请选择 进入手机版 | 继续访问电脑版
  • 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号

ios - NaN 会导致这个核心音频 iOS 应用程序偶尔崩溃吗?

[复制链接]
菜鸟教程小白 发表于 2022-12-13 16:59:02 | 显示全部楼层 |阅读模式 打印 上一主题 下一主题

我的第一个应用合成了music audio from a sine look-up table使用自 iOS 6 以来不推荐使用的方法。我刚刚对其进行了修改,以解决关于 AudioSession 的警告,由 this blog 提供帮助以及关于 AVFoundationFramework 的 Apple 指南。 Audio Session 警告现已得到解决,该应用程序会像以前一样产生音频。它目前在 iOS 9 下运行。

但是,该应用偶尔会无缘无故地崩溃。我 checkout this SO post但它似乎处理访问而不是生成原始音频数据,所以它可能没有处理时间问题。我怀疑存在缓冲问题,但在更改或微调代码中的任何内容之前,我需要了解这可能是什么。

我有一个将修改后的应用程序提供给用户的最后期限,因此我非常感谢处理过类似问题的人的来信。

这就是问题所在。该应用程序在模拟器报告中进入调试:

com.apple.coreaudio.AQClient (8):EXC_BAD_ACCESS (code=1, address=0xffffffff10626000)

在调试导航器的线程 8 (com.apple.coreaudio.AQClient (8)) 中,它报告:

    0 -[Synth fillBuffer:frames:]
    1 -[PlayView audioBufferPlayer:fillBuffer:format:]
    2 playCallback

fillBuffer中这行代码高亮显示

    float sineValue = (1.0f - b)*sine[a] + b*sine[c];

...audioBufferPlayer 中的这行代码也是如此

    int packetsWritten = [synth fillBuffer:buffer->mAudioData frames:packetsPerBuffer];

... 和 playCallBack

    [player.delegate audioBufferPlayer:player fillBuffer:inBuffer format:player.audioFormat];

这里是 audioBufferPlayer 的代码(委托(delegate),与 above 中的演示基本相同)。

    - (void)audioBufferPlayerAudioBufferPlayer*)audioBufferPlayer fillBufferAudioQueueBufferRef)buffer formatAudioStreamBasicDescription)audioFormat            
    {
    [synthLock lock];
    int packetsPerBuffer = buffer->mAudioDataBytesCapacity / audioFormat.mBytesPerPacket;
    int packetsWritten = [synth fillBuffer:buffer->mAudioData frames:packetsPerBuffer];
    buffer->mAudioDataByteSize = packetsWritten * audioFormat.mBytesPerPacket;    
    [synthLock unlock];

    }

...(在 myViewController 中初始化)

- (id)init
{    
    if ((self = [super init])) {
    // The audio buffer is managed (filled up etc.) within its own thread (Audio Queue thread)
    // Since we are also responding to changes from the GUI, we need a lock so both threads
    // do not attempt to change the same value independently.

        synthLock = [[NSLock alloc] init];

    // Synth and the AudioBufferPlayer must use the same sample rate.

        float sampleRate = 44100.0f;

    // Initialise synth to fill the audio buffer with audio samples.

        synth = [[Synth alloc] initWithSampleRate:sampleRate];

    // Initialise note buttons

        buttons = [[NSMutableArray alloc] init];

    // Initialise the audio buffer.

        player = [[AudioBufferPlayer alloc] initWithSampleRate:sampleRate channels:1 bitsPerChannel:16 packetsPerBuffer:1024];
        player.delegate = self;
        player.gain = 0.9f;
        [[AVAudioSession sharedInstance] setActive:YES error:nil];

    }
    return self;
}   // initialisation

... 以及用于 playCallback

static void playCallback( void* inUserData, AudioQueueRef inAudioQueue, AudioQueueBufferRef inBuffer)
{
    AudioBufferPlayer* player = (AudioBufferPlayer*) inUserData;
    if (player.playing){
        [player.delegate audioBufferPlayer:player fillBuffer:inBuffer format:player.audioFormat];
        AudioQueueEnqueueBuffer(inAudioQueue, inBuffer, 0, NULL);
    }
}

...这里是用于合成音频的 fillBuffer 代码

- (int)fillBuffervoid*)buffer framesint)frames
{
    SInt16* p = (SInt16*)buffer;

    //  Loop through the frames (or "block size"), then consider each sample for each tone.

    for (int f = 0; f < frames; ++f)
    {
        float m = 0.0f;  // the mixed value for this frame

        for (int n = 0; n < MAX_TONE_EVENTS; ++n)
        {
            if (tones[n].state == STATE_INACTIVE)   // only active tones
                continue;

    // recalculate a 30sec envelope and place in a look-up table
    // Longer notes need to interpolate through the envelope

            int a   = (int)tones[n].envStep;        // integer part  (like a floored float)
            float b = tones[n].envStep - a;         // decimal part  (like doing a modulo)

        // c allows us to calculate if we need to wrap around

            int c = a + 1;                          // (like a ceiling of integer part)
            if (c >= envLength) c = a;              // don't wrap around

    /////////////// LOOK UP ENVELOPE TABLE /////////////////

    //  uses table look-up with interpolation for both level and pitch envelopes
    //  'b' is a value interpolated between 2 successive samples 'a' and 'c')            
    //  first, read values for the level envelope

            float envValue = (1.0f - b)*tones[n].levelEnvelope[a] + b*tones[n].levelEnvelope[c];

    //  then the pitch envelope

            float pitchFactorValue = (1.0f - b)*tones[n].pitchEnvelope[a] + b*tones[n].pitchEnvelope[c];

    //  Advance envelope pointer one step

            tones[n].envStep += tones[n].envDelta;

    //  Turn note off at the end of the envelope.
            if (((int)tones[n].envStep) >= envLength){
                tones[n].state = STATE_INACTIVE;
                continue;
            }

        //  Precalculated Sine look-up table            
            a = (int)tones[n].phase;                    // integer part
            b = tones[n].phase - a;                     // decimal part
            c = a + 1;
            if (c >= sineLength) c -= sineLength;       // wrap around

    ///////////////// LOOK UP OF SINE TABLE ///////////////////

            float sineValue = (1.0f - b)*sine[a] + b*sine[c];

    // Wrap round when we get to the end of the sine look-up table.

            tones[n].phase += (tones[n].frequency * pitchFactorValue); // calculate frequency for each point in the pitch envelope
            if (((int)tones[n].phase) >= sineLength)
                tones[n].phase -= sineLength;

    ////////////////// RAMP NOTE OFF IF IT HAS BEEN UNPRESSED

            if (tones[n].state == STATE_UNPRESSED) {
                tones[n].gain -= 0.0001;                
            if ( tones[n].gain <= 0 ) {
                tones[n].state = STATE_INACTIVE;
                }
            }

    //////////////// FINAL SAMPLE VALUE ///////////////////

            float s = sineValue * envValue * gain * tones[n].gain;

    // Clip the signal, if needed.

            if (s > 1.0f) s = 1.0f;
            else if (s < -1.0f) s = -1.0f;

    // Add the sample to the out-going signal   
        m += s;
        }

    // Write the sample mix to the buffer as a 16-bit word. 
    p[f] = (SInt16)(m * 0x7FFF);
    }
return frames;
}

我不确定这是否是一个红鲱鱼,但我在几个调试寄存器中遇到了 NaN。它似乎发生在计算 fillBuffer 中正弦查找的相位增量时(见上文)。该计算以 44.1 kHz 的采样率对每个样本进行多达十几个分音,并在 iPhone 4 上的 iOS 4 中运行。我在 iOS 9 的模拟器上运行。我所做的唯一更改在这篇文章中进行了描述!



Best Answer-推荐答案


结果证明我的 NaN 问题与 Core Audio 没有直接关系。这是由我的代码的另一个区域的更改引入的边缘条件引起的。真正的问题是在实时计算声音包络的持续时间时尝试除以零。

但是,在尝试确定该问题的原因时,我确信我的 iOS 7 之前的 Audio Session 已被基于 AVFoundation 的工作设置所取代。感谢我的初始代码的来源 Matthijs Hollemans以及 Mario Diana他的博客解释了所需的更改。

起初,我的 iPhone 上的音量明显低于模拟器上的音量,已解决的问题 here由类型转换厂。我发现有必要通过替换 Mario 的

来包含这些改进
    - (BOOL)setUpAudioSession

代工的

    - (void)configureAVAudioSession

希望这可能对其他人有所帮助。

关于ios - NaN 会导致这个核心音频 iOS 应用程序偶尔崩溃吗?,我们在Stack Overflow上找到一个类似的问题: https://stackoverflow.com/questions/37692276/

回复

使用道具 举报

懒得打字嘛,点击右侧快捷回复 【右侧内容,后台自定义】
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

关注0

粉丝2

帖子830918

发布主题
阅读排行 更多
广告位

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服(服务时间 9:00~18:00)

在线QQ客服
地址:深圳市南山区西丽大学城创智工业园
电邮:jeky_zhao#qq.com
移动电话:139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap