|
unicode 版本 delphi (如XE2)下的 base64,des,md5 算法
md5 的比较好改, des 和 base64 的比较麻烦.
md5.pas
// tabs = 2
// -----------------------------------------------------------------------------------------------
//
// MD5 Message-Digest for Delphi 4
//
// Delphi 4 Unit implementing the
// RSA Data Security, Inc. MD5 Message-Digest Algorithm
//
// Implementation of Ronald L. Rivest's RFC 1321
//
// Copyright ?1997-1999 Medienagentur Fichtner & Meyer
// Written by Matthias Fichtner
//
// -----------------------------------------------------------------------------------------------
// See RFC 1321 for RSA Data Security's copyright and license notice!
// -----------------------------------------------------------------------------------------------
//
// 14-Jun-97 mf Implemented MD5 according to RFC 1321 RFC 1321
// 16-Jun-97 mf Initial release of the compiled unit (no source code) RFC 1321
// 28-Feb-99 mf Added MD5Match function for comparing two digests RFC 1321
// 13-Sep-99 mf Reworked the entire unit RFC 1321
// 17-Sep-99 mf Reworked the "Test Driver" project RFC 1321
// 19-Sep-99 mf Release of sources for MD5 unit and "Test Driver" project RFC 1321
//
// -----------------------------------------------------------------------------------------------
// The latest release of md5.pas will always be available from
// the distribution site at: http://www.fichtner.net/delphi/md5/
// -----------------------------------------------------------------------------------------------
// Please send questions, bug reports and suggestions
// regarding this code to: [email protected]
// -----------------------------------------------------------------------------------------------
// This code is provided "as is" without express or
// implied warranty of any kind. Use it at your own risk.
// -----------------------------------------------------------------------------------------------
unit md5;
{$WARNINGS OFF}
// -----------------------------------------------------------------------------------------------
INTERFACE
// -----------------------------------------------------------------------------------------------
uses
Windows,Dialogs;
type
MD5Count = array[0..1] of DWORD;
MD5State = array[0..3] of DWORD;
MD5Block = array[0..15] of DWORD;
MD5CBits = array[0..7] of byte;
MD5Digest = array[0..15] of byte;
MD5Buffer = array[0..63] of byte;
MD5Context = record
State: MD5State;
Count: MD5Count;
Buffer: MD5Buffer;
end;
Char = AnsiChar;//clq
procedure MD5Init(var Context: MD5Context);
procedure MD5Update(var Context: MD5Context; Input: pChar; Length: longword);
procedure MD5Final(var Context: MD5Context; var Digest: MD5Digest);
//function MD5String(M: string): MD5Digest;
function MD5String(M: AnsiString): MD5Digest;
function MD5File(N: string): MD5Digest;
function MD5Print(D: MD5Digest): string;
function MD5Match(D1, D2: MD5Digest): boolean;
//added by Crazy Worm 2005.6.7
function MD5DigestToString(D:MD5Digest):string;
function MD5StringToDigest(M:string):MD5Digest;
//function StringToMD5String(M:string):string;
function StringToMD5String(M:AnsiString):string;
// -----------------------------------------------------------------------------------------------
IMPLEMENTATION
// -----------------------------------------------------------------------------------------------
var
PADDING: MD5Buffer = (
$80, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00,
$00, $00, $00, $00, $00, $00, $00, $00
);
function F(x, y, z: DWORD): DWORD;
begin
Result := (x and y) or ((not x) and z);
end;
function G(x, y, z: DWORD): DWORD;
begin
Result := (x and z) or (y and (not z));
end;
function H(x, y, z: DWORD): DWORD;
begin
Result := x xor y xor z;
end;
function I(x, y, z: DWORD): DWORD;
begin
Result := y xor (x or (not z));
end;
procedure rot(var x: DWORD; n: BYTE);
begin
x := (x shl n) or (x shr (32 - n));
end;
procedure FF(var a: DWORD; b, c, d, x: DWORD; s: BYTE; ac: DWORD);
begin
inc(a, F(b, c, d) + x + ac);
rot(a, s);
inc(a, b);
end;
procedure GG(var a: DWORD; b, c, d, x: DWORD; s: BYTE; ac: DWORD);
begin
inc(a, G(b, c, d) + x + ac);
rot(a, s);
inc(a, b);
end;
procedure HH(var a: DWORD; b, c, d, x: DWORD; s: BYTE; ac: DWORD);
begin
inc(a, H(b, c, d) + x + ac);
rot(a, s);
inc(a, b);
end;
procedure II(var a: DWORD; b, c, d, x: DWORD; s: BYTE; ac: DWORD);
begin
inc(a, I(b, c, d) + x + ac);
rot(a, s);
inc(a, b);
end;
// -----------------------------------------------------------------------------------------------
// Encode Count bytes at Source into (Count / 4) DWORDs at Target
procedure Encode(Source, Target: pointer; Count: longword);
var
S: PByte;
T: PDWORD;
I: longword;
begin
S := Source;
T := Target;
for I := 1 to Count div 4 do begin
T^ := S^;
inc(S);
T^ := T^ or (S^ shl 8);
inc(S);
T^ := T^ or (S^ shl 16);
inc(S);
T^ := T^ or (S^ shl 24);
inc(S);
inc(T);
end;
end;
// Decode Count DWORDs at Source into (Count * 4) Bytes at Target
procedure Decode(Source, Target: pointer; Count: longword);
var
S: PDWORD;
T: PByte;
I: longword;
begin
S := Source;
T := Target;
for I := 1 to Count do begin
T^ := S^ and $ff;
inc(T);
T^ := (S^ shr 8) and $ff;
inc(T);
T^ := (S^ shr 16) and $ff;
inc(T);
T^ := (S^ shr 24) and $ff;
inc(T);
inc(S);
end;
end;
// Transform State according to first 64 bytes at Buffer
procedure Transform(Buffer: pointer; var State: MD5State);
var
a, b, c, d: DWORD;
Block: MD5Block;
begin
Encode(Buffer, @Block, 64);
a := State[0];
b := State[1];
c := State[2];
d := State[3];
FF (a, b, c, d, Block[ 0], 7, $d76aa478);
FF (d, a, b, c, Block[ 1], 12, $e8c7b756);
FF (c, d, a, b, Block[ 2], 17, $242070db);
FF (b, c, d, a, Block[ 3], 22, $c1bdceee);
FF (a, b, c, d, Block[ 4], 7, $f57c0faf);
FF (d, a, b, c, Block[ 5], 12, $4787c62a);
FF (c, d, a, b, Block[ 6], 17, $a8304613);
FF (b, c, d, a, Block[ 7], 22, $fd469501);
FF (a, b, c, d, Block[ 8], 7, $698098d8);
FF (d, a, b, c, Block[ 9], 12, $8b44f7af);
FF (c, d, a, b, Block[10], 17, $ffff5bb1);
FF (b, c, d, a, Block[11], 22, $895cd7be);
FF (a, b, c, d, Block[12], 7, $6b901122);
FF (d, a, b, c, Block[13], 12, $fd987193);
FF (c, d, a, b, Block[14], 17, $a679438e);
FF (b, c, d, a, Block[15], 22, $49b40821);
GG (a, b, c, d, Block[ 1], 5, $f61e2562);
GG (d, a, b, c, Block[ 6], 9, $c040b340);
GG (c, d, a, b, Block[11], 14, $265e5a51);
GG (b, c, d, a, Block[ 0], 20, $e9b6c7aa);
GG (a, b, c, d, Block[ 5], 5, $d62f105d);
GG (d, a, b, c, Block[10], 9, $2441453);
GG (c, d, a, b, Block[15], 14, $d8a1e681);
GG (b, c, d, a, Block[ 4], 20, $e7d3fbc8);
GG (a, b, c, d, Block[ 9], 5, $21e1cde6);
GG (d, a, b, c, Block[14], 9, $c33707d6);
GG (c, d, a, b, Block[ 3], 14, $f4d50d87);
GG (b, c, d, a, Block[ 8], 20, $455a14ed);
GG (a, b, c, d, Block[13], 5, $a9e3e905);
GG (d, a, b, c, Block[ 2], 9, $fcefa3f8);
GG (c, d, a, b, Block[ 7], 14, $676f02d9);
GG (b, c, d, a, Block[12], 20, $8d2a4c8a);
HH (a, b, c, d, Block[ 5], 4, $fffa3942);
HH (d, a, b, c, Block[ 8], 11, $8771f681);
HH (c, d, a, b, Block[11], 16, $6d9d6122);
HH (b, c, d, a, Block[14], 23, $fde5380c);
HH (a, b, c, d, Block[ 1], 4, $a4beea44);
HH (d, a, b, c, Block[ 4], 11, $4bdecfa9);
HH (c, d, a, b, Block[ 7], 16, $f6bb4b60);
HH (b, c, d, a, Block[10], 23, $bebfbc70);
HH (a, b, c, d, Block[13], 4, $289b7ec6);
HH (d, a, b, c, Block[ 0], 11, $eaa127fa);
HH (c, d, a, b, Block[ 3], 16, $d4ef3085);
HH (b, c, d, a, Block[ 6], 23, $4881d05);
HH (a, b, c, d, Block[ 9], 4, $d9d4d039);
HH (d, a, b, c, Block[12], 11, $e6db99e5);
HH (c, d, a, b, Block[15], 16, $1fa27cf8);
HH (b, c, d, a, Block[ 2], 23, $c4ac5665);
II (a, b, c, d, Block[ 0], 6, $f4292244);
II (d, a, b, c, Block[ 7], 10, $432aff97);
II (c, d, a, b, Block[14], 15, $ab9423a7);
II (b, c, d, a, Block[ 5], 21, $fc93a039);
II (a, b, c, d, Block[12], 6, $655b59c3);
II (d, a, b, c, Block[ 3], 10, $8f0ccc92);
II (c, d, a, b, Block[10], 15, $ffeff47d);
II (b, c, d, a, Block[ 1], 21, $85845dd1);
II (a, b, c, d, Block[ 8], 6, $6fa87e4f);
II (d, a, b, c, Block[15], 10, $fe2ce6e0);
II (c, d, a, b, Block[ 6], 15, $a3014314);
II (b, c, d, a, Block[13], 21, $4e0811a1);
II (a, b, c, d, Block[ 4], 6, $f7537e82);
II (d, a, b, c, Block[11], 10, $bd3af235);
II (c, d, a, b, Block[ 2], 15, $2ad7d2bb);
II (b, c, d, a, Block[ 9], 21, $eb86d391);
inc(State[0], a);
inc(State[1], b);
inc(State[2], c);
inc(State[3], d);
end;
// -----------------------------------------------------------------------------------------------
// Initialize given Context
procedure MD5Init(var Context: MD5Context);
begin
with Context do begin
State[0] := $67452301;
State[1] := $efcdab89;
State[2] := $98badcfe;
State[3] := $10325476;
Count[0] := 0;
Count[1] := 0;
ZeroMemory(@Buffer, SizeOf(MD5Buffer));
end;
end;
// Update given Context to include Length bytes of Input
procedure MD5Update(var Context: MD5Context; Input: pChar; Length: longword);
var
Index: longword;
PartLen: longword;
I: longword;
begin
with Context do begin
Index := (Count[0] shr 3) and $3f;
inc(Count[0], Length shl 3);
if Count[0] < (Length shl 3) then inc(Count[1]);
inc(Count[1], Length shr 29);
end;
PartLen := 64 - Index;
if Length >= PartLen then begin
CopyMemory(@Context.Buffer[Index], Input, PartLen);
Transform(@Context.Buffer, Context.State);
I := PartLen;
while I + 63 < Length do begin
Transform(@Input[I], Context.State);
inc(I, 64);
end;
Index := 0;
end else I := 0;
CopyMemory(@Context.Buffer[Index], @Input[I], Length - I);
end;
// Finalize given Context, create Digest and zeroize Context
procedure MD5Final(var Context: MD5Context; var Digest: MD5Digest);
var
Bits: MD5CBits;
Index: longword;
PadLen: longword;
begin
Decode(@Context.Count, @Bits, 2);
Index := (Context.Count[0] shr 3) and $3f;
