开源软件名称（OpenSource Name）：

开源软件地址(OpenSource Url)：

开源编程语言(OpenSource Language)：

开源软件介绍(OpenSource Introduction)：

lua-resty-healthcheck

A health check library for OpenResty.

Synopsis

http {
    lua_shared_dict test_shm 8m;
    lua_shared_dict my_worker_events 8m;
    init_worker_by_lua_block {

        local we = require "resty.worker.events"
        local ok, err = we.configure({
            shm = "my_worker_events",
            interval = 0.1
        })
        if not ok then
            ngx.log(ngx.ERR, "failed to configure worker events: ", err)
            return
        end

        local healthcheck = require("resty.healthcheck")
        local checker = healthcheck.new({
            name = "testing",
            shm_name = "test_shm",
            checks = {
                active = {
                    type = "https",
                    http_path = "/status",
                    healthy  = {
                        interval = 2,
                        successes = 1,
                    },
                    unhealthy  = {
                        interval = 1,
                        http_failures = 2,
                    }
                },
            }
        })

        local ok, err = checker:add_target("127.0.0.1", 8080, "example.com", false)

        local handler = function(target, eventname, sourcename, pid)
            ngx.log(ngx.DEBUG,"Event from: ", sourcename)
            if eventname == checker.events.remove
                -- a target was removed
                ngx.log(ngx.DEBUG,"Target removed: ",
                    target.ip, ":", target.port, " ", target.hostname)
            elseif eventname == checker.events.healthy
                -- target changed state, or was added
                ngx.log(ngx.DEBUG,"Target switched to healthy: ",
                    target.ip, ":", target.port, " ", target.hostname)
            elseif eventname ==  checker.events.unhealthy
                -- target changed state, or was added
                ngx.log(ngx.DEBUG,"Target switched to unhealthy: ",
                    target.ip, ":", target.port, " ", target.hostname)
            else
                -- unknown event
            end
        end
    }
}

Description

This library supports performing active and passive health checks on arbitrary hosts.

Control of the library happens via its programmatic API. Consumption of its events happens via the lua-resty-worker-events library.

Targets are added using checker:add_target(host, port). Changes in status ("healthy" or "unhealthy") are broadcasted via worker-events.

Active checks are executed in the background based on the specified timer intervals.

For passive health checks, the library receives explicit notifications via its programmatic API using functions such as checker:report_http_status(host, port, status).

See the online LDoc documentation for the complete API.

Async behaviour

Since this library heavily uses the SHM to share data between workers, it must use locks. The locks themselves need access to ngx.sleep which is not available in all contexts. Most notably not during startup; init and init_worker.

The library will try and acquire the lock and update, but if it fails it will schedule an async update (timer with delay 0).

One workaround for this in the initial phases would be to replace ngx.sleep with a version that does a blocking sleep in init/init_worker. This will enable the usage of locks in those phases.

History

Versioning is strictly based on Semantic Versioning

Releasing new versions:

• update changelog below (PR's should be merged including a changelog entry)
• based on changelog determine new SemVer version
• create a new rockspec
• render the docs using ldoc (don't do this within PR's)
• commit as "release x.x.x" (do not include rockspec revision)
• tag the commit with "x.x.x" (do not include rockspec revision)
• push commit and tag
• upload rock to luarocks: luarocks upload rockspecs/[name] --api-key=abc

2.0.0 (22-Sep-2020)

• BREAKING: fallback for deprecated top-level field type is now removed (deprecated since 0.5.0) #56
• BREAKING: Bump lua-resty-worker-events dependency to 2.0.0. This makes a lot of the APIs in this library asynchronous as the worker events post and post_local won't anymore call poll on a running worker automatically, for more information, see: https://github.com/Kong/lua-resty-worker-events#200-16-september-2020
• BREAKING: tcp_failures can no longer be 0 on http(s) checks (unless http(s)_failures are also set to 0) #55
• feature: Added support for https_sni #49
• fix: properly log line numbers by using tail calls #29
• fix: when not providing a hostname, use IP #48
• fix: makefile; make install
• feature: added a status version field #54
• feature: add headers for probe request #54
• fix: exit early when reloading during a probe #47
• fix: prevent target-list from being nil, due to async behaviour #44
• fix: replace timer and node-wide locks with resty-timer, to prevent interval skips #59
• change: added additional logging on posting events #25
• fix: do not run out of timers during init/init_worker when adding a vast amount of targets #57
• fix: do not call on the module table, but use a method for locks. Also in #57

1.5.1 (23-Mar-2022)

• Fix: avoid breaking active health checks when adding or removing targets. #93

1.5.0 (09-Feb-2022)

• New option checks.active.headers supports one or more lists of values indexed by header name. #87
• Introduce dealyed_clear() function, used to remove addresses after a time interval. This function may be used when an address is being removed but may be added again before the interval expires, keeping its health status. #88

1.4.3 (31-Mar-2022)

• Fix: avoid breaking active health checks when adding or removing targets. #100

1.4.2 (29-Jun-2021)

• Fix: prevent new active checks being scheduled while a health check is running. #72
• Fix: remove event watcher when stopping an active health check. #74; fixes Kong issue #7406

1.4.1 (17-Feb-2021)

• Fix: make sure that a single worker will actively check hosts' statuses. #67

1.4.0 (07-Jan-2021)

• Use a single timer to actively health check targets. This reduces the number of timers used by health checkers, as they used to use two timers by each target. #62

1.3.0 (17-Jun-2020)

• Adds support to mTLS to active healthchecks. This feature can be used adding the fields ssl_cert and ssl_key, with certificate and key respectively, when creating a new healthcheck object. #41

1.2.0 (13-Feb-2020)

• Adds set_all_target_statuses_for_hostname, which sets the targets for all entries with a given hostname at once.

1.1.2 (19-Dec-2019)

• Fix: when ngx.sleep API is not available (e.g. in the log phase) it is not possible to lock using lua-resty-lock and any function that needs exclusive access would fail. This fix adds a retry method that starts a new light thread, which has access to ngx.sleep, to lock the critical path. #37;

1.1.1 (14-Nov-2019)

• Fix: fail when it is not possible to get exclusive access to the list of targets. This fix prevents that workers get to an inconsistent state. #34;

1.1.0 (30-Sep-2019)

• Add support for setting the custom Host header to be used for active checks.
• Fix: log error on SSL Handshake failure #28;

1.0.0 (05-Jul-2019)

• BREAKING: all API functions related to hosts require a hostname argument now. This way different hostnames listening on the same IP and ports combination do not have an effect on each other.
• Fix: fix reporting active TCP probe successes #20; fixes issue #19

0.6.1 (04-Apr-2019)

• Fix: set up event callback only after target list is loaded #18; fixes Kong issue #4453

0.6.0 (26-Sep-2018)

• Introduce checks.active.https_verify_certificate field. It is true by default; setting it to false disables certificate verification in active healthchecks over HTTPS.

0.5.0 (25-Jul-2018)

• Add support for https -- thanks @gaetanfl for the PR!
• Introduce separate checks.active.type and checks.passive.type fields; the top-level type field is still supported as a fallback but is now deprecated.

0.4.2 (23-May-2018)

• Fix Host header in active healthchecks

0.4.1 (21-May-2018)

• Fix internal management of healthcheck counters

0.4.0 (20-Mar-2018)

• Correct setting of defaults in http_statuses
• Type and bounds checking to checks table

0.3.0 (18-Dec-2017)

• Disable individual checks by setting their counters to 0

0.2.0 (30-Nov-2017)

• Adds set_target_status

0.1.0 (27-Nov-2017) Initial release

• Initial upload

Copyright and License

Copyright 2017-2022 Kong Inc.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

   http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.