• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ ARRAYSIZE函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中ARRAYSIZE函数的典型用法代码示例。如果您正苦于以下问题:C++ ARRAYSIZE函数的具体用法?C++ ARRAYSIZE怎么用?C++ ARRAYSIZE使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ARRAYSIZE函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GetClientRect

// Create a DX11 context
//-----------------------------------------------------------------------------
CPUTResult CPUT_DX11::CreateDXContext(CPUTContextCreation ContextParams )
{

    HRESULT hr = S_OK;
    CPUTResult result = CPUT_SUCCESS;

    // window params
    RECT rc;
    HWND hWnd = mpWindow->GetHWnd();
    GetClientRect( hWnd, &rc );
    UINT width = rc.right - rc.left;
    UINT height = rc.bottom - rc.top;

    // set up DirectX creation parameters
    mdriverType = D3D_DRIVER_TYPE_NULL;
    mfeatureLevel = D3D_FEATURE_LEVEL_11_0;
    mpD3dDevice = NULL;
    mpContext = NULL;
    mpSwapChain = NULL;
    mSwapChainBufferCount = ContextParams.swapChainBufferCount;
    mpBackBufferRTV = NULL;
    UINT createDeviceFlags = 0;
#ifdef _DEBUG
    createDeviceFlags |= D3D11_CREATE_DEVICE_DEBUG;
#endif

    D3D_DRIVER_TYPE driverTypes[] =
    {
        D3D_DRIVER_TYPE_HARDWARE,
        D3D_DRIVER_TYPE_WARP,
        D3D_DRIVER_TYPE_REFERENCE,
    };
    UINT numDriverTypes = ARRAYSIZE( driverTypes );

    // SRV's (shader resource views) require Structured Buffer
    // usage (D3D11_RESOURCE_MISC_BUFFER_STRUCTURED) which was 
    // introduced in shader model 5 (directx 11.0)
    //
    D3D_FEATURE_LEVEL featureLevels[] =
    {
        D3D_FEATURE_LEVEL_11_0,
        D3D_FEATURE_LEVEL_10_1,
        D3D_FEATURE_LEVEL_10_0
    };
    UINT numFeatureLevels = ARRAYSIZE( featureLevels );

    // swap chain information
    DXGI_SWAP_CHAIN_DESC sd;
    ZeroMemory( &sd, sizeof( sd ) );
    sd.BufferCount = mSwapChainBufferCount;
    sd.BufferDesc.Width = width;
    sd.BufferDesc.Height = height;

    mSwapChainFormat = ContextParams.swapChainFormat;
    sd.BufferDesc.Format = ContextParams.swapChainFormat;
    sd.BufferDesc.RefreshRate.Numerator = ContextParams.refreshRate;
    sd.BufferDesc.RefreshRate.Denominator = 1;
    sd.BufferUsage = ContextParams.swapChainUsage;
    sd.OutputWindow = hWnd;
    sd.SampleDesc.Count = 1;  // Number of MSAA samples
    sd.SampleDesc.Quality = 0;
    sd.Windowed = TRUE;
    sd.Flags = DXGI_SWAP_CHAIN_FLAG_ALLOW_MODE_SWITCH;

    // set the vsync parameter
    if(0 != ContextParams.refreshRate)
    {
        mSyncInterval = 1;
    }

    // walk devices and create device and swap chain on best matching piece of hardware
    bool functionalityTestPassed = false;
    for( UINT driverTypeIndex = 0; driverTypeIndex < numDriverTypes; driverTypeIndex++ )
    {
        mdriverType = driverTypes[driverTypeIndex];
        hr = D3D11CreateDeviceAndSwapChain(
            NULL,
            mdriverType,
            NULL,
            createDeviceFlags,
            featureLevels,
            numFeatureLevels,
            D3D11_SDK_VERSION,
            &sd,
            &mpSwapChain,
            &mpD3dDevice,
            &mfeatureLevel,
            &mpContext
        );
        if( SUCCEEDED( hr ) )
        {
            functionalityTestPassed = TestContextForRequiredFeatures();
            if(true == functionalityTestPassed)
            {
                break;
            }
            else
            {
//.........这里部分代码省略.........
开发者ID:GameTechDev,项目名称:Windows-Desktop-Sensors,代码行数:101,代码来源:CPUT_DX11.cpp


示例2: sizeof

BOOL UpdateValidationX509::ValidateUpdate( MFUpdate* pUpdate, UINT8* pValidation, INT32 validationLen )
{
    CK_MECHANISM_TYPE mechs[] = { CKM_RSA_PKCS };
    CK_SLOT_ID slotID;
    CK_SESSION_HANDLE session;
    CK_OBJECT_CLASS ckoCert = CKO_CERTIFICATE;
    CK_OBJECT_HANDLE hCACert;
    CK_MECHANISM_TYPE sha1Mech = CKM_SHA_1;
    CK_MECHANISM mech = { CKM_RSA_PKCS, &sha1Mech, sizeof(sha1Mech) };
    BOOL retVal = FALSE;
    UINT8* caCert;
    UINT32 certLen = 0;

    if(g_DebuggerPortSslConfig.GetCertificateAuthority == NULL)
    {
        return FALSE;
    }
    
    g_DebuggerPortSslConfig.GetCertificateAuthority( &caCert, &certLen );

    CK_ATTRIBUTE attribs[] =
    {
        { CKA_CLASS   , &ckoCert, sizeof(ckoCert) },
        { CKA_VALUE   , caCert  , certLen         }
    };

    if(pUpdate->Providers->Storage == NULL) return FALSE;
    if(certLen == 0 || caCert == NULL     ) return FALSE;
    if(pValidation == NULL                ) return FALSE;

    C_Initialize(NULL);

    slotID = Cryptoki_FindSlot(NULL, mechs, ARRAYSIZE(mechs));  if(CK_SLOT_ID_INVALID == slotID) return FALSE;
    
    if(CKR_OK == C_OpenSession(slotID, CKF_SERIAL_SESSION, NULL, NULL, &session) && (CK_SESSION_HANDLE_INVALID != session))
    {
        if(CKR_OK == C_CreateObject(session, attribs, ARRAYSIZE(attribs), &hCACert) && hCACert != CK_OBJECT_HANDLE_INVALID)
        {
            if(CKR_OK == C_VerifyInit(session, &mech, hCACert)) 
            {
                UINT8 buff[512];
                INT32 len = sizeof(buff);
                INT32 updateSize = pUpdate->Header.UpdateSize;
                INT32 offset = 0;

                while(offset < updateSize)
                {
                    if((offset + len) > updateSize)
                    {
                        len = updateSize - offset;
                    }
                    
                    if(!pUpdate->Providers->Storage->Read(pUpdate->StorageHandle, offset, buff, len)) break;

                    C_VerifyUpdate(session, buff, len);

                    offset += len;
                }
                retVal = CKR_OK == C_VerifyFinal(session, pValidation, (CK_ULONG)validationLen);
            }

            C_DestroyObject(session, hCACert);
        }
        
        C_CloseSession(session);
    }

    return retVal;    
}
开发者ID:EddieGarmon,项目名称:netduino-netmf,代码行数:69,代码来源:X509UpdateValidation.cpp


示例3: freeSceneShapes

void KyraEngine_MR::freeSceneShapes() {
	for (uint i = 0; i < ARRAYSIZE(_sceneShapes); ++i) {
		delete[] _sceneShapes[i];
		_sceneShapes[i] = 0;
	}
}
开发者ID:AdamRi,项目名称:scummvm-pink,代码行数:6,代码来源:scene_mr.cpp


示例4: key_path

RemoteDesktop::EventLog::EventLog(std::wstring name){
	Name = name;
	auto key_path(L"SYSTEM\\CurrentControlSet\\Services\\EventLog\\Application\\" + name);

	HKEY key;

	DWORD last_error = RegCreateKeyEx(HKEY_LOCAL_MACHINE,
		key_path.c_str(),
		0,
		0,
		REG_OPTION_NON_VOLATILE,
		KEY_SET_VALUE,
		0,
		&key,
		0);
	if (ERROR_SUCCESS == last_error)
	{
		wchar_t szPath[MAX_PATH];
		bool ret = false;

		GetModuleFileName(NULL, szPath, ARRAYSIZE(szPath));

		const DWORD types_supported = EVENTLOG_ERROR_TYPE |
			EVENTLOG_WARNING_TYPE |
			EVENTLOG_INFORMATION_TYPE;

		RegSetValueEx(key,
			L"EventMessageFile",
			0,
			REG_SZ,
			(BYTE*)szPath,
			wcsnlen_s(szPath, MAX_PATH) * 2);

		RegSetValueEx(key,
			L"CategoryMessageFile",
			0,
			REG_SZ,
			(BYTE*)szPath,
			wcsnlen_s(szPath, MAX_PATH) * 2);

		RegSetValueEx(key,
			L"ParameterMessageFile",
			0,
			REG_SZ,
			(BYTE*)szPath,
			wcsnlen_s(szPath, MAX_PATH) * 2);

		RegSetValueEx(key,
			L"TypesSupported",
			0,
			REG_DWORD,
			(LPBYTE)&types_supported,
			sizeof(types_supported));
		DWORD catcount = 3;
		RegSetValueEx(key,
			L"CategoryCount",
			0,
			REG_DWORD,
			(LPBYTE)&catcount,
			sizeof(catcount));
		RegCloseKey(key);
	}
	else
	{
		std::cerr << "Failed to install source: " << last_error << "\n";
	}

	_EventSource = RegisterEventSource(NULL, name.c_str());
}
开发者ID:gvsurenderreddy,项目名称:RemoteDesktop-1,代码行数:69,代码来源:EventLog.cpp


示例5: DoWrap

void DoWrap(BOOL abWordWrap, EditorInfo &ei, int iMaxWidth)
{
	INT_PTR iRc = 0;
	INT_PTR cchMax = 0;
	TCHAR* pszCopy = NULL;
	TCHAR szEOL[4];
	INT_PTR iFrom, iTo, iEnd, iFind;
	bool bWasModifed = (ei.CurState & ECSTATE_MODIFIED) && !(ei.CurState & ECSTATE_SAVED);

	gbLastWrap = TRUE;
	
	for (INT_PTR i = 0; i < ei.TotalLines; i++)
	{
		//bool lbCurLine = (i == ei.CurLine);
		
		EditorGetString egs = {FARSTRUCTSIZE(egs)};
		egs.StringNumber = i;
		iRc = EditCtrl(ECTL_GETSTRING, &egs);
		if (!iRc)
		{
			_ASSERTE(iRc!=0);
			goto wrap;
		}
		_ASSERTE(egs.StringText!=NULL);
		
		if ((egs.StringLength <= iMaxWidth)
			&& ((egs.StringLength <= 0) || !(egs.StringText && wcschr(egs.StringText, L'\t'))))
		{
			// Эту строку резать не нужно
			continue;
		}
		
		lstrcpyn(szEOL, egs.StringEOL?egs.StringEOL:_T(""), ARRAYSIZE(szEOL));
		
		if (egs.StringLength >= cchMax || !pszCopy)
		{
			if (pszCopy)
				free(pszCopy);
			cchMax = egs.StringLength + 255;
			pszCopy = (TCHAR*)malloc(cchMax*sizeof(*pszCopy));
			if (!pszCopy)
			{
				_ASSERTE(pszCopy!=NULL);
				goto wrap;
			}
		}
		// Делаем копию, над которой можем издеваться
		memmove(pszCopy, egs.StringText, egs.StringLength*sizeof(*pszCopy));
		pszCopy[egs.StringLength] = 0; // на всякий случай, хотя вроде должен быть ASCIIZ
		
		bool lbFirst = 0;
		iFrom = 0; iEnd = egs.StringLength;
		while (iFrom < iEnd)
		{
			//iTo = min(iEnd,(iFrom+iMaxWidth));
			iTo = FindExceed(pszCopy, i, iFrom, min(iEnd/*+1*/,(iFrom+iMaxWidth)), iMaxWidth, ei.TabSize);
			iFind = iTo;
			if (iFind >= iEnd)
			{
				iFind = iTo = iEnd;
			}
			else if (abWordWrap
				/*&& (((egs.StringLength - iFrom) > iMaxWidth) || IsExceed(pszCopy, i, iFrom, iFind, iMaxWidth, ei.TabSize))*/
				)
			{
				while (iFind > iFrom)
				{
					if (IsSpaceOrNull(pszCopy[iFind-1]))
						break;
					//{
					//	// Если есть табы - нужно учитывать их ширину
					//	//TODO: Optimize, по хорошему, если есть табы, нужно оптимизировать расчет экранной позиции
					//	bool bExceed = IsExceed(pszCopy, i, iFrom, iFind, iMaxWidth, ei.TabSize);

					//	if (!bExceed)
					//		break;
					//}
					iFind--;
				}
				// Если по пробелам порезать не удалось, попробуем по другим знакам?
				if (iFind == iFrom)
				{
					iFind = iTo;
					while (iFind > iFrom)
					{
						if (_tcschr(gsPuctuators, pszCopy[iFind]) && !_tcschr(gsWordDiv, pszCopy[iFind-1]))
							break;
						//{
						//	// Если есть табы - нужно учитывать их ширину
						//	//TODO: Optimize, по хорошему, если есть табы, нужно оптимизировать расчет экранной позиции
						//	bool bExceed = IsExceed(pszCopy, i, iFrom, iFind, iMaxWidth, ei.TabSize);

						//	if (!bExceed)
						//		break;
						//}
						iFind--;
					}
					if (iFind == iFrom)
					{
						iFind = iTo;
//.........这里部分代码省略.........
开发者ID:Maximus5,项目名称:FarPlugins,代码行数:101,代码来源:EditWrap.cpp


示例6: ARRAYSIZE

static struct Rotation3AnimData r3ad_104E1AA8[] =
{
    { 0, { 0, 3345, -5139 } },
    { 15, { 0, 3345, -5139 } }
};

static struct Rotation3AnimData r3ad_104E1AC8[] =
{
    { 0, { 0, -3159, -5149 } },
    { 15, { 0, -3159, -5149 } }
};

static struct AnimFrame_PosRot afpr_104E1AE8[] =
{
    { v3ad_104E0684, NULL, ARRAYSIZE(v3ad_104E0684), 0 },
    { NULL, r3ad_104E06A8, 0, ARRAYSIZE(r3ad_104E06A8) },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, r3ad_104E07A8, 0, ARRAYSIZE(r3ad_104E07A8) },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, r3ad_104E08A8, 0, ARRAYSIZE(r3ad_104E08A8) },
    { NULL, r3ad_104E09A8, 0, ARRAYSIZE(r3ad_104E09A8) },
    { NULL, r3ad_104E0AA8, 0, ARRAYSIZE(r3ad_104E0AA8) },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
开发者ID:sonicretro,项目名称:sadx_decomp,代码行数:30,代码来源:ah2_104E1F28.c


示例7: wcePutFile

bool wcePutFile(const char *host_file, const char *wce_file)
{
	TCHAR tszSrcFile[MAX_PATH];
	WCHAR wszDestFile[MAX_PATH];
	BYTE  buffer[5120];
    WIN32_FIND_DATA wfd;
	HRESULT hr;
	DWORD dwAttr, dwNumRead, dwNumWritten;
	HANDLE hSrc, hDest, hFind;
	int nResult;

#ifdef UNICODE
	nResult = MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED,
									host_file, strlen(host_file)+1,
									tszSrcFile, ARRAYSIZE(tszSrcFile));
	if(0 == nResult)
		return false;
#else
	hr = StringCchCopy(tszSrcFile, ARRAYSIZE(tszSrcFile), argv[1]);
	if(FAILED(hr))
		return false;
#endif
	nResult = MultiByteToWideChar(CP_ACP, MB_PRECOMPOSED,
									wce_file, strlen(wce_file)+1,
									wszDestFile, ARRAYSIZE(wszDestFile));
    if(0 == nResult)
        return false;

    hFind = FindFirstFile( tszSrcFile, &wfd);
    if (INVALID_HANDLE_VALUE == hFind) {
        _tprintf(TEXT("Host file does not exist\n"));
        return false;
    }
    FindClose( hFind);
	if (wfd.dwFileAttributes & FILE_ATTRIBUTE_DIRECTORY) {
        _tprintf( TEXT("Host file specifies a directory\n"));
        return false;
    }
	
	if (wceConnect()) {
		dwAttr = CeGetFileAttributes( wszDestFile);
		if (dwAttr & FILE_ATTRIBUTE_DIRECTORY) {
            hr = StringCchCatW(wszDestFile, ARRAYSIZE(wszDestFile), L"\\");
            if(FAILED(hr)) return false;
#ifdef UNICODE
            hr = StringCchCatW(wszDestFile, ARRAYSIZE(wszDestFile), wfd.cFileName);
            if(FAILED(hr)) return false;
#else
            nResult = MultiByteToWideChar(
                        CP_ACP,    
                        MB_PRECOMPOSED,
                        wfd.cFileName,
                        strlen(wfd.cFileName)+1,
                        wszDestFile+wcslen(wszDestFile),
                        ARRAYSIZE(wszDestFile)-wcslen(wszDestFile));
            if(0 == nResult)
            {
                return 1;
            }
#endif
		}
		hSrc = CreateFile(tszSrcFile, GENERIC_READ, FILE_SHARE_READ, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
		if (INVALID_HANDLE_VALUE == hSrc) {
			_tprintf( TEXT("Unable to open host file\n"));
			return false;
		}

		hDest = CeCreateFile(wszDestFile, GENERIC_WRITE, FILE_SHARE_READ, NULL, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, NULL);
		if (INVALID_HANDLE_VALUE == hDest ) {
			_tprintf( TEXT("Unable to open target WinCE file\n"));
			return false;
		}

		//copy file
		do {
			if(ReadFile(hSrc, &buffer, sizeof(buffer), &dwNumRead, NULL)) {
				if (!CeWriteFile(hDest, &buffer, dwNumRead, &dwNumWritten, NULL)) {
					_tprintf( TEXT("Error !!! Writing WinCE file\n"));
					goto FatalError;
				}
			} else {
				_tprintf( TEXT("Error !!! Reading host file\n"));
				goto FatalError;
			}
			_tprintf( TEXT("."));                                        
		} while (dwNumRead);
		//_tprintf( TEXT("\n"));

		CeCloseHandle( hDest);
		CloseHandle (hSrc);
	}
	wceDisconnect();
	return true;

FatalError:
	CeCloseHandle( hDest);
	CloseHandle (hSrc);
	wceDisconnect();
	return false;
}
开发者ID:sanyaade-mobiledev,项目名称:rhodes,代码行数:100,代码来源:detool.cpp


示例8: wf_post_connect

BOOL wf_post_connect(freerdp* instance)
{
	rdpGdi* gdi;
	DWORD dwStyle;
	rdpCache* cache;
	wfContext* wfc;
	rdpContext* context;
	WCHAR lpWindowName[64];
	rdpSettings* settings;
	EmbedWindowEventArgs e;

	settings = instance->settings;
	context = instance->context;
	wfc = (wfContext*) instance->context;
	cache = instance->context->cache;

	wfc->dstBpp = 32;
	wfc->width = settings->DesktopWidth;
	wfc->height = settings->DesktopHeight;

	if (wfc->sw_gdi)
	{
		gdi_init(instance, CLRCONV_ALPHA | CLRCONV_INVERT | CLRBUF_32BPP, NULL);
		gdi = instance->context->gdi;
		wfc->hdc = gdi->primary->hdc;
		wfc->primary = wf_image_new(wfc, wfc->width, wfc->height, wfc->dstBpp, gdi->primary_buffer);
	}
	else
	{
		wf_gdi_register_update_callbacks(instance->update);
		wfc->srcBpp = instance->settings->ColorDepth;
		wfc->primary = wf_image_new(wfc, wfc->width, wfc->height, wfc->dstBpp, NULL);

		wfc->hdc = gdi_GetDC();
		wfc->hdc->bitsPerPixel = wfc->dstBpp;
		wfc->hdc->bytesPerPixel = wfc->dstBpp / 8;

		wfc->hdc->alpha = wfc->clrconv->alpha;
		wfc->hdc->invert = wfc->clrconv->invert;

		wfc->hdc->hwnd = (HGDI_WND) malloc(sizeof(GDI_WND));
		wfc->hdc->hwnd->invalid = gdi_CreateRectRgn(0, 0, 0, 0);
		wfc->hdc->hwnd->invalid->null = 1;

		wfc->hdc->hwnd->count = 32;
		wfc->hdc->hwnd->cinvalid = (HGDI_RGN) malloc(sizeof(GDI_RGN) * wfc->hdc->hwnd->count);
		wfc->hdc->hwnd->ninvalid = 0;

		if (settings->RemoteFxCodec)
		{
			wfc->tile = wf_image_new(wfc, 64, 64, 32, NULL);
			wfc->rfx_context = rfx_context_new(FALSE);
		}

		if (settings->NSCodec)
		{
			wfc->nsc_context = nsc_context_new();
		}
	}

	if (settings->WindowTitle != NULL)
		_snwprintf(lpWindowName, ARRAYSIZE(lpWindowName), L"%S", settings->WindowTitle);
	else if (settings->ServerPort == 3389)
		_snwprintf(lpWindowName, ARRAYSIZE(lpWindowName), L"FreeRDP: %S", settings->ServerHostname);
	else
		_snwprintf(lpWindowName, ARRAYSIZE(lpWindowName), L"FreeRDP: %S:%d", settings->ServerHostname, settings->ServerPort);

	if (settings->EmbeddedWindow)
		settings->Decorations = FALSE;
	
	if (!settings->Decorations)
		dwStyle = WS_CHILD | WS_BORDER;
	else
		dwStyle = 0;

	if (!wfc->hwnd)
	{
		wfc->hwnd = CreateWindowEx((DWORD) NULL, wfc->wndClassName, lpWindowName, dwStyle,
			0, 0, 0, 0, wfc->hWndParent, NULL, wfc->hInstance, NULL);

		SetWindowLongPtr(wfc->hwnd, GWLP_USERDATA, (LONG_PTR) wfc);	   
	}

	wf_resize_window(wfc);

	wf_add_system_menu(wfc);

	BitBlt(wfc->primary->hdc, 0, 0, wfc->width, wfc->height, NULL, 0, 0, BLACKNESS);
	wfc->drawing = wfc->primary;

	EventArgsInit(&e, "wfreerdp");
	e.embed = FALSE;
	e.handle = (void*) wfc->hwnd;
	PubSub_OnEmbedWindow(context->pubSub, context, &e);		   
	
	ShowWindow(wfc->hwnd, SW_SHOWNORMAL);
	UpdateWindow(wfc->hwnd);

	if (wfc->sw_gdi)
	{											
//.........这里部分代码省略.........
开发者ID:AhmadKabakibi,项目名称:FreeRDP,代码行数:101,代码来源:wf_interface.c


示例9: ARRAYSIZE

    { -0.002852f, 0.988813f, 0.149136f },
    { 0.015325f, 0.108138f, -0.994018f }
};

static short unsigned int strips_10681990[] =
{
    10,
    7, 1, 3, 0, 2, 4, 6, 5, 7, 1
};

static struct MESH mesh_106819A8[] =
{
    { 0 | MeshPolyType_StripsB, 1, strips_10681990, 0, NULL, NULL, NULL, 0 }
};

extern struct MATERIAL mat_106804E8[1];

struct ATTACH attach_10681A88 =
{
    vec3_106819C8,
    vec3_10681A28,
    ARRAYSIZE(vec3_106819C8),
    mesh_106819A8,
    mat_106804E8,
    ARRAYSIZE(mesh_106819A8),
    ARRAYSIZE(mat_106804E8),
    { 0.470043f, 0.006634f, -0.017387f },
    0.829958f,
    0
};
开发者ID:sonicretro,项目名称:sadx_decomp,代码行数:30,代码来源:attach_10681A88.c


示例10: ExtendFileSystem

int ExtendFileSystem (HWND hwndDlg , wchar_t *lpszVolume, Password *pVolumePassword, int VolumePkcs5, int VolumePim, uint64 newDataAreaSize)
{
    wchar_t szVolumeGUID[128];
    int driveNo = -1;
    wchar_t rootPath[] = L"A:\\";
    enum EV_FileSystem fs;
    DWORD dwError;
    int nStatus = ERR_SUCCESS;
    DWORD BytesPerSector;

    // mount and resize file system

    DebugAddProgressDlgStatus (hwndDlg, "Mounting volume ...\r\n");

    nStatus=MountVolTemp(hwndDlg, lpszVolume, &driveNo, pVolumePassword, VolumePkcs5, VolumePim);
    if (nStatus!=ERR_SUCCESS)
    {
        driveNo = -1;
        goto error;
    }

    rootPath[0] += driveNo;

    if ( !GetFileSystemType(rootPath,&fs) )
    {
        dwError = GetLastError();
        if (dwError == ERROR_UNRECOGNIZED_VOLUME)
        {
            // raw volume with unrecognized file system -> return with no error
            nStatus = ERR_SUCCESS;
            goto error;
        }
        nStatus = ERR_OS_ERROR;
        goto error;
    }

    if (fs != EV_FS_TYPE_RAW && fs != EV_FS_TYPE_NTFS )
    {
        // FsctlExtendVolume only supports NTFS and RAW -> return with no error
        nStatus = ERR_SUCCESS;
        goto error;
    }

    // Get volume GUID
    if (!GetVolumeNameForVolumeMountPoint(rootPath,szVolumeGUID,ARRAYSIZE(szVolumeGUID)))
    {
        nStatus = ERR_OS_ERROR;
        goto error;
    }
    else
    {
        // strip trailing backslash from volume GUID (otherwise it means root dir)
        size_t len = wcslen(szVolumeGUID);
        if (len>0) --len;
        if (szVolumeGUID[len]==L'\\') szVolumeGUID[len]=0;
    }

    // Get Sector Size
    if ( !GetNtfsNumberOfSectors(rootPath, NULL, &BytesPerSector) )
    {
        nStatus = ERR_OS_ERROR;
        goto error;
    }

    DebugAddProgressDlgStatus (hwndDlg, "Extending file system ...\r\n");

    // extend volume
    nStatus = FsctlExtendVolume(szVolumeGUID, newDataAreaSize/BytesPerSector );

error:

    dwError = GetLastError();

    if (driveNo>=0)
    {
        DebugAddProgressDlgStatus (hwndDlg, "Unmounting volume ...\r\n");
        UnmountVolume (hwndDlg, driveNo, TRUE);
    }

    SetLastError (dwError);

    return nStatus;
}
开发者ID:goofwear,项目名称:VeraCrypt,代码行数:83,代码来源:ExpandVolume.c


示例11: PowerOpsStateChange

static gboolean
PowerOpsStateChange(RpcInData *data)
{
   size_t i;
   PowerOpState *state = data->clientData;

   if (state->pid != INVALID_PID) {
      g_debug("State change already in progress.\n");
      return RPCIN_SETRETVALS(data,  "State change already in progress", FALSE);
   }

   g_debug("State change: %s\n", data->name);

   for (i = 0; i < ARRAYSIZE(stateChangeCmdTable); i++) {
      if (strcmp(data->name, stateChangeCmdTable[i].tcloCmd) == 0) {
         gchar *script;
         const char *result;
         const char *confName;
         Bool ret;

         state->stateChgInProgress = stateChangeCmdTable[i].id;

         /* Check for the toolScripts option. */
         if (!state->scriptEnabled[stateChangeCmdTable[i].id]) {
            PowerOpsStateChangeDone(state, TRUE);
            g_debug("Script for %s not configured to run\n",
                    stateChangeCmdTable[i].tcloCmd);
            return RPCIN_SETRETVALS(data, "", TRUE);
         }

         confName = stateChgConfNames[stateChangeCmdTable[i].id];
         script = g_key_file_get_string(state->ctx->config,
                                        "powerops",
                                        confName,
                                        NULL);

         if (script == NULL) {
            /* Use default script if not set in config file. */
            const char *dfltScript = GuestApp_GetDefaultScript(confName);
            if (dfltScript == NULL) {
               g_debug("No default script to run for state change %s.\n",
                       stateChangeCmdTable[i].name);
               PowerOpsStateChangeDone(state, TRUE);
               return RPCIN_SETRETVALS(data, "", TRUE);
            }
            script = g_strdup(dfltScript);
         } else if (strlen(script) == 0) {
            g_debug("No script to run for state change %s.\n",
                    stateChangeCmdTable[i].name);
            g_free(script);
            PowerOpsStateChangeDone(state, TRUE);
            return RPCIN_SETRETVALS(data, "", TRUE);
         }

         /* If script path is not absolute, assume the Tools install path. */
         if (!g_path_is_absolute(script)) {
            char *dfltPath;
            char *tmp;

            dfltPath = GuestApp_GetInstallPath();
            ASSERT(dfltPath != NULL);

            /*
             * Before the switch to vmtoolsd, the config file was saved with
             * quotes around the script path to make the old VMware dict code
             * happy. Now we need to undo that when modifying the script path.
             *
             * PowerOpsRunScript will "re-quote" the script path.
             */
            if (script[0] == '"') {
                script[strlen(script) - 1] = '\0';
                tmp = g_strdup_printf("%s%c%s", dfltPath, DIRSEPC, script + 1);
            } else {
               tmp = g_strdup_printf("%s%c%s", dfltPath, DIRSEPC, script);
            }

            g_free(script);
            vm_free(dfltPath);
            script = tmp;
         }

         if (PowerOpsRunScript(state, script)) {
            result = "";
            ret = TRUE;
         } else {
            PowerOpsStateChangeDone(state, FALSE);
            result = "Error starting script";
            ret = FALSE;
         }

         g_free(script);
         return RPCIN_SETRETVALS(data, (char *) result, ret);
      }
   }

   g_warning("Invalid state change command.\n");
   return RPCIN_SETRETVALS(data, "Invalid state change command", FALSE);
}
开发者ID:AlissonGiron,项目名称:open-vm-tools,代码行数:98,代码来源:powerOps.c


示例12: memcpy

void FTP::AddToQueque(FAR_FIND_DATA* FileName, LPCSTR Path, BOOL Download)
{
	String  str;
	char   *m;
	int     num;
	FTPUrl* p = new FTPUrl;
	memcpy(&p->Host, &Host, sizeof(Host));
	p->Download = Download;
	p->Next     = NULL;
	p->FileName = *FileName;
	p->Error.Null();
	p->DestPath = Path;

	if(Download)
		m = strrchr(FileName->cFileName, '/');
	else
		m = strrchr(FileName->cFileName, '\\');

	if(m)
	{
		*m = 0;
		p->DestPath.Add(m);
		memmove(FileName->cFileName, m+1, m-FileName->cFileName);
	}

	if(Download)
	{
		GetCurPath(p->SrcPath);
		AddEndSlash(p->SrcPath, '/');
		str.printf("%s%s", p->SrcPath.c_str(), FileName->cFileName);
		FixLocalSlash(p->DestPath);
		AddEndSlash(p->DestPath, '\\');
		num = str.Chr('/');
	}
	else
	{
		PanelInfo pi;
		FP_Info->Control(this, FCTL_GETANOTHERPANELINFO, &pi);
		p->SrcPath = pi.CurDir;
		AddEndSlash(p->SrcPath, '\\');
		str.printf("%s%s", p->SrcPath.c_str(), FileName->cFileName);
		FixLocalSlash(str);
		AddEndSlash(p->DestPath, '/');
		num = str.Chr('\\');
	}

	if(num != -1)
	{
		StrCpy(p->FileName.cFileName, str.c_str()+num+1, ARRAYSIZE(p->FileName.cFileName));
		str.SetLength(num);
		p->SrcPath = str;
	}
	else
	{
		StrCpy(p->FileName.cFileName, str.c_str(), ARRAYSIZE(p->FileName.cFileName));
		p->SrcPath.Null();
	}

	if(!UrlsList) UrlsList = p;

	if(UrlsTail)  UrlsTail->Next = p;

	UrlsTail = p;
	QuequeSize++;
}
开发者ID:CyberShadow,项目名称:FAR,代码行数:65,代码来源:Queque.cpp


示例13: SetupQOpt

void FTP::QuequeMenu(void)
{
	int              n,
	  num;
	int              Breaks[] = { VK_DELETE, VK_INSERT, VK_F4, VK_RETURN, 0 },
	                            BNumber;
	FarMenuItem     *mi = NULL;
	FTPUrl*          p,*p1;
	char             str1[MAX_PATH],
	   str2[MAX_PATH],
	   str3[MAX_PATH];
	QueueExecOptions exOp;
	SetupQOpt(&exOp);
	num = -1;

	do
	{
		mi = (FarMenuItem *)realloc(mi, (QuequeSize+1)*sizeof(FarMenuItem));
		memset(mi, 0, QuequeSize*sizeof(FarMenuItem));

		for(p = UrlsList,n = 0; p; p = p->Next, n++)
		{
			StrCpy(str1, p->SrcPath.c_str(),    20);
			StrCpy(str2, p->DestPath.c_str(),   20);
			StrCpy(str3, p->FileName.cFileName, 20);
			_snprintf(mi[n].Text, ARRAYSIZE(mi[n].Text),
			          "%c%c %-20s%c%-20s%c%-20s",
			          p->Download ? '-' : '<', p->Download ? '>' : '-',
			          str1, FAR_VERT_CHAR,
			          str2, FAR_VERT_CHAR,
			          str3);

			if(p->Error[0])
				mi[n].Checked = TRUE;
		}

		//Title
		char title[MAX_PATH];
		_snprintf(title, ARRAYSIZE(title), "%s: %d %s", FP_GetMsg(MQMenuTitle), n, FP_GetMsg(MQMenuItems));

		//Menu
		if(num != -1 && num < QuequeSize) mi[num].Selected = TRUE;

		n = FP_Info->Menu(FP_Info->ModuleNumber,-1,-1,0,FMENU_SHOWAMPERSAND,
		                  title,
		                  FP_GetMsg(MQMenuFooter),
		                  "FTPQueue", Breaks, &BNumber, mi, QuequeSize);

		//key ESC
		if(BNumber == -1 &&
		        n == -1)
			goto Done;

		//key Enter
		if(BNumber == -1)
		{
			//??
			goto Done;
		}

		//Set selected
		if(num != -1) mi[num].Selected = FALSE;

		num = n;

		//Process keys
		switch(BNumber)
		{
				/*DEL*/
			case 0:

				if(QuequeSize)
					switch(AskDeleteQueue())
					{
						case -1:
						case  2:
							break;
						case  0:
							p = UrlItem(n, &p1);
							DeleteUrlItem(p, p1);
							break;
						case  1:
							ClearQueue();
							break;
					}

				break;
				/*Ins*/
			case 1:
				InsertToQueue();
				break;
				/*F4*/
			case 2:
				p = UrlItem(n, NULL);

				if(p)
					EditUrlItem(p);

				break;
				/*Return*/
//.........这里部分代码省略.........
开发者ID:CyberShadow,项目名称:FAR,代码行数:101,代码来源:Queque.cpp


示例14: ProgressSetStep

VOID
ProgressSetStep(
    IN PPROGRESSBAR Bar,
    IN ULONG Step)
{
    COORD coPos;
    DWORD Written;
    ULONG NewPos;
    CHAR TextBuffer[256];

    if (Step > Bar->StepCount)
        return;

    Bar->CurrentStep = Step;

    /* Update the progress and redraw it if it has changed */
    if (Bar->UpdateProgressProc &&
        Bar->UpdateProgressProc(Bar, FALSE, TextBuffer, ARRAYSIZE(TextBuffer)))
    {
        coPos.X = Bar->Left + (Bar->Width - strlen(TextBuffer) + 1) / 2;
        coPos.Y = Bar->Top;
        WriteConsoleOutputCharacterA(StdOutput,
                                     TextBuffer,
                                     strlen(TextBuffer),
                                     coPos,
                                     &Written);
    }

    /* Calculate the bar position */
    NewPos = (((Bar->Width - 2) * 2 * Bar->CurrentStep + (Bar->StepCount / 2)) / Bar->StepCount);

    /* Redraw the bar if it has changed */
    if (Bar->Pos != NewPos)
    {
        Bar->Pos = NewPos;

        for (coPos.Y = Bar->Top + 2; coPos.Y <= Bar->Bottom - 1; coPos.Y++)
        {
            coPos.X = Bar->Left + 1;
            FillConsoleOutputCharacterA(StdOutput,
                                        0xDB,
                                        Bar->Pos / 2,
                                        coPos,
                                        &Written);
            coPos.X += Bar->Pos / 2;

            if (NewPos & 1)
            {
                FillConsoleOutputCharacterA(StdOutput,
                                            0xDD,
                                            1,
                                            coPos,
                                            &Written);
                coPos.X++;
            }

            if (coPos.X <= Bar->Right - 1)
            {
                FillConsoleOutputCharacterA(StdOutput,
                                            ' ',
                                            Bar->Right - coPos.X,
                                            coPos,
                                            &Written);
            }
        }
    }
}
开发者ID:Moteesh,项目名称:reactos,代码行数:67,代码来源:progress.c


示例15: stuff

	u32 stuff( AtomicBitSet( &StuffToDo, ~job, 0x00000000 ) );
	if( stuff == 0 )
	{
		Dynarec_ClearedCPUStuffToDo();
	}
}

#ifdef DAEDALUS_ENABLE_SYNCHRONISATION
static const char * const kRegisterNames[] =
{
	"zr", "at", "v0", "v1", "a0", "a1", "a2", "a3",
	"t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7",
	"s0", "s1", "s2", "s3", "s4", "s5", "s6", "s7",
	"t8", "t9", "k0", "k1", "gp", "sp", "fp", "ra"
};
DAEDALUS_STATIC_ASSERT(ARRAYSIZE(kRegisterNames) == 32);

void SCPUState::Dump()
{
	DBGConsole_Msg(0, "Emulation CPU State:");
	{
		for(int i=0; i<32; i+=4)
		{
			DBGConsole_Msg(0, "%s:%08X %s:%08X %s:%08X %s:%08X",
			kRegisterNames[i+0], gCPUState.CPU[i+0]._u32_0,
			kRegisterNames[i+1], gCPUState.CPU[i+1]._u32_0,
			kRegisterNames[i+2], gCPUState.CPU[i+2]._u32_0,
			kRegisterNames[i+3], gCPUState.CPU[i+3]._u32_0);
		}

		DBGConsole_Msg(0, "TargetPC: %08x", gCPUState.TargetPC);
开发者ID:ThePhoenixRises,项目名称:daedalus,代码行数:31,代码来源:CPU.cpp


示例16: ARRAYSIZE

#endif
	{ WLC_E_WAKE_EVENT, "WAKE_EVENT" },
	{ WLC_E_DCS_REQUEST, "DCS_REQUEST" },
	{ WLC_E_RM_COMPLETE, "RM_COMPLETE" },
#ifdef WLMEDIA_HTSF
	{ WLC_E_HTSFSYNC, "HTSF_SYNC_EVENT" },
#endif
	{ WLC_E_OVERLAY_REQ, "OVERLAY_REQ_EVENT" },
	{ WLC_E_CSA_COMPLETE_IND, "WLC_E_CSA_COMPLETE_IND"},
	{ WLC_E_EXCESS_PM_WAKE_EVENT, "EXCESS_PM_WAKE_EVENT" },
	{ WLC_E_PFN_SCAN_NONE, "PFN_SCAN_NONE" },
	{ WLC_E_PFN_SCAN_ALLGONE, "PFN_SCAN_ALLGONE" },
#ifdef SOFTAP
	{ WLC_E_GTK_PLUMBED, "GTK_PLUMBED" },
#endif
	{ WLC_E_ASSOC_REQ_IE, "ASSOC_REQ_IE" },
	{ WLC_E_ASSOC_RESP_IE, "ASSOC_RESP_IE" },
#ifdef WLTDLS
	{ WLC_E_TDLS_PEER_EVENT, "TDLS_PEER_EVENT" },
#endif /* WLTDLS */
	{ WLC_E_NATIVE, "NATIVE" },
#ifdef WLPKTDLYSTAT
	{ WLC_E_PKTDELAY_IND, "PKTDELAY_IND" },
#endif /* WLPKTDLYSTAT */
	{ WLC_E_SERVICE_FOUND, "SERVICE_FOUND" },
	{ WLC_E_GAS_FRAGMENT_RX, "GAS_FRAGMENT_RX" },
	{ WLC_E_GAS_COMPLETE, "GAS_COMPLETE" }
};

const int bcmevent_names_size = ARRAYSIZE(bcmevent_names);
开发者ID:jameshilliard,项目名称:broadcom-hnd,代码行数:30,代码来源:bcmevent.c


示例17: ARRAYSIZE

// Fail Schedule
//=========================================================
Task_t	tlAssassinFail[] =
{
	{ TASK_STOP_MOVING,			0				},
	{ TASK_SET_ACTIVITY,		(float)ACT_IDLE },
	{ TASK_WAIT_FACE_ENEMY,		(float)2		},
	// { TASK_WAIT_PVS,			(float)0		},
	{ TASK_SET_SCHEDULE,		(float)SCHED_CHASE_ENEMY },
};

Schedule_t	slAssassinFail[] =
{
	{
		tlAssassinFail,
		ARRAYSIZE ( tlAssassinFail ),
		bits_COND_LIGHT_DAMAGE		|
		bits_COND_HEAVY_DAMAGE		|
		bits_COND_PROVOKED			|
		bits_COND_CAN_RANGE_ATTACK1 |
		bits_COND_CAN_RANGE_ATTACK2 |
		bits_COND_CAN_MELEE_ATTACK1 |
		bits_COND_HEAR_SOUND,
	
		bits_SOUND_DANGER |
		bits_SOUND_PLAYER,
		"AssassinFail"
	},
};

开发者ID:Fograin,项目名称:hl-subsmod-ex,代码行数:29,代码来源:monster_human_assassin.cpp


示例18: SHCoCreateInstance

STDAPI SHCoCreateInstance(LPCTSTR pszCLSID, const CLSID * pclsid,
                LPUNKNOWN pUnkOuter, REFIID riid, LPVOID FAR* ppv)
{
    HRESULT hres = ResultFromScode(REGDB_E_CLASSNOTREG);
    CLSID clsidT;
    TCHAR szClass[GUIDSTR_MAX+ARRAYSIZE(c_szInProcServer)];

    if (pclsid)
    {
        if (!pszCLSID)
        {
            StringFromGUID2A(pclsid, szClass, ARRAYSIZE(szClass));
        }
    }
    else
    {
        if (pszCLSID)
        {
            lstrcpy(szClass,pszCLSID);
            if (SUCCEEDED(SHCLSIDFromString(pszCLSID, &clsidT)))
                pclsid=&clsidT;
        }
    }


    if (pclsid)
    {
        LONG err;
        HKEY hkeyDll;
        IClassFactory *pCF;

        Assert(hres == ResultFromScode(REGDB_E_CLASSNOTREG));

        lstrcat(szClass,c_szInProcServer);  // Add "\InProcServer32"

        hres = _FindRegisteredClass(pclsid, &pCF);
        if (SUCCEEDED(hres))
        {
            hres = pCF->lpVtbl->CreateInstance(pCF, pUnkOuter, riid, ppv);
            pCF->lpVtbl->Release(pCF);
        }
        else
        {
            if (g_hkcrCLSID && RegOpenKey(g_hkcrCLSID, szClass, &hkeyDll) == ERROR_SUCCESS)
            {
                TCHAR szDllName[MAX_PATH];
                LONG cbValue = SIZEOF(szDllName);

                //            1         2         3
                //  012345678901234567890123456789012345678  = nul is at 38!
                // "{12345678-1234-1234-1234-123456789012}"
                //
                szClass[38] = TEXT('\0');   // Get rid of "\InProcServer32"

                err = RegQueryValue(hkeyDll, NULL, szDllName, &cbValue);

#ifdef WINNT
                //
                // On NT, we must check to ensure that this CLSID exists in
                // the list of approved CLSIDs that can be used in-process.
                // If not, we fail the creation with ERROR_ACCESS_DENIED.
                // We explicitly allow anything serviced by this DLL
                //

                if (err == ERROR_SUCCESS && NULL != g_hklmApprovedExt)
                {
                    TCHAR szBuf[MAX_PATH];

                    //
                    // Check to see if we are using this DLL
                    //
                    // BUGBUG Assumes no parameters in InProcServer32.  We
                    // should remove this assumption once we lose shellalt,
                    // after which we can just lstrcpyn(,,<length of dll name>);

                    LPCTSTR pszDllName = PathFindFileName(szDllName);

                    if (lstrcmp(pszDllName, TEXT("shell32.dll")) &&
                        lstrcmp(pszDllName, TEXT("shellalt.dll")))
                    {
                        DWORD dwType;
                        TCHAR szValue[MAX_PATH];
                        DWORD cbSize = SIZEOF(szValue);

                        if (ERROR_SUCCESS != RegQueryValueEx(g_hklmApprovedExt,
                                                             szClass,
                                                             0,
                                                             &dwType,
                                                             (LPBYTE) szValue,
                                                             &cbSize))
                        {
                            hres = HRESULT_FROM_WIN32(ERROR_ACCESS_DENIED);
                            return hres;
                        }
                    }
                }
#endif

                if (err == ERROR_SUCCESS)
                {
//.........这里部分代码省略.........
开发者ID:mingpen,项目名称:OpenNT,代码行数:101,代码来源:ole2dup.c


示例19: ARRAYSIZE

static struct Rotation3AnimData r3ad_101C24A0[] =
{
    { 0, { 0, 0, -32767 } },
    { 31, { 0, 0, -32767 } }
};

static struct Rotation3AnimData r3ad_101C24C0[] =
{
    { 0, { 0, -12315, 32735 } },
    { 31, { 0, -12315, 32735 } }
};

static struct AnimFrame_PosRot afpr_101C24E0[] =
{
    { v3ad_101C0A6C, NULL, ARRAYSIZE(v3ad_101C0A6C), 0 },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, r3ad_101C0A8C, 0, ARRAYSIZE(r3ad_101C0A8C) },
    { NULL, r3ad_101C0AAC, 0, ARRAYSIZE(r3ad_101C0AAC) },
    { NULL, r3ad_101C0ACC, 0, ARRAYSIZE(r3ad_101C0ACC) },
    { NULL, NULL, 0, 0 },
    { NULL, r3ad_101C0AF0, 0, ARRAYSIZE(r3ad_101C0AF0) },
    { NULL, r3ad_101C0CF0, 0, ARRAYSIZE(r3ad_101C0CF0) },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
    { NULL, r3ad_101C0EF0, 0, ARRAYSIZE(r3ad_101C0EF0) },
    { NULL, r3ad_101C0F10, 0, ARRAYSIZE(r3ad_101C0F10) },
    { NULL, r3ad_101C0F30, 0, ARRAYSIZE(r3ad_101C0F30) },
    { NULL, NULL, 0, 0 },
    { NULL, NULL, 0, 0 },
开发者ID:sonicretro,项目名称:sadx_decomp,代码行数:30,代码来源:ah2_101C2970.c


示例20: Cvar_DirectSet_internal

该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ ARRAY_CARDINALITY函数代码示例发布时间:2022-05-30
下一篇:
C++ ARRAYLENGTH函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap