• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ ADM_warning函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中ADM_warning函数的典型用法代码示例。如果您正苦于以下问题:C++ ADM_warning函数的具体用法?C++ ADM_warning怎么用?C++ ADM_warning使用的例子?那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了ADM_warning函数的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: ADM_warning

/**
    \fn goToTimeVideo
    \brief Seek video to the given time. Must be an exact time.
*/
bool  ADM_Composer::goToTimeVideo(uint64_t startTime)
{
uint64_t segTime;
uint32_t seg;
    if(false==_segments.convertLinearTimeToSeg(startTime,&seg,&segTime))
    {
        ADM_warning("Cannot find segment for time %"PRIu64" ms\n",startTime/1000);
        return false;
    }
    
    // Try to seek...
    _SEGMENT *s=_segments.getSegment(seg);
    _VIDEOS *v=_segments.getRefVideo(s->_reference);
    if(!s->_reference && !segTime && s->_refStartTimeUs<v->firstFramePts)
    {
        segTime=v->firstFramePts;
        ADM_warning("Fixating start time to %"PRIu64" ms\n",segTime/1000);
    }
    uint64_t to=segTime+s->_refStartTimeUs;
    if(false==seektoTime(s->_reference,to))
    {
            ADM_warning("Cannot seek to beginning of segment %"PRIu32" at  %"PRIu64" ms\n",s,to/1000);
            return false;
    }
    _currentSegment=seg;
    int64_t newTime=(int64_t)v->lastDecodedPts+(int64_t)s->_startTimeUs-(int64_t)s->_refStartTimeUs;
    ADM_info("Seek done, in reference, gone to %"PRIu64" with segment start at %"PRIu64"\n",v->lastDecodedPts,s->_refStartTimeUs);
    SET_CURRENT_PTS(newTime);
    return true;

}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:35,代码来源:ADM_edRender.cpp


示例2: switch

bool AUDMEncoder_DcaEnc::initialize (void)
{
  int chan_config=0;
  switch(wavheader.channels)
  {
    case 1: chan_config=DCAENC_CHANNELS_MONO;break;
    case 2: chan_config=DCAENC_CHANNELS_STEREO;break;
    case 6: chan_config=DCAENC_CHANNELS_3FRONT_2REAR_1OV;break;
    case 5: chan_config=DCAENC_CHANNELS_3FRONT_2REAR;break;
    default:
         ADM_warning("Unsupported channel configuration \n");
         break;
  }
  wavheader.byterate=(config.bitrate*1000)>>3;
  ADM_info("Starting dcaenc with channels=%d, bitrate=%d\n",wavheader.channels,config.bitrate);
  context=dcaenc_create(wavheader.frequency,chan_config,config.bitrate*1000,DCAENC_FLAG_BIGENDIAN   );
  
  if(!context)
  {
      ADM_warning("Cannot create dcaenc context   \n");
      return false;
  }
  inputSize=dcaenc_input_size(context);
  outputSize=dcaenc_output_size(context);
  ADM_info("Converting %d samples to %d bytes\n",inputSize,outputSize);
  return true;
}
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:27,代码来源:audioencoder_dcaenc.cpp


示例3: ADM_warning

/**
 *      \fn switchToNextAudioSegment
 *
 */
bool ADM_edAudioTrackFromVideo::switchToNextAudioSegment(void)
{
        // Try to switch segment
        if(_audioSeg+1>=parent->_segments.getNbSegments()) return false;

        ADM_warning("Switching to segment %"PRIu32"\n",_audioSeg+1);
        _audioSeg++;
        _SEGMENT *seg=parent->_segments.getSegment(_audioSeg);
        ADM_audioStreamTrack *trk=getTrackAtVideoNumber(seg->_reference);
        //
        ADM_Audiocodec *codec=NULL;
        if(trk)
            if(trk->codec)
                codec=trk->codec;
        if(codec)
        {
            codec->resetAfterSeek();
        }
        // Go to beginning of the stream
        if(false==trk->stream->goToTime(seg->_refStartTimeUs))
          {
            ADM_warning("Fail to seek audio to %"PRIu64"ms\n",seg->_refStartTimeUs/1000);
            return false;
          }
        ADM_info("Switched ok to audio segment %"PRIu32", with a ref time=%s\n",
            _audioSeg,ADM_us2plain(seg->_refStartTimeUs));
        return true;

}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:33,代码来源:ADM_edAudioPacket.cpp


示例4: ADM_warning

/**
    \fn displayImage
*/
bool libvaRender::displayImage(ADMImage *pic)
{
    // if input is already a VA surface, no need to reupload it...
    if(pic->refType==ADM_HW_LIBVA)
    {
        ADM_vaSurface *img=(ADM_vaSurface *)pic->refDescriptor.refInstance;
        admLibVA::putX11Surface(img,info.systemWindowId,displayWidth,displayHeight);
        lastSurface=img;
    }else
    {
        if(!mySurface[0] || !mySurface[1])
        {
            ADM_warning("[VARender] No surface\n");
            return false;
        }
        ADM_vaSurface *dest=mySurface[toggle];
        toggle^=1;
        if(false==dest->fromAdmImage(pic))
        {
            ADM_warning("VaRender] Failed to upload pic \n");
            return false;
        }
        admLibVA::putX11Surface(dest,info.systemWindowId,displayWidth,displayHeight);
        lastSurface=dest;
    }
    return true;
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:30,代码来源:GUI_libvaRender.cpp


示例5: ADMImage_To_argbSurface

/**
  \fn ADMImage_To_argbSurface
*/
static bool  ADMImage_To_argbSurface(ADMImage *pic, IDirect3DSurface9 *surface,ADMColorScalerFull *scaler)
{
    D3DLOCKED_RECT     lock;

    if (ADM_FAILED(IDirect3DSurface9_LockRect(surface,&lock, NULL, 0)))
    {
        ADM_warning("D3D Cannot lock surface\n");
        return false;
    }
    // RGB
    uint8_t *src[3];
    uint8_t *dst[3];
    pic->GetReadPlanes(src);
    dst[0]=(uint8_t *)lock.pBits;
    dst[1]=dst[2]=NULL;
    int sourcePitch[3],dstPitch[3];
    pic->GetPitches(sourcePitch);
    dstPitch[0]=lock.Pitch;
    dstPitch[1]=dstPitch[2]=0;
    scaler-> convertPlanes(sourcePitch,dstPitch, src, dst);

    if (ADM_FAILED(IDirect3DSurface9_UnlockRect(surface)))
    {
        ADM_warning("D3D Cannot unlock surface\n");
        return false;
    }
    return true;
}
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:31,代码来源:GUI_dxva2Render.cpp


示例6: ADMImage_To_yv12Surface

/**
  \fn ADMImage_To_yv12Surface
*/
static bool  ADMImage_To_yv12Surface(ADMImage *pic, IDirect3DSurface9 *surface)
{
  D3DLOCKED_RECT     lock;;
  if (ADM_FAILED(IDirect3DSurface9_LockRect(surface,&lock, NULL, 0)))
  {
      ADM_warning("D3D Cannot lock surface\n");
      return false;
  }

  // copy
  uint8_t *dst=(uint8_t *)lock.pBits;
  int  dStride=lock.Pitch;

  int width=pic->GetWidth(PLANAR_Y);
  int height=pic->GetHeight(PLANAR_Y);

  d3dBlit(pic, PLANAR_Y,dst,dStride,width,height);

  dst+=height*dStride;
  d3dBlit(pic, PLANAR_U,dst,dStride>>1,width>>1,height>>1);

  dst+=(height/2)*(dStride/2);
  d3dBlit(pic, PLANAR_V,dst,dStride>>1,width>>1,height>>1);

  if (ADM_FAILED(IDirect3DSurface9_UnlockRect(surface)))
  {
      ADM_warning("D3D Cannot unlock surface\n");
      return false;
  }
  return true;
}
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:34,代码来源:GUI_dxva2Render.cpp


示例7: ADM_warning

/**
  \fn displayImage_argb
  \brief manually do the yv12-> RGB conversion + rescale and the upload to backbuffer
*/
bool dxvaRender::displayImage_argb(ADMImage *pic)
{
  IDirect3DSurface9 *bBuffer;
  // 1 upload to myYV12 surface
  if( ADM_FAILED(IDirect3DDevice9_GetBackBuffer(d3dDevice, 0, 0,
                                            D3DBACKBUFFER_TYPE_MONO,
                                            &bBuffer)))
  {
        ADM_warning("D3D Cannot create backBuffer\n");
        return false;
  }

  if(!ADMImage_To_argbSurface(pic,bBuffer,scaler))
  {
    ADM_warning("Image to argb surface failed\n");
    return false;
  }

  IDirect3DDevice9_BeginScene(d3dDevice);

  IDirect3DDevice9_EndScene(d3dDevice);
  if( ADM_FAILED(IDirect3DDevice9_Present(d3dDevice, &targetRect, 0, 0, 0)))
  {
    ADM_warning("D3D Present failed\n");
  }

  return true;
}
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:32,代码来源:GUI_dxva2Render.cpp


示例8: ADM_warning

/**
    \fn uploadImage
    \brief upload an image to a vdpau surface
*/
bool vdpauVideoFilterDeint::uploadImage(ADMImage *next,VdpVideoSurface surface) 
{
    if(!next) // empty image
    {
        ADM_warning("VdpauDeint:No image to upload\n");
        return true;
    }
    if(surface==VDP_INVALID_HANDLE)
    {
        ADM_error("Surface provided is invalid\n");
        return false;
    }
  // Blit our image to surface
    uint32_t pitches[3];
    uint8_t *planes[3];
    next->GetPitches(pitches);
    next->GetReadPlanes(planes);

    aprintf("Putting image in surface %d\n",(int)surface);
    // Put out stuff in input...
#if VDP_DEBUG
    printf("Uploading image to surface %d\n",surfaceIndex%ADM_NB_SURFACES);
#endif
    if(VDP_STATUS_OK!=admVdpau::surfacePutBits( 
            surface,
            planes,pitches))
    {
        ADM_warning("[Vdpau] video surface : Cannot putbits\n");
        return false;
    }
    return true;
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:36,代码来源:ADM_vidVdpauFilterDeint.cpp


示例9: ADM_vaSurface

bool         ADM_libvaEncoder::setup(void)
{
    int width=getWidth();
    int height=getHeight();
    
    // Allocate VAImage

    for(int i=0;i<VA_ENC_NB_SURFACE;i++)
    {
        vaSurface[i]=new ADM_vaSurface(NULL,width,height);
        if(vaSurface[i]->image) 
        {
            ADM_warning("Cannot allocate surface\n");
            return false;
        }
    }
    context=new ADM_vaEncodingContext();
    if(!context->init(width,height,VA_ENC_NB_SURFACE,vaSurface))
    {
        ADM_warning("Cannot initialize vaEncoder context\n");
        return false;
    }
    encodingBuffer=new ADM_vaEncodingBuffer(context,(width*height*400)/256);
    return true;
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:25,代码来源:ADM_libvaEncoder.cpp


示例10: ADM_warning

/**
    \fn encode
*/
bool         ADM_libvaEncoder::encode (ADMBitstream * out)
{
    uint32_t fn;
    if(source->getNextFrame(&fn,image)==false)
    {
        ADM_warning("[LIBVA] Cannot get next image\n");
        return false;
    }
    if(!vaSurface[0]->fromAdmImage(image))
    {
        ADM_warning("Cannot upload image to surface\n");
        return false;
    }
    //
    if(!context->encode(vaSurface[0],out,encodingBuffer))
    {
        ADM_warning("Error encoding picture\n");
        return false;
    }
    
    out->len=plane;
    out->pts=out->dts=image->Pts;
    out->flags=AVI_KEY_FRAME;
    return true;
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:28,代码来源:ADM_libvaEncoder.cpp


示例11: ADM_warning

/**
        \fn getPacket
*/
uint8_t ADM_audioStreamConstantChunk::getPacket(uint8_t *buffer,uint32_t *size, uint32_t sizeMax,uint32_t *nbSample,uint64_t *dts)
{
    *size=0;
    *nbSample=0;
    if(sizeMax>=chunkSize)
    {
        uint32_t mSize;
        uint64_t mDts;
        if(!access->getPacket(buffer,&mSize,sizeMax,&mDts)) 
        {
                ADM_warning("Cant get packet\n");
                return 0;
        }
        ADM_info("Got packet : chunk=%d size=%d dts=%s\n",chunkSize,mSize,ADM_us2plain(mDts));
        if(!*size)
            *dts=mDts;

        *size+=mSize;
        *nbSample+=samplesPerChunk;
        if(mSize!=chunkSize)
        {
            ADM_warning("Expected chunk of size =%d, got %d\n",chunkSize,mSize);
        }

        buffer+=mSize;
        sizeMax-=mSize;
     }
     if(!*size) return 0;
     return 1;
}
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:33,代码来源:ADM_audioStreamConstantChunk.cpp


示例12: ADM_info

/**
    \fn init
*/
bool libvaRender::init( GUI_WindowInfo * window, uint32_t w, uint32_t h,renderZoom zoom)
{
    ADM_info("[libva]Xv start\n");
    info=*window;
    if(admLibVA::isOperationnal()==false)
    {
        ADM_warning("[libva] Not operationnal\n");
        return false;
    }
    for(int i=0;i<2;i++)
    {
        VASurfaceID surface=admLibVA::allocateSurface(w,h);
        if(surface==VA_INVALID)
        {
             ADM_warning("[libva] cannot allocate surface\n");
            return false;
        }

        mySurface[i]=new ADM_vaSurface(NULL,w,h);
        mySurface[i]->surface=surface;
    }    
    
    baseInit(w,h,zoom);
    return true;
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:28,代码来源:GUI_libvaRender.cpp


示例13: xdebug

bool ADM_latm2aac::pushData(int incomingLen,uint8_t *inData,uint64_t dts)
{
    // Lookup sync
    uint8_t *end=inData+incomingLen;
    uint8_t *start=inData;
    xdebug("Pushing data %d bytes\n",incomingLen);
    while(start<end)
    {
        int key=(start[0]<<8)+start[1];
        if((key & 0xffe0)!=0x56e0)
        {
            ADM_warning("Sync lost\n");
            return true;
        }
        uint32_t len=start[2]+((key & 0x1f)<<8);
        start+=3;
        if(start+len>end)
        {
            ADM_warning("Not enough data, need %d, got %d\n",len,(int)(end-start));
            return true;
        }
        xdebug("Found LATM : size %d\n",len);
        demuxLatm(dts,start,len);
        dts=ADM_NO_PTS;
        // LATM demux
        start+=len;
    }
    xdebug("-- end of this LOAS frame --\n");
    return true;
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:30,代码来源:ADM_aacLatm.cpp


示例14: while

/**
        \fn fillAudio
        \brief Put audio datas until targetDts is reached
*/
bool muxerAvi::fillAudio(uint64_t targetDts)
{
// Now send audio until they all have DTS > lastVideoDts+increment
            for(int audioIndex=0;audioIndex<nbAStreams;audioIndex++)
            {
                ADM_audioStream*a=aStreams[audioIndex];
                uint32_t fq=a->getInfo()->frequency;
                int nb=0;
                audioClock *clk=clocks[audioIndex];
                aviAudioPacket *aPacket=audioPackets+audioIndex;
                if(true==aPacket->eos) return true;
                while(1)
                {
                    if(false==aPacket->present)
                    {
                        if(!a->getPacket(aPacket->buffer,
                                         &(aPacket->sizeInBytes),
                                         AUDIO_BUFFER_SIZE,
                                         &(aPacket->nbSamples),
                                         &(aPacket->dts)))
                        {
                                ADM_warning("Cannot get audio packet for stream %d\n",audioIndex);
                                aPacket->eos=true;
                                break;
                        }
                            if(aPacket->dts!=ADM_NO_PTS) 
                            {
                                aPacket->dts+=audioDelay;
                                aPacket->dts-=firstPacketOffset;
                            }
                            aprintf("[Audio] Packet size %"PRIu32" sample:%"PRIu32" dts:%"PRIu64" target :%"PRIu64"\n",
                                            aPacket->sizeInBytes,aPacket->nbSamples,aPacket->dts,targetDts);
                            if(aPacket->dts!=ADM_NO_PTS)
                                if( abs(aPacket->dts-clk->getTimeUs())>32000)
                                {
                                    ADM_warning("[AviMuxer] Audio skew!\n");
                                    clk->setTimeUs(aPacket->dts);
#warning FIXME add padding
                                }
                            aPacket->present=true;
                    }
                    // We now have a packet stored
                    aprintf("Audio packet dts =%s\n",ADM_us2plain(aPacket->dts));
                    if(aPacket->dts!=ADM_NO_PTS)
                        if(aPacket->dts>targetDts) 
                        {
                            aprintf("In the future..\n");
                            break; // this one is in the future
                        }
                    nb=writter.saveAudioFrame(audioIndex,aPacket->sizeInBytes,aPacket->buffer) ;
                    encoding->pushAudioFrame(aPacket->sizeInBytes);
                    aprintf("writting audio packet\n");
                    clk->advanceBySample(aPacket->nbSamples);
                    aPacket->present=false;
                    //printf("%u vs %u\n",audioDts/1000,(lastVideoDts+videoIncrement)/1000);
                }
            }

            return true;
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:64,代码来源:muxerAvi.cpp


示例15: ADM_info

/**
    \fn removeChunk
    \brief
*/
bool        ADM_EditorSegment::removeChunk(uint64_t from, uint64_t to)
{
    uint32_t startSeg,endSeg;
    uint64_t startOffset,endOffset;

    ADM_info("Cutting from %"PRIu64" to %"PRIu64" ms\n",from/1000,to/1000);
    dump();
    if(false==convertLinearTimeToSeg( from,&startSeg,&startOffset))
    {
        ADM_warning("Cannot get starting point (%"PRIu64" ms\n",from/1000);
        return false;
    }
    if(false==convertLinearTimeToSeg( to,&endSeg,&endOffset))
    {
        ADM_warning("Cannot get starting point (%"PRIu64" ms\n",from/1000);
        return false;
    }

    ADM_info("Start, seg %"PRIu32" Offset :%"PRIu64" ms\n",startSeg,startOffset);
    ADM_info("End  , seg %"PRIu32" Offset :%"PRIu64" ms\n",endSeg,endOffset);
    ListOfSegments tmp=segments;
    

    if(startSeg==endSeg)
    {
        // Split the seg int two..
        segments.insert(segments.begin()+startSeg+1,*getSegment(startSeg));
        endSeg=startSeg+1;

    }
    _SEGMENT *first=getSegment(startSeg);
      // Span over several seg...
    // 1- shorten the start segment..

    first->_durationUs=startOffset;

    // 3- Shorten last segment
    _SEGMENT *last=getSegment(endSeg);
    last->_refStartTimeUs+=endOffset;
    last->_durationUs-=endOffset;
    // 2- Kill the segment in between
    for(int i=startSeg+1;i<endSeg;i++)
    {
        segments.erase(segments.begin()+startSeg+1);
    }
    updateStartTime();
    removeEmptySegments();
    if(isEmpty())
    {
        GUI_Error_HIG(QT_TRANSLATE_NOOP("adm","Error"),QT_TRANSLATE_NOOP("adm","You cannot remove *all* the video\n"));
        segments=tmp;
        updateStartTime();
        return false;

    }
    undoSegments.push_back(tmp);
    dump();
    return true;
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:63,代码来源:ADM_segment.cpp


示例16: ADM_info

/**
    \fn checkCutsAreOnIntra
    \brief In copy mode, if the cuts are not on intra we will run into trouble :
            * We include skipped ref frames: we will have DTS going back error
            * We skip them, we have borked video at cut points due to missing ref framesz
    \return true if everything ok
*/
bool ADM_Composer::checkCutsAreOnIntra(void)
{
    bool fail=false;
    int nbSeg=_segments.getNbSegments();

    ADMCompressedImage img;
    uint8_t *buffer=new uint8_t[1920*1080*3];
    img.data=buffer;
    ADM_info("Checking cuts start on keyframe..\n");
    for(int i=0; i<nbSeg; i++)
    {
        _SEGMENT *seg=_segments.getSegment(i);
        _VIDEOS *vid=_segments.getRefVideo(seg->_reference);
        vidHeader *demuxer=vid->_aviheader;

        if(false==switchToSegment(i,true))
        {
            fail=true;
            break;
        }
        if(false==demuxer->getFrame (vid->lastSentFrame,&img))
        {
            ADM_info("Cannot get 1st frame of segment %d\n",i);
            fail=true;
            break;
        }
        if(!img.flags & AVI_KEY_FRAME)
        {
            ADM_warning("Segment %d does not start on a keyframe (%s)\n",i,ADM_us2plain(img.demuxerPts));
            fail=true;
            break;
        }
        // After a seg switch we are at the keyframe before or equal to where we want to go
        // if the dts do not match, it means we went back too much
        // When re-encoding, it's not a problem, it is when copying.
        ADM_info("seg:%d refDTS=%"PRIu64"\n",seg->_reference,seg->_refStartDts);
        ADM_info("seg:%d imgDTS=%"PRIu64"\n",seg->_reference,img.demuxerDts);
        if(!seg->_refStartDts && !seg->_reference)
        {
            ADM_info("Ignoring first seg (unreliable DTS)\n");

        } else if(img.demuxerDts!=ADM_NO_PTS && seg->_refStartDts!=ADM_NO_PTS &&
                  img.demuxerDts!=seg->_refStartDts)
        {
            ADM_warning("Segment %d does not start on a known DTS (%s)\n",i,ADM_us2plain(img.demuxerPts));
            ADM_warning("expected (%s)\n",ADM_us2plain(seg->_refStartDts));
            fail=true;
            break;
        }
        ADM_info("Segment %d ok\n",i);
    }
    delete [] buffer;
    buffer=NULL;
    if(fail) return false;
    return true;
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:63,代码来源:ADM_edVideoCopy.cpp


示例17: while

/**
        \fn getPacket
*/
uint8_t ADM_audioStreamDCA::getPacket(uint8_t *obuffer,uint32_t *osize, uint32_t sizeMax,uint32_t *nbSample,uint64_t *dts)
{
#define ADM_LOOK_AHEAD DTS_HEADER_SIZE // Need 10 bytes...
uint8_t data[ADM_LOOK_AHEAD];
uint32_t offset;
ADM_DCA_INFO info;
    while(1)
    {
        // Do we have sync ?
        if(needBytes(ADM_LOOK_AHEAD)==false) 
        {
            ADM_warning("DCA: Not sync found in buffer\n");
            return false;
        }
            
        // Peek
        peek(ADM_LOOK_AHEAD,data);
        // Search start seq
        if(buffer[start]!=0x7F || buffer[start+1]!=0xFE)
        {
            read8();
            continue;
        }
        if(buffer[start+2]!=0x80 || buffer[start+3]!=0x1)
        {
            read8();
            read8();
            continue;
        }

        if(false== ADM_DCAGetInfo(buffer+start, limit-start,&info,&offset))
        {
            read8();
            read8();
            read8();
            read8();
            continue;
        }
        ADM_assert(info.frameSizeInBytes<=sizeMax);
        if(needBytes(info.frameSizeInBytes)==false)
        {
            ADM_warning("DCA: Not enough data\n");
            return false;
        }
        *osize=info.frameSizeInBytes;
        read(*osize,obuffer);
        *nbSample=info.samples;
        *dts=lastDts;
        advanceDtsBySample(*nbSample);
        return 1;

    }
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:56,代码来源:ADM_audioStreamDCA.cpp


示例18: xiphExtraData2Adm

bool xiphExtraData2Adm(uint8_t *extraData, int extraLen,uint8_t **newExtra,int *newExtraLen)    
{    
  *newExtra=NULL;
  *newExtraLen=0;
  uint8_t *oldata=extraData;
  int oldlen=extraLen;
  int len1,len2,len3;
  uint8_t *head;
      if(*oldata!=2) // 3 packets -1 = 2
      {
          ADM_warning("[MKV] weird vorbis audio, expect problems\n");
          return false;
      }
      // First packet length
      head=oldata+1;

      len1=xypheLacingRead(&head);
      len2=xypheLacingRead(&head);   
      
      int consumed=head-oldata;      
      len3=oldlen-consumed; // left in extradata
      
      if(len3<0)
      {
        ADM_warning("Error in vorbis header, len3 too small %d %d / %d\n",len1,len2,len3);
        return false;
      }
      len3-=(len1+len2);
      ADM_info("Found packets len : %d- %d- %d, total size %d\n",len1,len2,len3,oldlen);
      // Now build our own packet...
      // Allocate uint32 for alignment purpose
      
      uint32_t *buffer=new uint32_t[3+(4+len1+len2+len3)/4];        
      uint32_t nwlen=len1+len2+len3+sizeof(uint32_t)*3; // in bytes
      
      uint8_t *cp=(uint8_t *)(buffer+3); // data part
      memcpy(cp,head,len1);
      cp+=len1;head+=len1;
      
      memcpy(cp,head,len2);
      cp+=len2;head+=len2;
      
      memcpy(cp,head,len3);
      
      buffer[0]=len1;
      buffer[1]=len2;
      buffer[2]=len3;
      // Destroy old datas
      *newExtra=(uint8_t *)(buffer);
      *newExtraLen=nwlen;
  return true;
}    
开发者ID:TotalCaesar659,项目名称:avidemux2,代码行数:52,代码来源:ADM_audioXiphUtils.cpp


示例19: probeCuda

/**
 * 
 * @param avctx
 * @return 
 */
static bool  probeCuda()
{
   
    ADM_info( "Probing cuda\n");
    if(!loadCuda())
    {
        ADM_warning("Cannot load cuda\n");
        return false;
    }
    ADM_warning("Cuda loaded, probing..\n");
    if(!cudaCall(init(0)))
        return false;

    int deviceCount=0;
    if(!cudaCall(getDeviceCount(&deviceCount)))
        return false;

    if (!deviceCount) 
    {
        ADM_warning( "No Cuda device available\n");
        return false;
    }

    ADM_info( "found %d CUDA devices \n", deviceCount);

    for (int i = 0; i < deviceCount; ++i) 
    {
        CUdevice dev;
        char chipName[128];
        int major,minor,ver;
        
        cudaAbortOnFail(getDevice(&dev,i));
        cudaAbortOnFail(getDeviceName(chipName,sizeof(chipName),dev));
        cudaAbortOnFail(getDeviceCapabilities(&major,&minor,dev));
        ver = (major << 4) | minor;
        ADM_info("Found  chip, GPU %s, SM %d.d",chipName,major,minor);
        if(ver>=0x30)
        {
            ADM_info("   this chip has nvenc");
            if(!nvEncAvailable)
            {
                nvEncAvailable=true;
                selectedDevice=dev;
            }
        }
    }

    return nvEncAvailable;
abortCudaProbe:
    return false;
            
}
开发者ID:AlexanderStohr,项目名称:avidemux2,代码行数:57,代码来源:nvEnc_utils.cpp


示例20: time

/**
    \fn GoToIntraTime_noDecoding
    \brief Go to an intra at time time (exact) but do not decode frames
    \return true on success, false on error
*/
bool        ADM_Composer::GoToIntraTime_noDecoding(uint64_t time,uint32_t *toframe)
{
    uint32_t s;
    uint64_t segTime;
    // Search the seg ..;
    if(false==_segments.convertLinearTimeToSeg(time,&s,&segTime))
    {
        ADM_warning("GoToIntraTime failed!\n");
        return false;
    }
    _SEGMENT *seg=_segments.getSegment(s);
    ADM_assert(seg);
    _VIDEOS *ref=_segments.getRefVideo(seg->_reference);
    ADM_assert(ref);
    //

    uint64_t refTime=seg->_refStartTimeUs+segTime;

    uint32_t frame=_segments.intraTimeToFrame(seg->_reference,refTime);    
    if(s!=_currentSegment)
    {
        if(false==switchToSegment(s))
        {
            ADM_warning("Cannot go to segment %"PRIu32"\n",s);
            return false;
        }
    }
    if(toframe) *toframe=frame;
    ref->lastSentFrame=frame; // For copy
    // Initialize _nextFrameDts, in fact next DTS
    uint64_t pts,dts;
    ref->_aviheader->getPtsDts(frame,&pts,&dts);
    if(dts==ADM_NO_PTS)
    {
        if(pts==ADM_NO_PTS) 
        {
            ADM_warning("No PTS nor DTS, cannot set start DTS");
            return false; // Fixme we can still guess DTS
        }
        // convert to linear time
        _segments.dtsFromPts(seg->_reference,pts,&dts);
    }
        time=(int64_t)dts;
        time-=seg->_refStartTimeUs;
        time+=seg->_startTimeUs;
        dts=time;
    
    _nextFrameDts=dts;
    seg->_dropBframes=1;
    return true;
}
开发者ID:BackupTheBerlios,项目名称:avidemux-svn,代码行数:56,代码来源:ADM_edRender.cpp



注:本文中的ADM_warning函数示例整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ ADRENO_CONTEXT函数代码示例发布时间:2022-05-30
下一篇:
C++ ADM_info函数代码示例发布时间:2022-05-30
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap