• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ XnProperty类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中XnProperty类的典型用法代码示例。如果您正苦于以下问题：C++ XnProperty类的具体用法？C++ XnProperty怎么用？C++ XnProperty使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了XnProperty类的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: XN_IS_STATUS_OK

XnStatus XnServerSensorInvoker::RegisterToProps(XnPropertySet* pProps)
{
	XnStatus nRetVal = XN_STATUS_OK;
	XnCallbackHandle hDummy = NULL;

	for (XnPropertySetData::Iterator itMod = pProps->pData->Begin(); itMod != pProps->pData->End(); ++itMod)
	{
		XnActualPropertiesHash* pHash = itMod->Value();

		XnDeviceModule* pModule;
		nRetVal = m_sensor.FindModule(itMod->Key(), &pModule);
		XN_IS_STATUS_OK(nRetVal);

		for (XnActualPropertiesHash::Iterator itProp = pHash->Begin(); itProp != pHash->End(); ++itProp)
		{
			XnProperty* pProp;
			nRetVal = pModule->GetProperty(itProp->Key(), &pProp);
			XN_IS_STATUS_OK(nRetVal);

			// no need to keep the handle. We only want to unregister when the stream is destroyed, and then
			// it happens anyway.
			nRetVal = pProp->OnChangeEvent().Register(PropertyChangedCallback, this, hDummy);
			XN_IS_STATUS_OK(nRetVal);
		}
	}

	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:28，代码来源:XnServerSensorInvoker.cpp


示例2: GetName

XnStatus XnDeviceModule::LoadConfigFromFile(const XnChar* csINIFilePath, const XnChar* strSectionName /* = NULL */)
{
	XnStatus nRetVal = XN_STATUS_OK;

	if (strSectionName == NULL)
	{
		strSectionName = GetName();
	}

	xnLogVerbose(XN_MASK_DDK, "Configuring module '%s' from section '%s' in file '%s'...", GetName(), strSectionName, csINIFilePath);

	for (XnPropertiesHash::Iterator it = m_Properties.Begin(); it != m_Properties.End(); ++it)
	{
		XnProperty* pProp = it->Value();

		// only read writable properties
		if (!pProp->IsReadOnly())
		{
			nRetVal = pProp->ReadValueFromFile(csINIFilePath, strSectionName);
			XN_IS_STATUS_OK(nRetVal);
		}
	}

	xnLogInfo(XN_MASK_DDK, "Module '%s' configuration was loaded from file.", GetName());

	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:27，代码来源:XnDeviceModule.cpp


示例3: UnsafeSetProperties

XnStatus XnDeviceModuleHolder::UnsafeSetProperties(const XnActualPropertiesHash& props)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	for (XnActualPropertiesHash::ConstIterator it = props.Begin(); it != props.End(); ++it)
	{
		XnProperty* pRequestProp = it->Value();
		XnProperty* pProp = NULL;

		// check if property already exist
		nRetVal = m_pModule->GetProperty(pRequestProp->GetName(), &pProp);
		if (nRetVal == XN_STATUS_DEVICE_PROPERTY_DONT_EXIST)
		{
			// property doesn't exist. create it now
			nRetVal = CreateProperty(pRequestProp);
			XN_IS_STATUS_OK(nRetVal);
		}
		else if (nRetVal == XN_STATUS_OK)
		{
			// property exists. Change its value
			nRetVal = UnsafeSetProperty(pRequestProp, pProp);
			XN_IS_STATUS_OK(nRetVal);
		}
		else
		{
			// error
			return (nRetVal);
		}

	} // props loop
	
	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:33，代码来源:XnDeviceModuleHolder.cpp


示例4: sizeof

XnStatus XnShiftToDepthStreamHelper::InitShiftToDepth()
{
	XnStatus nRetVal = XN_STATUS_OK;

	// register to any shift-to-depth property (so tables can be updated if needed)
	const XnChar* propNames[] = 
	{
		XN_STREAM_PROPERTY_MIN_DEPTH,
		XN_STREAM_PROPERTY_MAX_DEPTH,
		XN_STREAM_PROPERTY_CONST_SHIFT,
		XN_STREAM_PROPERTY_PIXEL_SIZE_FACTOR,
		XN_STREAM_PROPERTY_PARAM_COEFF,
		XN_STREAM_PROPERTY_SHIFT_SCALE,
		XN_STREAM_PROPERTY_ZERO_PLANE_DISTANCE,
		XN_STREAM_PROPERTY_ZERO_PLANE_DISTANCE,
		XN_STREAM_PROPERTY_EMITTER_DCMOS_DISTANCE
	};

	XnUInt32 nPropCount = sizeof(propNames) / sizeof(const XnChar*);

	XnCallbackHandle hDummy;

	XnProperty* pProperty = NULL;
	for (XnUInt32 i = 0; i < nPropCount; ++i)
	{
		nRetVal = m_pModule->GetProperty(propNames[i], &pProperty);
		XN_IS_STATUS_OK(nRetVal);

		nRetVal = pProperty->OnChangeEvent().Register(ShiftToDepthPropertyValueChangedCallback, this, hDummy);
		XN_IS_STATUS_OK(nRetVal);
	}

	// register for tables size properties
	nRetVal = m_pModule->GetProperty(XN_STREAM_PROPERTY_MAX_SHIFT, &pProperty);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProperty->OnChangeEvent().Register(DeviceS2DTablesSizeChangedCallback, this, hDummy);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_pModule->GetProperty(XN_STREAM_PROPERTY_DEVICE_MAX_DEPTH, &pProperty);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProperty->OnChangeEvent().Register(DeviceS2DTablesSizeChangedCallback, this, hDummy);
	XN_IS_STATUS_OK(nRetVal);

	// now init the tables
	XnShiftToDepthConfig Config;
	nRetVal = GetShiftToDepthConfig(Config);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = XnShiftToDepthInit(&m_ShiftToDepthTables, &Config);
	XN_IS_STATUS_OK(nRetVal);

	// replace tables buffers
	m_ShiftToDepthTable.ReplaceBuffer(m_ShiftToDepthTables.pShiftToDepthTable, m_ShiftToDepthTables.nShiftsCount * sizeof(XnDepthPixel));
	m_DepthToShiftTable.ReplaceBuffer(m_ShiftToDepthTables.pDepthToShiftTable, m_ShiftToDepthTables.nDepthsCount * sizeof(XnUInt16));

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:59，代码来源:XnShiftToDepthStreamHelper.cpp


示例5: GetPropertyType

XnStatus XnDeviceModule::GetPropertyType(const XnChar* strName, XnPropertyType* pnType) const
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XnProperty* pProp;
	nRetVal = GetProperty(strName, &pProp);
	XN_IS_STATUS_OK(nRetVal);

	*pnType = pProp->GetType();
	
	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:12，代码来源:XnDeviceModule.cpp


示例6: UnregisterFromOnPropertyValueChanged

XnStatus XnDeviceModule::UnregisterFromOnPropertyValueChanged(const XnChar* strName, XnCallbackHandle hCallback)
{
	XnStatus nRetVal = XN_STATUS_OK;

	XnProperty* pProp;
	nRetVal = GetProperty(strName, &pProp);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProp->OnChangeEvent().Unregister(hCallback);
	XN_IS_STATUS_OK(nRetVal);

	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:13，代码来源:XnDeviceModule.cpp


示例7: RegisterForOnPropertyValueChanged

XnStatus XnDeviceModule::RegisterForOnPropertyValueChanged(const XnChar* strName, XnProperty::OnValueChangedHandler pFunc, void* pCookie, XnCallbackHandle& hCallback)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	XnProperty* pProp;
	nRetVal = GetProperty(strName, &pProp);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProp->OnChangeEvent().Register(pFunc, pCookie, hCallback);
	XN_IS_STATUS_OK(nRetVal);
	
	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:13，代码来源:XnDeviceModule.cpp


示例8: XnPropertySetCloneModule

XN_DDK_API XnStatus XnPropertySetCloneModule(const XnPropertySet* pSource, XnPropertySet* pDest, const XnChar* strModule, const XnChar* strNewName)
{
	XnStatus nRetVal = XN_STATUS_OK;

	XnActualPropertiesHash* pModuleProps = NULL;
	nRetVal = pSource->pData->Get(strModule, pModuleProps);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = XnPropertySetAddModule(pDest, strNewName);
	XN_IS_STATUS_OK(nRetVal);

	for (XnActualPropertiesHash::ConstIterator it = pModuleProps->Begin(); it != pModuleProps->End(); ++it)
	{
		XnProperty* pProp = it->Value();
		switch (pProp->GetType())
		{
		case XN_PROPERTY_TYPE_INTEGER:
			{
				XnActualIntProperty* pIntProp = (XnActualIntProperty*)pProp;
				nRetVal = XnPropertySetAddIntProperty(pDest, strNewName, pIntProp->GetName(), pIntProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_REAL:
			{
				XnActualRealProperty* pRealProp = (XnActualRealProperty*)pProp;
				nRetVal = XnPropertySetAddRealProperty(pDest, strNewName, pRealProp->GetName(), pRealProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_STRING:
			{
				XnActualStringProperty* pStrProp = (XnActualStringProperty*)pProp;
				nRetVal = XnPropertySetAddStringProperty(pDest, strNewName, pStrProp->GetName(), pStrProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_GENERAL:
			{
				XnActualGeneralProperty* pGenProp = (XnActualGeneralProperty*)pProp;
				nRetVal = XnPropertySetAddGeneralProperty(pDest, strNewName, pGenProp->GetName(), &pGenProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		default:
			XN_LOG_WARNING_RETURN(XN_STATUS_ERROR, XN_MASK_DDK, "Unknown property type: %d", pProp->GetType());
		}
	}

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:51，代码来源:XnPropertySet.cpp


示例9: XnPropertySetEnumeratorGetCurrentPropertyInfo

XN_DDK_API XnStatus XnPropertySetEnumeratorGetCurrentPropertyInfo(const XnPropertySetEnumerator* pEnumerator, XnPropertyType* pnType, const XnChar** pstrModule, const XnChar** pstrProp)
{
	XN_VALIDATE_INPUT_PTR(pEnumerator);
	XN_VALIDATE_OUTPUT_PTR(pnType);
	XN_VALIDATE_OUTPUT_PTR(pstrModule);
	XN_VALIDATE_OUTPUT_PTR(pstrProp);

	XnProperty* pProp = pEnumerator->itProp->Value();
	*pnType = pProp->GetType();
	*pstrModule = pProp->GetModule();
	*pstrProp = pProp->GetName();

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:14，代码来源:XnPropertySet.cpp


示例10: XnPropertySetEnumeratorGetGeneralValue

XN_DDK_API XnStatus XnPropertySetEnumeratorGetGeneralValue(const XnPropertySetEnumerator* pEnumerator, XnGeneralBuffer* pgbValue)
{
	XN_VALIDATE_INPUT_PTR(pEnumerator);
	XN_VALIDATE_OUTPUT_PTR(pgbValue);

	XnProperty* pPropBase = pEnumerator->itProp->Value();
	if (pPropBase->GetType() != XN_PROPERTY_TYPE_GENERAL)
	{
		return XN_STATUS_DEVICE_PROPERTY_BAD_TYPE;
	}

	XnActualGeneralProperty* pProp = (XnActualGeneralProperty*)pPropBase;
	*pgbValue = pProp->GetValue();

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:16，代码来源:XnPropertySet.cpp


示例11: XnPropertySetEnumeratorGetStringValue

XN_DDK_API XnStatus XnPropertySetEnumeratorGetStringValue(const XnPropertySetEnumerator* pEnumerator, const XnChar** pstrValue)
{
	XN_VALIDATE_INPUT_PTR(pEnumerator);
	XN_VALIDATE_OUTPUT_PTR(pstrValue);

	XnProperty* pPropBase = pEnumerator->itProp->Value();
	if (pPropBase->GetType() != XN_PROPERTY_TYPE_STRING)
	{
		return XN_STATUS_DEVICE_PROPERTY_BAD_TYPE;
	}

	XnActualStringProperty* pProp = (XnActualStringProperty*)pPropBase;
	*pstrValue = pProp->GetValue();

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:16，代码来源:XnPropertySet.cpp


示例12: XnPropertySetEnumeratorGetIntValue

XN_DDK_API XnStatus XnPropertySetEnumeratorGetIntValue(const XnPropertySetEnumerator* pEnumerator, XnUInt64* pnValue)
{
	XN_VALIDATE_INPUT_PTR(pEnumerator);
	XN_VALIDATE_OUTPUT_PTR(pnValue);

	XnProperty* pPropBase = pEnumerator->itProp->Value();
	if (pPropBase->GetType() != XN_PROPERTY_TYPE_INTEGER)
	{
		return XN_STATUS_DEVICE_PROPERTY_BAD_TYPE;
	}

	XnActualIntProperty* pProp = (XnActualIntProperty*)pPropBase;
	*pnValue = pProp->GetValue();

	return (XN_STATUS_OK);
}
开发者ID:02031991，项目名称:Sensor，代码行数:16，代码来源:XnPropertySet.cpp


示例13: XnPropertySetEnumeratorGetRealValue

XnStatus XnPropertySetEnumeratorGetRealValue(const XnPropertySetEnumerator* pEnumerator, XnDouble* pdValue)
{
	XN_VALIDATE_INPUT_PTR(pEnumerator);
	XN_VALIDATE_OUTPUT_PTR(pdValue);

	XnProperty* pPropBase = pEnumerator->itProp->Value();
	if (pPropBase->GetType() != XN_PROPERTY_TYPE_REAL)
	{
		return XN_STATUS_DEVICE_PROPERTY_BAD_TYPE;
	}

	XnActualRealProperty* pProp = (XnActualRealProperty*)pPropBase;
	*pdValue = pProp->GetValue();

	return (XN_STATUS_OK);
}
开发者ID:1170390，项目名称:OpenNI2，代码行数:16，代码来源:XnPropertySet.cpp


示例14: GetPropertyImpl

XnStatus XnDeviceModule::GetPropertyImpl(const XnChar* Name, XnPropertyType Type, XnProperty** ppProperty) const
{
	*ppProperty = NULL;

	XnProperty* pProperty;
	if (XN_STATUS_NO_MATCH == m_Properties.Get(Name, pProperty))
	{
		return XN_STATUS_DEVICE_PROPERTY_DONT_EXIST;
	}

	if (pProperty->GetType() != Type)
	{
		return XN_STATUS_DEVICE_PROPERTY_BAD_TYPE;
	}

	*ppProperty = pProperty;
	return XN_STATUS_OK;
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:18，代码来源:XnDeviceModule.cpp


示例15: UnsafeBatchConfig

XnStatus XnDeviceModule::UnsafeBatchConfig(const XnActualPropertiesHash& props)
{
	XnStatus nRetVal = XN_STATUS_OK;

	for (XnActualPropertiesHash::ConstIterator it = props.Begin(); it != props.End(); ++it)
	{
		XnProperty* pRequestProp = it->Value();
		switch (pRequestProp->GetType())
		{
		case XN_PROPERTY_TYPE_INTEGER:
			{
				XnActualIntProperty* pProp = (XnActualIntProperty*)pRequestProp;
				nRetVal = UnsafeUpdateProperty(pProp->GetName(), pProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_REAL:
			{
				XnActualRealProperty* pProp = (XnActualRealProperty*)pRequestProp;
				nRetVal = UnsafeUpdateProperty(pProp->GetName(), pProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_STRING:
			{
				XnActualStringProperty* pProp = (XnActualStringProperty*)pRequestProp;
				nRetVal = UnsafeUpdateProperty(pProp->GetName(), pProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		case XN_PROPERTY_TYPE_GENERAL:
			{
				XnActualGeneralProperty* pProp = (XnActualGeneralProperty*)pRequestProp;
				nRetVal = UnsafeUpdateProperty(pProp->GetName(), pProp->GetValue());
				XN_IS_STATUS_OK(nRetVal);
				break;
			}
		default:
			XN_LOG_WARNING_RETURN(XN_STATUS_ERROR, XN_MASK_DDK, "Unknown property type: %d\n", pRequestProp->GetType());
		} // type switch
	} // props loop

	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:44，代码来源:XnDeviceModule.cpp


示例16: XnPropertySetAddModule

XnStatus XnDeviceModule::GetAllProperties(XnPropertySet* pSet) const
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// add the module
	nRetVal = XnPropertySetAddModule(pSet, GetName());
	XN_IS_STATUS_OK(nRetVal);

	// now add all properties
	for (XnPropertiesHash::ConstIterator it = m_Properties.Begin(); it != m_Properties.End(); ++it)
	{
		XnProperty* pProperty = it->Value();

		if (pProperty->IsActual())
		{
			nRetVal = pProperty->AddToPropertySet(pSet);
			XN_IS_STATUS_OK(nRetVal);
		}
	}
	
	return (XN_STATUS_OK);
}
开发者ID:DogfishLab88，项目名称:debian-openni-sensor-avin2-sensorkinect，代码行数:22，代码来源:XnDeviceModule.cpp


示例17: IsStream

XnBool XnDeviceBase::IsStream(XnDeviceModule* pModule)
{
	XnProperty* pProperty;
	XnStatus nRetVal = pModule->GetProperty(XN_STREAM_PROPERTY_IS_STREAM, &pProperty);
	if (nRetVal != XN_STATUS_OK)
		return FALSE;

	if (pProperty->GetType() != XN_PROPERTY_TYPE_INTEGER)
		return FALSE;

	XnIntProperty* pIntProperty = (XnIntProperty*)pProperty;

	XnUInt64 nValue;
	nRetVal = pIntProperty->GetValue(&nValue);
	if (nRetVal != XN_STATUS_OK)
	{
		xnLogError(XN_MASK_DDK, "Failed getting the value of the IsStream property: %s", xnGetStatusString(nRetVal));
		return FALSE;
	}

	return (XnBool)nValue;
}
开发者ID:0pascal0，项目名称:SensorKinect，代码行数:22，代码来源:XnDeviceBase.cpp


示例18: xnLogVerbose

XnStatus XnShiftToDepthStreamHelper::InitShiftToDepth()
{
	XnStatus nRetVal = XN_STATUS_OK;

	xnLogVerbose("S2D", "test1");
	// register to any shift-to-depth property (so tables can be updated if needed)
	XnUInt32 propIds[] = 
	{
		XN_STREAM_PROPERTY_MIN_DEPTH,
		XN_STREAM_PROPERTY_MAX_DEPTH,
		XN_STREAM_PROPERTY_CONST_SHIFT,
		XN_STREAM_PROPERTY_PIXEL_SIZE_FACTOR,
		XN_STREAM_PROPERTY_PARAM_COEFF,
		XN_STREAM_PROPERTY_SHIFT_SCALE,
		XN_STREAM_PROPERTY_ZERO_PLANE_DISTANCE,
		XN_STREAM_PROPERTY_ZERO_PLANE_DISTANCE,
		XN_STREAM_PROPERTY_EMITTER_DCMOS_DISTANCE,
		XN_STREAM_PROPERTY_OUTPUT_FORMAT,
		XN_STREAM_PROPERTY_CUSTOM_S2D_TABLE_ID
	};

	xnLogVerbose("S2D", "test2");
	
	
	XnUInt32 nPropCount = sizeof(propIds) / sizeof(propIds[0]);

	xnLogVerbose("S2D", "test3");
	
	XnCallbackHandle hDummy;

	XnProperty* pProperty = NULL;
	for (XnUInt32 i = 0; i < nPropCount; ++i)
	{
	  xnLogVerbose("S2D", "test4");
		nRetVal = m_pModule->GetProperty(propIds[i], &pProperty);
		xnLogVerbose("S2D", "test5 %s", xnGetStatusString(nRetVal));
		XN_IS_STATUS_OK(nRetVal);
		
	  
		nRetVal = pProperty->OnChangeEvent().Register(ShiftToDepthPropertyValueChangedCallback, this, hDummy);
		XN_IS_STATUS_OK(nRetVal);
		xnLogVerbose("S2D", "test6");
	}

// 	XnUInt64 CustomTableID = ((XnActualIntProperty*)pProperty)->GetValue();
//    	xnLogVerbose("S2D", "S2D custom table ID: %d", CustomTableID);
	
	// register for tables size properties
	nRetVal = m_pModule->GetProperty(XN_STREAM_PROPERTY_MAX_SHIFT, &pProperty);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProperty->OnChangeEvent().Register(DeviceS2DTablesSizeChangedCallback, this, hDummy);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_pModule->GetProperty(XN_STREAM_PROPERTY_DEVICE_MAX_DEPTH, &pProperty);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProperty->OnChangeEvent().Register(DeviceS2DTablesSizeChangedCallback, this, hDummy);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = m_pModule->GetProperty(XN_STREAM_PROPERTY_OUTPUT_FORMAT, &pProperty);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = pProperty->OnChangeEvent().Register(DeviceS2DTablesSizeChangedCallback, this, hDummy);
	XN_IS_STATUS_OK(nRetVal);
	
	// now init the tables
	XnShiftToDepthConfig Config;
	nRetVal = GetShiftToDepthConfig(Config);
	XN_IS_STATUS_OK(nRetVal);

	nRetVal = XnShiftToDepthInit(&m_ShiftToDepthTables, &Config);
	XN_IS_STATUS_OK(nRetVal);

	// replace tables buffers
	m_ShiftToDepthTable.ReplaceBuffer(m_ShiftToDepthTables.pShiftToDepthTable, m_ShiftToDepthTables.nShiftsCount * sizeof(OniDepthPixel));
	m_DepthToShiftTable.ReplaceBuffer(m_ShiftToDepthTables.pDepthToShiftTable, m_ShiftToDepthTables.nDepthsCount * sizeof(XnUInt16));

	return (XN_STATUS_OK);
}
开发者ID:jan-vitek，项目名称:OpenNI2，代码行数:80，代码来源:XnShiftToDepthStreamHelper.cpp


示例19: return

XnStatus XnFileDevice::HandleNewStream(const XnChar *strType, const XnChar *strName, const XnActualPropertiesHash *pInitialValues)
{
    XnStatus nRetVal = XN_STATUS_OK;

    // check if we need to ignore that (stream was not removed upon Rewind).
    XnNodeInfoMap::Iterator it = m_ignoreNewNodes.End();
    if (m_ignoreNewNodes.Find(strName, it) == XN_STATUS_OK)
    {
        // ignore
        return (XN_STATUS_OK);
    }

    XnProductionNodeType type = GetNodeType(strType);
    if (type == -1)
    {
        XN_LOG_WARNING_RETURN(XN_STATUS_CORRUPT_FILE, XN_MASK_FILE, "Invalid node type: %s", strType);
    }

    // find compression type
    XnActualIntProperty* pComp = NULL;
    nRetVal = pInitialValues->Get(XN_STREAM_PROPERTY_COMPRESSION, (XnProperty*&)pComp);
    XN_IS_STATUS_OK(nRetVal);

    XnCodecID codecID = XnCodec::GetCodecIDFromCompressionFormat((XnCompressionFormats)pComp->GetValue());
    if (codecID == XN_CODEC_NULL)
    {
        XN_LOG_WARNING_RETURN(XN_STATUS_CORRUPT_FILE, XN_MASK_FILE, "Invalid compression type: %llu", pComp->GetValue());
    }

    // notify we have a new node
    nRetVal = m_pNotifications->OnNodeAdded(m_pNotificationsCookie, strName, type, codecID);
    XN_IS_STATUS_OK(nRetVal);

    // we support the mirror capability
    nRetVal = m_pNotifications->OnNodeIntPropChanged(m_pNotificationsCookie, strName, XN_CAPABILITY_MIRROR, 1);
    XN_IS_STATUS_OK(nRetVal);

    // we support the extended serialization capability
    nRetVal = m_pNotifications->OnNodeIntPropChanged(m_pNotificationsCookie, strName, XN_CAPABILITY_EXTENDED_SERIALIZATION, 1);
    XN_IS_STATUS_OK(nRetVal);

    // now write state
    for (XnActualPropertiesHash::ConstIterator it = pInitialValues->Begin(); it != pInitialValues->End(); ++it)
    {
        XnProperty* pProp = it->Value();

        switch (pProp->GetType())
        {
        case XN_PROPERTY_TYPE_INTEGER:
        {
            XnActualIntProperty* pIntProp = (XnActualIntProperty*)pProp;
            nRetVal = HandleIntProperty(strName, pProp->GetName(), pIntProp->GetValue());
        }
        break;
        case XN_PROPERTY_TYPE_REAL:
        {
            XnActualRealProperty* pRealProp = (XnActualRealProperty*)pProp;
            nRetVal = HandleRealProperty(strName, pProp->GetName(), pRealProp->GetValue());
        }
        break;
        case XN_PROPERTY_TYPE_STRING:
        {
            XnActualStringProperty* pStrProp = (XnActualStringProperty*)pProp;
            nRetVal = HandleStringProperty(strName, pProp->GetName(), pStrProp->GetValue());
        }
        break;
        case XN_PROPERTY_TYPE_GENERAL:
        {
            XnActualGeneralProperty* pGenProp = (XnActualGeneralProperty*)pProp;
            nRetVal = HandleGeneralProperty(strName, pProp->GetName(), pGenProp->GetValue());
        }
        break;
        default:
            XN_LOG_WARNING_RETURN(XN_STATUS_ERROR, XN_MASK_FILE, "Unknown property type: %d", pProp->GetType());
        }

        XN_IS_STATUS_OK(nRetVal);
    }

    // at this stage, a node should exist with this name
    xn::ProductionNode node;
    nRetVal = m_context.GetProductionNodeByName(strName, node);
    XN_IS_STATUS_OK(nRetVal);

    // S2D & RW
    if (type == XN_NODE_TYPE_DEPTH)
    {
        nRetVal = UpdateS2DTables(xn::DepthGenerator(node));
        XN_IS_STATUS_OK(nRetVal);

        nRetVal = UpdateRWData(xn::DepthGenerator(node));
        XN_IS_STATUS_OK(nRetVal);
    }

    // notify end-of-state
    nRetVal = m_pNotifications->OnNodeStateReady(m_pNotificationsCookie, strName);
    XN_IS_STATUS_OK(nRetVal);

    // add it to the map
    XnNodeInfo nodeInfo = {0};
//.........这里部分代码省略.........
开发者ID:RikeshThapa，项目名称:VirtueX，代码行数:101，代码来源:XnFileDevice.cpp


示例20: XN_PROPERTY_SET_CREATE_ON_STACK

XnStatus XnSensorProductionNode::NotifyExState(XnNodeNotifications* pNotifications, void* pCookie)
{
	XnStatus nRetVal = XN_STATUS_OK;
	
	// get all properties
	XN_PROPERTY_SET_CREATE_ON_STACK(props);
	nRetVal = m_pSensor->GetAllProperties(&props, FALSE, GetModuleName());
	XN_IS_STATUS_OK(nRetVal);

	XnActualPropertiesHash* pPropsHash = props.pData->begin().Value();

	// filter properties (remove the ones already exposed as OpenNI interfaces)
	FilterProperties(pPropsHash);

	const XnChar* astrIntProps[200] = {0};
	const XnChar* astrRealProps[200] = {0};
	const XnChar* astrStringProps[200] = {0};
	const XnChar* astrGeneralProps[200] = {0};

	XnUInt32 nIntProps = 0;
	XnUInt32 nRealProps = 0;
	XnUInt32 nStringProps = 0;
	XnUInt32 nGeneralProps = 0;

	// enumerate over properties
	for (XnActualPropertiesHash::Iterator it = pPropsHash->begin(); it != pPropsHash->end(); ++it)
	{
		XnProperty* pProp = it.Value();

		switch (pProp->GetType())
		{
		case XN_PROPERTY_TYPE_INTEGER:
			{
				XnActualIntProperty* pIntProp = (XnActualIntProperty*)pProp;
				pNotifications->OnNodeIntPropChanged(pCookie, GetInstanceName(), pProp->GetName(), pIntProp->GetValue());
				astrIntProps[nIntProps++] = pProp->GetName();
			}
			break;
		case XN_PROPERTY_TYPE_REAL:
			{
				XnActualRealProperty* pRealProp = (XnActualRealProperty*)pProp;
				pNotifications->OnNodeRealPropChanged(pCookie, GetInstanceName(), pProp->GetName(), pRealProp->GetValue());
				astrRealProps[nRealProps++] = pProp->GetName();
			}
			break;
		case XN_PROPERTY_TYPE_STRING:
			{
				XnActualStringProperty* pStrProp = (XnActualStringProperty*)pProp;
				pNotifications->OnNodeStringPropChanged(pCookie, GetInstanceName(), pProp->GetName(), pStrProp->GetValue());
				astrStringProps[nStringProps++] = pProp->GetName();
			}
			break;
		case XN_PROPERTY_TYPE_GENERAL:
			{
				XnActualGeneralProperty* pGenProp = (XnActualGeneralProperty*)pProp;
				pNotifications->OnNodeGeneralPropChanged(pCookie, GetInstanceName(), pProp->GetName(), pGenProp->GetValue().nDataSize, pGenProp->GetValue().pData);
				astrGeneralProps[nGeneralProps++] = pProp->GetName();
			}
			break;
		default:
			XN_LOG_WARNING_RETURN(XN_STATUS_ERROR, XN_MASK_DEVICE_SENSOR, "Unknown property type: %d", pProp->GetType());
		}
	}

	// TODO: also register to these properties, and if changed, notify.

	// store notifications object
	m_pNotifications = pNotifications;
	m_pCookie = pCookie;

	return (XN_STATUS_OK);
}
开发者ID:AlpinistPanda，项目名称:SensorKinect，代码行数:72，代码来源:XnSensorProductionNode.cpp



注：本文中的XnProperty类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ XnSensorDepthStream类代码示例发布时间：2022-05-31
下一篇：
C++ XnDeviceStream类代码示例发布时间：2022-05-31
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap