• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

C++ cChunkDesc类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中cChunkDesc的典型用法代码示例。如果您正苦于以下问题:C++ cChunkDesc类的具体用法?C++ cChunkDesc怎么用?C++ cChunkDesc使用的例子?那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了cChunkDesc类的20个代码示例,这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞,您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: GenFinish

void cFinishGenSnow::GenFinish(cChunkDesc & a_ChunkDesc)
{
	// Add a snow block in snowy biomes onto blocks that can be snowed over
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int Height = a_ChunkDesc.GetHeight(x, z);
			if (GetSnowStartHeight(a_ChunkDesc.GetBiome(x, z)) > Height)
			{
				// Height isn't high enough for snow to start forming.
				continue;
			}

			if (!cBlockInfo::IsSnowable(a_ChunkDesc.GetBlockType(x, Height, z)) || (Height >= cChunkDef::Height - 1))
			{
				// The top block can't be snown over.
				continue;
			}

			a_ChunkDesc.SetBlockType(x, Height + 1, z, E_BLOCK_SNOW);
			a_ChunkDesc.SetHeight(x, z, Height + 1);
		}  // for x
	}  // for z
}
开发者ID:jammet,项目名称:MCServer,代码行数:25,代码来源:FinishGen.cpp


示例2: DrawRoad

	/** Draws the road into the chunk.
	The heightmap is not queried from the heightgen, but is given via parameter, so that it may be queried just
	once for all roads in a chunk. */
	void DrawRoad(cChunkDesc & a_Chunk, cPlacedPiece & a_Road, cChunkDef::HeightMap & a_HeightMap)
	{
		cCuboid RoadCoords = a_Road.GetHitBox();
		RoadCoords.Sort();
		int MinX = std::max(RoadCoords.p1.x - a_Chunk.GetChunkX() * cChunkDef::Width, 0);
		int MaxX = std::min(RoadCoords.p2.x - a_Chunk.GetChunkX() * cChunkDef::Width, cChunkDef::Width - 1);
		int MinZ = std::max(RoadCoords.p1.z - a_Chunk.GetChunkZ() * cChunkDef::Width, 0);
		int MaxZ = std::min(RoadCoords.p2.z - a_Chunk.GetChunkZ() * cChunkDef::Width, cChunkDef::Width - 1);
		auto WaterRoadBlockType = m_Prefabs.GetVillageWaterRoadBlockType();
		auto WaterRoadBlockMeta = m_Prefabs.GetVillageWaterRoadBlockMeta();
		auto RoadBlockType = m_Prefabs.GetVillageRoadBlockType();
		auto RoadBlockMeta = m_Prefabs.GetVillageRoadBlockMeta();
		for (int z = MinZ; z <= MaxZ; z++)
		{
			for (int x = MinX; x <= MaxX; x++)
			{
				if (IsBlockWater(a_Chunk.GetBlockType(x, cChunkDef::GetHeight(a_HeightMap, x, z), z)))
				{
					a_Chunk.SetBlockTypeMeta(x, cChunkDef::GetHeight(a_HeightMap, x, z), z, WaterRoadBlockType, WaterRoadBlockMeta);
				}
				else
				{
					a_Chunk.SetBlockTypeMeta(x, cChunkDef::GetHeight(a_HeightMap, x, z), z, RoadBlockType, RoadBlockMeta);
				}
			}
		}
	}
开发者ID:Haxi52,项目名称:cuberite,代码行数:30,代码来源:VillageGen.cpp


示例3: ComposeTerrain

void cCompoGenSameBlock::ComposeTerrain(cChunkDesc & a_ChunkDesc, const cChunkDesc::Shape & a_Shape)
{
	a_ChunkDesc.SetHeightFromShape(a_Shape);
	a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int Start;
			if (m_IsBedrocked)
			{
				a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
				Start = 1;
			}
			else
			{
				Start = 0;
			}
			for (int y = a_ChunkDesc.GetHeight(x, z); y >= Start; y--)
			{
				a_ChunkDesc.SetBlockType(x, y, z, m_BlockType);
			}  // for y
		}  // for z
	}  // for x
}
开发者ID:AddictXQ,项目名称:cuberite,代码行数:25,代码来源:CompoGen.cpp


示例4: GenFinish

void cFinishGenIce::GenFinish(cChunkDesc & a_ChunkDesc)
{
	// Turn surface water into ice in icy biomes
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			switch (a_ChunkDesc.GetBiome(x, z))
			{
				case biIcePlains:
				case biIceMountains:
				case biTaiga:
				case biTaigaHills:
				case biFrozenRiver:
				case biFrozenOcean:
				{
					int Height = a_ChunkDesc.GetHeight(x, z);
					switch (a_ChunkDesc.GetBlockType(x, Height, z))
					{
						case E_BLOCK_WATER:
						case E_BLOCK_STATIONARY_WATER:
						{
							a_ChunkDesc.SetBlockType(x, Height, z, E_BLOCK_ICE);
							break;
						}
					}
					break;
				}
			}
		}
	}  // for z
}
开发者ID:JoeClacks,项目名称:MCServer,代码行数:32,代码来源:FinishGen.cpp


示例5: GenFinish

void cPOCPieceGenerator::GenFinish(cChunkDesc & a_ChunkDesc)
{
	int BlockX = a_ChunkDesc.GetChunkX() * cChunkDef::Width;
	int BlockZ = a_ChunkDesc.GetChunkZ() * cChunkDef::Width;
	if (
		(BlockX + 16 < m_Bounds.p1.x) || (BlockX > m_Bounds.p2.x) ||  // X coords out of bounds of the generated structure
		(BlockZ + 16 < m_Bounds.p1.z) || (BlockZ > m_Bounds.p2.z)     // Z coords out of bounds of the generated structure
	)
	{
		return;
	}
	
	// Imprint each piece in the chunk:
	for (cPlacedPieces::const_iterator itr = m_Pieces.begin(), end = m_Pieces.end(); itr != end; ++itr)
	{
		const Vector3i & Pos = (*itr)->GetCoords();
		Vector3i Size = (*itr)->GetPiece().GetSize();
		if (((*itr)->GetNumCCWRotations() % 2) == 1)
		{
			std::swap(Size.x, Size.z);
		}
		if (
			(Pos.x >= BlockX + 16) || (Pos.x + Size.x - 1 < BlockX) ||
			(Pos.z >= BlockZ + 16) || (Pos.z + Size.z - 1 < BlockZ)
		)
		{
			// This piece doesn't intersect the chunk
			continue;
		}
			
		((cPOCPiece &)(*itr)->GetPiece()).ImprintInChunk(a_ChunkDesc, Pos, (*itr)->GetNumCCWRotations());
	}  // for itr - m_Pieces[]
	a_ChunkDesc.UpdateHeightmap();
}
开发者ID:ChriPiv,项目名称:MCServer,代码行数:34,代码来源:POCPieceGenerator.cpp


示例6: GenFinish

void cStructGenMarbleCaves::GenFinish(cChunkDesc & a_ChunkDesc)
{
	cNoise Noise(m_Seed);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		const float zz = static_cast<float>(a_ChunkDesc.GetChunkZ() * cChunkDef::Width + z);
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			const float xx = static_cast<float>(a_ChunkDesc.GetChunkX() * cChunkDef::Width + x);

			int Top = a_ChunkDesc.GetHeight(x, z);
			for (int y = 1; y < Top; ++y)
			{
				if (a_ChunkDesc.GetBlockType(x, y, z) != E_BLOCK_STONE)
				{
					continue;
				}

				const float yy = static_cast<float>(y);
				const float WaveNoise = 1;
				if (cosf(GetMarbleNoise(xx, yy * 0.5f, zz, Noise)) * fabs(cosf(yy * 0.2f + WaveNoise * 2) * 0.75f + WaveNoise) > 0.0005f)
				{
					a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_AIR);
				}
			}  // for y
		}  // for x
	}  // for z
}
开发者ID:ThuGie,项目名称:MCServer,代码行数:28,代码来源:Caves.cpp


示例7: DrawIntoChunk

	virtual void DrawIntoChunk(cChunkDesc & a_ChunkDesc) override
	{
		int BlockStartX = a_ChunkDesc.GetChunkX() * cChunkDef::Width;
		int BlockStartZ = a_ChunkDesc.GetChunkZ() * cChunkDef::Width;
		int BlockEndX = BlockStartX + cChunkDef::Width;
		int BlockEndZ = BlockStartZ + cChunkDef::Width;
		for (sRavineDefPoints::const_iterator itr = m_DefPoints.begin(), end = m_DefPoints.end(); itr != end; ++itr)
		{
			if (
				(ceilf (itr->m_X + itr->m_Radius + 2) < BlockStartX) ||
				(floorf(itr->m_X - itr->m_Radius - 2) > BlockEndX) ||
				(ceilf (itr->m_Z + itr->m_Radius + 2) < BlockStartZ) ||
				(floorf(itr->m_Z - itr->m_Radius - 2) > BlockEndZ)
			)
			{
				// Cannot intersect, bail out early
				continue;
			}
			
			// Carve out a cylinder around the xz point, up to (m_Radius + 2) in diameter, from Bottom to Top:
			// On each height level, use m_PerHeightRadius[] to modify the actual radius used
			// EnlargedRadiusSq is the square of the radius enlarged by the maximum m_PerHeightRadius offset - anything outside it will never be touched.
			float RadiusSq = (itr->m_Radius + 2) * (itr->m_Radius + 2);
			float DifX = BlockStartX - itr->m_X;  // substitution for faster calc
			float DifZ = BlockStartZ - itr->m_Z;  // substitution for faster calc
			for (int x = 0; x < cChunkDef::Width; x++) for (int z = 0; z < cChunkDef::Width; z++)
			{
				#ifdef _DEBUG
				// DEBUG: Make the roughravine shapepoints visible on a single layer (so that we can see with Minutor what's going on)
				if ((DifX + x == 0) && (DifZ + z == 0))
				{
					a_ChunkDesc.SetBlockType(x, 4, z, E_BLOCK_LAPIS_ORE);
				}
				#endif  // _DEBUG
				
				// If the column is outside the enlarged radius, bail out completely
				float DistSq = (DifX + x) * (DifX + x) + (DifZ + z) * (DifZ + z);
				if (DistSq > RadiusSq)
				{
					continue;
				}
				
				int Top = std::min((int)ceilf(itr->m_Top), +cChunkDef::Height);
				for (int y = std::max((int)floorf(itr->m_Bottom), 1); y <= Top; y++)
				{
					if ((itr->m_Radius + m_PerHeightRadius[y]) * (itr->m_Radius + m_PerHeightRadius[y]) < DistSq)
					{
						continue;
					}

					if (cBlockInfo::CanBeTerraformed(a_ChunkDesc.GetBlockType(x, y, z)))
					{
						a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_AIR);
					}
				}  // for y
			}  // for x, z - a_BlockTypes
		}  // for itr - m_Points[]
	}
开发者ID:ChriPiv,项目名称:MCServer,代码行数:58,代码来源:RoughRavines.cpp


示例8: ComposeTerrain

void cCompoGenClassic::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	/* The classic composition means:
		- 1 layer of grass, 3 of dirt and the rest stone, if the height > sealevel + beachheight
		- 3 sand and a 1 sandstone, rest stone if between sealevel and sealevel + beachheight
		- water from waterlevel to height, then 3 sand, 1 sandstone, the rest stone, if water depth < beachdepth
		- water from waterlevel, then 3 dirt, the rest stone otherwise
		- bedrock at the bottom
	*/

	a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);

