C++ ADS_ERROR函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中ADS_ERROR函数的典型用法代码示例。如果您正苦于以下问题：C++ ADS_ERROR函数的具体用法？C++ ADS_ERROR怎么用？C++ ADS_ERROR使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了ADS_ERROR函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ads_guess_service_principal

ADS_STATUS ads_guess_service_principal(ADS_STRUCT *ads,
				       char **returned_principal)
{
	char *princ = NULL;

	if (ads->server.realm && ads->server.ldap_server) {
		char *server, *server_realm;

		server = SMB_STRDUP(ads->server.ldap_server);
		server_realm = SMB_STRDUP(ads->server.realm);

		if (!server || !server_realm) {
			return ADS_ERROR(LDAP_NO_MEMORY);
		}

		strlower_m(server);
		strupper_m(server_realm);
		asprintf(&princ, "ldap/%[email protected]%s", server, server_realm);

		SAFE_FREE(server);
		SAFE_FREE(server_realm);

		if (!princ) {
			return ADS_ERROR(LDAP_NO_MEMORY);
		}
	} else if (ads->config.realm && ads->config.ldap_server_name) {
		char *server, *server_realm;

		server = SMB_STRDUP(ads->config.ldap_server_name);
		server_realm = SMB_STRDUP(ads->config.realm);

		if (!server || !server_realm) {
			return ADS_ERROR(LDAP_NO_MEMORY);
		}

		strlower_m(server);
		strupper_m(server_realm);
		asprintf(&princ, "ldap/%[email protected]%s", server, server_realm);

		SAFE_FREE(server);
		SAFE_FREE(server_realm);

		if (!princ) {
			return ADS_ERROR(LDAP_NO_MEMORY);
		}
	}

	if (!princ) {
		return ADS_ERROR(LDAP_PARAM_ERROR);
	}

	*returned_principal = princ;

	return ADS_SUCCESS;
}

开发者ID:AllardJ，项目名称:Tomato，代码行数:55，代码来源:util.c

示例2: ads_sasl_spnego_rawkrb5_bind

/* 
   perform a LDAP/SASL/SPNEGO/KRB5 bind
*/
static ADS_STATUS ads_sasl_spnego_rawkrb5_bind(ADS_STRUCT *ads, const char *principal)
{
	DATA_BLOB blob = data_blob_null;
	struct berval cred, *scred = NULL;
	DATA_BLOB session_key = data_blob_null;
	int rc;

	if (ads->ldap.wrap_type > ADS_SASLWRAP_TYPE_PLAIN) {
		return ADS_ERROR_NT(NT_STATUS_NOT_SUPPORTED);
	}

	rc = spnego_gen_negTokenTarg(principal, ads->auth.time_offset, &blob, &session_key, 0,
				     &ads->auth.tgs_expire);

	if (rc) {
		return ADS_ERROR_KRB5(rc);
	}

	/* now send the auth packet and we should be done */
	cred.bv_val = (char *)blob.data;
	cred.bv_len = blob.length;

	rc = ldap_sasl_bind_s(ads->ldap.ld, NULL, "GSS-SPNEGO", &cred, NULL, NULL, &scred);

	data_blob_free(&blob);
	data_blob_free(&session_key);
	if(scred)
		ber_bvfree(scred);

	return ADS_ERROR(rc);
}

开发者ID:0x24bin，项目名称:winexe-1，代码行数:34，代码来源:sasl.c

示例3: ads_sasl_bind

ADS_STATUS ads_sasl_bind(ADS_STRUCT *ads)
{
	const char *attrs[] = {"supportedSASLMechanisms", NULL};
	char **values;
	ADS_STATUS status;
	int i, j;
	LDAPMessage *res;

	/* get a list of supported SASL mechanisms */
	status = ads_do_search(ads, "", LDAP_SCOPE_BASE, "(objectclass=*)", attrs, &res);
	if (!ADS_ERR_OK(status)) return status;

	values = ldap_get_values(ads->ld, res, "supportedSASLMechanisms");

	/* try our supported mechanisms in order */
	for (i=0;sasl_mechanisms[i].name;i++) {
		/* see if the server supports it */
		for (j=0;values && values[j];j++) {
			if (strcmp(values[j], sasl_mechanisms[i].name) == 0) {
				DEBUG(4,("Found SASL mechanism %s\n", values[j]));
				status = sasl_mechanisms[i].fn(ads);
				ldap_value_free(values);
				ldap_msgfree(res);
				return status;
			}
		}
	}

	ldap_value_free(values);
	ldap_msgfree(res);
	return ADS_ERROR(LDAP_AUTH_METHOD_NOT_SUPPORTED);
}

开发者ID:AllardJ，项目名称:Tomato，代码行数:32，代码来源:sasl.c

示例4: ads_find_printer_on_server

/*
  find a printer given the name and the hostname
    Note that results "res" may be allocated on return so that the
    results can be used.  It should be freed using ads_msgfree.
*/
 ADS_STATUS ads_find_printer_on_server(ADS_STRUCT *ads, LDAPMessage **res,
				       const char *printer,
				       const char *servername)
{
	ADS_STATUS status;
	char *srv_dn, **srv_cn, *s = NULL;
	const char *attrs[] = {"*", "nTSecurityDescriptor", NULL};

	status = ads_find_machine_acct(ads, res, servername);
	if (!ADS_ERR_OK(status)) {
		DEBUG(1, ("ads_find_printer_on_server: cannot find host %s in ads\n",
			  servername));
		return status;
	}
	if (ads_count_replies(ads, *res) != 1) {
		ads_msgfree(ads, *res);
		*res = NULL;
		return ADS_ERROR(LDAP_NO_SUCH_OBJECT);
	}
	srv_dn = ldap_get_dn(ads->ldap.ld, *res);
	if (srv_dn == NULL) {
		ads_msgfree(ads, *res);
		*res = NULL;
		return ADS_ERROR(LDAP_NO_MEMORY);
	}
	srv_cn = ldap_explode_dn(srv_dn, 1);
	if (srv_cn == NULL) {
		ldap_memfree(srv_dn);
		ads_msgfree(ads, *res);
		*res = NULL;
		return ADS_ERROR(LDAP_INVALID_DN_SYNTAX);
	}
	ads_msgfree(ads, *res);
	*res = NULL;

	if (asprintf(&s, "(cn=%s-%s)", srv_cn[0], printer) == -1) {
		ldap_memfree(srv_dn);
		return ADS_ERROR(LDAP_NO_MEMORY);
	}
	status = ads_search(ads, res, s, attrs);

	ldap_memfree(srv_dn);
	ldap_value_free(srv_cn);
	SAFE_FREE(s);
	return status;	
}

开发者ID:AIdrifter，项目名称:samba，代码行数:51，代码来源:ldap_printer.c

示例5: ads_add_user_acct

ADS_STATUS ads_add_user_acct(ADS_STRUCT *ads, const char *user, 
			     const char *container, const char *fullname)
{
	TALLOC_CTX *ctx;
	ADS_MODLIST mods;
	ADS_STATUS status;
	const char *upn, *new_dn, *name, *controlstr;
	char *name_escaped = NULL;
	const char *objectClass[] = {"top", "person", "organizationalPerson",
				     "user", NULL};

	if (fullname && *fullname) name = fullname;
	else name = user;

	if (!(ctx = talloc_init("ads_add_user_acct")))
		return ADS_ERROR(LDAP_NO_MEMORY);

	status = ADS_ERROR(LDAP_NO_MEMORY);

	if (!(upn = talloc_asprintf(ctx, "%[email protected]%s", user, ads->config.realm)))
		goto done;
	if (!(name_escaped = escape_rdn_val_string_alloc(name)))
		goto done;
	if (!(new_dn = talloc_asprintf(ctx, "cn=%s,%s,%s", name_escaped, container,
				       ads->config.bind_path)))
		goto done;
	if (!(controlstr = talloc_asprintf(ctx, "%u", (UF_NORMAL_ACCOUNT | UF_ACCOUNTDISABLE))))
		goto done;
	if (!(mods = ads_init_mods(ctx)))
		goto done;

	ads_mod_str(ctx, &mods, "cn", name);
	ads_mod_strlist(ctx, &mods, "objectClass", objectClass);
	ads_mod_str(ctx, &mods, "userPrincipalName", upn);
	ads_mod_str(ctx, &mods, "name", name);
	ads_mod_str(ctx, &mods, "displayName", name);
	ads_mod_str(ctx, &mods, "sAMAccountName", user);
	ads_mod_str(ctx, &mods, "userAccountControl", controlstr);
	status = ads_gen_add(ads, new_dn, mods);

 done:
	SAFE_FREE(name_escaped);
	talloc_destroy(ctx);
	return status;
}

开发者ID:gojdic，项目名称:samba，代码行数:45，代码来源:ldap_user.c

示例6: ads_find_user_acct

/*
  find a user account
*/
 ADS_STATUS ads_find_user_acct(ADS_STRUCT *ads, LDAPMessage **res,
			       const char *user)
{
	ADS_STATUS status;
	char *ldap_exp;
	const char *attrs[] = {"*", NULL};
	char *escaped_user = escape_ldap_string_alloc(user);
	if (!escaped_user) {
		return ADS_ERROR(LDAP_NO_MEMORY);
	}

	if (asprintf(&ldap_exp, "(samAccountName=%s)", escaped_user) == -1) {
		SAFE_FREE(escaped_user);
		return ADS_ERROR(LDAP_NO_MEMORY);
	}
	status = ads_search(ads, res, ldap_exp, attrs);
	SAFE_FREE(ldap_exp);
	SAFE_FREE(escaped_user);
	return status;
}

开发者ID:gojdic，项目名称:samba，代码行数:23，代码来源:ldap_user.c

示例7: ads_generate_service_principal

static ADS_STATUS ads_generate_service_principal(ADS_STRUCT *ads,
						 const char *given_principal,
						 struct ads_service_principal *p)
{
	ADS_STATUS status;
#ifdef HAVE_KRB5
	gss_buffer_desc input_name;
	/* GSS_KRB5_NT_PRINCIPAL_NAME */
	gss_OID_desc nt_principal =
	{10, discard_const_p(char, "\x2a\x86\x48\x86\xf7\x12\x01\x02\x02\x01")};
	uint32 minor_status;
	int gss_rc;
#endif

	ZERO_STRUCTP(p);

	/* I've seen a child Windows 2000 domain not send
	   the principal name back in the first round of
	   the SASL bind reply.  So we guess based on server
	   name and realm.  --jerry  */
	/* Also try best guess when we get the w2k8 ignore principal
	   back, or when we are configured to ignore it - gd,
	   abartlet */

	if (!lp_client_use_spnego_principal() ||
	    !given_principal ||
	    strequal(given_principal, ADS_IGNORE_PRINCIPAL)) {

		status = ads_guess_service_principal(ads, &p->string);
		if (!ADS_ERR_OK(status)) {
			return status;
		}
	} else {
		p->string = SMB_STRDUP(given_principal);
		if (!p->string) {
			return ADS_ERROR(LDAP_NO_MEMORY);
		}
	}

