• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ AFUNPTR函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中AFUNPTR函数的典型用法代码示例。如果您正苦于以下问题:C++ AFUNPTR函数的具体用法?C++ AFUNPTR怎么用?C++ AFUNPTR使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了AFUNPTR函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: CallTrace

VOID CallTrace(TRACE trace, INS ins)
{
	if (!KnobTraceCalls)
		return;

	// RTN = TRACE_Rtn(trace);
	// ADDRINT rtn_addr = RTN_Address(rtn);

	if (INS_IsBranchOrCall(ins) && !INS_IsDirectBranchOrCall(ins)) {
		// Indirect Call
		INS_InsertCall(ins, IPOINT_BEFORE,
				AFUNPTR(EmitIndirectCall),
				IARG_THREAD_ID,
				IARG_INST_PTR,
				IARG_BRANCH_TARGET_ADDR,
				IARG_REG_VALUE, REG_STACK_PTR,
				IARG_END
			      );

	} else if (INS_IsDirectBranchOrCall(ins)) {
		// Direct call..
		ADDRINT target = INS_DirectBranchOrCallTargetAddress(ins);
		INS_InsertCall(ins, IPOINT_BEFORE,
				AFUNPTR(EmitDirectCall),
				IARG_THREAD_ID,
				IARG_INST_PTR,
				IARG_ADDRINT, target,
				IARG_REG_VALUE, REG_STACK_PTR,
				IARG_END
			      );
	} else if (INS_IsRet(ins)) {
		INS_InsertCall(ins, IPOINT_BEFORE,
				AFUNPTR(EmitReturn),
				IARG_THREAD_ID,
				IARG_INST_PTR,
				IARG_FUNCRET_EXITPOINT_VALUE,
				IARG_REG_VALUE, REG_STACK_PTR,
				IARG_END
			      );
	}
}
开发者ID:CYBoys,项目名称:RunTracer,代码行数:41,代码来源:runtrace.cpp


示例2: execute

 inline static AFUNPTR execute (const Routine & rtn, const Prototype & prototype, CALLINGSTD_TYPE callstd_type)
 {
     return
         RTN_ReplaceSignature (rtn,
                               AFUNPTR (REPLACEMENT::execute),
                               IARG_PROTOTYPE,
                               (PROTO)prototype,
                               IARG_FUNCARG_ENTRYPOINT_VALUE, 0,
                               IARG_FUNCARG_ENTRYPOINT_VALUE, 1,
                               IARG_FUNCARG_ENTRYPOINT_VALUE, 2,
                               IARG_END);
 }
开发者ID:EnasAlikhashashashneh,项目名称:OASIS,代码行数:12,代码来源:Routine_T.cpp


示例3: Image

VOID Image(IMG img, VOID *v)
{

    // hook the functions in the image. If these functions are called then it means
    // that pin has not lost control.
    RTN rtn = RTN_FindByName(img, "OutputDebugStringA");
    if (RTN_Valid(rtn))
    {
        RTN_Open(rtn);
        RTN_InsertCall(rtn, IPOINT_BEFORE, AFUNPTR(BeforeOutputDebugString), IARG_END);
        RTN_Close(rtn);
    }
    rtn = RTN_FindByName(img, "OutputDebugStringW");
    if (RTN_Valid(rtn))
    {
        RTN_Open(rtn);
        RTN_InsertCall(rtn, IPOINT_BEFORE, AFUNPTR(BeforeOutputDebugString), IARG_END);
        RTN_Close(rtn);
    }
    
}
开发者ID:dcashman,项目名称:Coursework,代码行数:21,代码来源:debugservice_monitor.cpp


示例4: Instruction

// Is called for every instruction and instruments syscalls
VOID Instruction(INS ins, VOID *v)
{
    // For O/S's (Mac) that don't support PIN_AddSyscallEntryFunction(),
    // instrument the system call instruction.

