• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

geoffleyland/luatrace: A tool for tracing Lua script execution and analysing tim ...

原作者: [db:作者] 来自: 网络 收藏 邀请

开源软件名称(OpenSource Name):

geoffleyland/luatrace

开源软件地址(OpenSource Url):

https://github.com/geoffleyland/luatrace

开源编程语言(OpenSource Language):

Lua 90.0%

开源软件介绍(OpenSource Introduction):

luatrace - tracing, profiling and coverage for Lua

1. What?

luatrace is a Lua module that collects information about what your code is doing and how long it takes, and can analyse that information to generate profile and coverage reports.

luatrace adds a layer on top of Lua's debug hooks to make it easier to collect information for profiling and coverage analysis. luatrace traces of every line executed, not just calls.

luatrace can trace through coroutine resumes and yields, and through xpcalls, pcalls and errors. On some platforms it uses high resolution timers to collect times of the order of nanoseconds.

To use it, install luatrace with sudo make install, run your code with lua -luatrace <your lua file> and then analyse it with luatrace.profile. The profiler will display a list of the top 20 functions by time, and write a copy of all the source traced annotated with times for each line.

Alternatively, you can local luatrace = require("luatrace") and surround the code you wish to trace with luatrace.tron() and luatrace.troff().

If you wish to use the profiler directly rather than on a trace file you can use lua -luatrace.profile <your lua file> or local luatrace = require("luatrace.profile").

You can pass settings to luatrace.tron. Probably the only interesting one is the name of the file to write the trace to, for example, you might have Lua code that calls luatrace.tron{trace_file_name="mytrace.txt"}. Later, you can run the profiler on this trace with the command-line luatrace.profile mytrace.txt.

luatrace runs under "plain" Lua and LuaJIT with the -joff option (LuaJIT doesn't call hooks in compiled code, and luatrace loses track of where it's up to)

luatrace is brought to you by Incremental ([email protected]) and is available under the MIT Licence.

2. How?

luatrace is separated into two parts - the trace collector, and the backends that record and process the traces.

The trace collector uses Lua's debug hooks and adds timing information and a little bit of processing to make the traces easier to use.

Timing is provided in one of three ways:

  • Lua - with a debug hook calling os.clock
  • LuaJIT - with a debug hook calling ffi.C.clock - os.clock is not yet implemented as a fast function
  • Lua and LuaJIT - if the c_hook has been built then that's used instead of the Lua or LuaJIT hook. It's always better to use the C hook.

By default the C hook uses the C library's clock and should call it closer to actual code execution, so the traces should be more accurate. On some plaforms the C hook uses a high-resolution timer:

  • On mach plaforms (ie OS X), the c_hook uses the mach_absolute_time
  • On Linux, it uses clock_gettime
  • On Windows, it uses QueryPerformanceCounter

However, although the timing might be collected at nanosecond resolution, there are many reasons why profiles are not accurate to within a nanosecond!

The collector outputs traces by calling a recorder's record function with a range of arguments:

  • ("S", <filename>, <line>) - the trace has started somewhere in a function defined on line
  • (">", <filename>, <line>) - there's been a call to a function defined on line
  • ("T", <filename>, <line>) - there's been a tailcall to a function defined on line (LuaJIT only)
  • ("<") - return from a function
  • ("R", <thread_id>) - Resume the thread thread_id
  • ("Y") - Yield
  • ("P") - pcall - the current line is protected for the duration of the following call
  • ("E") - Error - unwind the stack looking for a "P"
  • (<line>, <time in microseconds>) - this many microseconds were just spent on this line of the current file

At the moment, there's two recorders - luatrace.trace_file and luatrace.profile.

trace_file is the default backend. It just writes the trace out to a file in a simple format, which it can also read. When it reads a file, it reads it to another recorder as if the recorder were watching the program execute.

profile provides limited profile information.

Backends will improve as I need them or as you patch/fork.

3. Requirements

Lua or LuaJIT.

4. Issues

  • It's really slow
  • Tracing is overcomplicated and has to check the stack depth too frequently
  • Profiling is very complicated when there's a lot on one line (one line functions)
  • Times probably aren't accurate because of the time spent getting between user code and the hooks
  • There aren't many backends

5. Wishlist

  • More of the hook should be in C
  • It would be nice if the recorder was in a separate Lua state and a separate thread

6. Alternatives

See the Lua Wiki for a list of profiling alternatives. luacov provides coverage analysis.

-jannotate - Annotate code with LuaJIT trace information

1. What?

annotate.lua collects information about the traces LuaJIT is attempting and summarises that information in a format that doesn't contain as much information as -jdump, but which might be more useful for you.

annotate.lua is installed with luatrace. To use it, luajit -jannotate mylua.lua. When your program exits, it will write a report to stdout detailing how many traces were attempted, how many were successful and how many were aborted. For the aborted traces, you'll get summaries of the reasons for the aborts, and the lines that caused the aborts.

The report then lists bytecode for all the traces next to the source code. This listing is a little problematic, since bytecode order doesn't necessarily match source order, and traces cross function boundaries. The traces are listed in source order as much as practicable to make them easier to read.

If you want to write the report to a separate file, then luajit -jannotate=report.txt.

You can also use annotate.lua as a module:

local annotate = require("jit.annotate")
annotate.on()
...
annotate.off()
annotate.report(io.open("report.txt", "w"))

2. Requirements

LuaJIT (this won't work with plain Lua)

3. Wishlist

  • It'd be nice to incorporate timing information from a profiler

4. Alternatives

-jdump, -jbc, -jv etc

LuaJIT trace API

-jannotate uses some internal LuaJIT APIs. These are not intended for public use, and are subject to change without notice, however, here's some of what I've managed to learn. What follows is a bit rough, inaccurate, and very incomplete. These functions are used in several of the -j library files. dump.lua is probably a good place to start if you're looking for more information

jit.attach

You can attach callbacks to a number of compiler events with jit.attach. The callback can be called:

  • when a function has been compiled to bytecode ("bc");
  • when trace recording starts or stops ("trace");
  • as a trace is being recorded ("record");
  • or when a trace exits through a side exit ("texit").

Set a callback with jit.attach(callback, "event") and clear the same callback with jit.attach(callback)

The arguments passed to the callback depend on the event being reported:

  • "bc": callback(func). func is the function that's just been recorded.
  • "trace": callback(what, tr, func, pc, otr, oex)
    • what is a description of the trace event: "flush", "start", "stop", "abort". Available for all events.
    • tr is the trace number. Not available for flush.
    • func is the function being traced. Available for start and abort.
    • pc is the program counter - the bytecode number of the function being recorded (if this a Lua function). Available for start and abort.
    • otr start: the parent trace number if this is a side trace, abort: abort code (integer)?
    • oex start: the exit number for the parent trace, abort: abort reason (string)
  • "record": callback(tr, func, pc, depth). The first arguments are the same as for trace start. depth is the depth of the inlining of the current bytecode.
  • "texit": callback(tr, ex, ngpr, nfpr).
    • tr is the trace number as before
    • ex is the exit number
    • ngpr and nfpr are the number of general-purpose and floating point registers that are active at the exit.

jit.util.funcinfo(func, pc)

When passed func and pc from a jit.attach callback, jit.util.funcinfo returns a table of information about the function, much like debug.getinfo.

The fields of the table are:

  • linedefined: as for debug.getinfo
  • lastlinedefined: as for debug.getinfo
  • params: the number of parameters the function takes
  • stackslots: the number of stack slots the function's local variable use
  • upvalues: the number of upvalues the function uses
  • bytecodes: the number of bytecodes it the compiled function
  • gcconsts: ??
  • nconsts: ??
  • currentline: as for debug.getinfo
  • isvararg: if the function is a vararg function`
  • source: as for debug.getinfo
  • loc: a string describing the source and currentline, like "<source>:<line>"
  • ffid: the fast function id of the function (if it is one). In this case only upvalues above and addr below are valid
  • addr: the address of the function (if it is not a Lua function). If it's a C function rather than a fast function, only upvalues above is valid



鲜花

握手

雷人

路过

鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
上一篇:
cloudwu/lua-trace: Trace for debug lua发布时间:2022-08-16
下一篇:
kingluo/luajit.io: luajit io framework发布时间:2022-08-16
热门推荐
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap