• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ wxDataViewEvent类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中wxDataViewEvent类的典型用法代码示例。如果您正苦于以下问题：C++ wxDataViewEvent类的具体用法？C++ wxDataViewEvent怎么用？C++ wxDataViewEvent使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了wxDataViewEvent类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: OnColumnItemToggled

void DIALOG_BOM_EDITOR::OnColumnItemToggled( wxDataViewEvent& event )
{
    wxDataViewItem item = event.GetItem();

    int row = m_columnListCtrl->ItemToRow( item );

    int col = event.GetColumn();

    if( row == wxNOT_FOUND || row < 0 || row >= (int) m_bom->ColumnCount() ) return;

    BOM_COLUMN* bomColumn = m_bom->ColumnList.GetColumnByIndex( row );

    if( nullptr == bomColumn ) return;

    bool bValue = m_columnListCtrl->GetToggleValue( row, col );

    switch ( col )
    {
    default:
        break;
    case 1: // Column visibility
        bomColumn->SetVisible( bValue );

        // Insert a new column
        if( bValue )
        {
            m_bom->AddColumn( bomColumn );
        }
        else
        {
            m_bom->RemoveColumn( bomColumn );
        }
        break;
    }
}
开发者ID:hyOzd，项目名称:kicad-source-mirror，代码行数:35，代码来源:dialog_bom_editor.cpp


示例2: OnItemActivated

void DebuggerCallstackView::OnItemActivated(wxDataViewEvent& event)
{
    int row = m_dvListCtrl->ItemToRow(event.GetItem());

    StackEntry* entry = reinterpret_cast<StackEntry*>(m_dvListCtrl->GetItemData(event.GetItem()));
    if(entry) {
        long frame, frameLine;
        if(!entry->level.ToLong(&frame)) { frame = 0; }

        // Remove the currently selected item
        wxDataViewItem curitem = m_dvListCtrl->RowToItem(m_currLevel);
        if(curitem.IsOk()) {
            wxVariant v;
            v = ::MakeBitmapIndexText(wxString() << m_currLevel, 1);
            m_dvListCtrl->SetValue(v, m_currLevel, 0);
        }

        entry->line.ToLong(&frameLine);
        SetCurrentLevel(row);
        ManagerST::Get()->DbgSetFrame(frame, frameLine);

        // At this point m_currLevel is pointing to the new stack level
        // set it as the active one
        curitem = m_dvListCtrl->RowToItem(m_currLevel);
        if(curitem.IsOk()) {
            wxVariant v;
            v = ::MakeBitmapIndexText(wxString() << m_currLevel, 0);
            m_dvListCtrl->SetValue(v, m_currLevel, 0);
        }
    }
}
开发者ID:eranif，项目名称:codelite，代码行数:31，代码来源:DebuggerCallstackView.cpp


示例3: OnItemActivated

void LLDBThreadsView::OnItemActivated(wxDataViewEvent& event)
{
    CHECK_ITEM_RET(event.GetItem());
    LLDBThreadViewClientData* cd =
        reinterpret_cast<LLDBThreadViewClientData*>(m_dvListCtrlThreads->GetItemData(event.GetItem()));
    if(cd && !cd->GetThread().IsActive()) { m_plugin->GetLLDB()->SelectThread(cd->GetThread().GetId()); }
}
开发者ID:eranif，项目名称:codelite，代码行数:7，代码来源:LLDBThreadsView.cpp


示例4: OnEntryActivated

void OpenResourceDialog::OnEntryActivated(wxDataViewEvent& event)
{
    CHECK_ITEM_RET(event.GetItem());

    m_dataviewModel->GetClientObject(event.GetItem());
    OpenResourceDialogItemData* data =
        dynamic_cast<OpenResourceDialogItemData*>(m_dataviewModel->GetClientObject(event.GetItem()));
    if(data) { EndModal(wxID_OK); }
}
开发者ID:stahta01，项目名称:codelite，代码行数:9，代码来源:open_resource_dialog.cpp


示例5: OnItemActivated

void NodeJSDebuggerPane::OnItemActivated(wxDataViewEvent& event)
{
    CHECK_ITEM_RET(event.GetItem());
    FrameData* cd = (FrameData*)m_dvListCtrlCallstack->GetItemData(event.GetItem());
    CHECK_PTR_RET(cd);
    NodeJSDebugger::Ptr_t debugger = NodeJSWorkspace::Get()->GetDebugger();
    if(!debugger) return;
    debugger->SelectFrame(cd->index);
}
开发者ID:huanghjb，项目名称:codelite，代码行数:9，代码来源:NodeJSDebuggerPane.cpp


示例6: OnActivated

void MyFrame::OnActivated( wxDataViewEvent &event )
{
    wxString title = m_music_model->GetTitle( event.GetItem() );
    wxLogMessage( "wxEVT_DATAVIEW_ITEM_ACTIVATED, Item: %s", title );

    if (m_ctrl[0]->IsExpanded( event.GetItem() ))
    {
        wxLogMessage( "Item: %s is expanded", title );
    }
}
开发者ID:ruifig，项目名称:nutcracker，代码行数:10，代码来源:dataview.cpp


示例7: OnValueChanged

void ImplementParentVirtualFunctionsDialog::OnValueChanged(wxDataViewEvent& event)
{
    event.Skip();
    clFunctionImplDetails *cd = dynamic_cast<clFunctionImplDetails*>( m_dataviewModel->GetClientObject(event.GetItem()) );
    wxVector<wxVariant> cols = m_dataviewModel->GetItemColumnsData(event.GetItem());
    cd->SetVisibility( cols.at(2).GetString() );
    cd->SetPrependVirtualKeyword( cols.at(3).GetBool() );
    cd->SetSelected( cols.at(0).GetBool() );
    cd->SetDoxygen( cols.at(4).GetBool() );
}
开发者ID:05storm26，项目名称:codelite，代码行数:10，代码来源:implement_parent_virtual_functions.cpp


示例8: OnDropPossible

void MyFrame::OnDropPossible( wxDataViewEvent &event )
{
    wxDataViewItem item( event.GetItem() );

    // only allow drags for item, not containers
    if (m_music_model->IsContainer( item ) )
        event.Veto();

    if (event.GetDataFormat() != wxDF_UNICODETEXT)
        event.Veto();
}
开发者ID:ruifig，项目名称:nutcracker，代码行数:11，代码来源:dataview.cpp


示例9: OnHeaderClick

void MyFrame::OnHeaderClick( wxDataViewEvent &event )
{
    // we need to skip the event to let the default behaviour of sorting by
    // this column when it is clicked to take place
    event.Skip();

    int pos = m_ctrl[0]->GetColumnPosition( event.GetDataViewColumn() );

    wxLogMessage( "wxEVT_DATAVIEW_COLUMN_HEADER_CLICK, Column position: %d", pos );
    wxLogMessage( "Column width: %d", event.GetDataViewColumn()->GetWidth() );
}
开发者ID:ruifig，项目名称:nutcracker，代码行数:11，代码来源:dataview.cpp


示例10: OnSelectionChanged

void GitCommitListDlg::OnSelectionChanged(wxDataViewEvent& event)
{
    wxVariant v;
    if(!event.GetItem().IsOk()) {
        return;
    }

    m_dvListCtrlCommitList->GetValue(v, m_dvListCtrlCommitList->ItemToRow(event.GetItem()), 0);
    wxString commitID = v.GetString();
    wxString command = wxString::Format(wxT("%s --no-pager show %s"), m_gitPath.c_str(), commitID.c_str());
    m_process = CreateAsyncProcess(this, command, IProcessCreateDefault, m_workingDir);
}
开发者ID:05storm26，项目名称:codelite，代码行数:12，代码来源:gitCommitListDlg.cpp


示例11: OnLayerSelection

void DIALOG_KEEPOUT_AREA_PROPERTIES::OnLayerSelection( wxDataViewEvent& event )
{
    if( event.GetColumn() != 0 )
        return;

    int row = m_layers->ItemToRow( event.GetItem() );
    wxVariant layerID;
    m_layers->GetValue( layerID, row, 2 );
    bool selected = m_layers->GetToggleValue( row, 0 );

    m_zonesettings.m_Layers.set( ToLAYER_ID( layerID.GetInteger() ), selected );
}
开发者ID:KiCad，项目名称:kicad-source-mirror，代码行数:12，代码来源:dialog_keepout_area_properties.cpp


示例12: OnStartEditing

void MyFrame::OnStartEditing( wxDataViewEvent &event )
{
    wxString artist = m_music_model->GetArtist( event.GetItem() );
    if (artist == "Ludwig van Beethoven")
    {
        event.Veto();

        wxLogMessage( "wxEVT_DATAVIEW_ITEM_START_EDITING vetoed. Artist: %s", artist );
    }
    else
        wxLogMessage( "wxEVT_DATAVIEW_ITEM_START_EDITING not vetoed. Artist: %s", artist );

}
开发者ID:ruifig，项目名称:nutcracker，代码行数:13，代码来源:dataview.cpp


示例13: OnKeyChanged

void TableSettings::OnKeyChanged(wxDataViewEvent& event)
{
    Constraint *key = reinterpret_cast<Constraint*>( m_dvKeys->GetItemData( event.GetItem() ) );
    if( key ) {
        wxVariant val;
        event.GetModel()->GetValue( val, event.GetItem(), event.GetColumn() );
        if( ! val.IsNull() ) {
            key->SetName( val.GetString() );
        }
    }

    event.Skip();
}
开发者ID:05storm26，项目名称:codelite，代码行数:13，代码来源:TableSettings.cpp


示例14: OnItemActivated

void ThreadListPanel::OnItemActivated(wxDataViewEvent& event)
{
    if(!event.GetItem().IsOk()) return;

    wxVariant v;
    long threadId;
    m_dvListCtrl->GetValue(v, m_dvListCtrl->ItemToRow(event.GetItem()), 0);
    wxString str_id = v.GetString();
    if(str_id.ToCLong(&threadId)) {
        Manager* mgr = ManagerST::Get();
        mgr->DbgSetThread(threadId);
    }
}
开发者ID:292388900，项目名称:codelite，代码行数:13，代码来源:threadlistpanel.cpp


示例15: OnEditAccount

void SSHAccountManagerDlg::OnEditAccount(wxDataViewEvent& event)
{
    SSHAccountInfo *account = (SSHAccountInfo*)(m_dvListCtrlAccounts->GetItemData( event.GetItem() ));
    AddSSHAcountDlg dlg(this, *account);
    if ( dlg.ShowModal() == wxID_OK ) {
        // update the user info
        dlg.GetAccountInfo(*account);

        // update the UI
        m_dvListCtrlAccounts->GetStore()->SetValue(account->GetAccountName(), event.GetItem(), 0);
        m_dvListCtrlAccounts->GetStore()->SetValue(account->GetUsername(), event.GetItem(), 1);
        m_dvListCtrlAccounts->Refresh();
    }
}
开发者ID:AndrianDTR，项目名称:codelite，代码行数:14，代码来源:SSHAccountManagerDlg.cpp


示例16: OnItemExpanding

void ImportFilesDialogNew::OnItemExpanding(wxDataViewEvent& event)
{
    event.Skip();
    wxDataViewItemArray children;
    if ( m_dataviewModel->GetChildren(event.GetItem(), children) ) {
        wxDataViewItem child = children.Item(0);
        ImportFilesDlgData *cd = dynamic_cast<ImportFilesDlgData*>(m_dataviewModel->GetClientObject(child));
        if ( cd && cd->IsDummy() ) {
            cd = dynamic_cast<ImportFilesDlgData*>(m_dataviewModel->GetClientObject(event.GetItem()));
            m_dataviewModel->DeleteItem( child );
            wxDir dir ( cd->GetPath() );
            DoBuildTree( event.GetItem(), dir, cd->IsChecked() );
        }
    }
}
开发者ID:HTshandou，项目名称:codelite，代码行数:15，代码来源:ImportFilesDialogNew.cpp


示例17: SendItemEvent

void wxTreeListCtrl::SendItemEvent(wxEventType evt, wxDataViewEvent& eventDV)
{
    wxTreeListEvent eventTL(evt, this, m_model->FromDVI(eventDV.GetItem()));

    if ( !ProcessWindowEvent(eventTL) )
    {
        eventDV.Skip();
        return;
    }

    if ( !eventTL.IsAllowed() )
    {
        eventDV.Veto();
    }
}
开发者ID:iokto，项目名称:newton-dynamics，代码行数:15，代码来源:treelist.cpp


示例18: OnTabActivated

void OpenWindowsPanel::OnTabActivated(wxDataViewEvent& event)
{
    event.Skip();
    CHECK_WORKSPACE_CLOSING();

    wxDataViewItem item = event.GetItem();
    CHECK_ITEM_RET(item);

    TabClientData* data = reinterpret_cast<TabClientData*>(m_dvListCtrl->GetItemData(item));
    if(data->IsFile()) {
        m_mgr->OpenFile(data->tab.filename.GetFullPath());
    } else {
        m_mgr->SelectPage(m_mgr->FindPage(data->tab.text));
    }
}
开发者ID:eranif，项目名称:codelite，代码行数:15，代码来源:openwindowspanel.cpp


示例19: OnItemRightClick

void mmCustomFieldListDialog::OnItemRightClick(wxDataViewEvent& event)
{
    wxCommandEvent evt(wxEVT_COMMAND_MENU_SELECTED, wxID_ANY) ;
    evt.SetEventObject( this );

    Model_CustomField::Data *field = Model_CustomField::instance().get(m_field_id);

    wxMenu* mainMenu = new wxMenu;
    if (field) mainMenu->SetTitle(field->DESCRIPTION);
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_NEW_FIELD, _("&Add ")));
    mainMenu->AppendSeparator();
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_EDIT_FIELD, _("&Edit ")));
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_DELETE_FIELD, _("&Remove ")));
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_UPDATE_FIELD, _("&Massive content update ")));
    if (!field)
    {
        mainMenu->Enable(MENU_EDIT_FIELD, false);
        mainMenu->Enable(MENU_DELETE_FIELD, false);
        mainMenu->Enable(MENU_UPDATE_FIELD, false);
    }

    PopupMenu(mainMenu);
    delete mainMenu;
    event.Skip();
}
开发者ID:vomikan，项目名称:moneymanagerex，代码行数:25，代码来源:customfieldlistdialog.cpp


示例20: OnItemRightClick

void mmAttachmentDialog::OnItemRightClick(wxDataViewEvent& event)
{
    wxCommandEvent evt(wxEVT_COMMAND_MENU_SELECTED, wxID_ANY) ;
    evt.SetEventObject( this );

    Model_Attachment::Data* attachment = Model_Attachment::instance().get(m_attachment_id);

    wxMenu* mainMenu = new wxMenu;
    if (attachment) mainMenu->SetTitle(attachment->DESCRIPTION);
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_NEW_ATTACHMENT, _("&Add ")));
    mainMenu->AppendSeparator();
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_OPEN_ATTACHMENT, _("&Open ")));
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_EDIT_ATTACHMENT, _("&Edit ")));
    if (!attachment) mainMenu->Enable(MENU_EDIT_ATTACHMENT, false);
    mainMenu->Append(new wxMenuItem(mainMenu, MENU_DELETE_ATTACHMENT, _("&Remove ")));

    //Disable buttons
    wxString AttachmentsFolder = mmex::getPathAttachment(mmAttachmentManage::InfotablePathSetting());
    if (AttachmentsFolder == wxEmptyString || !wxDirExists(AttachmentsFolder))
        mainMenu->Enable(MENU_NEW_ATTACHMENT, false);

    if (!attachment)
    {
        mainMenu->Enable(MENU_OPEN_ATTACHMENT, false);
        mainMenu->Enable(MENU_EDIT_ATTACHMENT, false);
        mainMenu->Enable(MENU_DELETE_ATTACHMENT, false);
    }

    PopupMenu(mainMenu);
    delete mainMenu;
    event.Skip();
}
开发者ID:moneymanagerex，项目名称:moneymanagerex，代码行数:32，代码来源:attachmentdialog.cpp



注：本文中的wxDataViewEvent类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ wxDataViewItem类代码示例发布时间：2022-05-31
下一篇：
C++ wxDataViewCtrl类代码示例发布时间：2022-05-31
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap