C++ detail::base_factory类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中detail::base_factory类的典型用法代码示例。如果您正苦于以下问题：C++ base_factory类的具体用法？C++ base_factory怎么用？C++ base_factory使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了base_factory类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: gn_sinu_init

 inline void gn_sinu_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("gn_sinu", new gn_sinu_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("sinu", new sinu_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("eck6", new eck6_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("mbtfps", new mbtfps_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:VTREEM，项目名称:IFCPlusPlus_old，代码行数:7，代码来源:gn_sinu.hpp

示例2: latlong_init

 inline void latlong_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("lonlat", new lonlat_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("latlon", new latlon_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("latlong", new latlong_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("longlat", new longlat_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:AlexMioMio，项目名称:boost，代码行数:7，代码来源:latlong.hpp

示例3: sts_init

 inline void sts_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("kav5", new kav5_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("qua_aut", new qua_aut_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("mbt_s", new mbt_s_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("fouc", new fouc_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:morsya，项目名称:omim，代码行数:7，代码来源:sts.hpp

示例4: eck3_init

 inline void eck3_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("eck3", new eck3_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("putp1", new putp1_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("wag6", new wag6_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("kav7", new kav7_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:Belial2010，项目名称:Pedestrian-Detection-Project，代码行数:7，代码来源:eck3.hpp

示例5: mbtfpq_init

 inline void mbtfpq_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("mbtfpq", new mbtfpq_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:Jopie64，项目名称:boost-svn，代码行数:4，代码来源:mbtfpq.hpp

示例6: eqdc_init

 inline void eqdc_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("eqdc", new eqdc_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:4x4falcon，项目名称:fosm-merkaartor，代码行数:4，代码来源:eqdc.hpp

示例7: bonne_init

 inline void bonne_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("bonne", new bonne_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:4x4falcon，项目名称:fosm-merkaartor，代码行数:4，代码来源:bonne.hpp

示例8: nell_init

 inline void nell_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("nell", new nell_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:AlexMioMio，项目名称:boost，代码行数:4，代码来源:nell.hpp

示例9: moll_init

 inline void moll_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("moll", new moll_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("wag4", new wag4_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("wag5", new wag5_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:morsya，项目名称:omim，代码行数:6，代码来源:moll.hpp

示例10: putp4p_init

inline void putp4p_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
{
    factory.add_to_factory("putp4p", new putp4p_entry<Geographic, Cartesian, Parameters>);
    factory.add_to_factory("weren", new weren_entry<Geographic, Cartesian, Parameters>);
}

开发者ID:zheng39562，项目名称:commonlibrary，代码行数:5，代码来源:putp4p.hpp

示例11: vandg_init

 inline void vandg_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("vandg", new vandg_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:Belial2010，项目名称:Pedestrian-Detection-Project，代码行数:4，代码来源:vandg.hpp

示例12: august_init

 inline void august_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("august", new august_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:VTREEM，项目名称:IFCPlusPlus_old，代码行数:4，代码来源:august.hpp

示例13: urm5_init

 inline void urm5_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("urm5", new urm5_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:Jopie64，项目名称:boost-svn，代码行数:4，代码来源:urm5.hpp

示例14: robin_init

 inline void robin_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("robin", new robin_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:AlexMioMio，项目名称:boost，代码行数:4，代码来源:robin.hpp

示例15: ortho_init

 inline void ortho_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("ortho", new ortho_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:VTREEM，项目名称:IFCPlusPlus_old，代码行数:4，代码来源:ortho.hpp

示例16: denoy_init

 inline void denoy_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("denoy", new denoy_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:VTREEM，项目名称:IFCPlusPlus_old，代码行数:4，代码来源:denoy.hpp

示例17: wag7_init

 inline void wag7_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("wag7", new wag7_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:Belial2010，项目名称:Pedestrian-Detection-Project，代码行数:4，代码来源:wag7.hpp

示例18: putp2_init

 inline void putp2_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("putp2", new putp2_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:AlexMioMio，项目名称:boost，代码行数:4，代码来源:putp2.hpp

示例19: nsper_init

 inline void nsper_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("nsper", new nsper_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("tpers", new tpers_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:AlexMioMio，项目名称:boost，代码行数:5，代码来源:nsper.hpp

示例20: bacon_init

 inline void bacon_init(detail::base_factory<Geographic, Cartesian, Parameters>& factory)
 {
     factory.add_to_factory("apian", new apian_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("ortel", new ortel_entry<Geographic, Cartesian, Parameters>);
     factory.add_to_factory("bacon", new bacon_entry<Geographic, Cartesian, Parameters>);
 }

开发者ID:VTREEM，项目名称:IFCPlusPlus_old，代码行数:6，代码来源:bacon.hpp

注：本文中的detail::base_factory类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。