	// The patterns to use for different situations, must be same length!
	const BLOCKTYPE PatternGround[] = {m_BlockTop,    m_BlockMiddle, m_BlockMiddle, m_BlockMiddle} ;
	const BLOCKTYPE PatternBeach[]  = {m_BlockBeach,  m_BlockBeach,  m_BlockBeach,  m_BlockBeachBottom} ;
	const BLOCKTYPE PatternOcean[]  = {m_BlockMiddle, m_BlockMiddle, m_BlockMiddle, m_BlockBottom} ;
	static int PatternLength = ARRAYCOUNT(PatternGround);
	ASSERT(ARRAYCOUNT(PatternGround) == ARRAYCOUNT(PatternBeach));
	ASSERT(ARRAYCOUNT(PatternGround) == ARRAYCOUNT(PatternOcean));
	
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int Height = a_ChunkDesc.GetHeight(x, z);
			const BLOCKTYPE * Pattern;
			if (Height > m_SeaLevel + m_BeachHeight)
			{
				Pattern = PatternGround;
			}
			else if (Height > m_SeaLevel - m_BeachDepth)
			{
				Pattern = PatternBeach;
			}
			else
			{
				Pattern = PatternOcean;
			}
			
			// Fill water from sealevel down to height (if any):
			for (int y = m_SeaLevel; y >= Height; --y)
			{
				a_ChunkDesc.SetBlockType(x, y, z, m_BlockSea);
			}
			
			// Fill from height till the bottom:
			for (int y = Height; y >= 1; y--)
			{
				a_ChunkDesc.SetBlockType(x, y, z, (Height - y < PatternLength) ? Pattern[Height - y] : m_BlockBottom);
			}
			
			// The last layer is always bedrock:
			a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
		}  // for x
	}  // for z
}
开发者ID:Solexid,项目名称:MCServer,代码行数:56,代码来源:CompoGen.cpp


示例9: GenStructures

void cStructGenWormNestCaves::GenStructures(cChunkDesc & a_ChunkDesc)
{
	int ChunkX = a_ChunkDesc.GetChunkX();
	int ChunkZ = a_ChunkDesc.GetChunkZ();
	cCaveSystems Caves;
	GetCavesForChunk(ChunkX, ChunkZ, Caves);
	for (cCaveSystems::const_iterator itr = Caves.begin(); itr != Caves.end(); ++itr)
	{
		(*itr)->ProcessChunk(ChunkX, ChunkZ, a_ChunkDesc.GetBlockTypes(), a_ChunkDesc.GetHeightMap());
	}  // for itr - Caves[]
}
开发者ID:Hillvith,项目名称:MCServer,代码行数:11,代码来源:Caves.cpp


示例10:

void cStructGenWormNestCaves::cCaveSystem::DrawIntoChunk(cChunkDesc & a_ChunkDesc)
{
	int ChunkX = a_ChunkDesc.GetChunkX();
	int ChunkZ = a_ChunkDesc.GetChunkZ();
	cChunkDef::BlockTypes & BlockTypes = a_ChunkDesc.GetBlockTypes();
	cChunkDef::HeightMap &  HeightMap  = a_ChunkDesc.GetHeightMap();
	for (cCaveTunnels::const_iterator itr = m_Tunnels.begin(), end = m_Tunnels.end(); itr != end; ++itr)
	{
		(*itr)->ProcessChunk(ChunkX, ChunkZ, BlockTypes, HeightMap);
	}  // for itr - m_Tunnels[]
}
开发者ID:Floppy012,项目名称:MCServer,代码行数:11,代码来源:Caves.cpp


示例11:

void cNoise3DComposable::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	GenerateNoiseArrayIfNeeded(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ());

	a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);

	// Make basic terrain composition:
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int LastAir = a_ChunkDesc.GetHeight(x, z) + 1;
			bool HasHadWater = false;
			for (int y = LastAir; y < m_SeaLevel; y++)
			{
				a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER);
			}
			for (int y = LastAir - 1; y > 0; y--)
			{
				if (m_NoiseArray[x + 17 * z + 17 * 17 * y] > m_AirThreshold)
				{
					// "air" part
					LastAir = y;
					if (y < m_SeaLevel)
					{
						a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STATIONARY_WATER);
						HasHadWater = true;
					}
					continue;
				}
				// "ground" part:
				if (LastAir - y > 4)
				{
					a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_STONE);
					continue;
				}
				if (HasHadWater)
				{
					a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND);
				}
				else
				{
					a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT);
				}
			}  // for y
			a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
		}  // for x
	}  // for z
}
开发者ID:Noraaron1,项目名称:MCServer,代码行数:49,代码来源:Noise3DGenerator.cpp


示例12: ComposeTerrain

void cDistortedHeightmap::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	// Prepare the internal state for generating this chunk:
	PrepareState(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ());

	// Compose:
	a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			ComposeColumn(a_ChunkDesc, x, z);
		}  // for x
	}  // for z
}
开发者ID:rwcherry,项目名称:MCServer,代码行数:15,代码来源:DistortedHeightmap.cpp


示例13:

void cNoise3DGenerator::DoGenerate(int a_ChunkX, int a_ChunkZ, cChunkDesc & a_ChunkDesc)
{
	NOISE_DATATYPE Noise[17 * 257 * 17];
	GenerateNoiseArray(a_ChunkX, a_ChunkZ, Noise);

	// Output noise into chunk:
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int y = 0; y < cChunkDef::Height; y++)
		{
			int idx = z * 17 * 257 + y * 17;
			for (int x = 0; x < cChunkDef::Width; x++)
			{
				NOISE_DATATYPE n = Noise[idx++];
				BLOCKTYPE BlockType;
				if (n > m_AirThreshold)
				{
					BlockType = (y > m_SeaLevel) ? E_BLOCK_AIR : E_BLOCK_STATIONARY_WATER;
				}
				else
				{
					BlockType = E_BLOCK_STONE;
				}
				a_ChunkDesc.SetBlockType(x, y, z, BlockType);
			}
		}
	}

	UpdateHeightmap(a_ChunkDesc);
	ComposeTerrain (a_ChunkDesc);
}
开发者ID:DjKiDD,项目名称:MCServer,代码行数:31,代码来源:Noise3DGenerator.cpp


示例14: switch

void cNoise3DGenerator::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	// Make basic terrain composition:
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			int LastAir = a_ChunkDesc.GetHeight(x, z) + 1;
			bool HasHadWater = false;
			for (int y = LastAir - 1; y > 0; y--)
			{
				switch (a_ChunkDesc.GetBlockType(x, y, z))
				{
					case E_BLOCK_AIR:
					{
						LastAir = y;
						break;
					}
					case E_BLOCK_STONE:
					{
						if (LastAir - y > 3)
						{
							break;
						}
						if (HasHadWater)
						{
							a_ChunkDesc.SetBlockType(x, y, z, E_BLOCK_SAND);
						}
						else
						{
							a_ChunkDesc.SetBlockType(x, y, z, (LastAir == y + 1) ? E_BLOCK_GRASS : E_BLOCK_DIRT);
						}
						break;
					}
					case E_BLOCK_STATIONARY_WATER:
					{
						LastAir = y;
						HasHadWater = true;
						break;
					}
				}  // switch (GetBlockType())
			}  // for y
			a_ChunkDesc.SetBlockType(x, 0, z, E_BLOCK_BEDROCK);
		}  // for x
	}  // for z
}
开发者ID:DjKiDD,项目名称:MCServer,代码行数:46,代码来源:Noise3DGenerator.cpp


示例15: ComposeTerrain

void cEndGen::ComposeTerrain(cChunkDesc & a_ChunkDesc)
{
	if (IsChunkOutsideRange(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ()))
	{
		a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
		return;
	}

	PrepareState(a_ChunkDesc.GetChunkX(), a_ChunkDesc.GetChunkZ());

	int MaxY = std::min((int)(1.75 * m_IslandSizeY + 1), cChunkDef::Height - 1);
	for (int z = 0; z < cChunkDef::Width; z++)
	{
		for (int x = 0; x < cChunkDef::Width; x++)
		{
			for (int y = MaxY; y > 0; y--)
			{
				if (m_NoiseArray[y * 17 * 17 + z * 17 + x] <= 0)
				{
					a_ChunkDesc.SetBlockTypeMeta(x, y, z, E_BLOCK_END_STONE, 0);
				}
				else
				{
					a_ChunkDesc.SetBlockTypeMeta(x, y, z, E_BLOCK_AIR, 0);
				}
			}  // for y
		}  // for x
	}  // for z
}
开发者ID:stpinker,项目名称:MCServer,代码行数:29,代码来源:EndGen.cpp


示例16: DoGenerate

void cComposableGenerator::DoGenerate(int a_ChunkX, int a_ChunkZ, cChunkDesc & a_ChunkDesc)
{
	if (a_ChunkDesc.IsUsingDefaultBiomes())
	{
		m_BiomeGen->GenBiomes(a_ChunkX, a_ChunkZ, a_ChunkDesc.GetBiomeMap());
	}
	
	if (a_ChunkDesc.IsUsingDefaultHeight())
	{
		m_HeightGen->GenHeightMap(a_ChunkX, a_ChunkZ, a_ChunkDesc.GetHeightMap());
	}
	
	bool ShouldUpdateHeightmap = false;
	if (a_ChunkDesc.IsUsingDefaultComposition())
	{
		m_CompositionGen->ComposeTerrain(a_ChunkDesc);
		ShouldUpdateHeightmap = true;
	}

	if (a_ChunkDesc.IsUsingDefaultFinish())
	{
		for (cFinishGenList::iterator itr = m_FinishGens.begin(); itr != m_FinishGens.end(); ++itr)
		{
			(*itr)->GenFinish(a_ChunkDesc);
		}  // for itr - m_FinishGens[]
		ShouldUpdateHeightmap = true;
	}
	
	if (ShouldUpdateHeightmap)
	{
		a_ChunkDesc.UpdateHeightmap();
	}
}
开发者ID:Kortak,项目名称:MCServer,代码行数:33,代码来源:ComposableGenerator.cpp


示例17: DoGenerate

void cComposableGenerator::DoGenerate(int a_ChunkX, int a_ChunkZ, cChunkDesc & a_ChunkDesc)
{
	if (a_ChunkDesc.IsUsingDefaultBiomes())
	{
		m_BiomeGen->GenBiomes(a_ChunkX, a_ChunkZ, a_ChunkDesc.GetBiomeMap());
	}
	
	if (a_ChunkDesc.IsUsingDefaultHeight())
	{
		m_HeightGen->GenHeightMap(a_ChunkX, a_ChunkZ, a_ChunkDesc.GetHeightMap());
	}
	
	if (a_ChunkDesc.IsUsingDefaultComposition())
	{
		m_CompositionGen->ComposeTerrain(a_ChunkDesc);
	}

	if (a_ChunkDesc.IsUsingDefaultStructures())
	{	
		for (cStructureGenList::iterator itr = m_StructureGens.begin(); itr != m_StructureGens.end(); ++itr)
		{
			(*itr)->GenStructures(a_ChunkDesc);
		}   // for itr - m_StructureGens[]
	}
	
	if (a_ChunkDesc.IsUsingDefaultFinish())
	{
		for (cFinishGenList::iterator itr = m_FinishGens.begin(); itr != m_FinishGens.end(); ++itr)
		{
			(*itr)->GenFinish(a_ChunkDesc);
		}  // for itr - m_FinishGens[]
	}
}
开发者ID:Xury,项目名称:MCServer,代码行数:33,代码来源:ComposableGenerator.cpp


示例18: TryPlaceSpring

bool cFinishGenFluidSprings::TryPlaceSpring(cChunkDesc & a_ChunkDesc, int x, int y, int z)
{
	// In order to place a spring, it needs exactly one of the XZ neighbors or a below neighbor to be air
	// Also, its neighbor on top of it must be non-air
	if (a_ChunkDesc.GetBlockType(x, y + 1, z) == E_BLOCK_AIR)
	{
		return false;
	}

	static const struct
	{
		int x, y, z;
	} Coords[] =
	{
		{-1,  0,  0},
		{ 1,  0,  0},
		{ 0, -1,  0},
		{ 0,  0, -1},
		{ 0,  0,  1},
	} ;
	int NumAirNeighbors = 0;
	for (size_t i = 0; i < ARRAYCOUNT(Coords); i++)
	{
		switch (a_ChunkDesc.GetBlockType(x + Coords[i].x, y + Coords[i].y, z + Coords[i].z))
		{
			case E_BLOCK_AIR:
			{
				NumAirNeighbors += 1;
				if (NumAirNeighbors > 1)
				{
					return false;
				}
			}
		}
	}
	if (NumAirNeighbors == 0)
	{
		return false;
	}

	// Has exactly one air neighbor, place a spring:
	a_ChunkDesc.SetBlockTypeMeta(x, y, z, m_Fluid, 0);
	return true;
}
开发者ID:jammet,项目名称:MCServer,代码行数:44,代码来源:FinishGen.cpp


示例19: TryAddSugarcane

bool cFinishGenSprinkleFoliage::TryAddSugarcane(cChunkDesc & a_ChunkDesc, int a_RelX, int a_RelY, int a_RelZ)
{
	// We'll be doing comparison to neighbors, so require the coords to be 1 block away from the chunk edges:
	if (
		(a_RelX < 1) || (a_RelX >= cChunkDef::Width  - 1) ||
		(a_RelY < 1) || (a_RelY >= cChunkDef::Height - 2) ||
		(a_RelZ < 1) || (a_RelZ >= cChunkDef::Width  - 1)
	)
	{
		return false;
	}

	// Only allow dirt, grass or sand below sugarcane:
	switch (a_ChunkDesc.GetBlockType(a_RelX, a_RelY, a_RelZ))
	{
		case E_BLOCK_DIRT:
		case E_BLOCK_GRASS:
		case E_BLOCK_SAND:
		{
			break;
		}
		default:
		{
			return false;
		}
	}

	// Water is required next to the block below the sugarcane:
	if (
		!IsWater(a_ChunkDesc.GetBlockType(a_RelX - 1, a_RelY, a_RelZ)) &&
		!IsWater(a_ChunkDesc.GetBlockType(a_RelX + 1, a_RelY, a_RelZ)) &&
		!IsWater(a_ChunkDesc.GetBlockType(a_RelX,     a_RelY, a_RelZ - 1)) &&
		!IsWater(a_ChunkDesc.GetBlockType(a_RelX,     a_RelY, a_RelZ + 1))
	)
	{
		return false;
	}

	// All conditions met, place a sugarcane here:
	a_ChunkDesc.SetBlockType(a_RelX, a_RelY + 1, a_RelZ, E_BLOCK_SUGARCANE);
	return true;
}
开发者ID:jammet,项目名称:MCServer,代码行数:42,代码来源:FinishGen.cpp


示例20: ComposeTerrain

	// cTerrainCompositionGen overrides:
	virtual void ComposeTerrain(cChunkDesc & a_ChunkDesc, const cChunkDesc::Shape & a_Shape) override
	{
		a_ChunkDesc.FillBlocks(E_BLOCK_AIR, 0);
		for (int z = 0; z < cChunkDef::Width; z++)
		{
			for (int x = 0; x < cChunkDef::Width; x++)
			{
				ComposeColumn(a_ChunkDesc, x, z, &(a_Shape[x * 256 + z * 16 * 256]));
			}  // for x
		}  // for z
	}
开发者ID:36451,项目名称:MCServer,代码行数:12,代码来源:CompoGenBiomal.cpp



注:本文中的cChunkDesc类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台,相关代码片段筛选自各路编程大神贡献的开源项目,源码版权归原作者所有,传播和使用请参考对应项目的License;未经允许,请勿转载。


鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
C++ cChunkInterface类代码示例发布时间:2022-05-31
下一篇:
C++ cChunk类代码示例发布时间:2022-05-31
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap