OStack程序员社区-中国程序员成长平台

标题: iphone - 如何在ios中将FLAC文件转换为wav文件？ [打印本页]

---

作者: 菜鸟教程小白    时间: 2022-12-13 02:18
标题: iphone - 如何在ios中将FLAC文件转换为wav文件？

我想创建一个支持 Flac 格式的音频文件的音频播放器。为此我尝试实现 flac 到 wav 转换的算法，如下所示

请帮帮我。

它总是给我错误

错误:初始化解码器:FLAC__STREAM_DECODER_INIT_STATUS_ERROR_OPENING_FILE

static FLAC__bool write_little_endian_uint16(FILE *f, FLAC__uint16 x)
{
return
fputc(x, f) != EOF &&
fputc(x >> 8, f) != EOF
;
}

static FLAC__bool write_little_endian_int16(FILE *f, FLAC__int16 x)
{
return write_little_endian_uint16(f, (FLAC__uint16)x);
}

static FLAC__bool write_little_endian_uint32(FILE *f, FLAC__uint32 x)
{
return
fputc(x, f) != EOF &&
fputc(x >> 8, f) != EOF &&
fputc(x >> 16, f) != EOF &&
fputc(x >> 24, f) != EOF
;
}

int main(int argc, char *argv[])
{
const char *input = "demo_audio_shaer.flac";
printf("aa[0]====%s",argv[0]);

FLAC__bool ok = true;
FLAC__StreamDecoder *decoder = 0;
FLAC__StreamDecoderInitStatus init_status;
FILE *fout;

if((fout = fopen(argv[2], "wb")) == NULL) {
    fprintf(stderr, "ERROR: opening %s for output\n", argv[2]);
    return 1;
}

if((decoder = FLAC__stream_decoder_new()) == NULL) {
    fprintf(stderr, "ERROR: allocating decoder\n");
    fclose(fout);
    return 1;
}

(void)FLAC__stream_decoder_set_md5_checking(decoder, true);
init_status = FLAC__stream_decoder_init_file(decoder, input, write_callback, metadata_callback, error_callback, /*client_data=*/fout);
if(init_status != FLAC__STREAM_DECODER_INIT_STATUS_OK) {
    fprintf(stderr, "ERROR: initializing decoder: %s\n", FLAC__StreamDecoderInitStatusString[init_status]);
    ok = false;
}

if(ok) {
    ok = FLAC__stream_decoder_process_until_end_of_stream(decoder);
    fprintf(stderr, "decoding: %s\n", ok? "succeeded" : "FAILED");

    fprintf(stderr, "   state: %s\n", FLAC__StreamDecoderStateString[FLAC__stream_decoder_get_state(decoder)]);
}

FLAC__stream_decoder_delete(decoder);
fclose(fout);

return 0;
}

FLAC__StreamDecoderWriteStatus write_callback(const FLAC__StreamDecoder *decoder, const                 FLAC__Frame *frame, const FLAC__int32 * const buffer[], void *client_data)
{
FILE *f = (FILE*)client_data;
const FLAC__uint32 total_size = (FLAC__uint32)(total_samples * channels * (bps/8));
size_t i;

(void)decoder;

if(total_samples == 0) {
    fprintf(stderr, "ERROR: this example only works for FLAC files that have a total_samples count in STREAMINFO\n");
    return FLAC__STREAM_DECODER_WRITE_STATUS_ABORT;
}
if(channels != 2 || bps != 16) {
    fprintf(stderr, "ERROR: this example only supports 16bit stereo streams\n");
    return FLAC__STREAM_DECODER_WRITE_STATUS_ABORT;
}

/* write WAVE header before we write the first frame */
if(frame->header.number.sample_number == 0) {
    if(
       fwrite("RIFF", 1, 4, f) < 4 ||
       !write_little_endian_uint32(f, total_size + 36) ||
       fwrite("WAVEfmt ", 1, 8, f) < 8 ||
       !write_little_endian_uint32(f, 16) ||
       !write_little_endian_uint16(f, 1) ||
       !write_little_endian_uint16(f, (FLAC__uint16)channels) ||
       !write_little_endian_uint32(f, sample_rate) ||
       !write_little_endian_uint32(f, sample_rate * channels * (bps/8)) ||
       !write_little_endian_uint16(f, (FLAC__uint16)(channels * (bps/8))) || /* block align */
       !write_little_endian_uint16(f, (FLAC__uint16)bps) ||
       fwrite("data", 1, 4, f) < 4 ||
       !write_little_endian_uint32(f, total_size)
       )
    {
        fprintf(stderr, "ERROR: write error\n");
        return FLAC__STREAM_DECODER_WRITE_STATUS_ABORT;
    }
}

/* write decoded PCM samples */
for(i = 0; i < frame->header.blocksize; i++) {
    if(
       !write_little_endian_int16(f, (FLAC__int16)buffer[0][i]) ||  /* left channel */
       !write_little_endian_int16(f, (FLAC__int16)buffer[1][i])     /* right channel */
       ) {
        fprintf(stderr, "ERROR: write error\n");
        return FLAC__STREAM_DECODER_WRITE_STATUS_ABORT;
    }
}

return FLAC__STREAM_DECODER_WRITE_STATUS_CONTINUE;
}

void metadata_callback(const FLAC__StreamDecoder *decoder, const FLAC__StreamMetadata *metadata, void *client_data)
{
(void)decoder, (void)client_data;

/* print some stats */
if(metadata->type == FLAC__METADATA_TYPE_STREAMINFO) {
    /* save for later */
    total_samples = metadata->data.stream_info.total_samples;
    sample_rate = metadata->data.stream_info.sample_rate;
    channels = metadata->data.stream_info.channels;
    bps = metadata->data.stream_info.bits_per_sample;

    fprintf(stderr, "sample rate    : %u Hz\n", sample_rate);
    fprintf(stderr, "channels       : %u\n", channels);
    fprintf(stderr, "bits per sample: %u\n", bps);
#ifdef _MSC_VER
    fprintf(stderr, "total samples  : %I64u\n", total_samples);
#else
    fprintf(stderr, "total samples  : %llu\n", total_samples);
#endif
}
}

void error_callback(const FLAC__StreamDecoder *decoder, FLAC__StreamDecoderErrorStatus status, void *client_data)
{
(void)decoder, (void)client_data;

fprintf(stderr, "Got error callback: %s\n", FLAC__StreamDecoderErrorStatusString[status]);
}

---

Best Answer-推荐答案

我可以提出我的解决方案。 https://github.com/Krivoblotsky/KSAudioPlayer

它支持 *.flac 和许多其他文件格式。

关于iphone - 如何在ios中将FLAC文件转换为wav文件？，我们在Stack Overflow上找到一个类似的问题： https://stackoverflow.com/questions/16080888/

---

欢迎光临 OStack程序员社区-中国程序员成长平台 (https://ostack.cn/)

Powered by Discuz! X3.4