• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ oofegGraphicContext类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中oofegGraphicContext类的典型用法代码示例。如果您正苦于以下问题：C++ oofegGraphicContext类的具体用法？C++ oofegGraphicContext怎么用？C++ oofegGraphicContext使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了oofegGraphicContext类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: drawRawGeometry

void QTrPlaneStrain :: drawRawGeometry(oofegGraphicContext &gc)
{
    WCRec p [ 3 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
    p [ 0 ].z = 0.;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
    p [ 1 ].z = 0.;
    p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
    p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
    p [ 2 ].z = 0.;

    go =  CreateTriangle3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:29，代码来源:qtrplanestrain.C


示例2: drawRawCrossSections

void
Lattice2d :: drawRawCrossSections(oofegGraphicContext &gc, TimeStep *tStep)
{
    GraphicObj *go;

    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getCrossSectionColor() );
    EASValsSetLayer(OOFEG_RAW_CROSSSECTION_LAYER);

    FloatArray coords;
    this->giveCrossSectionCoordinates(coords);

    p [ 0 ].x = ( FPNum ) coords.at(1);
    p [ 0 ].y = ( FPNum ) coords.at(2);
    p [ 0 ].z = ( FPNum ) coords.at(3);
    p [ 1 ].x = ( FPNum ) coords.at(4);
    p [ 1 ].y = ( FPNum ) coords.at(5);
    p [ 1 ].z = ( FPNum ) coords.at(6);

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:30，代码来源:lattice2d.C


示例3: drawDeformedGeometry

void QTrPlaneStrain :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type)
{
    WCRec p [ 3 ];
    GraphicObj *go;
    TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep();
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].z = 0.;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].z = 0.;
    p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 2 ].z = 0.;

    go =  CreateTriangle3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:30，代码来源:qtrplanestrain.C


示例4: drawDeformedGeometry

void LSpace :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    int i;
    WCRec p [ 8 ];
    GraphicObj *go;
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    EASValsSetFillStyle(FILL_SOLID);
    for ( i = 0; i < 8; i++ ) {
        p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale);
    }

    go =  CreateHexahedron(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:rreissnerr，项目名称:oofem，代码行数:27，代码来源:lspace.C


示例5: drawRawGeometry

void Brick1_ht :: drawRawGeometry(oofegGraphicContext &gc)
{
    WCRec p [ 8 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    EASValsSetFillStyle(FILL_SOLID);
    for ( int i = 0; i < 8; i++ ) {
        p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
        p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
        p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
    }

    go =  CreateHexahedron(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:26，代码来源:brick1_ht.C


示例6: drawRawGeometry

void InterfaceElem2dQuad :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    GraphicObj *go;
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
    p [ 0 ].z = 0.0;
    p [ 1 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
    p [ 1 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
    p [ 1 ].z = 0.0;
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
    p [ 0 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
    p [ 0 ].z = 0.0;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
    p [ 1 ].z = 0.0;
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:rreissnerr，项目名称:oofem，代码行数:33，代码来源:interfaceelem2dquad.C


示例7: drawDeformedGeometry

void InterfaceElem2dQuad :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    GraphicObj *go;
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    double defScale = gc.getDefScale();

    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER + 1);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 0 ].z = 0.0;
    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 1 ].z = 0.0;
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);

    p [ 0 ].x = ( FPNum ) this->giveNode(4)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(4)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 0 ].z = 0.0;
    p [ 1 ].x = ( FPNum ) this->giveNode(5)->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(5)->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 1 ].z = 0.0;
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:rreissnerr，项目名称:oofem，代码行数:34，代码来源:interfaceelem2dquad.C


示例8: drawRawGeometry

void
TR_SHELL02 :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    WCRec p [ 3 ];
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( this->giveMaterial()->isActivated(tStep) ) {
        EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
        EASValsSetColor( gc.getElementColor() );
        EASValsSetEdgeColor( gc.getElementEdgeColor() );
        EASValsSetEdgeFlag(true);
        EASValsSetFillStyle(FILL_SOLID);
        EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(3);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(1);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(2);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(3);
        p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveCoordinate(1);
        p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveCoordinate(2);
        p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveCoordinate(3);

        go =  CreateTriangle3D(p);
        EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
        EGAttachObject(go, ( EObjectP ) this);
        EMAddGraphicsToModel(ESIModel(), go);
    }
}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:33，代码来源:tr_shell02.C


示例9: drawDeformedGeometry

void LIBeam3dNL :: drawDeformedGeometry(oofegGraphicContext &gc, UnknownType type)
{
    GraphicObj *go;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    TimeStep *tStep = domain->giveEngngModel()->giveCurrentStep();
    double defScale = gc.getDefScale();
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* poin */
    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale);

    p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale);
    p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale);
    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:26，代码来源:libeam3dnl.C


示例10: drawDeformedGeometry

void
TR_SHELL02 :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    WCRec p [ 3 ];
    GraphicObj *go;
    double defScale = gc.getDefScale();

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( this->giveMaterial()->isActivated(tStep) ) {
        EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
        EASValsSetColor( gc.getDeformedElementColor() );
        EASValsSetEdgeColor( gc.getElementEdgeColor() );
        EASValsSetEdgeFlag(true);
        EASValsSetFillStyle(FILL_SOLID);
        EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveUpdatedCoordinate(3, tStep, defScale);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveUpdatedCoordinate(3, tStep, defScale);
        p [ 2 ].x = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(1, tStep, defScale);
        p [ 2 ].y = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(2, tStep, defScale);
        p [ 2 ].z = ( FPNum ) this->giveNode(3)->giveUpdatedCoordinate(3, tStep, defScale);

        go =  CreateTriangle3D(p);
        EGWithMaskChangeAttributes(WIDTH_MASK | FILL_MASK | COLOR_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK | LAYER_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
    }
}
开发者ID:rainbowlqs，项目名称:oofem，代码行数:33，代码来源:tr_shell02.C


示例11: drawScalar

void LSpace :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int i, indx, result = 0;
    WCRec p [ 8 ];
    GraphicObj *tr;
    FloatArray v [ 8 ];
    double s [ 8 ], defScale = 0.0;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarMode() == ISM_recovered ) {
        for ( i = 1; i <= 8; i++ ) {
            result += this->giveInternalStateAtNode(v [ i - 1 ], gc.giveIntVarType(), gc.giveIntVarMode(), i, tStep);
        }

        if ( result != 8 ) {
            return;
        }
    } else if ( gc.giveIntVarMode() == ISM_local ) {
        return;
    }

    indx = gc.giveIntVarIndx();

    for ( i = 1; i <= 8; i++ ) {
        s [ i - 1 ] = v [ i - 1 ].at(indx);
    }

    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
    if ( gc.getScalarAlgo() == SA_ISO_SURF ) {
        for ( i = 0; i < 8; i++ ) {
            if ( gc.getInternalVarsDefGeoFlag() ) {
                // use deformed geometry
                defScale = gc.getDefScale();
                p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(1, tStep, defScale);
                p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(2, tStep, defScale);
                p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveUpdatedCoordinate(3, tStep, defScale);
            } else {
                p [ i ].x = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(1);
                p [ i ].y = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(2);
                p [ i ].z = ( FPNum ) this->giveNode(i + 1)->giveCoordinate(3);
            }
        }

        gc.updateFringeTableMinMax(s, 8);
        tr = CreateHexahedronWD(p, s);
        EGWithMaskChangeAttributes(LAYER_MASK | EDGE_COLOR_MASK | EDGE_FLAG_MASK, tr);
        EMAddGraphicsToModel(ESIModel(), tr);
    }
}
开发者ID:rreissnerr，项目名称:oofem，代码行数:54，代码来源:lspace.C


示例12: drawDeformedGeometry

void CohesiveSurface3d :: drawDeformedGeometry(oofegGraphicContext &gc, TimeStep *tStep, UnknownType type)
{
    GraphicObj *go1, *go2;

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    double defScale = gc.getDefScale();
    WCRec p [ 2 ];
    EASValsSetLineWidth(OOFEG_DEFORMED_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getDeformedElementColor() );
    EASValsSetLayer(OOFEG_DEFORMED_GEOMETRY_LAYER);

    //  get the displaced particle coordinates
    Particle *nodeA = ( Particle * ) giveNode(1);
    Particle *nodeB = ( Particle * ) giveNode(2);
    p [ 0 ].x = nodeA->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 0 ].y = nodeA->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 0 ].z = nodeA->giveUpdatedCoordinate(3, tStep, defScale);

    p [ 1 ].x = nodeB->giveUpdatedCoordinate(1, tStep, defScale);
    p [ 1 ].y = nodeB->giveUpdatedCoordinate(2, tStep, defScale);
    p [ 1 ].z = nodeB->giveUpdatedCoordinate(3, tStep, defScale);

    // plot the displaced particles
    EASValsSetMType(FILLED_CIRCLE_MARKER);
    EASValsSetColor( gc.getNodeColor() );
    EASValsSetMSize(6);

    // plot the first particle
    go1 = CreateMarker3D(p);
    EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go1);
    EMAddGraphicsToModel(ESIModel(), go1);

    // take into account periodic conditions
    if ( giveNumberOfNodes() == 3 ) {
        Node *nodeC = ( Particle * ) giveNode(3);
        p [ 1 ].x += kxa + kxa * defScale * ( nodeC->giveDofWithID(D_u)->giveUnknown(VM_Total, tStep) ) + kyb * defScale * ( nodeC->giveDofWithID(R_u)->giveUnknown(VM_Total, tStep) );
        p [ 1 ].y += kyb + kyb * defScale * ( nodeC->giveDofWithID(D_v)->giveUnknown(VM_Total, tStep) ) + kzc * defScale * ( nodeC->giveDofWithID(R_v)->giveUnknown(VM_Total, tStep) );
        p [ 1 ].z += kzc + kzc * defScale * ( nodeC->giveDofWithID(D_w)->giveUnknown(VM_Total, tStep) ) + kxa * defScale * ( nodeC->giveDofWithID(R_w)->giveUnknown(VM_Total, tStep) );
        EASValsSetMType(CIRCLE_MARKER);
    }

    // plot the second particle
    go2 = CreateMarker3D(p + 1);
    EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go2);
    EMAddGraphicsToModel(ESIModel(), go2);
}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:49，代码来源:cohsur3d.C


示例13: drawRawGeometry

// TODO: FIX OOFEG implementation
void TrPlaneStress2dXFEM :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    XfemManager *xf = this->giveDomain()->giveXfemManager();
    if ( !xf->isElementEnriched(this) ) {
        TrPlaneStress2d :: drawRawGeometry(gc, tStep);
    } else {
        if ( integrationRulesArray.size() > 1 ) {
#if 0
            for ( auto &ir: integrationRulesArray ) {
                // TODO: Implement visualization.
                PatchIntegrationRule *iRule = dynamic_cast< PatchIntegrationRule * >( ir );
                if ( iRule ) {
                    iRule->givePatch()->draw(gc);
                }
            }
#endif
        } else {
            TrPlaneStress2d :: drawRawGeometry(gc, tStep);
        }
    }
}
开发者ID:rreissnerr，项目名称:oofem，代码行数:26，代码来源:trplanstrssxfem.C


示例14: drawRawGeometry

// TODO: FIX OOFEG implementation
void TrPlaneStress2dXFEM :: drawRawGeometry(oofegGraphicContext &context)
{
    if ( !context.testElementGraphicActivity(this) ) {
        return;
    }

    XfemManager *xf = this->giveDomain()->giveXfemManager();
    if ( !xf->isElementEnriched(this) ) {
    	TrPlaneStress2d :: drawRawGeometry(context);
    } else {
        if ( numberOfIntegrationRules > 1 ) {
            int i;
//            PatchIntegrationRule *iRule;
            for ( i = 0; i < numberOfIntegrationRules; i++ ) {

            	// TODO: Implement visualization.
/*
            	iRule = dynamic_cast< PatchIntegrationRule * >( integrationRulesArray [ i ] );
                if ( iRule ) {
                    iRule->givePatch()->draw(context);
                }
*/
            }
        } else {
        	TrPlaneStress2d :: drawRawGeometry(context);
        }
    }
}
开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:29，代码来源:trplanstrssxfem.C


示例15: drawScalar

void InterfaceElem1d :: drawScalar(oofegGraphicContext &context)
{
    int i, indx, result = 0;
    GaussPoint *gp;
    IntegrationRule *iRule = integrationRulesArray [ giveDefaultIntegrationRule() ];
    TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep();
    FloatArray gcoord(3), v1;
    WCRec p [ 1 ];
    IntArray map;
    GraphicObj *go;
    double val [ 1 ];

    if ( !context.testElementGraphicActivity(this) ) {
        return;
    }

    if ( context.getInternalVarsDefGeoFlag() ) {
        double defScale = context.getDefScale();
        p [ 0 ].x = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(1, tStep, EID_MomentumBalance, defScale) );
        p [ 0 ].y = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(2, tStep, EID_MomentumBalance, defScale) );
        p [ 0 ].z = ( FPNum ) 0.5 * ( this->giveNode(1)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) +
                                     this->giveNode(2)->giveUpdatedCoordinate(3, tStep, EID_MomentumBalance, defScale) );
    } else {
        p [ 0 ].x = ( FPNum )( this->giveNode(1)->giveCoordinate(1) );
        p [ 0 ].y = ( FPNum )( this->giveNode(1)->giveCoordinate(2) );
        p [ 0 ].z = ( FPNum )( this->giveNode(1)->giveCoordinate(3) );
    }

    result += giveIPValue(v1, iRule->getIntegrationPoint(0), context.giveIntVarType(), tStep);


    for ( i = 0; i < iRule->getNumberOfIntegrationPoints(); i++ ) {
        result = 0;
        gp  = iRule->getIntegrationPoint(i);
        result += giveIPValue(v1, gp, context.giveIntVarType(), tStep);
        result += this->giveIntVarCompFullIndx( map, context.giveIntVarType() );
        if ( result != 2 ) {
            continue;
        }

        if ( ( indx = map.at( context.giveIntVarIndx() ) ) == 0 ) {
            return;
        }

        val [ 0 ] = v1.at(indx);
        context.updateFringeTableMinMax(val, 1);

        EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
        EASValsSetMType(FILLED_CIRCLE_MARKER);
        go = CreateMarkerWD3D(p, val [ 0 ]);
        EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
        //}
    }
}
开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:57，代码来源:interfaceelement1d.C


示例16: drawScalar

void IntElLine2 :: drawScalar(oofegGraphicContext &gc, TimeStep *tStep)
{
    int indx, result = 0;
    IntegrationRule *iRule = this->giveDefaultIntegrationRulePtr();
    FloatArray gcoord(3), v1;
    WCRec p [ 1 ];
    GraphicObj *go;
    double val [ 1 ];

    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    if ( gc.giveIntVarMode() == ISM_recovered ) {
        return;
    }

    for ( GaussPoint *gp: *iRule ) {
        result = 0;
        result += giveIPValue(v1, gp, gc.giveIntVarType(), tStep);
        if ( result != 1 ) {
            continue;
        }

        indx = gc.giveIntVarIndx();

        result += this->computeGlobalCoordinates( gcoord, gp->giveNaturalCoordinates() );

        p [ 0 ].x = ( FPNum ) gcoord.at(1);
        p [ 0 ].y = ( FPNum ) gcoord.at(2);
        p [ 0 ].z = 0.;

        val [ 0 ] = v1.at(indx);
        gc.updateFringeTableMinMax(val, 1);
        //if (val[0] > 0.) {

        EASValsSetLayer(OOFEG_VARPLOT_PATTERN_LAYER);
        EASValsSetMType(FILLED_CIRCLE_MARKER);
        go = CreateMarkerWD3D(p, val [ 0 ]);
        EGWithMaskChangeAttributes(LAYER_MASK | FILL_MASK | MTYPE_MASK, go);
        EMAddGraphicsToModel(ESIModel(), go);
        //}
    }
}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:44，代码来源:intelline2.C


示例17: drawScalar

void TrPlaneStress2dXFEM :: drawScalar(oofegGraphicContext &context)
{
    if ( !context.testElementGraphicActivity(this) ) {
        return;
    }
    XfemManager *xf = this->giveDomain()->giveXfemManager();
    if ( !xf->isElementEnriched(this) ) {
    	TrPlaneStress2d :: drawScalar(context);
    } else {
        if ( context.giveIntVarMode() == ISM_local ) {
            int indx;
            double val;
            FloatArray s(3), v;

            indx = context.giveIntVarIndx();

            TimeStep *tStep = this->giveDomain()->giveEngngModel()->giveCurrentStep();
            PatchIntegrationRule *iRule;
            for ( int i = 0; i < numberOfIntegrationRules; i++ ) {
                iRule = dynamic_cast< PatchIntegrationRule * >( integrationRulesArray [ i ] );

 #if 0
                val = iRule->giveMaterial();
 #else
                val = 0.0;
                for ( int j = 0; j < iRule->giveNumberOfIntegrationPoints(); j++ ) {
                    GaussPoint *gp = iRule->getIntegrationPoint(0);
                    giveIPValue(v, gp, context.giveIntVarType(), tStep);
                    val += v.at(indx);
                }

                val /= iRule->giveNumberOfIntegrationPoints();
 #endif
                s.at(1) = s.at(2) = s.at(3) = val;
            	// TODO: Implement visualization.
//                iRule->givePatch()->drawWD(context, s);

            }
        } else {
        	TrPlaneStress2d :: drawScalar(context);
        }
    }

}
开发者ID:JimBrouzoulis，项目名称:OOFEM_LargeDef，代码行数:44，代码来源:trplanstrssxfem.C


示例18: drawRawGeometry

void Truss2d :: drawRawGeometry(oofegGraphicContext &gc)
{
    int c1, c2;
    resolveCoordIndices(c1, c2);

    GraphicObj *go;
    //  if (!go) { // create new one
    WCRec p [ 2 ]; /* point */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    if ( cs_mode == 0 ) {
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].y = 0.;
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].y = 0.;
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
    } else if ( cs_mode == 1 ) {
        p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 0 ].z = 0.;
        p [ 1 ].x = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
        p [ 1 ].z = 0.;
    } else if ( cs_mode == 2 ) {
        p [ 0 ].x = 0.;
        p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(c1);
        p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(c2);
        p [ 1 ].x = 0.;
        p [ 1 ].y = ( FPNum ) this->giveNode(2)->giveCoordinate(c1);
        p [ 1 ].z = ( FPNum ) this->giveNode(2)->giveCoordinate(c2);
    }

    go = CreateLine3D(p);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:MartinFagerstrom，项目名称:oofem，代码行数:43，代码来源:truss2d.C


示例19: drawRawGeometry

void CohesiveSurface3d :: drawRawGeometry(oofegGraphicContext &gc, TimeStep *tStep)
{
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    //WCRec p[4];
    GraphicObj *go;

    Particle *nodeA = ( Particle * ) this->giveNode(1);
    Particle *nodeB = ( Particle * ) this->giveNode(2);
    //double rA = nodeA -> giveRadius();
    //double rB = nodeB -> giveRadius();
    //double r = (rA+rB)/4.;

    EASValsSetLineWidth(OOFEG_RAW_GEOMETRY_WIDTH);
    EASValsSetColor( gc.getElementColor() );
    EASValsSetEdgeColor( gc.getElementEdgeColor() );
    EASValsSetEdgeFlag(true);
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);

    WCRec pl [ 2 ];
    // determine coordinates of the particles connected by this element
    pl [ 0 ].x = ( FPNum ) nodeA->giveCoordinate(1);
    pl [ 0 ].y = ( FPNum ) nodeA->giveCoordinate(2);
    pl [ 0 ].z = ( FPNum ) nodeA->giveCoordinate(3);
    pl [ 1 ].x = ( FPNum ) nodeB->giveCoordinate(1);
    pl [ 1 ].y = ( FPNum ) nodeB->giveCoordinate(2);
    pl [ 1 ].z = ( FPNum ) nodeB->giveCoordinate(3);
    if ( giveNumberOfNodes() == 3 ) {
        // the second particle should be shifted (periodic arrangement)
        Particle *nodeC = ( Particle * ) this->giveNode(3);
        pl [ 1 ].x += kx * ( nodeC->giveCoordinate(1) );
        pl [ 1 ].y += ky * ( nodeC->giveCoordinate(2) );
        pl [ 1 ].z += kz * ( nodeC->giveCoordinate(3) );
    }

    //  plot a line segment connecting the particles
    go = CreateLine3D(pl);
    EGWithMaskChangeAttributes(WIDTH_MASK | COLOR_MASK | LAYER_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:Benjamin-git，项目名称:OOFEM_Jim，代码行数:43，代码来源:cohsur3d.C


示例20: drawRawGeometry

void LumpedMassElement :: drawRawGeometry(oofegGraphicContext &gc)
{
    GraphicObj *go;
    WCRec p [ 1 ]; /* point */
    if ( !gc.testElementGraphicActivity(this) ) {
        return;
    }

    EASValsSetColor( gc.getElementColor() );
    EASValsSetLayer(OOFEG_RAW_GEOMETRY_LAYER);
    EASValsSetMType(SQUARE_MARKER);
    EASValsSetMSize(8);
    p [ 0 ].x = ( FPNum ) this->giveNode(1)->giveCoordinate(1);
    p [ 0 ].y = ( FPNum ) this->giveNode(1)->giveCoordinate(2);
    p [ 0 ].z = ( FPNum ) this->giveNode(1)->giveCoordinate(3);
    go = CreateMarker3D(p);
    EGWithMaskChangeAttributes(COLOR_MASK | LAYER_MASK | MTYPE_MASK | MSIZE_MASK, go);
    EGAttachObject(go, ( EObjectP ) this);
    EMAddGraphicsToModel(ESIModel(), go);
}
开发者ID:JimBrouzoulis，项目名称:oofem-1，代码行数:20，代码来源:lumpedmasselement.C



注：本文中的oofegGraphicContext类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ oop类代码示例发布时间：2022-05-31
下一篇：
C++ ola类代码示例发布时间：2022-05-31
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap