本文整理汇总了C++中APP_ERROR_HANDLER函数的典型用法代码示例。如果您正苦于以下问题：C++ APP_ERROR_HANDLER函数的具体用法？C++ APP_ERROR_HANDLER怎么用？C++ APP_ERROR_HANDLER使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了APP_ERROR_HANDLER函数的15个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。
示例1: bond_manager_error_handler
/**@brief Function for handling a Bond Manager error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void bond_manager_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:Dalocklei，项目名称:Wearable-Pedometer，代码行数:8，代码来源:main.c
示例2: conn_params_error_handler
/**@brief Function for handling a Connection Parameters error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:CorBiNO，项目名称:Atomwear，代码行数:8，代码来源:main.c
示例3: conn_params_error_handler
/**@brief Function for handling a Connection Parameters error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void conn_params_error_handler(uint32_t nrf_error) {
APP_ERROR_HANDLER(nrf_error);
uart_tx_status_code("nrf error code:", nrf_error, 0);
}
开发者ID:Joisar，项目名称:BLE-NRF51822-LBS-ANDROID，代码行数:8，代码来源:main.c
示例4: intern_softdevice_events_execute
void intern_softdevice_events_execute(void)
{
if (!m_softdevice_enabled)
{
// SoftDevice not enabled. This can be possible if the SoftDevice was enabled by the
// application without using this module's API (i.e softdevice_handler_init)
return;
}
bool no_more_soc_evts = (m_sys_evt_handler == NULL);
#ifdef BLE_STACK_SUPPORT_REQD
bool no_more_ble_evts = (m_ble_evt_handler == NULL);
#endif
#ifdef ANT_STACK_SUPPORT_REQD
bool no_more_ant_evts = (m_ant_evt_handler == NULL);
#endif
for (;;)
{
uint32_t err_code;
if (!no_more_soc_evts)
{
uint32_t evt_id;
// Pull event from SOC.
err_code = sd_evt_get(&evt_id);
if (err_code == NRF_ERROR_NOT_FOUND)
{
no_more_soc_evts = true;
}
else if (err_code != NRF_SUCCESS)
{
APP_ERROR_HANDLER(err_code);
}
else
{
// Call application's SOC event handler.
m_sys_evt_handler(evt_id);
}
}
#ifdef BLE_STACK_SUPPORT_REQD
// Fetch BLE Events.
if (!no_more_ble_evts)
{
// Pull event from stack
uint16_t evt_len = m_ble_evt_buffer_size;
err_code = sd_ble_evt_get(mp_ble_evt_buffer, &evt_len);
if (err_code == NRF_ERROR_NOT_FOUND)
{
no_more_ble_evts = true;
}
else if (err_code != NRF_SUCCESS)
{
APP_ERROR_HANDLER(err_code);
}
else
{
// Call application's BLE stack event handler.
m_ble_evt_handler((ble_evt_t *)mp_ble_evt_buffer);
}
}
#endif
#ifdef ANT_STACK_SUPPORT_REQD
// Fetch ANT Events.
if (!no_more_ant_evts)
{
// Pull event from stack
err_code = sd_ant_event_get(&m_ant_evt_buffer.channel,
&m_ant_evt_buffer.event,
m_ant_evt_buffer.evt_buffer);
if (err_code == NRF_ERROR_NOT_FOUND)
{
no_more_ant_evts = true;
}
else if (err_code != NRF_SUCCESS)
{
APP_ERROR_HANDLER(err_code);
}
else
{
// Call application's ANT stack event handler.
m_ant_evt_handler(&m_ant_evt_buffer);
}
}
#endif
if (no_more_soc_evts)
{
// There are no remaining System (SOC) events to be fetched from the SoftDevice.
#if defined(ANT_STACK_SUPPORT_REQD) && defined(BLE_STACK_SUPPORT_REQD)
// Check if there are any remaining BLE and ANT events.
if (no_more_ble_evts && no_more_ant_evts)
{
break;
//.........这里部分代码省略.........
开发者ID:evark，项目名称:gcc4mbed，代码行数:101，代码来源:softdevice_handler.c
示例5: pm_evt_handler
//.........这里部分代码省略.........
}
break; // PM_CONN_SEC_ERROR_PIN_OR_KEY_MISSING
default:
break;
}
} break; // PM_EVT_CONN_SEC_FAILED
case PM_EVT_CONN_SEC_CONFIG_REQ:
{
// Reject pairing request from an already bonded peer.
pm_conn_sec_config_t conn_sec_config = {.allow_repairing = false};
pm_conn_sec_config_reply(p_evt->conn_handle, &conn_sec_config);
} break; // PM_EVT_CONN_SEC_CONFIG_REQ
case PM_EVT_STORAGE_FULL:
{
// Run garbage collection on the flash.
err_code = fds_gc();
if (err_code == FDS_ERR_BUSY || err_code == FDS_ERR_NO_SPACE_IN_QUEUES)
{
// Retry.
}
else
{
APP_ERROR_CHECK(err_code);
}
} break; // PM_EVT_STORAGE_FULL
case PM_EVT_ERROR_UNEXPECTED:
// Assert.
APP_ERROR_CHECK(p_evt->params.error_unexpected.error);
break; // PM_EVT_ERROR_UNEXPECTED
case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED:
break; // PM_EVT_PEER_DATA_UPDATE_SUCCEEDED
case PM_EVT_PEER_DATA_UPDATE_FAILED:
// Assert.
APP_ERROR_CHECK_BOOL(false);
break; // PM_EVT_PEER_DATA_UPDATE_FAILED
case PM_EVT_PEER_DELETE_SUCCEEDED:
break; // PM_EVT_PEER_DELETE_SUCCEEDED
case PM_EVT_PEER_DELETE_FAILED:
// Assert.
APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error);
break; // PM_EVT_PEER_DELETE_FAILED
case PM_EVT_PEERS_DELETE_SUCCEEDED:
advertising_start();
break; // PM_EVT_PEERS_DELETE_SUCCEEDED
case PM_EVT_PEERS_DELETE_FAILED:
// Assert.
APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error);
break; // PM_EVT_PEERS_DELETE_FAILED
case PM_EVT_LOCAL_DB_CACHE_APPLIED:
break; // PM_EVT_LOCAL_DB_CACHE_APPLIED
case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED:
// The local database has likely changed, send service changed indications.
pm_local_database_has_changed();
break; // PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED
case PM_EVT_SERVICE_CHANGED_IND_SENT:
break; // PM_EVT_SERVICE_CHANGED_IND_SENT
case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED:
break; // PM_EVT_SERVICE_CHANGED_IND_SENT
default:
// No implementation needed.
break;
}
}
/**@brief Function for performing battery measurement and updating the Battery Level characteristic
* in Battery Service.
*/
static void battery_level_update(void)
{
uint32_t err_code;
uint8_t battery_level;
battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg);
err_code = ble_bas_battery_level_update(&m_bas, battery_level);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_NO_TX_PACKETS) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
}
开发者ID:lyncxy119，项目名称:Sentry，代码行数:101，代码来源:main.c
示例6: service_error_handler
/**@brief Function for handling Service errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void service_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:dhruvkakadiya，项目名称:OpenSJ_Bluz，代码行数:11，代码来源:main.c
示例7: pm_evt_handler
//.........这里部分代码省略.........
else
{
APP_ERROR_CHECK(err_code);
}
}break;//PM_EVT_STORAGE_FULL
case PM_EVT_ERROR_UNEXPECTED:
// Assert.
APP_ERROR_CHECK(p_evt->params.error_unexpected.error);
break;//PM_EVT_ERROR_UNEXPECTED
case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED:
break;//PM_EVT_PEER_DATA_UPDATE_SUCCEEDED
case PM_EVT_PEER_DATA_UPDATE_FAILED:
// Assert.
APP_ERROR_CHECK_BOOL(false);
break;//PM_EVT_PEER_DATA_UPDATE_FAILED
case PM_EVT_PEER_DELETE_SUCCEEDED:
break;//PM_EVT_PEER_DELETE_SUCCEEDED
case PM_EVT_PEER_DELETE_FAILED:
// Assert.
APP_ERROR_CHECK(p_evt->params.peer_delete_failed.error);
break;//PM_EVT_PEER_DELETE_FAILED
case PM_EVT_PEERS_DELETE_SUCCEEDED:
NRF_LOG_PRINTF_DEBUG("%s: PM_EVT_PEERS_DELETE_SUCCEEDED\r\n", __func__);
// m_erasing_bonds = false;
// advertising_init();
// advertising_start();
break;
case PM_EVT_PEERS_DELETE_FAILED:
// Assert.
APP_ERROR_CHECK(p_evt->params.peers_delete_failed_evt.error);
break;//PM_EVT_PEERS_DELETE_FAILED
case PM_EVT_LOCAL_DB_CACHE_APPLIED:
break;//PM_EVT_LOCAL_DB_CACHE_APPLIED
case PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED:
// The local database has likely changed, send service changed indications.
pm_local_database_has_changed();
break;//PM_EVT_LOCAL_DB_CACHE_APPLY_FAILED
case PM_EVT_SERVICE_CHANGED_IND_SENT:
break;//PM_EVT_SERVICE_CHANGED_IND_SENT
case PM_EVT_SERVICE_CHANGED_IND_CONFIRMED:
break;//PM_EVT_SERVICE_CHANGED_IND_CONFIRMED
default:
// No implementation needed.
break;
}
}
/**@brief Function for handling Service errors.
*
* @details A pointer to this function will be passed to each service which may need to inform the
* application about an error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
//static void service_error_handler(uint32_t nrf_error)
//{
// APP_ERROR_HANDLER(nrf_error);
//}
/**@brief Function for performing battery measurement and updating the Battery Level characteristic
* in Battery Service.
*/
static void battery_level_update(void)
{
uint32_t err_code;
uint8_t battery_level;
// battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg);
battery_level = 37;
err_code = ble_bas_battery_level_update(&m_bas, battery_level);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_NO_TX_PACKETS) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
// if (m_adv_state == W_ADV_STATE_IDLE) {
// advertising_init();
// advertising_start();
// }
}
开发者ID:t21，项目名称:HomeHub，代码行数:101，代码来源:main.c
示例8: apple_notification_error_handler
/**@brief Function for handling the Apple Notification Service Client errors.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void apple_notification_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:adan613，项目名称:OpenCloudEnvMonitor，代码行数:8，代码来源:main.c
示例9: profile_event_page_handle
//.........这里部分代码省略.........
const page81_data_t * p_page81_data;
#endif // defined(TRACE_DATA_PAGE)
#if defined(TRACE_CALIBRATION)
const bp_page1_response_data_t * p_page1_general_response_data;
#endif // defined(TRACE_CALIBRATION)
switch (p_event_return->param1)
{
case BP_PAGE_1:
// Calibration message main data page.
#if defined(TRACE_CALIBRATION)
p_page1_general_response_data = bp_rx_data_page1_response_get();
printf("page1:calibration_id %#x\n",
(uint8_t)p_page1_general_response_data->calibration_id);
printf("page1:auto_zero_status %u\n",
(uint8_t)p_page1_general_response_data->auto_zero_status);
printf("page1:calibration_data %i\n",
(uint16_t)p_page1_general_response_data->calibration_data);
#endif // defined(TRACE_CALIBRATION)
break;
case BP_PAGE_16:
// Standard power only page.
#if defined(TRACE_DATA_PAGE)
p_page16_data = bp_rx_data_page16_get();
printf("Page16:event count %u\n", (unsigned int)p_page16_data->event_count);
printf("Page16:pedal power %u\n", (unsigned int)p_page16_data->pedal_power);
printf("Page16:instantaneous cadence %u\n", (unsigned int)p_page16_data->instantaneous_cadence);
printf("Page16:accumulated power %u\n", (unsigned int)p_page16_data->accumulated_power);
printf("Page16:instantaneous power %u\n", (unsigned int)p_page16_data->instantaneous_power);
#endif // defined(TRACE_DATA_PAGE)
break;
case BP_PAGE_17:
// Wheel Torque (WT) main data page.
#if defined(TRACE_DATA_PAGE)
p_page17_data = bp_rx_data_page17_get();
printf("Page17:update_event_counter %u\n", (unsigned int)p_page17_data->update_event_counter);
printf("Page17:wheel_ticks %u\n", (unsigned int)p_page17_data->wheel_ticks);
printf("Page17:instantaneous_cadence %u\n", (unsigned int)p_page17_data->instantaneous_cadence);
printf("Page17:accumulated wheel_period %u\n", (unsigned int)p_page17_data->wheel_period);
printf("Page17:accumulated_torgue %u\n", (unsigned int)p_page17_data->accumulated_torgue);
#endif // defined(TRACE_DATA_PAGE)
break;
case BP_PAGE_18:
// Standard Crank Torque (CT) main data page.
#if defined(TRACE_DATA_PAGE)
p_page18_data = bp_rx_data_page18_get();
printf("Page18:update_event_counter %u\n", (unsigned int)p_page18_data->update_event_counter);
printf("Page18:crank_ticks %u\n", (unsigned int)p_page18_data->crank_ticks);
printf("Page18:instantaneous_cadence %u\n", (unsigned int)p_page18_data->instantaneous_cadence);
printf("Page18:accumulated crank_period %u\n", (unsigned int)p_page18_data->crank_period);
printf("Page18:accumulated_torgue %u\n", (unsigned int)p_page18_data->accumulated_torgue);
#endif // defined(TRACE_DATA_PAGE)
break;
case BP_PAGE_32:
// Standard Crank Torque Frequency (CTF) main data page.
#if defined(TRACE_DATA_PAGE)
p_page32_data = bp_rx_data_page32_get();
printf("Page32:event_counter %u\n", (unsigned int)p_page32_data->update_event_counter);
printf("Page32:slope %u\n", (unsigned int)p_page32_data->slope);
printf("Page32:time_stamp %u\n", (unsigned int)p_page32_data->time_stamp);
printf("Page32:torque_ticks_stamp %u\n", (unsigned int)p_page32_data->torque_ticks_stamp);
printf("Page32:average_cadence %u\n", (unsigned int)p_page32_data->average_cadence);
#endif // defined(TRACE_DATA_PAGE)
break;
case COMMON_PAGE_80:
// Manufacturer's identification common data page.
#if defined(TRACE_DATA_PAGE)
p_page80_data = bp_rx_data_page80_get();
printf("Page80:hw_revision %u\n", (unsigned int)p_page80_data->hw_revision);
printf("Page80:manufacturing_id %u\n", (unsigned int)p_page80_data->manufacturing_id);
printf("Page80:model_number %u\n", (unsigned int)p_page80_data->model_number);
#endif // defined(TRACE_DATA_PAGE)
break;
case COMMON_PAGE_81:
// Product information common data page.
#if defined(TRACE_DATA_PAGE)
p_page81_data = bp_rx_data_page81_get();
printf("Page81:sw_revision %u\n", (unsigned int)p_page81_data->sw_revision);
printf("Page81:serial_number %u\n", (unsigned int)p_page81_data->serial_number);
#endif // defined(TRACE_DATA_PAGE)
break;
default:
APP_ERROR_HANDLER(p_event_return->param1);
break;
}
}
开发者ID:dhruvkakadiya，项目名称:OpenSJ_Bluz，代码行数:101，代码来源:main_bicycle_power_rx.c
示例10: beacon_scanner_error_handler
/**@brief Function for handling a BeaconScanner error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void beacon_scanner_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:451506709，项目名称:automated_machine，代码行数:8，代码来源:main.c
示例11: current_time_error_handler
/**@brief Function for handling the Current Time Service errors.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void current_time_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:mrhexiaoheng，项目名称:nrf51_sdk11，代码行数:8，代码来源:main.c
示例12: uart_event_handle
static void uart_event_handle(app_uart_evt_t * p_event)
{
static uint8_t data_array[BLE_NUS_MAX_DATA_LEN];
static uint8_t index = 0;
uint32_t err_code;
//uint8_t dbg_idx = 0;
//uint8_t nDataLen = 0;
switch (p_event->evt_type)
{
case APP_UART_DATA_READY:
UNUSED_VARIABLE(app_uart_get(&data_array[index]));
//log_print("0x%02x ", data_array[index]);
index++;
if ((data_array[index - 1] == 0x03/*'\n'*/) || (index >= (BLE_NUS_MAX_DATA_LEN)))
{
//err_code = ble_nus_string_send(&m_nus, data_array, index);
err_code = ble_uart_send_data(data_array, index);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
index = 0;
//nrf_delay_ms(10);
}
//nDataLen = sizeof(json);
#if 0
do
{
if (nDataLen < BLE_NUS_MAX_DATA_LEN)
{
ble_uart_send_data((uint8_t *)json+dbg_idx, nDataLen);
dbg_idx += nDataLen;
nDataLen = 0;
}
else
{
ble_uart_send_data((uint8_t *)json+dbg_idx, BLE_NUS_MAX_DATA_LEN);
dbg_idx += BLE_NUS_MAX_DATA_LEN;
nDataLen -= BLE_NUS_MAX_DATA_LEN;
}
nrf_delay_ms(10);
} while(nDataLen > 0);
#endif
break;
case APP_UART_COMMUNICATION_ERROR:
APP_ERROR_HANDLER(p_event->data.error_communication);
break;
case APP_UART_FIFO_ERROR:
APP_ERROR_HANDLER(p_event->data.error_code);
break;
default:
break;
}
}
开发者ID:thkim7816，项目名称:ble_uart，代码行数:69，代码来源:uart.c
示例13: slip_event_handle
/**@brief Function for handling slip events.
*
* @param[in] event The event structure.
*/
void slip_event_handle(hci_slip_evt_t event)
{
uint32_t return_code;
uint32_t err_code;
switch (event.evt_type)
{
case HCI_SLIP_TX_DONE:
tx_sm_event_handle(TX_EVENT_SLIP_TX_DONE);
break;
case HCI_SLIP_RX_RDY:
return_code = packet_type_decode(event.packet, event.packet_length);
switch (return_code)
{
case PKT_TYPE_VENDOR_SPECIFIC:
rx_vendor_specific_pkt_type_handle(event.packet, event.packet_length);
break;
case PKT_TYPE_ACK:
if (rx_ack_pkt_type_handle(event.packet))
{
// Valid expected acknowledgement packet received: set correct TX done event
// callback function result code and execute state change.
m_tx_done_result_code = HCI_TRANSPORT_TX_DONE_SUCCESS;
tx_sm_event_handle(TX_EVENT_VALID_RX_ACK);
}
/* fall-through */
default:
// RX packet dropped: reset memory buffer to slip in order to avoid RX buffer
// overflow.
// If existing mem pool produced RX buffer exists reuse that one. If existing
// mem pool produced RX buffer does not exist try to produce new one. If
// producing fails use the internal acknowledgement buffer.
if (mp_slip_used_rx_buffer != NULL)
{
err_code = hci_slip_rx_buffer_register(mp_slip_used_rx_buffer, RX_BUF_SIZE);
APP_ERROR_CHECK(err_code);
}
else
{
err_code = hci_mem_pool_rx_produce(RX_BUF_SIZE,
(void **)&mp_slip_used_rx_buffer);
APP_ERROR_CHECK_BOOL((err_code == NRF_SUCCESS) ||
(err_code == NRF_ERROR_NO_MEM));
err_code = hci_slip_rx_buffer_register(
(err_code == NRF_SUCCESS) ? mp_slip_used_rx_buffer : m_rx_ack_buffer,
(err_code == NRF_SUCCESS) ? RX_BUF_SIZE : ACK_BUF_SIZE);
APP_ERROR_CHECK(err_code);
}
break;
}
break;
case HCI_SLIP_RX_OVERFLOW:
err_code = hci_slip_rx_buffer_register(m_rx_ack_buffer, ACK_BUF_SIZE);
APP_ERROR_CHECK(err_code);
break;
case HCI_SLIP_ERROR:
APP_ERROR_HANDLER(event.evt_type);
break;
default:
APP_ERROR_HANDLER(event.evt_type);
break;
}
}
开发者ID:CorBiNO，项目名称:Atomwear，代码行数:75，代码来源:hci_transport.c
示例14: pm_evt_handler
//.........这里部分代码省略.........
NRF_LOG_PRINTF("HRS discovered on conn_handle 0x%x\r\n",
m_conn_handle_hrs_c);
err_code = ble_hrs_c_handles_assign(p_hrs_c,
m_conn_handle_hrs_c,
&p_hrs_c_evt->params.peer_db);
APP_ERROR_CHECK(err_code);
// Initiate bonding.
err_code = pm_conn_secure(m_conn_handle_hrs_c, false);
if (err_code != NRF_ERROR_INVALID_STATE)
{
APP_ERROR_CHECK(err_code);
}
// Heart rate service discovered. Enable notification of Heart Rate Measurement.
err_code = ble_hrs_c_hrm_notif_enable(p_hrs_c);
APP_ERROR_CHECK(err_code);
}
} break; // BLE_HRS_C_EVT_DISCOVERY_COMPLETE
case BLE_HRS_C_EVT_HRM_NOTIFICATION:
{
ret_code_t err_code;
NRF_LOG_PRINTF("Heart Rate = %d\r\n", p_hrs_c_evt->params.hrm.hr_value);
err_code = ble_hrs_heart_rate_measurement_send(&m_hrs, p_hrs_c_evt->params.hrm.hr_value);
if ((err_code != NRF_SUCCESS) &&
(err_code != NRF_ERROR_INVALID_STATE) &&
(err_code != BLE_ERROR_NO_TX_PACKETS) &&
(err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING)
)
{
APP_ERROR_HANDLER(err_code);
}
} break; // BLE_HRS_C_EVT_HRM_NOTIFICATION
default:
// No implementation needed.
break;
}
}
/**@brief Handles events coming from Running Speed and Cadence central module.
*/
static void rscs_c_evt_handler(ble_rscs_c_t * p_rscs_c, ble_rscs_c_evt_t * p_rscs_c_evt)
{
switch (p_rscs_c_evt->evt_type)
{
case BLE_RSCS_C_EVT_DISCOVERY_COMPLETE:
{
if (m_conn_handle_rscs_c == BLE_CONN_HANDLE_INVALID)
{
ret_code_t err_code;
m_conn_handle_rscs_c = p_rscs_c_evt->conn_handle;
NRF_LOG_PRINTF("Running Speed and Cadence service discovered on conn_handle 0x%x\r\n", m_conn_handle_rscs_c);
err_code = ble_rscs_c_handles_assign(p_rscs_c,
m_conn_handle_rscs_c,
&p_rscs_c_evt->params.rscs_db);
APP_ERROR_CHECK(err_code);
// Initiate bonding.
err_code = pm_conn_secure(m_conn_handle_rscs_c, false);
开发者ID:dhavalengg06，项目名称:Probe-Dongle-Firmware，代码行数:67，代码来源:main.c
示例15: beacon_advertiser_error_handler
/**@brief Function for handling a BeaconAdvertiser error.
*
* @param[in] nrf_error Error code containing information about what went wrong.
*/
static void beacon_advertiser_error_handler(uint32_t nrf_error)
{
APP_ERROR_HANDLER(nrf_error);
}
开发者ID:BlockWorksCo，项目名称:Playground，代码行数:8，代码来源:main.c
注：本文中的APP_ERROR_HANDLER函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。 |
客服电话
APP下载
官方微信
请发表评论