开源软件名称（OpenSource Name）：

开源软件地址(OpenSource Url)：

开源编程语言(OpenSource Language)：

开源软件介绍(OpenSource Introduction)：

Vim Markdown

Syntax highlighting, matching rules and mappings for the original Markdown and extensions.

1. Installation
2. Basic usage
3. Options
4. Mappings
5. Commands
6. Credits
7. License

Installation

If you use Vundle, add the following lines to your ~/.vimrc:

Plugin 'godlygeek/tabular'
Plugin 'preservim/vim-markdown'

The tabular plugin must come before vim-markdown.

Then run inside Vim:

:so ~/.vimrc
:PluginInstall

If you use Pathogen, do this:

cd ~/.vim/bundle
git clone https://github.com/preservim/vim-markdown.git

To install without Pathogen using the Debian vim-addon-manager, do this:

git clone https://github.com/preservim/vim-markdown.git
cd vim-markdown
sudo make install
vim-addon-manager install markdown

If you are not using any package manager, download the tarball and do this:

cd ~/.vim
tar --strip=1 -zxf vim-markdown-master.tar.gz

Basic usage

Folding

Folding is enabled for headers by default.

The following commands are useful to open and close folds:

• zr: reduces fold level throughout the buffer
• zR: opens all folds
• zm: increases fold level throughout the buffer
• zM: folds everything all the way
• za: open a fold your cursor is on
• zA: open a fold your cursor is on recursively
• zc: close a fold your cursor is on
• zC: close a fold your cursor is on recursively

Options are available to disable folding or change folding style.

Try :help fold-expr and :help fold-commands for details.

Concealing

Concealing is set for some syntax such as bold, italic, code block and link.

Concealing lets you conceal text with other text. The actual source text is not modified. If you put your cursor on the concealed line, the conceal goes away.

Options are available to disable or change concealing.

Try :help concealcursor and :help conceallevel for details.

Options

Disable Folding

• g:vim_markdown_folding_disabled

  Add the following line to your .vimrc to disable the folding configuration:

  let g:vim_markdown_folding_disabled = 1
  

  This option only controls Vim Markdown specific folding configuration.

  To enable/disable folding use Vim's standard folding configuration.

  set [no]foldenable
  

Change fold style

• g:vim_markdown_folding_style_pythonic

  To fold in a style like python-mode, add the following to your .vimrc:

  let g:vim_markdown_folding_style_pythonic = 1
  

  g:vim_markdown_folding_level setting (default 1) is set to foldlevel. Thus level 1 heading which is served as a document title is expanded by default.

• g:vim_markdown_override_foldtext

  To prevent foldtext from being set add the following to your .vimrc:

  let g:vim_markdown_override_foldtext = 0
  

Set header folding level

• g:vim_markdown_folding_level

  Folding level is a number between 1 and 6. By default, if not specified, it is set to 1.

  let g:vim_markdown_folding_level = 6
  

  Tip: it can be changed on the fly with:

  :let g:vim_markdown_folding_level = 1
  :edit
  

Disable Default Key Mappings

• g:vim_markdown_no_default_key_mappings

  Add the following line to your .vimrc to disable default key mappings:

  let g:vim_markdown_no_default_key_mappings = 1
  

  You can also map them by yourself with <Plug> mappings.

Enable TOC window auto-fit

• g:vim_markdown_toc_autofit

  Allow for the TOC window to auto-fit when it's possible for it to shrink. It never increases its default size (half screen), it only shrinks.

  let g:vim_markdown_toc_autofit = 1
  

Text emphasis restriction to single-lines

• g:vim_markdown_emphasis_multiline

  By default text emphasis works across multiple lines until a closing token is found. However, it's possible to restrict text emphasis to a single line (i.e., for it to be applied a closing token must be found on the same line). To do so:

  let g:vim_markdown_emphasis_multiline = 0
  

Syntax Concealing

• g:vim_markdown_conceal

  Concealing is set for some syntax.

  For example, conceal [link text](link url) as just link text. Also, _italic_ and *italic* will conceal to just italic. Similarly __bold__, **bold**, ___italic bold___, and ***italic bold*** will conceal to just bold, bold, italic bold, and italic bold respectively.

  To enable conceal use Vim's standard conceal configuration.

  set conceallevel=2
  

  To disable conceal regardless of conceallevel setting, add the following to your .vimrc:

  let g:vim_markdown_conceal = 0
  

  To disable math conceal with LaTeX math syntax enabled, add the following to your .vimrc:

  let g:tex_conceal = ""
  let g:vim_markdown_math = 1
  

• g:vim_markdown_conceal_code_blocks

  Disabling conceal for code fences requires an additional setting:

  let g:vim_markdown_conceal_code_blocks = 0
  

Fenced code block languages

• g:vim_markdown_fenced_languages

  You can use filetype name as fenced code block languages for syntax highlighting. If you want to use different name from filetype, you can add it in your .vimrc like so:

  let g:vim_markdown_fenced_languages = ['csharp=cs']
  

  This will cause the following to be highlighted using the cs filetype syntax.

  ```csharp
  ...
  ```
  

  Default is ['c++=cpp', 'viml=vim', 'bash=sh', 'ini=dosini'].

Follow named anchors

• g:vim_markdown_follow_anchor

  This feature allows the ge command to follow named anchors in links of the form file#anchor or just #anchor, where file may omit the .md extension as usual. Two variables control its operation:

  let g:vim_markdown_follow_anchor = 1
  

  This tells vim-markdown whether to attempt to follow a named anchor in a link or not. When it is 1, and only if a link can be split in two parts by the pattern '#', then the first part is interpreted as the file and the second one as the named anchor. This also includes urls of the form #anchor, for which the first part is considered empty, meaning that the target file is the current one. After the file is opened, the anchor will be searched.

  Default is 0.

• g:vim_markdown_anchorexpr

  let g:vim_markdown_anchorexpr = "'<<'.v:anchor.'>>'"
  

  This expression will be evaluated substituting v:anchor with a quoted string that contains the anchor to visit. The result of the evaluation will become the real anchor to search in the target file. This is useful in order to convert anchors of the form, say, my-section-title to searches of the form My Section Title or <<my-section-title>>.

  Default is ''.

Syntax extensions

The following options control which syntax extensions will be turned on. They are off by default.

LaTeX math

• g:vim_markdown_math

  Used as $x^2$, $$x^2$$, escapable as \$x\$ and \$\$x\$\$.

  let g:vim_markdown_math = 1
  

YAML Front Matter

• g:vim_markdown_frontmatter

  Highlight YAML front matter as used by Jekyll or Hugo.

  let g:vim_markdown_frontmatter = 1
  

TOML Front Matter

• g:vim_markdown_toml_frontmatter

  Highlight TOML front matter as used by Hugo.

  TOML syntax highlight requires vim-toml.

  let g:vim_markdown_toml_frontmatter = 1
  

JSON Front Matter

• g:vim_markdown_json_frontmatter

  Highlight JSON front matter as used by Hugo.

  JSON syntax highlight requires vim-json.

  let g:vim_markdown_json_frontmatter = 1
  

Strikethrough

• g:vim_markdown_strikethrough

  Strikethrough uses two tildes. ~~Scratch this.~~

  let g:vim_markdown_strikethrough = 1
  

Adjust new list item indent

• g:vim_markdown_new_list_item_indent

  You can adjust a new list indent. For example, you insert a single line like below:

  * item1
  

  Then if you type o to insert new line in vim and type * item2, the result will be:

  * item1
      * item2
  

  vim-markdown automatically insert the indent. By default, the number of spaces of indent is 4. If you'd like to change the number as 2, just write:

  let g:vim_markdown_new_list_item_indent = 2
  

Do not require .md extensions for Markdown links

• g:vim_markdown_no_extensions_in_markdown

  If you want to have a link like this [link text](link-url) and follow it for editing in vim using the ge command, but have it open the file "link-url.md" instead of the file "link-url", then use this option:

  let g:vim_markdown_no_extensions_in_markdown = 1
  

  This is super useful for GitLab and GitHub wiki repositories.

  Normal behaviour would be that vim-markup required you to do this [link text](link-url.md), but this is not how the Gitlab and GitHub wiki repositories work. So this option adds some consistency between the two.

Auto-write when following link

• g:vim_markdown_autowrite

  If you follow a link like this [link text](link-url) using the ge shortcut, this option will automatically save any edits you made before moving you:

  let g:vim_markdown_autowrite = 1
  

Change default file extension

• g:vim_markdown_auto_extension_ext

  If you would like to use a file extension other than .md you may do so using the vim_markdown_auto_extension_ext variable:

  let g:vim_markdown_auto_extension_ext = 'txt'
  

Do not automatically insert bulletpoints

• g:vim_markdown_auto_insert_bullets

  Automatically inserting bulletpoints can lead to problems when wrapping text (see issue #232 for details), so it can be disabled:

  let g:vim_markdown_auto_insert_bullets = 0
  

  In that case, you probably also want to set the new list item indent to 0 as well, or you will have to remove an indent each time you add a new list item:

  let g:vim_markdown_new_list_item_indent = 0
  

Change how to open new files

• g:vim_markdown_edit_url_in

  By default when following a link the target file will be opened in your current buffer. This behavior can change if you prefer using splits or tabs by using the vim_markdown_edit_url_in variable. Possible values are tab, vsplit, hsplit, current opening in a new tab, vertical split, horizontal split, and current buffer respectively. Defaults to current buffer if not set:

  let g:vim_markdown_edit_url_in = 'tab'
  

Mappings

The following work on normal and visual modes:

• gx: open the link under the cursor in the same browser as the standard gx command. <Plug>Markdown_OpenUrlUnderCursor

  The standard gx is extended by allowing you to put your cursor anywhere inside a link.

  For example, all the following cursor positions will work:

  [Example](http://example.com)
  ^  ^    ^^   ^       ^
  1  2    34   5       6
  
  <http://example.com>
  ^  ^               ^
  1  2               3
  

  Known limitation: does not work for links that span multiple lines.

• ge: open the link under the cursor in Vim for editing. Useful for relative markdown links. Falls back to gf with force editing, if not on a markdown link. <Plug>Markdown_EditUrlUnderCursor

  The rules for the cursor position are the same as the gx command.

• ]]: go to next header. <Plug>Markdown_MoveToNextHeader

• [[: go to previous header. Contrast with ]h. <Plug>Markdown_MoveToPreviousHeader

• ][: go to next sibling header if any. <Plug>Markdown_MoveToNextSiblingHeader

• []: go to previous sibling header if any. <Plug>Markdown_MoveToPreviousSiblingHeader

• ]h: go to Current header. <Plug>Markdown_MoveToCurHeader

• ]u: go to parent header (Up). <Plug>Markdown_MoveToParentHeader

This plugin follows the recommended Vim plugin mapping interface, so to change the map ]u to asdf, add to your .vimrc:

map asdf <Plug>Markdown_MoveToParentHeader

To disable a map use:

map <Plug> <Plug>Markdown_MoveToParentHeader

Commands

The following requires :filetype plugin on.

• :HeaderDecrease:

  Decrease level of all headers in buffer: h2 to h1, h3 to h2, etc.

  If range is given, only operate in the range.

  If an h1 would be decreased, abort.

  For simplicity of implementation, Setex headers are converted to Atx.

• :HeaderIncrease: Analogous to :HeaderDecrease, but increase levels instead.

• :SetexToAtx:

  Convert all Setex style headers in buffer to Atx.

  If a range is given, e.g. hit : from visual mode, only operate on the range.

• :TableFormat: Format the table under the cursor like this.

  Requires Tabular.

  The input table must already have a separator line as the second line of the table. That line only needs to contain the correct pipes |, nothing else is required.

• :Toc: create a quickfix vertical window navigable table of contents with the headers.

  Hit <Enter> on a line to jump to the corresponding line of the markdown file.

• :Toch: Same as :Toc but in an horizontal window.

• :Toct: Same as :Toc but in a new tab.

• :Tocv: Same as :Toc for symmetry with :Toch and :Tocv.

• :InsertToc: Insert table of contents at the current line.

  An optional argument can be used to specify how many levels of headers to display in the table of content, e.g., to display up to and including h3, use :InsertToc 3.

• :InsertNToc: Same as :InsertToc, but the format of h2 headers in the table of contents is a numbered list, rather than a bulleted list.

Credits

The main contributors of vim-markdown are:

• Ben Williams (A.K.A. @plasticboy). The original developer of vim-markdown. Homepage.

If you feel that your name should be on this list, please make a pull request listing your contributions.

License

The MIT License (MIT)

Copyright (c) 2012 Benjamin D. Williams

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.