    if (INS_IsSyscall(ins) && INS_HasFallThrough(ins))
    {
        // Arguments and syscall number is only available before
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(SysBefore),
                       IARG_INST_PTR, IARG_SYSCALL_NUMBER,
                       IARG_SYSARG_VALUE, 0, IARG_SYSARG_VALUE, 1,
                       IARG_SYSARG_VALUE, 2, IARG_SYSARG_VALUE, 3,
                       IARG_SYSARG_VALUE, 4, IARG_SYSARG_VALUE, 5,
                       IARG_END);

        // return value only available after
        INS_InsertCall(ins, IPOINT_AFTER, AFUNPTR(SysAfter),
                       IARG_SYSRET_VALUE,
                       IARG_END);
    }
}
开发者ID:andrewjinyounglee,项目名称:PerVERT,代码行数:22,代码来源:strace.cpp


示例5: Trace

VOID Trace(TRACE trace, VOID *v)
{
    static BOOL programStart = TRUE;

    if (programStart)
    {
        programStart = FALSE;
        next_pc = (void*)INS_Address(BBL_InsHead(TRACE_BblHead(trace)));
    }

    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        // check BBL entry PC
        INS_InsertCall(
            BBL_InsHead(bbl), IPOINT_BEFORE, (AFUNPTR)CheckPc,
            IARG_INST_PTR,
            IARG_END);

        INS tail = BBL_InsTail(bbl);
        
        if (INS_IsBranchOrCall(tail))
        {
            // record taken branch targets
            INS_InsertCall(
                tail, IPOINT_BEFORE, AFUNPTR(RecordPc),
                IARG_INST_PTR,
                IARG_BRANCH_TARGET_ADDR,
                IARG_BRANCH_TAKEN,
                IARG_END);
        }

        if (INS_HasFallThrough(tail))
        {
            // record fall-through
            INS_InsertCall(
                tail, IPOINT_AFTER, (AFUNPTR)RecordPc,
                IARG_INST_PTR,
                IARG_FALLTHROUGH_ADDR,
                IARG_BOOL,
                TRUE,
                IARG_END);
        }

#if defined(TARGET_IA32) || defined(TARGET_IA32E)
        if (INS_IsSysenter(tail) ||
            INS_HasRealRep(tail))
        { // sysenter on x86 has some funny control flow that we can't correctly verify for now
            // Genuinely REP prefixed instructions are also odd, they appear to stutter.
            INS_InsertCall(tail, IPOINT_BEFORE, (AFUNPTR)Skip, IARG_END);
        }
#endif
    }
}
开发者ID:FengXingYuXin,项目名称:SHMA,代码行数:53,代码来源:cflowcheck.cpp


示例6: InstrumentRtn

static void InstrumentRtn(RTN rtn, VOID *)
{
	ADDRINT a = RTN_Address(rtn);
	IMG img = IMG_FindByAddress(a);

	if (IMG_Valid(img) &&
	    IMG_IsMainExecutable(img)) {
		RTN_Open(rtn);
		RTN_InsertCall(rtn, IPOINT_BEFORE, AFUNPTR(FunctionHook), IARG_ADDRINT, a, IARG_END);
		RTN_Close(rtn);
	}
}
开发者ID:chubbymaggie,项目名称:DOP-StaticAssist,代码行数:12,代码来源:TraceFuncs.cpp


示例7: imageLoad

static VOID imageLoad(IMG img, VOID *v)
{
    TraceFile <<  "in image callback of image: " << IMG_Name(img).c_str() << endl;
    if ( IMG_IsMainExecutable(img))
    {
        RTN rtn = RTN_FindByName(img, "AfterAttach");
        if (RTN_Valid(rtn))
        {
            RTN_ReplaceProbed(rtn, AFUNPTR(afterAttachProbe));
        }
    }
}
开发者ID:FengXingYuXin,项目名称:SHMA,代码行数:12,代码来源:imageLoad_tool.cpp


示例8: InstrumentIns

static void InstrumentIns(INS ins, VOID *)
{
    for (UINT32 memIndex = 0;  memIndex < INS_MemoryOperandCount(ins);  memIndex++)
    {
        REG scratchReg = GetScratchReg(memIndex);
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(GetMemAddress),
            IARG_MEMORYOP_EA, memIndex,
            IARG_RETURN_REGS, scratchReg,
            IARG_END);
        INS_RewriteMemoryOperand(ins, memIndex, scratchReg); 
    }
}
开发者ID:FengXingYuXin,项目名称:SHMA,代码行数:12,代码来源:null-rewrite-tool.cpp


示例9: Ins

VOID Ins(INS ins, VOID *v)
{
    static bool before = false, after = false, taken = false;

    if (!before)
    {

        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(beforeCall), IARG_END);
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(beforeCheck), IARG_END);
        
        Priority(IPOINT_BEFORE, ins);
        
        before = true;
    }
    
    if (!after && INS_HasFallThrough(ins))
    {
        INS_InsertCall(ins, IPOINT_AFTER, AFUNPTR(afterCall), IARG_END);
        INS_InsertCall(ins, IPOINT_AFTER, AFUNPTR(afterCheck), IARG_END);
        
        Priority(IPOINT_AFTER, ins);

        after = true;
    }

    if (!taken && INS_IsBranchOrCall(ins))
    {
        INS_InsertCall(ins, IPOINT_TAKEN_BRANCH, AFUNPTR(takenCall), IARG_END);
        INS_InsertCall(ins, IPOINT_TAKEN_BRANCH, AFUNPTR(takenCheck), IARG_END);
        
        Priority(IPOINT_TAKEN_BRANCH, ins);

        taken = true;
    }
}
开发者ID:gungun1010,项目名称:hidden,代码行数:35,代码来源:after.cpp


示例10: Image

// When an image is loaded, check for a MyAlloc function
VOID Image(IMG img, VOID *v)
{
    //fprintf(stderr, "Loading %s\n",IMG_name(img));
    
    for (SEC sec = IMG_SecHead(img); SEC_Valid(sec); sec = SEC_Next(sec))
    {
        //fprintf(stderr, "  sec %s\n", SEC_name(sec).c_str());
        for (RTN rtn = SEC_RtnHead(sec); RTN_Valid(rtn); rtn = RTN_Next(rtn))
        {
            //fprintf(stderr, "    rtn %s\n", RTN_name(rtn).c_str());
            // Swizzle the return value of MyAlloc
            
#if defined(TARGET_MAC)
            if (RTN_Name(rtn) == "_MyAlloc")
#else            
            if (RTN_Name(rtn) == "MyAlloc")
#endif 
            {
                RTN_Open(rtn);
                
                fprintf(stderr, "Adding swizzle to %s\n", "MyAlloc");
                RTN_InsertCall(rtn, IPOINT_AFTER, AFUNPTR(Swizzle), IARG_REG_VALUE, REG_GAX, IARG_RETURN_REGS, REG_GAX, IARG_END);
                RTN_Close(rtn);
            }

#if defined(TARGET_MAC)            
            if (RTN_Name(rtn) == "_MyFree")
#else
            if (RTN_Name(rtn) == "MyFree")    
#endif 
            {
                RTN_Open(rtn);

                fprintf(stderr, "Adding unswizzle to %s\n", "MyFree");
                RTN_InsertCall(rtn, IPOINT_BEFORE, AFUNPTR(SwizzleArg), IARG_FUNCARG_ENTRYPOINT_REFERENCE, 0, IARG_END);
                RTN_Close(rtn);
            }
        }
    }
}
开发者ID:telnetgmike,项目名称:arm-v7a-pintool,代码行数:41,代码来源:swizzle3.C


示例11: Trace

VOID Trace(TRACE trace, VOID *v)
{
    if ( KnobNoSharedLibs.Value()
         && IMG_Type(SEC_Img(RTN_Sec(TRACE_Rtn(trace)))) == IMG_TYPE_SHAREDLIB)
        return;
    
    const BOOL accurate_handling_of_predicates = KnobProfilePredicated.Value();
    
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        // Summarize the stats for the bbl in a 0 terminated list
        // This is done at instrumentation time
        UINT16 * stats = new UINT16[BBL_NumIns(bbl) + 1];

        INT32 index = 0;
        for (INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            // Count the number of times a predicated instruction is actually executed
            // this is expensive and hence disabled by default
            if( INS_IsPredicated(ins) && accurate_handling_of_predicates )
            {
                INS_InsertPredicatedCall(ins,
                                         IPOINT_BEFORE,
                                         AFUNPTR(docount),
                                         IARG_PTR, &(GlobalStatsDynamic.predicated_true[INS_Category(ins)]),
                                         IARG_END);    
            }
            
            stats[index++] = INS_GetStatsIndex(ins);
        }
        stats[index] = 0;

        // Insert instrumentation to count the number of times the bbl is executed
        BBLSTATS * bblstats = new BBLSTATS(stats);
        INS_InsertCall(BBL_InsHead(bbl), IPOINT_BEFORE, AFUNPTR(docount), IARG_PTR, &(bblstats->_counter), IARG_END);

        // Remember the counter and stats so we can compute a summary at the end
        statsList.push_back(bblstats);
    }
}
开发者ID:gungun1010,项目名称:hidden,代码行数:40,代码来源:catmix.cpp


示例12: Trace

VOID Trace(TRACE trace, VOID *v)
{
    for (BBL bbl = TRACE_BblHead(trace); BBL_Valid(bbl); bbl = BBL_Next(bbl))
    {
        string traceString = "";
        
        for ( INS ins = BBL_InsHead(bbl); INS_Valid(ins); ins = INS_Next(ins))
        {
            traceString +=  "%" + INS_Disassemble(ins) + "\n";
        }
        

        // we try to keep the overhead small 
        // so we only insert a call where control flow may leave the current trace
        
        if (KnobNoCompress)
        {
            INS_InsertCall(BBL_InsTail(bbl), IPOINT_BEFORE, AFUNPTR(docount),
                           IARG_PTR, new string(traceString),
                           IARG_END);
        }
        else
        {
            // Identify traces with an id
            count_trace++;

            // Write the actual trace once at instrumentation time
            string m = "@" + decstr(count_trace) + "\n";
            TraceFile.write(m.c_str(), m.size());            
            TraceFile.write(traceString.c_str(), traceString.size());
            
            
            // at run time, just print the id
            string *s = new string(decstr(count_trace) + "\n");
            INS_InsertCall(BBL_InsTail(bbl), IPOINT_BEFORE, AFUNPTR(docount),
                           IARG_PTR, s,
                           IARG_END);
        }
    }
}
开发者ID:alagenchev,项目名称:school_code,代码行数:40,代码来源:trace.cpp


示例13: Instruction

static VOID Instruction(INS ins, VOID *v)
{
    IARG_TYPE ea;

    if (INS_SegmentPrefix(ins))
    {
        if (INS_IsMemoryRead(ins))
            ea = IARG_MEMORYREAD_EA;
        else
            ea = IARG_MEMORYWRITE_EA;

        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(OnSegReference), IARG_UINT32, INS_SegmentRegPrefix(ins),
            IARG_REG_VALUE, INS_SegmentRegPrefix(ins), IARG_INST_PTR, IARG_THREAD_ID, ea, IARG_END);
    }

    REG seg;
    if (WritesSegment(ins, &seg))
    {
        INS_InsertCall(ins, IPOINT_AFTER, AFUNPTR(OnSegWrite), IARG_UINT32, seg, IARG_REG_VALUE, seg,
            IARG_INST_PTR, IARG_THREAD_ID, IARG_END);
    }
}
开发者ID:gungun1010,项目名称:hidden,代码行数:22,代码来源:segtrace_bsd.cpp