#ifdef HAVE_KRB5
	input_name.value = p->string;
	input_name.length = strlen(p->string);

	gss_rc = gss_import_name(&minor_status, &input_name, &nt_principal, &p->name);
	if (gss_rc) {
		ads_free_service_principal(p);
		return ADS_ERROR_GSS(gss_rc, minor_status);
	}
#endif

	return ADS_SUCCESS;
}

开发者ID:AIdrifter，项目名称:samba，代码行数:52，代码来源:sasl.c

示例8: cmis_ad_flash_init

void cmis_ad_flash_init(void)
#if 0
{
	uint8_t ret = 0;
	g_flash_mem_map = CMIS_MALLOC(CMIS_ADS_FLASH_LEN);
	if(g_flash_mem_map == NULL)
	{
		ADS_ERROR("flash malloc ERROR\n");
		while(1);
	}
	memset(g_flash_mem_map,0,CMIS_ADS_FLASH_LEN*sizeof(uint8_t));
	app_porting_ads_flash_init(CMIS_ADS_FLASH_LEN/*+0x1000*/);
	g_flash_dirty_flag = 0;

	ret = app_porting_ads_flash_read_data(0,g_flash_mem_map,CMIS_ADS_FLASH_LEN);
	if(ret != 1)
	{
		ADS_ERROR("app_porting_ads_flash_read_data failed\n");
		return;
	}

}

开发者ID:github188，项目名称:GX3113C_JIMO，代码行数:22，代码来源:cmis_ads_flash.c

示例9: ads_sasl_bind

ADS_STATUS ads_sasl_bind(ADS_STRUCT *ads)
{
	const char *attrs[] = {"supportedSASLMechanisms", NULL};
	char **values;
	ADS_STATUS status;
	int i, j;
	LDAPMessage *res;
	struct ads_saslwrap *wrap = &ads->ldap_wrap_data;

	/* get a list of supported SASL mechanisms */
	status = ads_do_search(ads, "", LDAP_SCOPE_BASE, "(objectclass=*)", attrs, &res);
	if (!ADS_ERR_OK(status)) return status;

	values = ldap_get_values(ads->ldap.ld, res, "supportedSASLMechanisms");

	if (ads->auth.flags & ADS_AUTH_SASL_SEAL) {
		wrap->wrap_type = ADS_SASLWRAP_TYPE_SEAL;
	} else if (ads->auth.flags & ADS_AUTH_SASL_SIGN) {
		wrap->wrap_type = ADS_SASLWRAP_TYPE_SIGN;
	} else {
		wrap->wrap_type = ADS_SASLWRAP_TYPE_PLAIN;
	}

	/* try our supported mechanisms in order */
	for (i=0;sasl_mechanisms[i].name;i++) {
		/* see if the server supports it */
		for (j=0;values && values[j];j++) {
			if (strcmp(values[j], sasl_mechanisms[i].name) == 0) {
				DEBUG(4,("Found SASL mechanism %s\n", values[j]));
retry:
				status = sasl_mechanisms[i].fn(ads);
				if (status.error_type == ENUM_ADS_ERROR_LDAP &&
				    status.err.rc == LDAP_STRONG_AUTH_REQUIRED &&
				    wrap->wrap_type == ADS_SASLWRAP_TYPE_PLAIN)
				{
					DEBUG(3,("SASL bin got LDAP_STRONG_AUTH_REQUIRED "
						 "retrying with signing enabled\n"));
					wrap->wrap_type = ADS_SASLWRAP_TYPE_SIGN;
					goto retry;
				}
				ldap_value_free(values);
				ldap_msgfree(res);
				return status;
			}
		}
	}

	ldap_value_free(values);
	ldap_msgfree(res);
	return ADS_ERROR(LDAP_AUTH_METHOD_NOT_SUPPORTED);
}

开发者ID:Alexander--，项目名称:samba，代码行数:51，代码来源:sasl.c

示例10: ads_do_search_all_sd_flags

ADS_STATUS ads_do_search_all_sd_flags (ADS_STRUCT *ads, const char *dn, int scope,
                                              const char *filter, const char **attrs,
                                              uint32_t sd_flags, LDAPMessage **res)
{
	int rv;
	struct ldb_request *req;
	struct ldb_control **controls;
	struct ldb_parse_tree *tree;
	struct ldb_dn *ldb_dn;

	controls = talloc_zero_array(ads, struct ldb_control *, 2);
	controls[0] = talloc(ads, struct ldb_control);
	controls[0]->oid = LDB_CONTROL_SD_FLAGS_OID;
	controls[0]->data = &sd_flags;
	controls[0]->critical = 1;

	tree = ldb_parse_tree(ads, filter);

	ldb_dn = ldb_dn_new(ads, ads->ldbctx, dn);

	rv = ldb_build_search_req_ex(&req, ads->ldbctx, (TALLOC_CTX *)res, ldb_dn, scope, tree, attrs, controls,
	                             res, ldb_search_default_callback, NULL);
	if (rv != LDB_SUCCESS) {
		talloc_free(*res);
		talloc_free(req);
		talloc_free(tree);
		return ADS_ERROR(rv);
	}
	rv = ldb_request(ads->ldbctx, req);
	if (rv == LDB_SUCCESS) {
		rv = ldb_wait(req->handle, LDB_WAIT_ALL);
	}

	talloc_free(req);
	talloc_free(tree);
	return ADS_ERROR(rv);

}

开发者ID:0x24bin，项目名称:winexe-1，代码行数:38，代码来源:ads_convenience.c

示例11: ads_search_retry_sid

 ADS_STATUS ads_search_retry_sid(ADS_STRUCT *ads, LDAPMessage **res, 
				 const struct dom_sid *sid,
				 const char **attrs)
{
	char *dn, *sid_string;
	ADS_STATUS status;

	sid_string = sid_binstring_hex_talloc(talloc_tos(), sid);
	if (sid_string == NULL) {
		return ADS_ERROR(LDAP_NO_MEMORY);
	}

	if (!asprintf(&dn, "<SID=%s>", sid_string)) {
		TALLOC_FREE(sid_string);
		return ADS_ERROR(LDAP_NO_MEMORY);
	}

	status = ads_do_search_retry(ads, dn, LDAP_SCOPE_BASE,
				   "(objectclass=*)", attrs, res);
	SAFE_FREE(dn);
	TALLOC_FREE(sid_string);
	return status;
}

开发者ID:Distrotech，项目名称:samba，代码行数:23，代码来源:ldap_utils.c

示例12: ads_add_group_acct

ADS_STATUS ads_add_group_acct(ADS_STRUCT *ads, const char *group, 
			      const char *container, const char *comment)
{
	TALLOC_CTX *ctx;
	ADS_MODLIST mods;
	ADS_STATUS status;
	char *new_dn;
	char *name_escaped = NULL;
	const char *objectClass[] = {"top", "group", NULL};

	if (!(ctx = talloc_init("ads_add_group_acct")))
		return ADS_ERROR(LDAP_NO_MEMORY);

	status = ADS_ERROR(LDAP_NO_MEMORY);

	if (!(name_escaped = escape_rdn_val_string_alloc(group)))
		goto done;
	if (!(new_dn = talloc_asprintf(ctx, "cn=%s,%s,%s", name_escaped, container,
				       ads->config.bind_path)))
		goto done;
	if (!(mods = ads_init_mods(ctx)))
		goto done;

	ads_mod_str(ctx, &mods, "cn", group);
	ads_mod_strlist(ctx, &mods, "objectClass",objectClass);
	ads_mod_str(ctx, &mods, "name", group);
	if (comment && *comment) 
		ads_mod_str(ctx, &mods, "description", comment);
	ads_mod_str(ctx, &mods, "sAMAccountName", group);
	status = ads_gen_add(ads, new_dn, mods);

 done:
	SAFE_FREE(name_escaped);
	talloc_destroy(ctx);
	return status;
}

开发者ID:gojdic，项目名称:samba，代码行数:36，代码来源:ldap_user.c

示例13: ads_guess_target

static ADS_STATUS ads_guess_target(ADS_STRUCT *ads,
				   char **service,
				   char **hostname,
				   char **principal)
{
	ADS_STATUS status = ADS_ERROR(LDAP_NO_MEMORY);
	char *princ = NULL;
	TALLOC_CTX *frame;
	char *server = NULL;
	char *realm = NULL;
	int rc;

	frame = talloc_stackframe();
	if (frame == NULL) {
		return ADS_ERROR(LDAP_NO_MEMORY);
	}

	if (ads->server.realm && ads->server.ldap_server) {
		server = strlower_talloc(frame, ads->server.ldap_server);
		if (server == NULL) {
			goto out;
		}

		realm = strupper_talloc(frame, ads->server.realm);
		if (realm == NULL) {
			goto out;
		}

		/*
		 * If we got a name which is bigger than a NetBIOS name,
		 * but isn't a FQDN, create one.
		 */
		if (strlen(server) > 15 && strstr(server, ".") == NULL) {
			char *dnsdomain;

			dnsdomain = strlower_talloc(frame, ads->server.realm);
			if (dnsdomain == NULL) {
				goto out;
			}

			server = talloc_asprintf(frame,
						 "%s.%s",
						 server, dnsdomain);
			if (server == NULL) {
				goto out;
			}
		}
	} else if (ads->config.realm && ads->config.ldap_server_name) {
		server = strlower_talloc(frame, ads->config.ldap_server_name);
		if (server == NULL) {
			goto out;
		}

		realm = strupper_talloc(frame, ads->config.realm);
		if (realm == NULL) {
			goto out;
		}

		/*
		 * If we got a name which is bigger than a NetBIOS name,
		 * but isn't a FQDN, create one.
		 */
		if (strlen(server) > 15 && strstr(server, ".") == NULL) {
			char *dnsdomain;

			dnsdomain = strlower_talloc(frame, ads->server.realm);
			if (dnsdomain == NULL) {
				goto out;
			}

			server = talloc_asprintf(frame,
						 "%s.%s",
						 server, dnsdomain);
			if (server == NULL) {
				goto out;
			}
		}
	}

	if (server == NULL || realm == NULL) {
		goto out;
	}

	*service = SMB_STRDUP("ldap");
	if (*service == NULL) {
		status = ADS_ERROR(LDAP_PARAM_ERROR);
		goto out;
	}
	*hostname = SMB_STRDUP(server);
	if (*hostname == NULL) {
		SAFE_FREE(*service);
		status = ADS_ERROR(LDAP_PARAM_ERROR);
		goto out;
	}
	rc = asprintf(&princ, "ldap/%[email protected]%s", server, realm);
	if (rc == -1 || princ == NULL) {
		SAFE_FREE(*service);
		SAFE_FREE(*hostname);
		status = ADS_ERROR(LDAP_PARAM_ERROR);
		goto out;
//.........这里部分代码省略.........

开发者ID:Alexander--，项目名称:samba，代码行数:101，代码来源:sasl.c

示例14: bind

/* 
   perform a LDAP/SASL/SPNEGO/{NTLMSSP,KRB5} bind (just how many layers can
   we fit on one socket??)
*/
static ADS_STATUS ads_sasl_spnego_gensec_bind(ADS_STRUCT *ads,
				const char *sasl,
				enum credentials_use_kerberos krb5_state,
				const char *target_service,
				const char *target_hostname,
				const DATA_BLOB server_blob)
{
	DATA_BLOB blob_in = data_blob_null;
	DATA_BLOB blob_out = data_blob_null;
	int rc;
	NTSTATUS nt_status;
	ADS_STATUS status;
	struct auth_generic_state *auth_generic_state;
	bool use_spnego_principal = lp_client_use_spnego_principal();
	const char *sasl_list[] = { sasl, NULL };
	NTTIME end_nt_time;
	struct ads_saslwrap *wrap = &ads->ldap_wrap_data;

	nt_status = auth_generic_client_prepare(NULL, &auth_generic_state);
	if (!NT_STATUS_IS_OK(nt_status)) {
		return ADS_ERROR_NT(nt_status);
	}

	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_username(auth_generic_state, ads->auth.user_name))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_domain(auth_generic_state, ads->auth.realm))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_password(auth_generic_state, ads->auth.password))) {
		return ADS_ERROR_NT(nt_status);
	}

	if (server_blob.length == 0) {
		use_spnego_principal = false;
	}

	if (krb5_state == CRED_DONT_USE_KERBEROS) {
		use_spnego_principal = false;
	}

	cli_credentials_set_kerberos_state(auth_generic_state->credentials,
					   krb5_state);

	if (target_service != NULL) {
		nt_status = gensec_set_target_service(
					auth_generic_state->gensec_security,
					target_service);
		if (!NT_STATUS_IS_OK(nt_status)) {
			return ADS_ERROR_NT(nt_status);
		}
	}

	if (target_hostname != NULL) {
		nt_status = gensec_set_target_hostname(
					auth_generic_state->gensec_security,
					target_hostname);
		if (!NT_STATUS_IS_OK(nt_status)) {
			return ADS_ERROR_NT(nt_status);
		}
	}

	if (target_service != NULL && target_hostname != NULL) {
		use_spnego_principal = false;
	}

	switch (wrap->wrap_type) {
	case ADS_SASLWRAP_TYPE_SEAL:
		gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
		gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SEAL);
		break;
	case ADS_SASLWRAP_TYPE_SIGN:
		if (ads->auth.flags & ADS_AUTH_SASL_FORCE) {
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
		} else {
			/*
			 * windows servers are broken with sign only,
			 * so we let the NTLMSSP backend to seal here,
			 * via GENSEC_FEATURE_LDAP_STYLE.
			 */
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_LDAP_STYLE);
		}
		break;
	case ADS_SASLWRAP_TYPE_PLAIN:
		break;
	}

	nt_status = auth_generic_client_start_by_sasl(auth_generic_state,
						      sasl_list);
	if (!NT_STATUS_IS_OK(nt_status)) {
		return ADS_ERROR_NT(nt_status);
	}

	rc = LDAP_SASL_BIND_IN_PROGRESS;
	nt_status = NT_STATUS_MORE_PROCESSING_REQUIRED;
//.........这里部分代码省略.........

开发者ID:Alexander--，项目名称:samba，代码行数:101，代码来源:sasl.c

示例15: ads_do_search_retry

/*
  a wrapper around ldap_search_s that retries depending on the error code
  this is supposed to catch dropped connections and auto-reconnect
*/
ADS_STATUS ads_do_search_retry(ADS_STRUCT *ads, const char *bind_path, int scope, 
			       const char *expr,
			       const char **attrs, void **res)
{
	ADS_STATUS status;
	int count = 3;
	char *bp;

	*res = NULL;

	if (!ads->ld &&
	    time(NULL) - ads->last_attempt < ADS_RECONNECT_TIME) {
		return ADS_ERROR(LDAP_SERVER_DOWN);
	}

	bp = strdup(bind_path);

	if (!bp) {
		return ADS_ERROR_NT(NT_STATUS_NO_MEMORY);
	}

	while (count--) {
		*res = NULL;
		status = ads_do_search_all(ads, bp, scope, expr, attrs, res);
		if (ADS_ERR_OK(status)) {
			DEBUG(5,("Search for %s gave %d replies\n",
				 expr, ads_count_replies(ads, *res)));
			SAFE_FREE(bp);
			return status;
		}

		if (*res) 
			ads_msgfree(ads, *res);
		*res = NULL;
		
		DEBUG(3,("Reopening ads connection to realm '%s' after error %s\n", 
			 ads->config.realm, ads_errstr(status)));
			 
		if (ads->ld) {
			ldap_unbind(ads->ld); 
		}
		
		ads->ld = NULL;
		status = ads_connect(ads);
		
		if (!ADS_ERR_OK(status)) {
			DEBUG(1,("ads_search_retry: failed to reconnect (%s)\n",
				 ads_errstr(status)));
			ads_destroy(&ads);
			SAFE_FREE(bp);
			return status;
		}
	}
        SAFE_FREE(bp);

	if (!ADS_ERR_OK(status))
		DEBUG(1,("ads reopen failed after error %s\n", 
			 ads_errstr(status)));

	return status;
}

开发者ID:Nymphetaminer，项目名称:dsl-n55u，代码行数:65，代码来源:ldap_utils.c

示例16: bind

/* 
   perform a LDAP/SASL/SPNEGO/NTLMSSP bind (just how many layers can
   we fit on one socket??)
*/
static ADS_STATUS ads_sasl_spnego_ntlmssp_bind(ADS_STRUCT *ads)
{
	DATA_BLOB msg1 = data_blob_null;
	DATA_BLOB blob = data_blob_null;
	DATA_BLOB blob_in = data_blob_null;
	DATA_BLOB blob_out = data_blob_null;
	struct berval cred, *scred = NULL;
	int rc;
	NTSTATUS nt_status;
	ADS_STATUS status;
	int turn = 1;

	struct auth_generic_state *auth_generic_state;

	nt_status = auth_generic_client_prepare(NULL, &auth_generic_state);
	if (!NT_STATUS_IS_OK(nt_status)) {
		return ADS_ERROR_NT(nt_status);
	}

	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_username(auth_generic_state, ads->auth.user_name))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_domain(auth_generic_state, ads->auth.realm))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = auth_generic_set_password(auth_generic_state, ads->auth.password))) {
		return ADS_ERROR_NT(nt_status);
	}

	switch (ads->ldap.wrap_type) {
	case ADS_SASLWRAP_TYPE_SEAL:
		gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
		gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SEAL);
		break;
	case ADS_SASLWRAP_TYPE_SIGN:
		if (ads->auth.flags & ADS_AUTH_SASL_FORCE) {
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
		} else {
			/*
			 * windows servers are broken with sign only,
			 * so we need to use seal here too
			 */
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SIGN);
			gensec_want_feature(auth_generic_state->gensec_security, GENSEC_FEATURE_SEAL);
			ads->ldap.wrap_type = ADS_SASLWRAP_TYPE_SEAL;
		}
		break;
	case ADS_SASLWRAP_TYPE_PLAIN:
		break;
	}

	nt_status = auth_generic_client_start(auth_generic_state, GENSEC_OID_NTLMSSP);
	if (!NT_STATUS_IS_OK(nt_status)) {
		return ADS_ERROR_NT(nt_status);
	}

	blob_in = data_blob_null;

	do {
		nt_status = gensec_update(auth_generic_state->gensec_security,
					  talloc_tos(), NULL, blob_in, &blob_out);
		data_blob_free(&blob_in);
		if ((NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED) 
		     || NT_STATUS_IS_OK(nt_status))
		    && blob_out.length) {
			if (turn == 1) {
				const char *OIDs_ntlm[] = {OID_NTLMSSP, NULL};
				/* and wrap it in a SPNEGO wrapper */
				msg1 = spnego_gen_negTokenInit(talloc_tos(),
						OIDs_ntlm, &blob_out, NULL);
			} else {
				/* wrap it in SPNEGO */
				msg1 = spnego_gen_auth(talloc_tos(), blob_out);
			}

			data_blob_free(&blob_out);

			cred.bv_val = (char *)msg1.data;
			cred.bv_len = msg1.length;
			scred = NULL;
			rc = ldap_sasl_bind_s(ads->ldap.ld, NULL, "GSS-SPNEGO", &cred, NULL, NULL, &scred);
			data_blob_free(&msg1);
			if ((rc != LDAP_SASL_BIND_IN_PROGRESS) && (rc != 0)) {
				if (scred) {
					ber_bvfree(scred);
				}

				TALLOC_FREE(auth_generic_state);
				return ADS_ERROR(rc);
			}
			if (scred) {
				blob = data_blob(scred->bv_val, scred->bv_len);
				ber_bvfree(scred);
			} else {
				blob = data_blob_null;
			}
//.........这里部分代码省略.........

开发者ID:AIdrifter，项目名称:samba，代码行数:101，代码来源:sasl.c

示例17: ads_sasl_spnego_bind

/* 
   this performs a SASL/SPNEGO bind
*/
static ADS_STATUS ads_sasl_spnego_bind(ADS_STRUCT *ads)
{
	struct berval *scred=NULL;
	int rc, i;
	ADS_STATUS status;
	DATA_BLOB blob;
	char *given_principal = NULL;
	char *OIDs[ASN1_MAX_OIDS];
#ifdef HAVE_KRB5
	bool got_kerberos_mechanism = False;
#endif

	rc = ldap_sasl_bind_s(ads->ldap.ld, NULL, "GSS-SPNEGO", NULL, NULL, NULL, &scred);

	if (rc != LDAP_SASL_BIND_IN_PROGRESS) {
		status = ADS_ERROR(rc);
		goto failed;
	}

	blob = data_blob(scred->bv_val, scred->bv_len);

	ber_bvfree(scred);

#if 0
	file_save("sasl_spnego.dat", blob.data, blob.length);
#endif

	/* the server sent us the first part of the SPNEGO exchange in the negprot 
	   reply */
	if (!spnego_parse_negTokenInit(blob, OIDs, &given_principal)) {
		data_blob_free(&blob);
		status = ADS_ERROR(LDAP_OPERATIONS_ERROR);
		goto failed;
	}
	data_blob_free(&blob);

	/* make sure the server understands kerberos */
	for (i=0;OIDs[i];i++) {
		DEBUG(3,("ads_sasl_spnego_bind: got OID=%s\n", OIDs[i]));
#ifdef HAVE_KRB5
		if (strcmp(OIDs[i], OID_KERBEROS5_OLD) == 0 ||
		    strcmp(OIDs[i], OID_KERBEROS5) == 0) {
			got_kerberos_mechanism = True;
		}
#endif
		talloc_free(OIDs[i]);
	}
	DEBUG(3,("ads_sasl_spnego_bind: got server principal name = %s\n", given_principal));

#ifdef HAVE_KRB5
	if (!(ads->auth.flags & ADS_AUTH_DISABLE_KERBEROS) &&
	    got_kerberos_mechanism) 
	{
		struct ads_service_principal p;

		status = ads_generate_service_principal(ads, given_principal, &p);
		TALLOC_FREE(given_principal);
		if (!ADS_ERR_OK(status)) {
			return status;
		}

		status = ads_sasl_spnego_krb5_bind(ads, &p);
		if (ADS_ERR_OK(status)) {
			ads_free_service_principal(&p);
			return status;
		}

		DEBUG(10,("ads_sasl_spnego_krb5_bind failed with: %s, "
			  "calling kinit\n", ads_errstr(status)));

		status = ADS_ERROR_KRB5(ads_kinit_password(ads)); 

		if (ADS_ERR_OK(status)) {
			status = ads_sasl_spnego_krb5_bind(ads, &p);
			if (!ADS_ERR_OK(status)) {
				DEBUG(0,("kinit succeeded but "
					"ads_sasl_spnego_krb5_bind failed: %s\n",
					ads_errstr(status)));
			}
		}

		ads_free_service_principal(&p);

		/* only fallback to NTLMSSP if allowed */
		if (ADS_ERR_OK(status) || 
		    !(ads->auth.flags & ADS_AUTH_ALLOW_NTLMSSP)) {
			return status;
		}
	} else
#endif
	{
		TALLOC_FREE(given_principal);
	}

	/* lets do NTLMSSP ... this has the big advantage that we don't need
	   to sync clocks, and we don't rely on special versions of the krb5 
	   library for HMAC_MD4 encryption */
//.........这里部分代码省略.........

开发者ID:0x24bin，项目名称:winexe-1，代码行数:101，代码来源:sasl.c

示例18: bind

/* 
   perform a LDAP/SASL/SPNEGO/NTLMSSP bind (just how many layers can
   we fit on one socket??)
*/
static ADS_STATUS ads_sasl_spnego_ntlmssp_bind(ADS_STRUCT *ads)
{
	DATA_BLOB msg1 = data_blob_null;
	DATA_BLOB blob = data_blob_null;
	DATA_BLOB blob_in = data_blob_null;
	DATA_BLOB blob_out = data_blob_null;
	struct berval cred, *scred = NULL;
	int rc;
	NTSTATUS nt_status;
	ADS_STATUS status;
	int turn = 1;
	uint32 features = 0;

	struct ntlmssp_state *ntlmssp_state;

	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_client_start(&ntlmssp_state))) {
		return ADS_ERROR_NT(nt_status);
	}
	ntlmssp_state->neg_flags &= ~NTLMSSP_NEGOTIATE_SIGN;

	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_username(ntlmssp_state, ads->auth.user_name))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_domain(ntlmssp_state, ads->auth.realm))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_password(ntlmssp_state, ads->auth.password))) {
		return ADS_ERROR_NT(nt_status);
	}

	switch (ads->ldap.wrap_type) {
	case ADS_SASLWRAP_TYPE_SEAL:
		features = NTLMSSP_FEATURE_SIGN | NTLMSSP_FEATURE_SEAL;
		break;
	case ADS_SASLWRAP_TYPE_SIGN:
		if (ads->auth.flags & ADS_AUTH_SASL_FORCE) {
			features = NTLMSSP_FEATURE_SIGN;
		} else {
			/*
			 * windows servers are broken with sign only,
			 * so we need to use seal here too
			 */
			features = NTLMSSP_FEATURE_SIGN | NTLMSSP_FEATURE_SEAL;
			ads->ldap.wrap_type = ADS_SASLWRAP_TYPE_SEAL;
		}
		break;
	case ADS_SASLWRAP_TYPE_PLAIN:
		break;
	}

	ntlmssp_want_feature(ntlmssp_state, features);

	blob_in = data_blob_null;

	do {
		nt_status = ntlmssp_update(ntlmssp_state, 
					   blob_in, &blob_out);
		data_blob_free(&blob_in);
		if ((NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED) 
		     || NT_STATUS_IS_OK(nt_status))
		    && blob_out.length) {
			if (turn == 1) {
				/* and wrap it in a SPNEGO wrapper */
				msg1 = gen_negTokenInit(OID_NTLMSSP, blob_out);
			} else {
				/* wrap it in SPNEGO */
				msg1 = spnego_gen_auth(blob_out);
			}

			data_blob_free(&blob_out);

			cred.bv_val = (char *)msg1.data;
			cred.bv_len = msg1.length;
			scred = NULL;
			rc = ldap_sasl_bind_s(ads->ldap.ld, NULL, "GSS-SPNEGO", &cred, NULL, NULL, &scred);
			data_blob_free(&msg1);
			if ((rc != LDAP_SASL_BIND_IN_PROGRESS) && (rc != 0)) {
				if (scred) {
					ber_bvfree(scred);
				}

				ntlmssp_end(&ntlmssp_state);
				return ADS_ERROR(rc);
			}
			if (scred) {
				blob = data_blob(scred->bv_val, scred->bv_len);
				ber_bvfree(scred);
			} else {
				blob = data_blob_null;
			}

		} else {

			ntlmssp_end(&ntlmssp_state);
			data_blob_free(&blob_out);
			return ADS_ERROR_NT(nt_status);
//.........这里部分代码省略.........

开发者ID:0x24bin，项目名称:winexe-1，代码行数:101，代码来源:sasl.c

示例19: bind

/* 
   perform a LDAP/SASL/SPNEGO/NTLMSSP bind (just how many layers can
   we fit on one socket??)
*/
static ADS_STATUS ads_sasl_spnego_ntlmssp_bind(ADS_STRUCT *ads)
{
	DATA_BLOB msg1 = data_blob(NULL, 0);
	DATA_BLOB blob = data_blob(NULL, 0);
	DATA_BLOB blob_in = data_blob(NULL, 0);
	DATA_BLOB blob_out = data_blob(NULL, 0);
	struct berval cred, *scred = NULL;
	int rc;
	NTSTATUS nt_status;
	int turn = 1;

	struct ntlmssp_state *ntlmssp_state;

	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_client_start(&ntlmssp_state))) {
		return ADS_ERROR_NT(nt_status);
	}
	ntlmssp_state->neg_flags &= ~NTLMSSP_NEGOTIATE_SIGN;

	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_username(ntlmssp_state, ads->auth.user_name))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_domain(ntlmssp_state, ads->auth.realm))) {
		return ADS_ERROR_NT(nt_status);
	}
	if (!NT_STATUS_IS_OK(nt_status = ntlmssp_set_password(ntlmssp_state, ads->auth.password))) {
		return ADS_ERROR_NT(nt_status);
	}

	blob_in = data_blob(NULL, 0);

	do {
		nt_status = ntlmssp_update(ntlmssp_state, 
					   blob_in, &blob_out);
		data_blob_free(&blob_in);
		if ((NT_STATUS_EQUAL(nt_status, NT_STATUS_MORE_PROCESSING_REQUIRED) 
		     || NT_STATUS_IS_OK(nt_status))
		    && blob_out.length) {
			if (turn == 1) {
				/* and wrap it in a SPNEGO wrapper */
				msg1 = gen_negTokenInit(OID_NTLMSSP, blob_out);
			} else {
				/* wrap it in SPNEGO */
				msg1 = spnego_gen_auth(blob_out);
			}

			data_blob_free(&blob_out);

			cred.bv_val = (char *)msg1.data;
			cred.bv_len = msg1.length;
			scred = NULL;
			rc = ldap_sasl_bind_s(ads->ld, NULL, "GSS-SPNEGO", &cred, NULL, NULL, &scred);
			data_blob_free(&msg1);
			if ((rc != LDAP_SASL_BIND_IN_PROGRESS) && (rc != 0)) {
				if (scred) {
					ber_bvfree(scred);
				}

				ntlmssp_end(&ntlmssp_state);
				return ADS_ERROR(rc);
			}
			if (scred) {
				blob = data_blob(scred->bv_val, scred->bv_len);
				ber_bvfree(scred);
			} else {
				blob = data_blob(NULL, 0);
			}

		} else {

			ntlmssp_end(&ntlmssp_state);
			data_blob_free(&blob_out);
			return ADS_ERROR_NT(nt_status);
		}
		
		if ((turn == 1) && 
		    (rc == LDAP_SASL_BIND_IN_PROGRESS)) {
			DATA_BLOB tmp_blob = data_blob(NULL, 0);
			/* the server might give us back two challenges */
			if (!spnego_parse_challenge(blob, &blob_in, 
						    &tmp_blob)) {

				ntlmssp_end(&ntlmssp_state);
				data_blob_free(&blob);
				DEBUG(3,("Failed to parse challenges\n"));
				return ADS_ERROR_NT(NT_STATUS_INVALID_PARAMETER);
			}
			data_blob_free(&tmp_blob);
		} else if (rc == LDAP_SASL_BIND_IN_PROGRESS) {
			if (!spnego_parse_auth_response(blob, nt_status, 
							&blob_in)) {

				ntlmssp_end(&ntlmssp_state);
				data_blob_free(&blob);
				DEBUG(3,("Failed to parse auth response\n"));
				return ADS_ERROR_NT(NT_STATUS_INVALID_PARAMETER);
			}
//.........这里部分代码省略.........

开发者ID:AllardJ，项目名称:Tomato，代码行数:101，代码来源:sasl.c

示例20: ads_do_search_retry_internal

/*
  a wrapper around ldap_search_s that retries depending on the error code
  this is supposed to catch dropped connections and auto-reconnect
*/
static ADS_STATUS ads_do_search_retry_internal(ADS_STRUCT *ads, const char *bind_path, int scope, 
					       const char *expr,
					       const char **attrs, void *args,
					       LDAPMessage **res)
{
	ADS_STATUS status = ADS_SUCCESS;
	int count = 3;
	char *bp;

	*res = NULL;

	if (!ads->ldap.ld &&
	    time_mono(NULL) - ads->ldap.last_attempt < ADS_RECONNECT_TIME) {
		return ADS_ERROR(LDAP_SERVER_DOWN);
	}

	bp = SMB_STRDUP(bind_path);

	if (!bp) {
		return ADS_ERROR(LDAP_NO_MEMORY);
	}

	*res = NULL;

	/* when binding anonymously, we cannot use the paged search LDAP
	 * control - Guenther */

	if (ads->auth.flags & ADS_AUTH_ANON_BIND) {
		status = ads_do_search(ads, bp, scope, expr, attrs, res);
	} else {
		status = ads_do_search_all_args(ads, bp, scope, expr, attrs, args, res);
	}
	if (ADS_ERR_OK(status)) {
               DEBUG(5,("Search for %s in <%s> gave %d replies\n",
                        expr, bp, ads_count_replies(ads, *res)));
		SAFE_FREE(bp);
		return status;
	}

	while (--count) {

		if (NT_STATUS_EQUAL(ads_ntstatus(status), NT_STATUS_IO_TIMEOUT) && ads->config.ldap_page_size >= 250) {
			int new_page_size = (ads->config.ldap_page_size / 2);
			DEBUG(1, ("Reducing LDAP page size from %d to %d due to IO_TIMEOUT\n",
				  ads->config.ldap_page_size, new_page_size));
			ads->config.ldap_page_size = new_page_size;
		}

		if (*res) 
			ads_msgfree(ads, *res);
		*res = NULL;

		DEBUG(3,("Reopening ads connection to realm '%s' after error %s\n", 
			 ads->config.realm, ads_errstr(status)));

		ads_disconnect(ads);
		status = ads_connect(ads);

		if (!ADS_ERR_OK(status)) {
			DEBUG(1,("ads_search_retry: failed to reconnect (%s)\n",
				 ads_errstr(status)));
			ads_destroy(&ads);
			SAFE_FREE(bp);
			return status;
		}

		*res = NULL;

		/* when binding anonymously, we cannot use the paged search LDAP
		 * control - Guenther */

		if (ads->auth.flags & ADS_AUTH_ANON_BIND) {
			status = ads_do_search(ads, bp, scope, expr, attrs, res);
		} else {
			status = ads_do_search_all_args(ads, bp, scope, expr, attrs, args, res);
		}

		if (ADS_ERR_OK(status)) {
			DEBUG(5,("Search for filter: %s, base: %s gave %d replies\n",
				 expr, bp, ads_count_replies(ads, *res)));
			SAFE_FREE(bp);
			return status;
		}
	}
        SAFE_FREE(bp);

	if (!ADS_ERR_OK(status)) {
		DEBUG(1,("ads reopen failed after error %s\n", 
			 ads_errstr(status)));
	}
	return status;
}

开发者ID:Distrotech，项目名称:samba，代码行数:96，代码来源:ldap_utils.c

注：本文中的ADS_ERROR函数示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ ADS_ERROR_NT函数代码示例发布时间：2022-05-30

C++ ADRENO_DEVICE函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19120|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9970|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8626|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8639|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ ADS_ERROR函数代码示例

示例1: ads_guess_service_principal

示例2: ads_sasl_spnego_rawkrb5_bind

示例3: ads_sasl_bind

示例4: ads_find_printer_on_server

示例5: ads_add_user_acct

示例6: ads_find_user_acct

示例7: ads_generate_service_principal

示例8: cmis_ad_flash_init

示例9: ads_sasl_bind

示例10: ads_do_search_all_sd_flags

示例11: ads_search_retry_sid

示例12: ads_add_group_acct

示例13: ads_guess_target

示例14: bind

示例15: ads_do_search_retry

示例16: bind

示例17: ads_sasl_spnego_bind

示例18: bind

示例19: bind

示例20: ads_do_search_retry_internal

请发表评论

全部评论

上一篇：

下一篇：

theindianappguy/machine_learning_flutter

samaxes/minify-maven-plugin: Combine and

挨打的读音是什么？是āi dǎ还是ái dǎ？

【小程序】小程序的循环遍历

nacika-ins/nanachibot: nanachibot is Rus

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053