket_ops::weak_cancel_token_type cancel_token,
const MutableBufferSequence& buffers,
socket_base::message_flags& out_flags, Handler& handler)
: operation(&win_iocp_socket_recvmsg_op::do_complete),
cancel_token_(cancel_token),
buffers_(buffers),
out_flags_(out_flags),
handler_(ASIO_MOVE_CAST(Handler)(handler))
{
}
开发者ID:AliAkbarMontazeri，项目名称:AtomicGameEngine，代码行数:11，代码来源:win_iocp_socket_recvmsg_op.hpp
示例3: connect_op
connect_op(basic_socket<Protocol, SocketService>& sock,
const Iterator& begin, const Iterator& end,
const ConnectCondition& connect_condition,
ComposedConnectHandler& handler)
: base_from_connect_condition<ConnectCondition>(connect_condition),
socket_(sock),
iter_(begin),
end_(end),
start_(0),
handler_(ASIO_MOVE_CAST(ComposedConnectHandler)(handler))
{
}
开发者ID:kevinlovesing，项目名称:resiprocate，代码行数:12，代码来源:connect.hpp
示例4: read_op
read_op(AsyncReadStream& stream,
const asio::mutable_buffers_1& buffers,
CompletionCondition completion_condition,
ReadHandler& handler)
: detail::base_from_completion_cond<
CompletionCondition>(completion_condition),
stream_(stream),
buffer_(buffers),
total_transferred_(0),
handler_(ASIO_MOVE_CAST(ReadHandler)(handler))
{
}
开发者ID:Almamu，项目名称:evemu_crucible，代码行数:12，代码来源:read.hpp
示例5: read_at_op
read_at_op(AsyncRandomAccessReadDevice& device,
boost::uint64_t offset, const asio::mutable_buffers_1& buffers,
CompletionCondition completion_condition, ReadHandler& handler)
: detail::base_from_completion_cond<
CompletionCondition>(completion_condition),
device_(device),
offset_(offset),
buffer_(buffers),
total_transferred_(0),
handler_(ASIO_MOVE_CAST(ReadHandler)(handler))
{
}
开发者ID:BorisSchaeling，项目名称:asio，代码行数:12，代码来源:read_at.hpp
示例6: win_iocp_socket_recvfrom_op
win_iocp_socket_recvfrom_op(Endpoint& endpoint,
socket_ops::weak_cancel_token_type cancel_token,
const MutableBufferSequence& buffers, Handler& handler)
: operation(&win_iocp_socket_recvfrom_op::do_complete),
endpoint_(endpoint),
endpoint_size_(static_cast<int>(endpoint.capacity())),
cancel_token_(cancel_token),
buffers_(buffers),
handler_(ASIO_MOVE_CAST(Handler)(handler))
{
handler_work<Handler>::start(handler_);
}
开发者ID:Ahbee，项目名称:Cinder，代码行数:12，代码来源:win_iocp_socket_recvfrom_op.hpp
示例7: write_at_op
write_at_op(AsyncRandomAccessWriteDevice& device,
boost::uint64_t offset, const ConstBufferSequence& buffers,
CompletionCondition completion_condition, WriteHandler& handler)
: detail::base_from_completion_cond<
CompletionCondition>(completion_condition),
device_(device),
offset_(offset),
buffers_(buffers),
total_transferred_(0),
handler_(ASIO_MOVE_CAST(WriteHandler)(handler))
{
}
开发者ID:Almamu，项目名称:evemu_crucible，代码行数:12，代码来源:write_at.hpp
示例8: range_connect_op
range_connect_op(basic_socket<Protocol ASIO_SVC_TARG>& sock,
const EndpointSequence& endpoints,
const ConnectCondition& connect_condition,
RangeConnectHandler& handler)
: base_from_connect_condition<ConnectCondition>(connect_condition),
socket_(sock),
endpoints_(endpoints),
index_(0),
start_(0),
handler_(ASIO_MOVE_CAST(RangeConnectHandler)(handler))
{
}
开发者ID:Dagarman，项目名称:mame，代码行数:12，代码来源:connect.hpp
示例9: write_op
write_op(AsyncWriteStream& stream,
const asio::const_buffers_1& buffers,
CompletionCondition completion_condition,
WriteHandler& handler)
: detail::base_from_completion_cond<
CompletionCondition>(completion_condition),
stream_(stream),
buffer_(buffers),
total_transferred_(0),
handler_(ASIO_MOVE_CAST(WriteHandler)(handler))
{
}
开发者ID:Shumen，项目名称:asio，代码行数:12，代码来源:write.hpp
示例10: async_accept
async_accept(basic_socket<Protocol1, SocketService>& peer,
ASIO_MOVE_ARG(AcceptHandler) handler,
typename enable_if<is_convertible<Protocol, Protocol1>::value>::type* = 0)
{
// If you get an error on the following line it means that your handler does
// not meet the documented type requirements for a AcceptHandler.
ASIO_ACCEPT_HANDLER_CHECK(AcceptHandler, handler) type_check;
return this->get_service().async_accept(this->get_implementation(),
peer, static_cast<endpoint_type*>(0),
ASIO_MOVE_CAST(AcceptHandler)(handler));
}
开发者ID:AbdelghaniDr，项目名称:Cinder，代码行数:12，代码来源:basic_socket_acceptor.hpp
示例11: iterator_connect_op
iterator_connect_op(basic_socket<Protocol ASIO_SVC_TARG>& sock,
const Iterator& begin, const Iterator& end,
const ConnectCondition& connect_condition,
IteratorConnectHandler& handler)
: base_from_connect_condition<ConnectCondition>(connect_condition),
socket_(sock),
iter_(begin),
end_(end),
start_(0),
handler_(ASIO_MOVE_CAST(IteratorConnectHandler)(handler))
{
}
开发者ID:Dagarman，项目名称:mame，代码行数:12，代码来源:connect.hpp
示例12: reactive_socket_recv_op
reactive_socket_recv_op( socket_type socket,
socket_ops::state_type state,
const MutableBufferSequence& buffers,
socket_base::message_flags flags,
Handler& handler )
: reactive_socket_recv_op_base<MutableBufferSequence>( socket,
state,
buffers,
flags,
&reactive_socket_recv_op::do_complete ),
handler_( ASIO_MOVE_CAST( Handler )( handler ) )
{
}
开发者ID:obergner，项目名称:wally-io，代码行数:13，代码来源:reactive_socket_recv_op.hpp
示例13: win_iocp_socket_recvmsg_op
win_iocp_socket_recvmsg_op(
socket_ops::weak_cancel_token_type cancel_token,
const MutableBufferSequence& buffers,
socket_base::message_flags& out_flags,
Handler& handler, const IoExecutor& io_ex)
: operation(&win_iocp_socket_recvmsg_op::do_complete),
cancel_token_(cancel_token),
buffers_(buffers),
out_flags_(out_flags),
handler_(ASIO_MOVE_CAST(Handler)(handler)),
io_executor_(io_ex)
{
handler_work<Handler, IoExecutor>::start(handler_, io_executor_);
}
开发者ID:DitansKing，项目名称:asio，代码行数:14，代码来源:win_iocp_socket_recvmsg_op.hpp
示例14: win_iocp_socket_accept_op
win_iocp_socket_accept_op(win_iocp_socket_service_base& socket_service,
socket_type socket, Socket& peer, const Protocol& protocol,
typename Protocol::endpoint* peer_endpoint,
bool enable_connection_aborted, Handler& handler)
: operation(&win_iocp_socket_accept_op::do_complete),
socket_service_(socket_service),
socket_(socket),
peer_(peer),
protocol_(protocol),
peer_endpoint_(peer_endpoint),
enable_connection_aborted_(enable_connection_aborted),
handler_(ASIO_MOVE_CAST(Handler)(handler))
{
}
开发者ID:AbdelghaniDr，项目名称:Cinder，代码行数:14，代码来源:win_iocp_socket_accept_op.hpp
示例15: win_iocp_socket_move_accept_op
win_iocp_socket_move_accept_op(
win_iocp_socket_service_base& socket_service, socket_type socket,
const Protocol& protocol, asio::io_context& peer_io_context,
typename Protocol::endpoint* peer_endpoint,
bool enable_connection_aborted, Handler& handler)
: operation(&win_iocp_socket_move_accept_op::do_complete),
socket_service_(socket_service),
socket_(socket),
peer_(peer_io_context),
protocol_(protocol),
peer_endpoint_(peer_endpoint),
enable_connection_aborted_(enable_connection_aborted),
handler_(ASIO_MOVE_CAST(Handler)(handler))
{
handler_work<Handler>::start(handler_);
}
开发者ID:Aulddays，项目名称:APass，代码行数:16，代码来源:win_iocp_socket_accept_op.hpp
示例16: operator
void operator()(asio::error_code ec, int start = 0)
{
switch (start_ = start)
{
case 1:
for (;;)
{
this->check_condition(ec, iter_, end_);
if (iter_ != end_)
{
socket_.close(ec);
socket_.async_connect(*iter_,
ASIO_MOVE_CAST(connect_op)(*this));
return;
}
if (start)
{
ec = asio::error::not_found;
socket_.get_io_service().post(detail::bind_handler(*this, ec));
return;
}
default:
if (iter_ == end_)
break;
if (!socket_.is_open())
{
ec = asio::error::operation_aborted;
break;
}
if (!ec)
break;
++iter_;
}
handler_(static_cast<const asio::error_code&>(ec),
static_cast<const Iterator&>(iter_));
}
}
开发者ID:kevinlovesing，项目名称:resiprocate，代码行数:45，代码来源:connect.hpp
示例17: operator
void operator()(const asio::error_code& ec,
std::size_t bytes_transferred, int start = 0)
{
switch (start)
{
case 1:
buffers_.prepare(this->check_for_completion(ec, total_transferred_));
for (;;)
{
device_.async_read_some_at(offset_ + total_transferred_,
buffers_, ASIO_MOVE_CAST(read_at_op)(*this));
return; default:
total_transferred_ += bytes_transferred;
buffers_.consume(bytes_transferred);
buffers_.prepare(this->check_for_completion(ec, total_transferred_));
if ((!ec && bytes_transferred == 0)
|| buffers_.begin() == buffers_.end())
break;
}
handler_(ec, static_cast<const std::size_t&>(total_transferred_));
}
}
开发者ID:BorisSchaeling，项目名称:asio，代码行数:23，代码来源:read_at.hpp
示例18: completion_handler
completion_handler(Handler& h)
: operation(&completion_handler::do_complete),
handler_(ASIO_MOVE_CAST(Handler)(h))
{
}
开发者ID:Almamu，项目名称:evemu_crucible，代码行数:5，代码来源:completion_handler.hpp
示例19: winrt_socket_connect_op
winrt_socket_connect_op(Handler& handler)
: winrt_async_op<void>(&winrt_socket_connect_op::do_complete),
handler_(ASIO_MOVE_CAST(Handler)(handler))
{
handler_work<Handler>::start(handler_);
}
开发者ID:DINKIN，项目名称:mongo，代码行数:6，代码来源:winrt_socket_connect_op.hpp
示例20: basic_handle
/**
* This constructor moves a handle from one object to another.
*
* @param other The other basic_handle object from which the move will occur.
*
* @note Following the move, the moved-from object is in the same state as if
* constructed using the @c basic_handle(io_service&) constructor.
*/
basic_handle(basic_handle&& other)
: basic_io_object<HandleService>(
ASIO_MOVE_CAST(basic_handle)(other))
{
}
开发者ID:dvdjg，项目名称:GoapCpp，代码行数:13，代码来源:basic_handle.hpp
注：本文中的ASIO_MOVE_CAST函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论