示例14: Rtn

static VOID Rtn(RTN rtn, VOID *v)
{
    if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
    {
        return;
    }
    printf("Rtn Instrumenting %s\n", watch_rtn, reinterpret_cast<void *>(RTN_Address(rtn)));
    RTN_Open(rtn);

    RTN_InsertCall(rtn, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "RTN instrumentation", IARG_CALL_ORDER, CALL_ORDER_FIRST+1, IARG_END);
    RTN_Close(rtn);
}
开发者ID:alagenchev,项目名称:school_code,代码行数:13,代码来源:instrumentation_order4.cpp


示例15: Instruction

VOID Instruction(INS ins, VOID *v)
{
    //if (RTN_Valid(INS_Rtn(ins)) && RTN_Name(INS_Rtn(ins)) == "__SEH_epilog4") {
    //	cerr << "image " << IMG_Name(SEC_Img(RTN_Sec(INS_Rtn(ins)))) << endl;
    //}

    if (INS_IsRet(ins)) {

	INS prev = INS_Prev(ins);
	//cout<< "CALL TO RET" << endl;

	INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Ret),
		IARG_THREAD_ID,
		IARG_REG_VALUE, REG_ESP,
		IARG_BRANCH_TARGET_ADDR,
		IARG_INST_PTR,
		IARG_UINT32, (INS_Valid(prev) && INS_Opcode(prev) == XED_CATEGORY_PUSH),
		IARG_END);

    }
    else if (INS_IsCall(ins)) {
	//cout << "CALL TO CALL" << endl;

	INS_InsertCall(ins, IPOINT_TAKEN_BRANCH, AFUNPTR(Call),
		IARG_THREAD_ID,
		IARG_REG_VALUE, REG_ESP,
		IARG_BRANCH_TARGET_ADDR,
		IARG_INST_PTR,
		IARG_END);
    }
    else if (INS_IsMemoryWrite(ins)) {
	//cout<< "CALL TO MEWRITE" << endl;

	INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(MemWrite),
		IARG_THREAD_ID,
		IARG_MEMORYWRITE_EA,
		IARG_END);
    }
}
开发者ID:llubu,项目名称:ROP,代码行数:39,代码来源:loc_rop.cpp


示例16: InstrumentIns

static void InstrumentIns(INS ins, VOID *)
{
    if (IsFirstIns)
    {
        IsFirstIns = FALSE;
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(DoBreakpoint), 
                       IARG_CONTEXT, // IARG_CONST_CONTEXT has much lower overhead 
                                     // than IARG_CONTEX for passing the CONTEXT* 
                                     // to the analysis routine. Note that IARG_CONST_CONTEXT
                                     // passes a read-only CONTEXT* to the analysis routine
                       IARG_THREAD_ID, IARG_END);
    }
}
开发者ID:andrewjinyounglee,项目名称:PerVERT,代码行数:13,代码来源:breaktool.cpp


示例17: Trace

static VOID Trace(TRACE trace, VOID *v)
{
    RTN rtn = TRACE_Rtn(trace);
    
    if (!RTN_Valid(rtn) || RTN_Name(rtn) != watch_rtn)
    {
        return;
    }

    if (TRACE_Address(trace) == RTN_Address(rtn)) 
    {
        INS ins = BBL_InsHead(TRACE_BblHead(trace));
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation3", IARG_END);
        BBL_InsertCall(TRACE_BblHead(trace), IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation2", IARG_END);
        TRACE_InsertCall(trace, IPOINT_BEFORE, AFUNPTR(Emit),
                             IARG_PTR, "Trace instrumentation1", IARG_END);
        
        printf("Trace Instrumenting %s\n", watch_rtn);
    }
}
开发者ID:FengXingYuXin,项目名称:SHMA,代码行数:22,代码来源:instrumentation_order13.cpp


示例18: traceInst

/**
* This function is called
**/
void traceInst(INS ins, VOID*)
{
    ADDRINT address = INS_Address(ins);

    std::string mod_name = getModule( address );
    RegList regs;

    for ( UINT32 i = 0; i < INS_OperandCount(ins); i++ )
    {
        if ( INS_OperandIsReg(ins, i) )
        {
            REG x = INS_OperandReg(ins, i);
            if ( x != REG_INVALID() )
                regs.push_back( x );
        }
    }

    if (isUnknownAddress(address))
    {
        // The address is an address that does not belong to any loaded module.
        // This is potential shellcode. For these instructions a callback
        // function is inserted that dumps information to the trace file when
        // the instruction is actually executed.

        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(dump_shellcode),
                       IARG_PTR, new std::string(dumpInstruction(ins)),
                       IARG_PTR, &regs,
                       IARG_CONTEXT, IARG_END
            );
    }
    else
    {
        if ( !modlist.empty() && (modlist.find(mod_name) == modlist.end()) ) // not concerned
            return;

        // The address is a legit address, meaning it is probably not part of
        // any shellcode. In this case we just log the instruction to dump it
        // later to show when control flow was transfered from legit code to
        // shellcode.

        legitInstructions.push_back(dumpInstruction(ins));

        if (legitInstructions.size() > KnobMaxLegitInsLogSize.Value())
        {
            // Log only up to KnobMaxLegitInsLogSize.Value() instructions or the whole
            // program before the shellcode will be dumped.

            legitInstructions.pop_front();
        }
    }
}
开发者ID:DaviWei,项目名称:pin-tools,代码行数:54,代码来源:shellcode.cpp


示例19: Instruction

VOID Instruction(INS ins, VOID *v)
{
    ADDRINT nextIns;

    if (INS_IsRet(ins)) {

	INS prev = INS_Prev(ins);

	INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(Ret),
		IARG_THREAD_ID,
		IARG_REG_VALUE, REG_STACK_PTR,
		IARG_BRANCH_TARGET_ADDR,
		IARG_INST_PTR,
		IARG_UINT32, (INS_Valid(prev) && INS_Opcode(prev) == XED_CATEGORY_PUSH),
		IARG_END);

    }
    else if (INS_IsCall(ins)) {

	nextIns = INS_NextAddress(ins);

	INS_InsertCall(ins, IPOINT_TAKEN_BRANCH, AFUNPTR(Call),
		IARG_THREAD_ID,
		IARG_REG_VALUE, REG_STACK_PTR,
		IARG_BRANCH_TARGET_ADDR,
		IARG_INST_PTR,
		IARG_ADDRINT, nextIns,
		IARG_END);
    }
    else if (INS_IsMemoryWrite(ins)) {

	INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(MemWrite),
		IARG_THREAD_ID,
		IARG_MEMORYWRITE_EA,
		IARG_INST_PTR,
		IARG_END);
    } 
}
开发者ID:llubu,项目名称:ROP,代码行数:38,代码来源:finalTool.cpp


示例20: Ins

VOID Ins(INS ins, VOID *v)
{
    if (!INS_IsCall(ins))
        return;

    if (foobarAddress != 0
        && INS_IsDirectBranchOrCall(ins)
        && INS_DirectBranchOrCallTargetAddress(ins) == foobarAddress)
    {
        TraceFile << "Instrument call to foobar" << endl;
        INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(FoobarArgs), IARG_G_ARG0_CALLER, IARG_G_ARG1_CALLER, IARG_END);
    }

    static BOOL first = true;

    if (!first)
        return;

    first = false;

    INS_InsertCall(ins, IPOINT_BEFORE, AFUNPTR(CallArgs),  IARG_G_ARG0_CALLER, IARG_END);
    
}
开发者ID:alugupta,项目名称:resilient-systems,代码行数:23,代码来源:callargs.cpp



注:本文中的AFUNPTR函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ AFXPrintPreview函数代码示例发布时间:2022-05-30
下一篇:
C++ AFS_STATCNT函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap