C++ kio::TransferJob类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中kio::TransferJob类的典型用法代码示例。如果您正苦于以下问题：C++ TransferJob类的具体用法？C++ TransferJob怎么用？C++ TransferJob使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了TransferJob类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: listSubCategories

void SmugTalker::listSubCategories(int categoryID)
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    KUrl url(m_apiURL);
    url.addQueryItem("method", "smugmug.subcategories.get");
    url.addQueryItem("SessionID", m_sessionID);
    url.addQueryItem("CategoryID", QString::number(categoryID));

    QByteArray tmp;
    KIO::TransferJob* job = KIO::http_post(url, tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = SMUG_LISTSUBCATEGORIES;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:UIKit0，项目名称:digikam-2012-kipi-plugins，代码行数:30，代码来源:smugtalker.cpp

示例2: QString

        KJob *UPnPRouter::sendSoapQuery(const QString & query,const QString & soapact,const QString & controlurl)
        {
            // if port is not set, 0 will be returned
            // thanks to Diego R. Brogna for spotting this bug
            if (location.port()<=0)
                location.setPort(80);

            QUrl address;

            address.setScheme(QString("http"));
            address.setHost(location.host());
            address.setPort(location.port());
            address.setPath(controlurl);

            KIO::TransferJob *req = KIO::http_post( address, query.toLatin1(), KIO::HideProgressInfo );

            req->addMetaData("content-type", QString("text/xml"));
            req->addMetaData("UserAgent", QString("Konversation UPnP"));
            req->addMetaData("customHTTPHeader", QString("SOAPAction: ") + soapact);

            soap_data_out[req] = QByteArray();
            soap_data_in[req]  = QByteArray();

            connect(req, &KIO::TransferJob::data, this, &UPnPRouter::recvSoapData);
            connect(req, &KIO::TransferJob::dataReq, this, &UPnPRouter::sendSoapData);

            connect(req, &KIO::TransferJob::result, this, &UPnPRouter::onRequestFinished);

            return req;
        }

开发者ID:KDE，项目名称:konversation，代码行数:30，代码来源:upnprouter.cpp

示例3: logout

void SmugTalker::logout()
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    KUrl url(m_apiURL);
    url.addQueryItem("method", "smugmug.logout");
    url.addQueryItem("SessionID", m_sessionID);

    QByteArray tmp;
    KIO::TransferJob* job = KIO::http_post(url, tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    m_state = SMUG_LOGOUT;
    m_job   = job;
    m_buffer.resize(0);

    // logout is synchronous call
    job->exec();
    slotResult(job);
}

开发者ID:UIKit0，项目名称:digikam-2012-kipi-plugins，代码行数:30，代码来源:smugtalker.cpp

示例4: getUploadPermission

/**
 * Request upload permission using OAuth
 *
 * TODO (Dirk) maybe this can go or be merged with a re-authentication function.
 */
void FbTalker::getUploadPermission()
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);
    if (m_loginInProgress)
        emit signalLoginProgress(8);

    QMap<QString, QString> args;
    args["access_token"] = m_accessToken;
    args["ext_perm"]     = "photo_upload";

    QByteArray tmp(getCallString(args).toUtf8());
    KIO::TransferJob* job = KIO::http_post(KUrl(m_apiURL,"users.hasAppPermission"), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = FB_GETUPLOADPERM;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:tejastank，项目名称:kipi-plugins，代码行数:36，代码来源:fbtalker.cpp

示例5: listAlbums

void SmugTalker::listAlbums(const QString& nickName)
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    KUrl url(m_apiURL);
    url.addQueryItem("method", "smugmug.albums.get");
    url.addQueryItem("SessionID", m_sessionID);
    url.addQueryItem("Heavy", "1");
    if (!nickName.isEmpty())
        url.addQueryItem("NickName", nickName);

    QByteArray tmp;
    KIO::TransferJob* job = KIO::http_post(url, tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = SMUG_LISTALBUMS;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:UIKit0，项目名称:digikam-2012-kipi-plugins，代码行数:32，代码来源:smugtalker.cpp

示例6: listFriends

void FbTalker::listFriends()
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    QMap<QString, QString> args;
    args["access_token"] = m_accessToken;

    QByteArray tmp(getCallString(args).toUtf8());
    KIO::TransferJob* job = KIO::http_post(KUrl(m_apiURL,"friends.get"), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = FB_LISTFRIENDS;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:tejastank，项目名称:kipi-plugins，代码行数:28，代码来源:fbtalker.cpp

示例7: logout

void FbTalker::logout()
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    QMap<QString, QString> args;
    args["access_token"] = m_accessToken;

    QByteArray tmp(getCallString(args).toUtf8());
    KIO::TransferJob* job = KIO::http_post(KUrl(m_apiURL,"auth.expireSession"), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    m_state = FB_LOGOUT;
    m_job   = job;
    m_buffer.resize(0);

    // logout is synchronous call
    job->exec();
    slotResult(job);
}

开发者ID:tejastank，项目名称:kipi-plugins，代码行数:29，代码来源:fbtalker.cpp

示例8: listPhotos

void FbTalker::listPhotos(long long userID, const QString &albumID)
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    QMap<QString, QString> args;
    args["access_token"] = m_accessToken;
    if (!albumID.isEmpty())
        args["aid"]      = albumID;
    else if (userID != 0)
        args["subj_id"]  = QString::number(userID);
    else
        args["subj_id"]  = QString::number(m_user.id);

    QByteArray tmp(getCallString(args).toUtf8());
    KIO::TransferJob* job = KIO::http_post(KUrl(m_apiURL,"photos.get"), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = FB_LISTPHOTOS;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:tejastank，项目名称:kipi-plugins，代码行数:34，代码来源:fbtalker.cpp

示例9: slotLocalGotResult

void DccTransferRecv::slotLocalGotResult( KIO::Job* job )
{
    kdDebug() << "DccTransferRecv::slotLocalGotResult() [BEGIN]" << endl;

    KIO::TransferJob* transferJob = static_cast<KIO::TransferJob*>( job );
    disconnect( transferJob, 0, 0, 0 );

    switch ( transferJob->error() )
    {
        case 0:                                   // no error
            kdDebug() << "DccTransferRecv::slotLocalGotResult(): job->error() returned 0." << endl
                << "DccTransferRecv::slotLocalGotResult(): Why was I called in spite of no error?" << endl;
            break;
        case KIO::ERR_FILE_ALREADY_EXIST:
            askAndPrepareLocalKio( i18n( "<b>The file already exists.</b><br>"
                "%1<br>" )
                .arg( m_fileURL.prettyURL() ),
                DccResumeDialog::RA_Overwrite | DccResumeDialog::RA_Rename | DccResumeDialog::RA_Cancel,
                DccResumeDialog::RA_Overwrite );
            break;
        default:
            askAndPrepareLocalKio( i18n( "<b>Could not open the file.<br>"
                "Error: %1</b><br>"
                "%2<br>" )
                .arg( transferJob->error() )
                .arg( m_fileURL.prettyURL() ),
                DccResumeDialog::RA_Rename | DccResumeDialog::RA_Cancel,
                DccResumeDialog::RA_Rename );
    }

    kdDebug() << "DccTransferRecv::slotLocalGotResult() [END]" << endl;
}

开发者ID:，项目名称:，代码行数:32，代码来源:

示例10: putAndGet

void JobRemoteTest::putAndGet()
{
    const QString filePath = remoteTmpDir() + "putAndGetFile";
    KUrl u(filePath);
    KIO::TransferJob* job = KIO::put( u, 0600, KIO::Overwrite | KIO::HideProgressInfo );
    QDateTime mtime = QDateTime::currentDateTime().addSecs( -30 ); // 30 seconds ago
    mtime.setTime_t(mtime.toTime_t()); // hack for losing the milliseconds
    job->setModificationTime(mtime);
    job->setUiDelegate( 0 );
    connect( job, SIGNAL( result(KJob*) ),
            this, SLOT( slotResult(KJob*) ) );
    connect( job, SIGNAL(dataReq(KIO::Job*, QByteArray&)),
             this, SLOT(slotDataReq(KIO::Job*, QByteArray&)) );
    m_result = -1;
    m_dataReqCount = 0;
    enterLoop();
    QVERIFY( m_result == 0 ); // no error

    m_result = -1;

    KIO::StoredTransferJob* getJob = KIO::storedGet( u, KIO::NoReload, KIO::HideProgressInfo );
    getJob->setUiDelegate( 0 );
    connect( getJob, SIGNAL( result( KJob* ) ),
            this, SLOT( slotGetResult( KJob* ) ) );
    enterLoop();
    QCOMPARE( m_result, 0 ); // no error
    QCOMPARE( m_data, QByteArray("This is a test for KIO::put()\n") );
    //QCOMPARE( m_data.size(), 11 );
}

开发者ID:vasi，项目名称:kdelibs，代码行数:29，代码来源:jobremotetest.cpp

示例11: onFinishedReadingFile

void ShareProvider::onFinishedReadingFile(KIO::Job* job, const QByteArray& data)
{
    job->disconnect(this);
    qobject_cast<KIO::FileJob *>(job)->close();

    if (data.length() == 0) {
        Q_EMIT finishedError(this, i18n("It was not possible to read the selected file"));
        return;
    }
    
    d->m_data.clear();

    AbstractSharer *sharer = d->getSharer();
    if (sharer) {
        KUrl sharerUrl = sharer->url();
        if (!sharerUrl.isValid()) {
            Q_EMIT finishedError(this, i18n("Service Url is not valid"));
            return;
        }
        KIO::TransferJob *tJob = KIO::http_post(sharer->url(), sharer->postBody(data), KIO::HideProgressInfo);
        tJob->setMetaData(sharer->headers());
        connect(tJob, SIGNAL(data(KIO::Job*,QByteArray)),
                this, SLOT(onTransferJobDataReceived(KIO::Job*,QByteArray)));
        connect(tJob, SIGNAL(result(KJob*)), this, SLOT(onTransferJobResultReceived(KJob*)));

    }
}

开发者ID:R4md4c，项目名称:image-sharer，代码行数:27，代码来源:shareprovider.cpp

示例12: onTransferJobResultReceived

void ShareProvider::onTransferJobResultReceived(KJob* job)
{
    if (d->m_data.size() == 0) {
        Q_EMIT finishedError(this, i18n("Service was not available"));
        return;
    }

    KIO::TransferJob *tfJob = qobject_cast<KIO::TransferJob*>(job);
    if (tfJob) {
        QString mimeType = tfJob->mimetype();
        AbstractSharer *sharer = d->getSharer();

        if (sharer) {
            sharer->parseResponse(d->m_data);
            if (tfJob->isErrorPage() || sharer->hasError()) {
                QString errorMessage = sharer->errorMessage();
                if (!errorMessage.isEmpty()) {
                    Q_EMIT finishedError(this, errorMessage);
                } else {
                    Q_EMIT finishedError(this, tfJob->errorString());
                }
            } else {
                Q_EMIT finishedSuccess(this, sharer->imageUrl().url());
            }
        }
    }
}

开发者ID:R4md4c，项目名称:image-sharer，代码行数:27，代码来源:shareprovider.cpp

示例13: fetchFinished

void HttpContainer::fetchFinished(KJob *job)
{
    if (!job->error()) {
        // We now set the data on the source with the retrieved data and some
        // additional stats. Note that we don't include the source name, as that
        // is implied as this object *is* the DataContainer. setData is called
        // with just key/value pairs.
        setData("Contents", m_data);
        setData("Size", job->processedAmount(KJob::Bytes));

        // Since we only create TransferJobs, it's safe to just static_cast here.
        // In many real-world situations, this isn't the safest thing to do and a
        // qobject_cast with a test on the result is often safer and cleaner.
        KIO::TransferJob *tjob = static_cast<KIO::TransferJob *>(job);
        setData("Error Page", tjob->isErrorPage());
        setData("Mimetype", tjob->mimetype());

        // Let DataContainer know we have data that needs storing
        setNeedsToBeStored(true);

        // Notify DataContainer that now is a good time to check to see that
        // data has been updated. This will cause visualizations to be updated.
        checkForUpdate();

        // Clean up behind ourselves so there isn't unecessary memory usage
        m_data.clear();
    }
}

开发者ID:KDE，项目名称:plasma-framework，代码行数:28，代码来源:httpContainer.cpp

示例14: exchangeSession

/**
 * upgrade session key to OAuth
 *
 * This method (or step) can be removed after June 2012 (a year after its
 * implementation), since it is only a convenience method for those people
 * who just upgraded and have an active session using the old authentication.
 */
void FbTalker::exchangeSession(const QString& sessionKey)
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);
    emit signalLoginProgress(1, 9, i18n("Upgrading to OAuth..."));

    QMap<QString, QString> args;
    args["client_id"]     = m_appID;
    args["client_secret"] = m_secretKey;
    args["sessions"]      = sessionKey;

    QByteArray tmp(getCallString(args).toUtf8());
    KIO::TransferJob* job = KIO::http_post(KUrl("https://graph.facebook.com/oauth/exchange_sessions"), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = FB_EXCHANGESESSION;
    m_job   = job;
    m_buffer.resize(0);
}

开发者ID:tejastank，项目名称:kipi-plugins，代码行数:38，代码来源:fbtalker.cpp

示例15: checkRegistrationCode

void ImageshackTalker::checkRegistrationCode()
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }

    emit signalBusy(true);
    emit signalLoginInProgress(2, 4, i18n("Checking the web server"));

    QString args = "login=";
    args.append(m_imageshack->registrationCode());
    args.append("&xml=yes");

    QByteArray tmp = args.toUtf8();
    KIO::TransferJob* job = KIO::http_post(KUrl(m_loginApiUrl), tmp, KIO::HideProgressInfo);
    job->addMetaData("UserAgent", m_userAgent);
    job->addMetaData("content-type",
                     "Content-Type: application/x-www-form-urlencoded");

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = IMGHCK_CHECKREGCODE;
    m_job   = job;
    m_buffer.resize(0);

}

开发者ID:NathanDM，项目名称:kipi-plugins，代码行数:32，代码来源:imageshacktalker.cpp

示例16: _k_contentTypeCheckFailed

 void _k_contentTypeCheckFailed(KJob* job)
 {
     KIO::TransferJob* tJob = qobject_cast<KIO::TransferJob*>(job);
     // On error simply call downloadResource which will probably fail as well.
     if (tJob && tJob->error()) {
         (void)downloadResource(tJob->url(), QString(), window, tJob->metaData());
     }
 }

开发者ID:，项目名称:，代码行数:8，代码来源:

示例17: addPhoto

bool SmugTalker::addPhoto(const QString& imgPath, int albumID,
                          const QString& caption)
{
    if (m_job)
    {
        m_job->kill();
        m_job = 0;
    }
    emit signalBusy(true);

    QString imgName = QFileInfo(imgPath).fileName();
    // load temporary image to buffer
    QFile imgFile(imgPath);
    if (!imgFile.open(QIODevice::ReadOnly))
    {
        emit signalBusy(false);
        return false;
    }
    long long imgSize = imgFile.size();
    QByteArray imgData = imgFile.readAll();
    imgFile.close();
    KMD5 imgMD5(imgData);

    MPForm form;

    form.addPair("ByteCount", QString::number(imgSize));
    form.addPair("MD5Sum", QString(imgMD5.hexDigest()));
    form.addPair("AlbumID", QString::number(albumID));
    form.addPair("ResponseType", "REST");
    if (!caption.isEmpty())
        form.addPair("Caption", caption);

    if (!form.addFile(imgName, imgPath))
        return false;

    form.finish();

    QString customHdr;
    KUrl url("http://upload.smugmug.com/photos/xmladd.mg");
    KIO::TransferJob *job = KIO::http_post(url, form.formData(),
            KIO::HideProgressInfo);
    job->addMetaData("content-type", form.contentType());
    job->addMetaData("UserAgent", m_userAgent);
    customHdr += "X-Smug-SessionID: " + m_sessionID + "\r\n";
    customHdr += "X-Smug-Version: " + m_apiVersion + "\r\n";
    job->addMetaData("customHTTPHeader", customHdr);

    connect(job, SIGNAL(data(KIO::Job*,QByteArray)),
            this, SLOT(data(KIO::Job*,QByteArray)));

    connect(job, SIGNAL(result(KJob*)),
            this, SLOT(slotResult(KJob*)));

    m_state = SMUG_ADDPHOTO;
    m_job   = job;
    m_buffer.resize(0);
    return true;
}

开发者ID:UIKit0，项目名称:digikam-2012-kipi-plugins，代码行数:58，代码来源:smugtalker.cpp

示例18: start

void FreeBusyDownloadJob::start()
{
  KIO::TransferJob *job = KIO::get( mUrl, KIO::NoReload, KIO::HideProgressInfo );

  job->ui()->setWindow( mParent );

  connect( job, SIGNAL(result(KJob*)), SLOT(slotResult(KJob*)) );
  connect( job, SIGNAL(data(KIO::Job*,QByteArray)), SLOT(slotData(KIO::Job*,QByteArray)) );
}

开发者ID:lenggi，项目名称:kcalcore，代码行数:9，代码来源:freebusydownloadjob_p.cpp

示例19: revokeAccess

void Resource::revokeAccess(const QString &id, const QString &name, const QString &password)
{
    QUrl url = baseUrl;
    url.setPath(url.path() + "/authorizations/" + id);
    KIO::TransferJob *job = KIO::http_delete(url, KIO::HideProgressInfo);
    job->addMetaData("customHTTPHeader", "Authorization: Basic " + QString (name + ':' + password).toUtf8().toBase64());
    /* And we don't care if it's successful ;) */
    job->start();
}

开发者ID:salamanderrake，项目名称:KDevelop，代码行数:9，代码来源:ghresource.cpp

示例20:

KIO::TransferJob * Resource::getTransferJob(const QString &uri, const QString &token) const
{
    QUrl url = baseUrl;
    url = url.adjusted(QUrl::StripTrailingSlash);
    url.setPath(url.path() + '/' + uri);
    KIO::TransferJob *job = KIO::get(url, KIO::Reload, KIO::HideProgressInfo);
    if (!token.isEmpty())
        job->addMetaData("customHTTPHeader", "Authorization: token " + token);
    return job;
}

开发者ID:salamanderrake，项目名称:KDevelop，代码行数:10，代码来源:ghresource.cpp

注：本文中的kio::TransferJob类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。