if Index < 56 then PadLen := 56 - Index else PadLen := 120 - Index;
MD5Update(Context, @PADDING, PadLen);
MD5Update(Context, @Bits, 8);
Decode(@Context.State, @Digest, 4);
ZeroMemory(@Context, SizeOf(MD5Context));
end;
// -----------------------------------------------------------------------------------------------
// Create digest of given Message
//function MD5String(M: string): MD5Digest;
function MD5String(M: AnsiString): MD5Digest;
var
Context: MD5Context;
begin
MD5Init(Context);
MD5Update(Context, pChar(M), length(M));
MD5Final(Context, Result);
end;
// Create digest of file with given Name
function MD5File(N: string): MD5Digest;
var
FileHandle: THandle;
MapHandle: THandle;
ViewPointer: pointer;
Context: MD5Context;
begin
MD5Init(Context);
FileHandle := CreateFile(pChar(N), GENERIC_READ, FILE_SHARE_READ or FILE_SHARE_WRITE,
nil, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL or FILE_FLAG_SEQUENTIAL_SCAN, 0);
if FileHandle <> INVALID_HANDLE_VALUE then try
MapHandle := CreateFileMapping(FileHandle, nil, PAGE_READONLY, 0, 0, nil);
if MapHandle <> 0 then try
ViewPointer := MapViewOfFile(MapHandle, FILE_MAP_READ, 0, 0, 0);
if ViewPointer <> nil then try
MD5Update(Context, ViewPointer, GetFileSize(FileHandle, nil));
finally
UnmapViewOfFile(ViewPointer);
end;
finally
CloseHandle(MapHandle);
end;
finally
CloseHandle(FileHandle);
end;
MD5Final(Context, Result);
end;
// Create hex representation of given Digest
function MD5Print(D: MD5Digest): string;
var
I: byte;
const
Digits: array[0..15] of char =
('0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f');
begin
Result := '';
for I := 0 to 15 do Result := Result + Digits[(D[I] shr 4) and $0f] + Digits[D[I] and $0f];
end;
// -----------------------------------------------------------------------------------------------
// Compare two Digests
function MD5Match(D1, D2: MD5Digest): boolean;
var
I: byte;
begin
I := 0;
Result := TRUE;
while Result and (I < 16) do begin
Result := D1[I] = D2[I];
inc(I);
end;
end;
function MD5DigestToString(D:MD5Digest):string;
var
I: byte;
const
Digits: array[0..15] of char =
('0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'a', 'b', 'c', 'd', 'e', 'f');
begin
Result := '';
for I := 0 to 15 do Result := Result + Digits[(D[I] shr 4) and $0f] + Digits[D[I] and $0f];
end;
function MD5StringToDigest(M:string):MD5Digest;
var
I,J,H1,H2:byte;
MD5:MD5Digest;
begin
if Length(M)<16 then
begin
Result:=MD5;
Exit;
end;
for I:=0 to 15 do
begin
J:=(I shl 1)+1;
H1:=Byte(M[J]);
if H1>$60 then H1:=H1-$61+$A
else H1:=H1-$30;
H2:=Byte(M[J+1]);
if H2>$60 then H2:=H2-$61+$A
else H2:=H2-$30;
MD5[I]:=(H1 shl 4)+H2;
end;
Result:=MD5;
end;
//function StringToMD5String(M:string):string;
function StringToMD5String(M:AnsiString):string;
var
D:MD5Digest;
begin
D:=MD5String(M);
Result:=MD5DigestToString(D);
//ShowMessage(Result);//这个是小写的,很多系统是用大写的
end;
end.
des.pas
unit Des;
interface
uses SysUtils;
type
TKeyByte = array[0..5] of Byte;
TDesMode = (dmEncry, dmDecry);
Char = AnsiChar;//clq
//function EncryStr(Str, Key: String): String;
function EncryStr(Str, Key: AnsiString): AnsiString;
function DecryStr(Str2, Key: AnsiString): AnsiString;
function EncryStrHex(Str, Key: AnsiString): AnsiString;
function DecryStrHex(StrHex, Key: AnsiString): AnsiString;
const
BitIP: array[0..63] of Byte =
(57, 49, 41, 33, 25, 17, 9, 1,
59, 51, 43, 35, 27, 19, 11, 3,
61, 53, 45, 37, 29, 21, 13, 5,
63, 55, 47, 39, 31, 23, 15, 7,
56, 48, 40, 32, 24, 16, 8, 0,
58, 50, 42, 34, 26, 18, 10, 2,
60, 52, 44, 36, 28, 20, 12, 4,
62, 54, 46, 38, 30, 22, 14, 6 );
BitCP: array[0..63] of Byte =
( 39, 7, 47, 15, 55, 23, 63, 31,
38, 6, 46, 14, 54, 22, 62, 30,
37, 5, 45, 13, 53, 21, 61, 29,
36, 4, 44, 12, 52, 20, 60, 28,
35, 3, 43, 11, 51, 19, 59, 27,
34, 2, 42, 10, 50, 18, 58, 26,
33, 1, 41, 9, 49, 17, 57, 25,
32, 0, 40, 8, 48, 16, 56, 24 );
BitExp: array[0..47] of Integer =
( 31, 0, 1, 2, 3, 4, 3, 4, 5, 6, 7, 8, 7, 8, 9,10,
11,12,11,12,13,14,15,16,15,16,17,18,19,20,19,20,
21,22,23,24,23,24,25,26,27,28,27,28,29,30,31,0 );
BitPM: array[0..31] of Byte =
( 15, 6,19,20,28,11,27,16, 0,14,22,25, 4,17,30, 9,
1, 7,23,13,31,26, 2, 8,18,12,29, 5,21,10, 3,24 );
sBox: array[0..7] of array[0..63] of Byte =
( ( 14, 4, 13, 1, 2, 15, 11, 8, 3, 10, 6, 12, 5, 9, 0, 7,
0, 15, 7, 4, 14, 2, 13, 1, 10, 6, 12, 11, 9, 5, 3, 8,
4, 1, 14, 8, 13, 6, 2, 11, 15, 12, 9, 7, 3, 10, 5, 0,
15, 12, 8, 2, 4, 9, 1, 7, 5, 11, 3, 14, 10, 0, 6, 13 ),
( 15, 1, 8, 14, 6, 11, 3, 4, 9, 7, 2, 13, 12, 0, 5, 10,
3, 13, 4, 7, 15, 2, 8, 14, 12, 0, 1, 10, 6, 9, 11, 5,
0, 14, 7, 11, 10, 4, 13, 1, 5, 8, 12, 6, 9, 3, 2, 15,
13, 8, 10, 1, 3, 15, 4, 2, 11, 6, 7, 12, 0, 5, 14, 9 ),
( 10, 0, 9, 14, 6, 3, 15, 5, 1, 13, 12, 7, 11, 4, 2, 8,
13, 7, 0, 9, 3, 4, 6, 10, 2, 8, 5, 14, 12, 11, 15, 1,
13, 6, 4, 9, 8, 15, 3, 0, 11, 1, 2, 12, 5, 10, 14, 7,
1, 10, 13, 0, 6, 9, 8, 7, 4, 15, 14, 3, 11, 5, 2, 12 ),
( 7, 13, 14, 3, 0, 6, 9, 10, 1, 2, 8, 5, 11, 12, 4, 15,
13, 8, 11, 5, 6, 15, 0, 3, 4, 7, 2, 12, 1, 10, 14, 9,
10, 6, 9, 0, 12, 11, 7, 13, 15, 1, 3, 14, 5, 2, 8, 4,
3, 15, 0, 6, 10, 1, 13, 8, 9, 4, 5, 11, 12, 7, 2, 14 ),
( 2, 12, 4, 1, 7, 10, 11, 6, 8, 5, 3, 15, 13, 0, 14, 9,
14, 11, 2, 12, 4, 7, 13, 1, 5, 0, 15, 10, 3, 9, 8, 6,
4, 2, 1, 11, 10, 13, 7, 8, 15, 9, 12, 5, 6, 3, 0, 14,
11, 8, 12, 7, 1, 14, 2, 13, 6, 15, 0, 9, 10, 4, 5, 3 ),
( 12, 1, 10, 15, 9, 2, 6, 8, 0, 13, 3, 4, 14, 7, 5, 11,
10, 15, 4, 2, 7, 12, 9, 5, 6, 1, 13, 14, 0, 11, 3, 8,
9, 14, 15, 5, 2, 8, 12, 3, 7, 0, 4, 10, 1, 13, 11, 6,
4, 3, 2, 12, 9, 5, 15, 10, 11, 14, 1, 7, 6, 0, 8, 13 ),
( 4, 11, 2, 14, 15, 0, 8, 13, 3, 12, 9, 7, 5, 10, 6, 1,
13, 0, 11, 7, 4, 9, 1, 10, 14, 3, 5, 12, 2, 15, 8, 6,
1, 4, 11, 13, 12, 3, 7, 14, 10, 15, 6, 8, 0, 5, 9, 2,
6, 11, 13, 8, 1, 4, 10, 7, 9, 5, 0, 15, 14, 2, 3, 12 ),
( 13, 2, 8, 4, 6, 15, 11, 1, 10, 9, 3, 14, 5, 0, 12, 7,
1, 15, 13, 8, 10, 3, 7, 4, 12, 5, 6, 11, 0, 14, 9, 2,
7, 11, 4, 1, 9, 12, 14, 2, 0, 6, 10, 13, 15, 3, 5, 8,
2, 1, 14, 7, 4, 10, 8, 13, 15, 12, 9, 0, 3, 5, 6, 11 ) );
BitPMC1: array[0..55] of Byte =
( 56, 48, 40, 32, 24, 16, 8,
0, 57, 49, 41, 33, 25, 17,
9, 1, 58, 50, 42, 34, 26,
18, 10, 2, 59, 51, 43, 35,
62, 54, 46, 38, 30, 22, 14,
6, 61, 53, 45, 37, 29, 21,
13, 5, 60, 52, 44, 36, 28,
20, 12, 4, 27, 19, 11, 3 );
BitPMC2: array[0..47] of Byte =
( 13, 16, 10, 23, 0, 4,
2, 27, 14, 5, 20, 9,
22, 18, 11, 3, 25, 7,
15, 6, 26, 19, 12, 1,
40, 51, 30, 36, 46, 54,
29, 39, 50, 44, 32, 47,
43, 48, 38, 55, 33, 52,
45, 41, 49, 35, 28, 31 );
var
subKey: array[0..15] of TKeyByte;
implementation
//--------------------------------------------------
//clq
function Chr(X: Byte): AnsiChar;
var
c:AnsiChar;
begin
Result := AnsiChar(X);
end;
function Ord(c:AnsiChar): Byte;
begin
Result := Byte(c);
end;
//--------------------------------------------------
procedure initPermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);
for i := 0 to 63 do
if (inData[BitIP[i] shr 3] and (1 shl (7- (BitIP[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData[i] := newData[i];
end;
procedure conversePermutation(var inData: array of Byte);
var
newData: array[0..7] of Byte;
i: Integer;
begin
FillChar(newData, 8, 0);
for i := 0 to 63 do
if (inData[BitCP[i] shr 3] and (1 shl (7-(BitCP[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 7 do inData[i] := newData[i];
end;
procedure expand(inData: array of Byte; var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitExp[i] shr 3] and (1 shl (7-(BitExp[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure permutation(var inData: array of Byte);
var
newData: array[0..3] of Byte;
i: Integer;
begin
FillChar(newData, 4, 0);
for i := 0 to 31 do
if (inData[BitPM[i] shr 3] and (1 shl (7-(BitPM[i] and $07)))) <> 0 then
newData[i shr 3] := newData[i shr 3] or (1 shl (7-(i and $07)));
for i := 0 to 3 do inData[i] := newData[i];
end;
function si(s,inByte: Byte): Byte;
var
c: Byte;
begin
c := (inByte and $20) or ((inByte and $1e) shr 1) or
((inByte and $01) shl 4);
Result := (sBox[s][c] and $0f);
end;
procedure permutationChoose1(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 7, 0);
for i := 0 to 55 do
if (inData[BitPMC1[i] shr 3] and (1 shl (7-(BitPMC1[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure permutationChoose2(inData: array of Byte;
var outData: array of Byte);
var
i: Integer;
begin
FillChar(outData, 6, 0);
for i := 0 to 47 do
if (inData[BitPMC2[i] shr 3] and (1 shl (7-(BitPMC2[i] and $07)))) <> 0 then
outData[i shr 3] := outData[i shr 3] or (1 shl (7-(i and $07)));
end;
procedure cycleMove(var inData: array of Byte; bitMove: Byte);
var
i: Integer;
begin
for i := 0 to bitMove - 1 do
begin
inData[0] := (inData[0] shl 1) or (inData[1] shr 7);
inData[1] := (inData[1] shl 1) or (inData[2] shr 7);
inData[2] := (inData[2] shl 1) or (inData[3] shr 7);
inData[3] := (inData[3] shl 1) or ((inData[0] and $10) shr 4);
inData[0] := (inData[0] and $0f);
end;
end;
procedure makeKey(inKey: array of Byte; var outKey: array of TKeyByte);
const
bitDisplace: array[0..15] of Byte =
( 1,1,2,2, 2,2,2,2, 1,2,2,2, 2,2,2,1 );
var
outData56: array[0..6] of Byte;
key28l: array[0..3] of Byte;
key28r: array[0..3] of Byte;
key56o: array[0..6] of Byte;
i: Integer;
begin
permutationChoose1(inKey, outData56);
key28l[0] := outData56[0] shr 4;
key28l[1] := (outData56[0] shl 4) or (outData56[1] shr 4);
key28l[2] := (outData56[1] shl 4) or (outData56[2] shr 4);
key28l[3] := (outData56[2] shl 4) or (outData56[3] shr 4);
key28r[0] := outData56[3] and $0f;
key28r[1] := outData56[4];
key28r[2] := outData56[5];
key28r[3] := outData56[6];
for i := 0 to 15 do
begin
cycleMove(key28l, bitDisplace[i]);
cycleMove(key28r, bitDisplace[i]);
key56o[0] := (key28l[0] shl 4) or (key28l[1] shr 4);
key56o[1] := (key28l[1] shl 4) or (key28l[2] shr 4);
key56o[2] := (key28l[2] shl 4) or (key28l[3] shr 4);
key56o[3] := (key28l[3] shl 4) or (key28r[0]);
key56o[4] := key28r[1];
key56o[5] := key28r[2];
key56o[6] := key28r[3];
permutationChoose2(key56o, outKey[i]);
end;
end;
procedure encry(inData, subKey: array of Byte;
var outData: array of Byte);
var
outBuf: array[0..5] of Byte;
buf: array[0..7] of Byte;
i: Integer;
begin
expand(inData, outBuf);
for i := 0 to 5 do outBuf[i] := outBuf[i] xor subKey[i];
// outBuf xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
buf[0] := outBuf[0] shr 2; //xxxxxx -> 2
buf[1] := ((outBuf[0] and $03) shl 4) or (outBuf[1] shr 4); // 4 <- xx xxxx -> 4
buf[2] := ((outBuf[1] and $0f) shl 2) or (outBuf[2] shr 6); // 2 <- xxxx xx -> 6
buf[3] := outBuf[2] and $3f; // xxxxxx
buf[4] := outBuf[3] shr 2; // xxxxxx
buf[5] := ((outBuf[3] and $03) shl 4) or (outBuf[4] shr 4); // xx xxxx
buf[6] := ((outBuf[4] and $0f) shl 2) or (outBuf[5] shr 6); // xxxx xx
buf[7] := outBuf[5] and $3f; // xxxxxx
for i := 0 to 7 do buf[i] := si(i, buf[i]);
for i := 0 to 3 do outBuf[i] := (buf[i*2] shl 4) or buf[i*2+1];
permutation(outBuf);
for i := 0 to 3 do outData[i] := outBuf[i];
end;
procedure desData(desMode: TDesMode;
inData: array of Byte; var outData: array of Byte);
// inData, outData 都为8Bytes，否则出错
var
i, j: Integer;
temp, buf: array[0..3] of Byte;
begin
for i := 0 to 7 do outData[i] := inData[i];
initPermutation(outData);
if desMode = dmEncry then
begin
for i := 0 to 15 do
begin
for j := 0 to 3 do temp[j] := outData[j]; //temp = Ln
for j := 0 to 3 do outData[j] := outData[j + 4]; //Ln+1 = Rn
encry(outData, subKey[i], buf); //Rn ==Kn==> buf
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j]; //Rn+1 = Ln^buf
end;
for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end
else if desMode = dmDecry then
begin
for i := 15 downto 0 do
begin
for j := 0 to 3 do temp[j] := outData[j];
for j := 0 to 3 do outData[j] := outData[j + 4];
encry(outData, subKey[i], buf);
for j := 0 to 3 do outData[j + 4] := temp[j] xor buf[j];
end;
for j := 0 to 3 do temp[j] := outData[j + 4];
for j := 0 to 3 do outData[j + 4] := outData[j];
for j := 0 to 3 do outData[j] := temp[j];
end;
conversePermutation(outData);
end;
//////////////////////////////////////////////////////////////
//function EncryStr(Str, Key: String): String;
function EncryStr(Str, Key: AnsiString): AnsiString;
var
StrByte, OutByte, KeyByte: array[0..7] of Byte;
//StrResult: String;
StrResult: AnsiString;
I, J: Integer;
begin
if (Length(Str) > 0) and (Ord(Str[Length(Str)]) = 0) then
raise Exception.Create('Error: the last char is NULL char.');
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);
while Length(Str) mod 8 <> 0 do Str := Str + Chr(0);
for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
makeKey(keyByte, subKey);
StrResult := '';
for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do
StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmEncry, StrByte, OutByte);
for J := 0 to 7 do
StrResult := StrResult + Chr(OutByte[J]);
end;
Result := StrResult;
end;
function DecryStr(Str2, Key: AnsiString): AnsiString;
var
StrByte, OutByte, KeyByte: array[0..7] of Byte;
StrResult: AnsiString;
I, J: Integer;
str:AnsiString;
begin
str := Str2;
if Length(Key) < 8 then
while Length(Key) < 8 do Key := Key + Chr(0);
for J := 0 to 7 do KeyByte[J] := Ord(Key[J + 1]);
makeKey(keyByte, subKey);
StrResult := '';
for I := 0 to Length(Str) div 8 - 1 do
begin
for J := 0 to 7 do StrByte[J] := Ord(Str[I * 8 + J + 1]);
desData(dmDecry, StrByte, OutByte);
for J := 0 to 7 do
StrResult := StrResult + Chr(OutByte[J]);
end;
while (Length(StrResult) > 0) and
(Ord(StrResult[Length(StrResult)]) = 0) do
Delete(StrResult, Length(StrResult), 1);
Result := StrResult;
end;
///////////////////////////////////////////////////////////
function EncryStrHex(Str, Key: AnsiString): AnsiString;
var
StrResult, TempResult, Temp: AnsiString;
I: Integer;
begin
TempResult := EncryStr(Str, Key);
StrResult := '';
for I := 0 to Length(TempResult) - 1 do
begin
Temp := Format('%x', [Ord(TempResult[I + 1])]);
if Length(Temp) = 1 then Temp := '0' + Temp;
StrResult := StrResult + Temp;
end;
Result := StrResult;
end;
function DecryStrHex(StrHex, Key: AnsiString): AnsiString;
function HexToInt(Hex: AnsiString): Integer;
var
I, Res: Integer;
ch: AnsiChar;
begin
Res := 0;
for I := 0 to Length(Hex) - 1 do
begin
ch := Hex[I + 1];
if (ch >= '0') and (ch <= '9') then
Res := Res * 16 + Ord(ch) - Ord('0')
else if (ch >= 'A') and (ch <= 'F') then
Res := Res * 16 + Ord(ch) - Ord('A') + 10
else if (ch >= 'a') and (ch <= 'f') then
Res := Res * 16 + Ord(ch) - Ord('a') + 10
else raise Exception.Create('Error: not a Hex String');
end;
Result := Res;
end;
var
Str, Temp: AnsiString;
I: Integer;
begin
Str := '';
for I := 0 to Length(StrHex) div 2 - 1 do
begin
Temp := Copy(StrHex, I * 2 + 1, 2);
Str := Str + Chr(HexToInt(Temp));
end;
Result := DecryStr(Str, Key);
end;
end.
base64.pas
unit base64;
//delphi7中EncdDecd单元EncodeString函数好像也是base64编码函数
interface
uses
Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
EncdDecd,
IdGlobal,
Dialogs, StdCtrls;
function StrToBase64(const str: string): string;
//function Base64ToStr(const Base64: string): string;
function Base64ToStr(const Base64: AnsiString): AnsiString;
implementation
function StrToBase64(const str: string): string;
var
s:AnsiString;
begin
//Result := EncdDecd.EncodeString(str);exit;
//Result := EncdDecd.EncodeBase64(str);
s := str;
Result := EncdDecd.EncodeBase64(PAnsiChar(s), Length(s));
Result := StringReplace(Result, #13#10, '', [rfReplaceAll]);//去掉回车换行,因为有些系统不支持
end;
function Base64ToStr(const Base64: AnsiString): AnsiString;
var
buf:TBytes;
begin
//Result := EncdDecd.DecodeString(Base64);Exit;//
buf := EncdDecd.DecodeBase64(Base64);
//ShowMessage(PAnsiChar(@buf[0]));
//BytesToRaw(buf, head, SizeOf(TProtoHead));
//Result := BytesToString(buf, TIdTextEncoding.ASCII);Exit;//不对,即使是用了 ASCII 仍然进行了转码,没法得到原始数据
//Result := BytesToString(buf, TIdTextEncoding.UTF8);
//Result := (PAnsiChar(@buf[0]));
SetLength(Result, Length(buf));
//SetAnsiString(@Result, @buf[0], Length(buf));
//StrLCopy(PAnsiChar(result), @buf[0], Length(buf));//不行会在 #0 时出错
CopyMemory(PAnsiChar(result), @buf[0], Length(buf));
end;
end.
2017. 更新,最新版本可在 http://softhub.newbt.net/160/%7BDBA604F7-34F9-8A74-AD29-6FA36EB3327B%7D-0.html 下载到.
|
客服电话
APP下载
官方微信
请发表评论