本文整理汇总了C++中AR_DEBUG_PRINTF函数的典型用法代码示例。如果您正苦于以下问题：C++ AR_DEBUG_PRINTF函数的具体用法？C++ AR_DEBUG_PRINTF怎么用？C++ AR_DEBUG_PRINTF使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了AR_DEBUG_PRINTF函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: HIFUnMaskInterrupt
void
HIFUnMaskInterrupt(HIF_DEVICE *device)
{
int ret;
AR_DEBUG_ASSERT(device != NULL);
AR_DEBUG_ASSERT(device->func != NULL);
AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFUnMaskInterrupt\n"));
/* Register the IRQ Handler */
sdio_claim_host(device->func);
ret = sdio_claim_irq(device->func, hifIRQHandler);
sdio_release_host(device->func);
AR_DEBUG_ASSERT(ret == 0);
}
开发者ID:plaguedbypenguins，项目名称:atheros_sdk2，代码行数:16，代码来源:hif.c
示例2: DevWaitForPendingRecv
A_STATUS DevWaitForPendingRecv(AR6K_DEVICE *pDev,A_UINT32 TimeoutInMs,A_BOOL *pbIsRecvPending)
{
A_STATUS status = A_OK;
A_UCHAR host_int_status = 0x0;
A_UINT32 counter = 0x0;
if(TimeoutInMs < 100)
{
TimeoutInMs = 100;
}
counter = TimeoutInMs / 100;
do
{
//Read the Host Interrupt Status Register
status = HIFReadWrite(pDev->HIFDevice,
HOST_INT_STATUS_ADDRESS,
&host_int_status,
sizeof(A_UCHAR),
HIF_RD_SYNC_BYTE_INC,
NULL);
if(A_FAILED(status))
{
AR_DEBUG_PRINTF(ATH_LOG_ERR,("DevWaitForPendingRecv:Read HOST_INT_STATUS_ADDRESS Failed 0x%X\n",status));
break;
}
host_int_status = A_SUCCESS(status) ? (host_int_status & (1 << 0)):0;
if(!host_int_status)
{
status = A_OK;
*pbIsRecvPending = FALSE;
break;
}
else
{
*pbIsRecvPending = TRUE;
}
A_MDELAY(100);
counter--;
}while(counter);
return status;
}
开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:47，代码来源:ar6k.c
示例3: DevWaitForPendingRecv
int DevWaitForPendingRecv(struct ar6k_device *pDev,u32 TimeoutInMs,bool *pbIsRecvPending)
{
int status = 0;
u8 host_int_status = 0x0;
u32 counter = 0x0;
if(TimeoutInMs < 100)
{
TimeoutInMs = 100;
}
counter = TimeoutInMs / 100;
do
{
//Read the Host Interrupt Status Register
status = HIFReadWrite(pDev->HIFDevice,
HOST_INT_STATUS_ADDRESS,
&host_int_status,
sizeof(u8),
HIF_RD_SYNC_BYTE_INC,
NULL);
if (status)
{
AR_DEBUG_PRINTF(ATH_LOG_ERR,("DevWaitForPendingRecv:Read HOST_INT_STATUS_ADDRESS Failed 0x%X\n",status));
break;
}
host_int_status = !status ? (host_int_status & (1 << 0)):0;
if(!host_int_status)
{
status = 0;
*pbIsRecvPending = false;
break;
}
else
{
*pbIsRecvPending = true;
}
A_MDELAY(100);
counter--;
}while(counter);
return status;
}
开发者ID:ARMP，项目名称:android_kernel_lge_x3，代码行数:47，代码来源:ar6k.c
示例4: hifDeviceSuspend
static int hifDeviceSuspend(struct device *dev)
{
struct sdio_func *func = dev_to_sdio_func(dev);
A_STATUS status = A_OK;
HIF_DEVICE *device;
device = getHifDevice(func);
if (device && device->claimedContext && osdrvCallbacks.deviceSuspendHandler) {
status = osdrvCallbacks.deviceSuspendHandler(device->claimedContext);
}
if (status == A_OK) {
int oldresetvalue = reset_sdio_on_unload;
reset_sdio_on_unload = 1;
hifDisableFunc(device, func);
reset_sdio_on_unload = oldresetvalue;
device->is_suspend = TRUE;
} else if (status == A_EBUSY) {
A_INT32 cnt = 10;
A_UINT8 host_int_status;
do {
while (atomic_read(&device->irqHandling)) {
/* wait until irq handler finished all the jobs */
schedule_timeout(HZ/10);
}
/* check if there is any pending irq due to force done */
host_int_status = 0;
status = HIFReadWrite(device, HOST_INT_STATUS_ADDRESS,
(A_UINT8 *)&host_int_status, sizeof(host_int_status),
HIF_RD_SYNC_BYTE_INC, NULL);
host_int_status = A_SUCCESS(status) ? (host_int_status & (1 << 0)) : 0;
if (host_int_status) {
schedule(); /* schedule for next dsrHandler */
}
} while (host_int_status && --cnt > 0);
if (host_int_status && cnt == 0) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERROR,
("AR6000: %s(), Unable clear up pending IRQ before the system suspended\n",
__FUNCTION__));
}
#if 1
status = A_OK; /* assume that sdio host controller will take care the power of wifi chip */
#else
return -EBUSY; /* Return -EBUSY if customer use all android patch of mmc stack provided by us */
#endif
}
return A_SUCCESS(status) ? 0 : status;
}
开发者ID:ArthySundaram，项目名称:firstrepo，代码行数:47，代码来源:hif.c
示例5: ar6000_hci_send_complete
static void ar6000_hci_send_complete(void *pContext, HTC_PACKET *pPacket)
{
AR6K_HCI_BRIDGE_INFO *pHcidevInfo = (AR6K_HCI_BRIDGE_INFO *)pContext;
void *osbuf = pPacket->pPktContext;
A_ASSERT(osbuf != NULL);
A_ASSERT(pHcidevInfo != NULL);
if (A_FAILED(pPacket->Status)) {
if ((pPacket->Status != A_ECANCELED) && (pPacket->Status != A_NO_RESOURCE)) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("HCI Bridge: Send Packet Failed: %d \n",pPacket->Status));
}
}
FreeHTCStruct(pHcidevInfo,pPacket);
FreeBtOsBuf(pHcidevInfo,osbuf);
}
开发者ID:dalingrin，项目名称:android_system_wlan_atheros，代码行数:17，代码来源:hci_bridge.c
示例6: HTCGetCreditAllocation
A_UINT8 HTCGetCreditAllocation(HTC_TARGET *target, A_UINT16 ServiceID)
{
A_UINT8 allocation = 0;
int i;
for (i = 0; i < HTC_MAX_SERVICE_ALLOC_ENTRIES; i++) {
if (target->ServiceTxAllocTable[i].ServiceID == ServiceID) {
allocation = target->ServiceTxAllocTable[i].CreditAllocation;
}
}
if (0 == allocation) {
AR_DEBUG_PRINTF(ATH_DEBUG_INIT,("HTC Service TX : 0x%2.2X : allocation is zero! \n",ServiceID));
}
return allocation;
}
开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:17，代码来源:htc.c
示例7: ar6000_pm_init
void ar6000_pm_init()
{
#ifdef CONFIG_PM
#ifdef CONFIG_HAS_WAKELOCK
wake_lock_init(&ar6k_suspend_wake_lock, WAKE_LOCK_SUSPEND, "ar6k_suspend");
wake_lock_init(&ar6k_wow_wake_lock, WAKE_LOCK_SUSPEND, "ar6k_wow");
#endif
/*
* Register ar6000_pm_device into system.
* We should also add platform_device into the first item of array
* of devices[] in file arch/xxx/mach-xxx/board-xxxx.c
*/
if (platform_driver_register(&ar6000_pm_device)) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000: fail to register the power control driver.\n"));
}
#endif /* CONFIG_PM */
}
开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:17，代码来源:ar6000_pm.c
示例8: ar6000_power_change_ev
A_STATUS ar6000_power_change_ev(void *context, A_UINT32 config)
{
AR_SOFTC_T *ar = (AR_SOFTC_T *)context;
A_STATUS status = A_OK;
AR_DEBUG_PRINTF(ATH_DEBUG_PM, ("%s: power change event callback %d \n", __func__, config));
switch (config) {
case HIF_DEVICE_POWER_UP:
status = ar6000_exit_cut_power_state(ar);
break;
case HIF_DEVICE_POWER_DOWN:
case HIF_DEVICE_POWER_CUT:
status = A_OK;
break;
}
return status;
}
开发者ID:32743069，项目名称:amlogic_common_3050，代码行数:17，代码来源:ar6000_pm.c
示例9: BMIGetTargetInfo
A_STATUS
BMIGetTargetInfo(HIF_DEVICE *device, struct bmi_target_info *targ_info)
{
if (bmiDone) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI Get Target Info Command disallowed\n"));
return A_ERROR;
}
#ifndef HIF_MESSAGE_BASED
/* getting the target ID requires special handling because of the variable length
* message */
return HIFRegBasedGetTargetInfo(device,targ_info);
#else
/* TODO */
return A_ERROR;
#endif
}
开发者ID:fread-ink，项目名称:fread-kernel-k4，代码行数:17，代码来源:bmi.c
示例10: DevDoEnableDisableRecvOverride
/* disable packet reception (used in case the host runs out of buffers)
* this is the "override" method when the HIF reports another methods to
* disable recv events */
static A_STATUS DevDoEnableDisableRecvOverride(AR6K_DEVICE *pDev, A_BOOL EnableRecv, A_BOOL AsyncMode)
{
A_STATUS status = A_OK;
HTC_PACKET *pIOPacket = NULL;
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
EnableRecv,AsyncMode));
do {
if (AsyncMode) {
pIOPacket = AR6KAllocIOPacket(pDev);
if (NULL == pIOPacket) {
status = A_NO_MEMORY;
A_ASSERT(FALSE);
break;
}
/* stick in our completion routine when the I/O operation completes */
pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
pIOPacket->pContext = pDev;
/* call the HIF layer override and do this asynchronously */
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
pIOPacket);
break;
}
/* if we get here we are doing it synchronously */
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
NULL);
} while (FALSE);
if (A_FAILED(status) && (pIOPacket != NULL)) {
AR6KFreeIOPacket(pDev,pIOPacket);
}
return status;
}
开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:47，代码来源:ar6k.c
示例11: DevDoEnableDisableRecvOverride
/* disable packet reception (used in case the host runs out of buffers)
* this is the "override" method when the HIF reports another methods to
* disable recv events */
static int DevDoEnableDisableRecvOverride(struct ar6k_device *pDev, bool EnableRecv, bool AsyncMode)
{
int status = 0;
struct htc_packet *pIOPacket = NULL;
AR_DEBUG_PRINTF(ATH_DEBUG_TRC,("DevDoEnableDisableRecvOverride: Enable:%d Mode:%d\n",
EnableRecv,AsyncMode));
do {
if (AsyncMode) {
pIOPacket = AR6KAllocIOPacket(pDev);
if (NULL == pIOPacket) {
status = A_NO_MEMORY;
A_ASSERT(false);
break;
}
/* stick in our completion routine when the I/O operation completes */
pIOPacket->Completion = DevDoEnableDisableRecvAsyncHandler;
pIOPacket->pContext = pDev;
/* call the HIF layer override and do this asynchronously */
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
pIOPacket);
break;
}
/* if we get here we are doing it synchronously */
status = pDev->HifMaskUmaskRecvEvent(pDev->HIFDevice,
EnableRecv ? HIF_UNMASK_RECV : HIF_MASK_RECV,
NULL);
} while (false);
if (status && (pIOPacket != NULL)) {
AR6KFreeIOPacket(pDev,pIOPacket);
}
return status;
}
开发者ID:ARMP，项目名称:android_kernel_lge_x3，代码行数:47，代码来源:ar6k.c
示例12: spin_lock_irqsave
BUS_REQUEST *hifAllocateBusRequest(HIF_DEVICE *device)
{
BUS_REQUEST *busrequest;
unsigned long flag;
/* Acquire lock */
spin_lock_irqsave(&device->lock, flag);
/* Remove first in list */
if((busrequest = device->s_busRequestFreeQueue) != NULL)
{
device->s_busRequestFreeQueue = busrequest->next;
}
/* Release lock */
spin_unlock_irqrestore(&device->lock, flag);
AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: hifAllocateBusRequest: 0x%p\n", busrequest));
return busrequest;
}
开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:19，代码来源:hif.c
示例13: hifFreeBusRequest
void
hifFreeBusRequest(HIF_DEVICE *device, BUS_REQUEST *busrequest)
{
unsigned long flag;
AR_DEBUG_ASSERT(busrequest != NULL);
AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: hifFreeBusRequest: 0x%p\n", busrequest));
/* Acquire lock */
spin_lock_irqsave(&device->lock, flag);
/* Insert first in list */
busrequest->next = device->s_busRequestFreeQueue;
busrequest->inusenext = NULL;
device->s_busRequestFreeQueue = busrequest;
/* Release lock */
spin_unlock_irqrestore(&device->lock, flag);
}
开发者ID:AvalueAES，项目名称:rev-sa01，代码行数:19，代码来源:hif.c
示例14: HIFMaskInterrupt
void HIFMaskInterrupt(HIF_DEVICE *device)
{
int ret;
AR_DEBUG_ASSERT(device != NULL);
AR_DEBUG_ASSERT(device->func != NULL);
AR_DEBUG_PRINTF(ATH_DEBUG_TRACE, ("AR6000: HIFMaskInterrupt\n"));
/* Mask our function IRQ */
sdio_claim_host(device->func);
while (atomic_read(&device->irqHandling)) {
sdio_release_host(device->func);
schedule_timeout(HZ/10);
sdio_claim_host(device->func);
}
ret = sdio_release_irq(device->func);
sdio_release_host(device->func);
AR_DEBUG_ASSERT(ret == 0);
}
开发者ID:ArthySundaram，项目名称:firstrepo，代码行数:19，代码来源:hif.c
示例15: DevGMboxRecvLookAheadPeek
A_STATUS DevGMboxRecvLookAheadPeek(AR6K_DEVICE *pDev, A_UINT8 *pLookAheadBuffer, int *pLookAheadBytes)
{
A_STATUS status = A_OK;
AR6K_IRQ_PROC_REGISTERS procRegs;
int maxCopy;
do {
/* on entry the caller provides the length of the lookahead buffer */
if (*pLookAheadBytes > sizeof(procRegs.rx_gmbox_lookahead_alias)) {
A_ASSERT(FALSE);
status = A_EINVAL;
break;
}
maxCopy = *pLookAheadBytes;
*pLookAheadBytes = 0;
/* load the register table from the device */
status = HIFReadWrite(pDev->HIFDevice,
HOST_INT_STATUS_ADDRESS,
(A_UINT8 *)&procRegs,
AR6K_IRQ_PROC_REGS_SIZE,
HIF_RD_SYNC_BYTE_INC,
NULL);
if (A_FAILED(status)) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
("DevGMboxRecvLookAheadPeek : Failed to read register table (%d) \n",status));
break;
}
if (procRegs.gmbox_rx_avail > 0) {
int bytes = procRegs.gmbox_rx_avail > maxCopy ? maxCopy : procRegs.gmbox_rx_avail;
A_MEMCPY(pLookAheadBuffer,&procRegs.rx_gmbox_lookahead_alias[0],bytes);
*pLookAheadBytes = bytes;
}
} while (FALSE);
return status;
}
开发者ID:ArthySundaram，项目名称:firstrepo，代码行数:41，代码来源:ar6k_gmbox.c
示例16: DevGMboxRecvLookAheadPeek
int DevGMboxRecvLookAheadPeek(struct ar6k_device *pDev, u8 *pLookAheadBuffer, int *pLookAheadBytes)
{
int status = 0;
struct ar6k_irq_proc_registers procRegs;
int maxCopy;
do {
/* on entry the caller provides the length of the lookahead buffer */
if (*pLookAheadBytes > sizeof(procRegs.rx_gmbox_lookahead_alias)) {
A_ASSERT(false);
status = A_EINVAL;
break;
}
maxCopy = *pLookAheadBytes;
*pLookAheadBytes = 0;
/* load the register table from the device */
status = HIFReadWrite(pDev->HIFDevice,
HOST_INT_STATUS_ADDRESS,
(u8 *)&procRegs,
AR6K_IRQ_PROC_REGS_SIZE,
HIF_RD_SYNC_BYTE_INC,
NULL);
if (status) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
("DevGMboxRecvLookAheadPeek : Failed to read register table (%d) \n",status));
break;
}
if (procRegs.gmbox_rx_avail > 0) {
int bytes = procRegs.gmbox_rx_avail > maxCopy ? maxCopy : procRegs.gmbox_rx_avail;
memcpy(pLookAheadBuffer,&procRegs.rx_gmbox_lookahead_alias[0],bytes);
*pLookAheadBytes = bytes;
}
} while (false);
return status;
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:41，代码来源:ar6k_gmbox.c
示例17: ath6kl_hifdev_probe
static int ath6kl_hifdev_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
int ret;
struct hif_device *device;
int count;
AR_DEBUG_PRINTF(ATH_DEBUG_TRACE,
("ath6kl: Function: 0x%X, Vendor ID: 0x%X, "
"Device ID: 0x%X, block size: 0x%X/0x%X\n",
func->num, func->vendor, func->device,
func->max_blksize, func->cur_blksize));
ath6kl_alloc_hifdev(func);
device = ath6kl_get_hifdev(func);
device->id = id;
device->is_disabled = true;
spin_lock_init(&device->lock);
spin_lock_init(&device->asynclock);
DL_LIST_INIT(&device->ScatterReqHead);
/* Try to allow scatter unless globally overridden */
if (!nohifscattersupport)
device->scatter_enabled = true;
A_MEMZERO(device->busRequest, sizeof(device->busRequest));
for (count = 0; count < BUS_REQUEST_MAX_NUM; count++) {
sema_init(&device->busRequest[count].sem_req, 0);
hifFreeBusRequest(device, &device->busRequest[count]);
}
sema_init(&device->sem_async, 0);
ret = hifEnableFunc(device, func);
return ret;
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:41，代码来源:hif.c
示例18: CheckBuffers
static A_BOOL CheckBuffers(void)
{
int i;
A_BOOL success = TRUE;
BUFFER_PROC_LIST checkList[BUFFER_PROC_LIST_DEPTH];
/* assemble the list */
AssembleBufferList(checkList);
/* scan the buffers and verify */
for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
success = CheckOneBuffer((A_UINT16 *)checkList[i].pBuffer, checkList[i].length);
if (!success) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
(A_UINT32)checkList[i].pBuffer, checkList[i].length));
break;
}
}
return success;
}
开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:21，代码来源:ar6k.c
示例19: HIFShutDownDevice
void
HIFShutDownDevice(HIF_DEVICE *device)
{
SDIO_STATUS status;
if (device != NULL) {
device->shutdownInProgress = TRUE;
AR_DEBUG_ASSERT(device->handle != NULL);
} else {
/*
* Unregister with bus driver core. This should flush the pending
* requests in the HCD's queues.
*/
AR_DEBUG_PRINTF(ATH_DEBUG_TRC, ("Unregistering with the bus driver\n"));
status = SDIO_UnregisterFunction(&FunctionContext.function);
AR_DEBUG_ASSERT(SDIO_SUCCESS(status));
}
}
开发者ID:EddyKuo，项目名称:linux-sdk-kernel-source，代码行数:21，代码来源:hif.c
示例20: CheckBuffers
static bool CheckBuffers(void)
{
int i;
bool success = true;
struct buffer_proc_list checkList[BUFFER_PROC_LIST_DEPTH];
/* assemble the list */
AssembleBufferList(checkList);
/* scan the buffers and verify */
for (i = 0; i < BUFFER_PROC_LIST_DEPTH ; i++) {
success = CheckOneBuffer((u16 *)checkList[i].pBuffer, checkList[i].length);
if (!success) {
AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Buffer : 0x%X, Length:%d failed verify \n",
(u32)checkList[i].pBuffer, checkList[i].length));
break;
}
}
return success;
}
开发者ID:ARMP，项目名称:android_kernel_lge_x3，代码行数:21，代码来源:ar6k.c
注：本文中的AR_DEBUG_PRINTF函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论