• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ WDI_DS_ClientDataType类代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中WDI_DS_ClientDataType类的典型用法代码示例。如果您正苦于以下问题：C++ WDI_DS_ClientDataType类的具体用法？C++ WDI_DS_ClientDataType怎么用？C++ WDI_DS_ClientDataType使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。



在下文中一共展示了WDI_DS_ClientDataType类的5个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: WDTS_TxPacketComplete

/* DTS Tx packet complete function. 
 * This function should be invoked by the transport device to indicate 
 * transmit complete for a frame.
 * Parameters:
 * pContext:Cookie that should be passed back to the caller 
 * pFrame:Refernce to PAL frame.
 * Return Value: SUCCESS  Completed successfully.
 *     FAILURE_XXX  Request was rejected due XXX Reason.
 *
 */
wpt_status WDTS_TxPacketComplete(void *pContext, wpt_packet *pFrame, wpt_status status)
{
  WDI_DS_ClientDataType *pClientData = (WDI_DS_ClientDataType*)(pContext);
  WDI_DS_TxMetaInfoType     *pTxMetadata;
  void *pvBDHeader, *physBDHeader;
  wpt_uint8 staIndex;

  // Do Sanity checks
  if(NULL == pContext || NULL == pFrame){
    return eWLAN_PAL_STATUS_E_FAILURE;
  }


  // extract metadata from PAL packet
  pTxMetadata = WDI_DS_ExtractTxMetaData(pFrame);
  pTxMetadata->txCompleteStatus = status;

  // Free BD header from pool
  WDI_GetBDPointers(pFrame, &pvBDHeader,  &physBDHeader);
  switch(pTxMetadata->frmType) 
  {
    case WDI_MAC_DATA_FRAME:
    /* note that EAPOL frame hasn't incremented ReserveCount. see
       WDI_DS_TxPacket() in wlan_qct_wdi_ds.c
    */
#ifdef FEATURE_WLAN_TDLS
    /* I utilizes TDLS mgmt frame always sent at BD_RATE2. (See limProcessTdls.c)
       Assumption here is data frame sent by WDA_TxPacket() <- HalTxFrame/HalTxFrameWithComplete()
       should take managment path. As of today, only TDLS feature has special data frame
       which needs to be treated as mgmt.
    */
    if((!pTxMetadata->isEapol) &&
       ((pTxMetadata->txFlags & WDI_USE_BD_RATE2_FOR_MANAGEMENT_FRAME) != WDI_USE_BD_RATE2_FOR_MANAGEMENT_FRAME))
#else
    if(!pTxMetadata->isEapol)
#endif
    {
      /* SWAP BD header to get STA index for completed frame */
      WDI_SwapTxBd(pvBDHeader);
      staIndex = (wpt_uint8)WDI_TX_BD_GET_STA_ID(pvBDHeader);
      WDI_DS_MemPoolFree(&(pClientData->dataMemPool), pvBDHeader, physBDHeader);
      WDI_DS_MemPoolDecreaseReserveCount(&(pClientData->dataMemPool), staIndex);
      break;
    }
    // intentional fall-through to handle eapol packet as mgmt
    case WDI_MAC_MGMT_FRAME:
      WDI_DS_MemPoolFree(&(pClientData->mgmtMemPool), pvBDHeader, physBDHeader);
      break;
  }
  WDI_SetBDPointers(pFrame, 0, 0);

  // Invoke Tx complete callback
  pClientData->txCompleteCB(pClientData->pCallbackContext, pFrame);  
  return eWLAN_PAL_STATUS_SUCCESS;

}
开发者ID:NikitaProAndroid，项目名称:android_kernel_lge_l70pds，代码行数:66，代码来源:wlan_qct_wdi_dts.c


示例2: WDTS_TxPacketComplete

/* DTS Tx packet complete function. 
 * This function should be invoked by the transport device to indicate 
 * transmit complete for a frame.
 * Parameters:
 * pContext:Cookie that should be passed back to the caller 
 * pFrame:Refernce to PAL frame.
 * Return Value: SUCCESS  Completed successfully.
 *     FAILURE_XXX  Request was rejected due XXX Reason.
 *
 */
wpt_status WDTS_TxPacketComplete(void *pContext, wpt_packet *pFrame, wpt_status status)
{
  WDI_DS_ClientDataType *pClientData = (WDI_DS_ClientDataType*)(pContext);
  WDI_DS_TxMetaInfoType     *pTxMetadata;
  void *pvBDHeader, *physBDHeader;
  wpt_uint8 staIndex;

  // Do Sanity checks
  if(NULL == pContext || NULL == pFrame){
    return eWLAN_PAL_STATUS_E_FAILURE;
  }


  // extract metadata from PAL packet
  pTxMetadata = WDI_DS_ExtractTxMetaData(pFrame);
  pTxMetadata->txCompleteStatus = status;

  // Free BD header from pool
  WDI_GetBDPointers(pFrame, &pvBDHeader,  &physBDHeader);
  switch(pTxMetadata->frmType) 
  {
    case WDI_MAC_DATA_FRAME:
      /* SWAP BD header to get STA index for completed frame */
      WDI_SwapTxBd(pvBDHeader);
      staIndex = (wpt_uint8)WDI_TX_BD_GET_STA_ID(pvBDHeader);
      WDI_DS_MemPoolFree(&(pClientData->dataMemPool), pvBDHeader, physBDHeader);
      WDI_DS_MemPoolDecreaseReserveCount(&(pClientData->dataMemPool), staIndex);
      break;
    case WDI_MAC_MGMT_FRAME:
      WDI_DS_MemPoolFree(&(pClientData->mgmtMemPool), pvBDHeader, physBDHeader);
      break;
  }
  WDI_SetBDPointers(pFrame, 0, 0);

  // Invoke Tx complete callback
  pClientData->txCompleteCB(pClientData->pCallbackContext, pFrame);  
  return eWLAN_PAL_STATUS_SUCCESS;

}
开发者ID:JmzTaylor，项目名称:Evita-Jellybean，代码行数:49，代码来源:wlan_qct_wdi_dts.c


示例3: WDTS_OOResourceNotification

/* DTS Out of Resource packet function. 
 * This function should be invoked by the transport device to indicate 
 * the device is out of resources.
 * Parameters:
 * pContext:Cookie that should be passed back to the caller 
 * priority: indicates which channel is out of resource.
 * Return Value: SUCCESS  Completed successfully.
 *     FAILURE_XXX  Request was rejected due XXX Reason.
 */
wpt_status WDTS_OOResourceNotification(void *pContext, WDTS_ChannelType channel, wpt_boolean on)
{
  WDI_DS_ClientDataType *pClientData =
    (WDI_DS_ClientDataType *) pContext;
  static wpt_uint8 ac_mask = 0x1f;

  // Do Sanity checks
  if(NULL == pContext){
    return eWLAN_PAL_STATUS_E_FAILURE;
  }
  
  if(on){
    ac_mask |=  channel == WDTS_CHANNEL_TX_LOW_PRI?  0x0f : 0x10;
  } else {
    ac_mask &=  channel == WDTS_CHANNEL_TX_LOW_PRI?  0x10 : 0x0f;
  }


  // Invoke OOR callback
  pClientData->txResourceCB(pClientData->pCallbackContext, ac_mask); 
  return eWLAN_PAL_STATUS_SUCCESS;

}
开发者ID:NikitaProAndroid，项目名称:android_kernel_lge_l70pds，代码行数:32，代码来源:wlan_qct_wdi_dts.c


示例4: WDTS_RxPacket

/* DTS Rx packet function. 
 * This function should be invoked by the transport device to indicate 
 * reception of a frame.
 * Parameters:
 * pContext:Cookie that should be passed back to the caller 
 * pFrame:Refernce to PAL frame.
 * Return Value: SUCCESS  Completed successfully.
 *     FAILURE_XXX  Request was rejected due XXX Reason.
 *
 */
wpt_status WDTS_RxPacket (void *pContext, wpt_packet *pFrame, WDTS_ChannelType channel)
{
  WDI_DS_ClientDataType *pClientData = 
    (WDI_DS_ClientDataType*)(pContext);
  wpt_boolean       bASF, bFSF, bLSF, bAEF;
  wpt_uint8                   ucMPDUHOffset, ucMPDUHLen, ucTid;
  wpt_uint8                   *pBDHeader;
  wpt_uint16                  usMPDUDOffset, usMPDULen;
  WDI_DS_RxMetaInfoType     *pRxMetadata;
  wpt_uint8                  isFcBd = 0;

  tpSirMacFrameCtl  pMacFrameCtl;
  // Do Sanity checks
  if(NULL == pContext || NULL == pFrame){
    return eWLAN_PAL_STATUS_E_FAILURE;
  }

  /*------------------------------------------------------------------------
    Extract BD header and check if valid
    ------------------------------------------------------------------------*/
  pBDHeader = (wpt_uint8*)wpalPacketGetRawBuf(pFrame);
  if(NULL == pBDHeader)
  {
    DTI_TRACE( DTI_TRACE_LEVEL_ERROR,
       "WLAN TL:BD header received NULL - dropping packet");
    wpalPacketFree(pFrame);
    return eWLAN_PAL_STATUS_E_FAILURE;
  }
  WDI_SwapRxBd(pBDHeader);

  ucMPDUHOffset = (wpt_uint8)WDI_RX_BD_GET_MPDU_H_OFFSET(pBDHeader);
  usMPDUDOffset = (wpt_uint16)WDI_RX_BD_GET_MPDU_D_OFFSET(pBDHeader);
  usMPDULen     = (wpt_uint16)WDI_RX_BD_GET_MPDU_LEN(pBDHeader);
  ucMPDUHLen    = (wpt_uint8)WDI_RX_BD_GET_MPDU_H_LEN(pBDHeader);
  ucTid         = (wpt_uint8)WDI_RX_BD_GET_TID(pBDHeader);

  /* If RX thread drain small size of frame from HW too fast
   * Sometimes HW cannot handle interrupt fast enough
   * And system crash might happen
   * To avoid system crash, input 1usec delay each frame draining
   * within host side, if frame size is smaller that threshold.
   * This is SW work around, to fix HW problem
   * Throughput and SnS test done successfully */
  if (usMPDULen < DTS_RX_DELAY_FRAMESIZE_THRESHOLD)
  {
    wpalBusyWait(1);
  }

  /*------------------------------------------------------------------------
    Gather AMSDU information 
    ------------------------------------------------------------------------*/
  bASF = WDI_RX_BD_GET_ASF(pBDHeader);
  bAEF = WDI_RX_BD_GET_AEF(pBDHeader);
  bFSF = WDI_RX_BD_GET_ESF(pBDHeader);
  bLSF = WDI_RX_BD_GET_LSF(pBDHeader);
  isFcBd = WDI_RX_FC_BD_GET_FC(pBDHeader);

  DTI_TRACE( DTI_TRACE_LEVEL_INFO,
      "WLAN TL:BD header processing data: HO %d DO %d Len %d HLen %d"
      " Tid %d BD %d",
      ucMPDUHOffset, usMPDUDOffset, usMPDULen, ucMPDUHLen, ucTid,
      WDI_RX_BD_HEADER_SIZE);

  if(!isFcBd)
  {
      if(usMPDUDOffset <= ucMPDUHOffset || usMPDULen < ucMPDUHLen) {
        DTI_TRACE( DTI_TRACE_LEVEL_ERROR,
            "WLAN TL:BD header corrupted - dropping packet");
        /* Drop packet ???? */ 
        wpalPacketFree(pFrame);
        return eWLAN_PAL_STATUS_SUCCESS;
      }

      if((ucMPDUHOffset < WDI_RX_BD_HEADER_SIZE) &&  (!(bASF && !bFSF))){
        /* AMSDU case, ucMPDUHOffset = 0  it should be hancdled seperatly */
        /* Drop packet ???? */ 
        wpalPacketFree(pFrame);
        return eWLAN_PAL_STATUS_SUCCESS;
      }

      /* AMSDU frame, but not first sub-frame
       * No MPDU header, MPDU header offset is 0
       * Total frame size is actual frame size + MPDU data offset */
      if((ucMPDUHOffset < WDI_RX_BD_HEADER_SIZE) && (bASF && !bFSF)){
        ucMPDUHOffset = usMPDUDOffset;
      }

      if(VPKT_SIZE_BUFFER < (usMPDULen+ucMPDUHOffset)){
        DTI_TRACE( DTI_TRACE_LEVEL_FATAL,
                   "Invalid Frame size, might memory corrupted");
//.........这里部分代码省略.........
开发者ID:NikitaProAndroid，项目名称:android_kernel_lge_l70pds，代码行数:101，代码来源:wlan_qct_wdi_dts.c


示例5: WDTS_RxPacket

/* DTS Rx packet function. 
 * This function should be invoked by the transport device to indicate 
 * reception of a frame.
 * Parameters:
 * pContext:Cookie that should be passed back to the caller 
 * pFrame:Refernce to PAL frame.
 * Return Value: SUCCESS  Completed successfully.
 *     FAILURE_XXX  Request was rejected due XXX Reason.
 *
 */
wpt_status WDTS_RxPacket (void *pContext, wpt_packet *pFrame, WDTS_ChannelType channel)
{
  WDI_DS_ClientDataType *pClientData = 
    (WDI_DS_ClientDataType*)(pContext);
  wpt_boolean       bASF, bFSF, bLSF, bAEF;
  wpt_uint8                   ucMPDUHOffset, ucMPDUHLen, ucTid;
  wpt_uint8                   *pBDHeader;
  wpt_uint16                  usMPDUDOffset, usMPDULen;
  WDI_DS_RxMetaInfoType     *pRxMetadata;
  wpt_uint8                  isFcBd = 0;

  tpSirMacFrameCtl  pMacFrameCtl;
  // Do Sanity checks
  if(NULL == pContext || NULL == pFrame){
    return eWLAN_PAL_STATUS_E_FAILURE;
  }

  /*------------------------------------------------------------------------
    Extract BD header and check if valid
    ------------------------------------------------------------------------*/
  pBDHeader = (wpt_uint8*)wpalPacketGetRawBuf(pFrame);
  if(NULL == pBDHeader)
  {
    DTI_TRACE( DTI_TRACE_LEVEL_ERROR,
       "WLAN TL:BD header received NULL - dropping packet");
    wpalPacketFree(pFrame);
    return eWLAN_PAL_STATUS_E_FAILURE;
  }
  WDI_SwapRxBd(pBDHeader);

  ucMPDUHOffset = (wpt_uint8)WDI_RX_BD_GET_MPDU_H_OFFSET(pBDHeader);
  usMPDUDOffset = (wpt_uint16)WDI_RX_BD_GET_MPDU_D_OFFSET(pBDHeader);
  usMPDULen     = (wpt_uint16)WDI_RX_BD_GET_MPDU_LEN(pBDHeader);
  ucMPDUHLen    = (wpt_uint8)WDI_RX_BD_GET_MPDU_H_LEN(pBDHeader);
  ucTid         = (wpt_uint8)WDI_RX_BD_GET_TID(pBDHeader);

  /*------------------------------------------------------------------------
    Gather AMSDU information 
    ------------------------------------------------------------------------*/
  bASF = WDI_RX_BD_GET_ASF(pBDHeader);
  bAEF = WDI_RX_BD_GET_AEF(pBDHeader);
  bFSF = WDI_RX_BD_GET_ESF(pBDHeader);
  bLSF = WDI_RX_BD_GET_LSF(pBDHeader);
  isFcBd = WDI_RX_FC_BD_GET_FC(pBDHeader);

  DTI_TRACE( DTI_TRACE_LEVEL_INFO,
      "WLAN TL:BD header processing data: HO %d DO %d Len %d HLen %d"
      " Tid %d BD %d",
      ucMPDUHOffset, usMPDUDOffset, usMPDULen, ucMPDUHLen, ucTid,
      WDI_RX_BD_HEADER_SIZE);

  if(!isFcBd)
  {
      if(usMPDUDOffset <= ucMPDUHOffset || usMPDULen < ucMPDUHLen) {
        DTI_TRACE( DTI_TRACE_LEVEL_ERROR,
            "WLAN TL:BD header corrupted - dropping packet");
        /* Drop packet ???? */ 
        wpalPacketFree(pFrame);
        return eWLAN_PAL_STATUS_SUCCESS;
      }

      if((ucMPDUHOffset < WDI_RX_BD_HEADER_SIZE) &&  (!(bASF && !bFSF))){
        /* AMSDU case, ucMPDUHOffset = 0  it should be hancdled seperatly */
        /* Drop packet ???? */ 
        wpalPacketFree(pFrame);
        return eWLAN_PAL_STATUS_SUCCESS;
      }

      /* AMSDU frame, but not first sub-frame
       * No MPDU header, MPDU header offset is 0
       * Total frame size is actual frame size + MPDU data offset */
      if((ucMPDUHOffset < WDI_RX_BD_HEADER_SIZE) && (bASF && !bFSF)){
        ucMPDUHOffset = usMPDUDOffset;
      }

      if(VPKT_SIZE_BUFFER < (usMPDULen+ucMPDUHOffset)){
        DTI_TRACE( DTI_TRACE_LEVEL_FATAL,
                   "Invalid Frame size, might memory corrupted");
        wpalPacketFree(pFrame);
        return eWLAN_PAL_STATUS_SUCCESS;
      }
      wpalPacketSetRxLength(pFrame, usMPDULen+ucMPDUHOffset);
      wpalPacketRawTrimHead(pFrame, ucMPDUHOffset);

     

      pRxMetadata = WDI_DS_ExtractRxMetaData(pFrame);

      pRxMetadata->fc = isFcBd;
      pRxMetadata->staId = WDI_RX_BD_GET_STA_ID(pBDHeader);
//.........这里部分代码省略.........
开发者ID:JmzTaylor，项目名称:Evita-Jellybean，代码行数:101，代码来源:wlan_qct_wdi_dts.c



注：本文中的WDI_DS_ClientDataType类示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ WDL_FastString类代码示例发布时间：2022-05-31
下一篇：
C++ WContainerWidget类代码示例发布时间：2022-05-31
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap