cisco - 使用Eigrp连接大型网络，Eigrp条目数是否最大？(Using Eigrp to connect a large Network, is there a max to Eigrp entries ?)

Question

I recently was working on this project designed by myself and i was forming neighbors with the routers via EIGRP.

(我最近正在从事由我自己设计的项目，并且正在通过EIGRP与路由器形成邻居。)

At a point the routers failed to form neighbors, and I was suspecting that Eigrp might have max entries.

(路由器有时无法形成邻居，我怀疑Eigrp可能有最多条目。)

I need help to connect as many networks as possible.

(我需要帮助以连接尽可能多的网络。)

Although it looks impossible from my simulator, I need your experience on this one.

(尽管从我的模拟器看来这是不可能的，但我需要您的经验。)

Feel free to ask for the packet tracer file in case you need to personally work on it.

(如果您需要亲自处理数据包跟踪程序文件，请随时询问。)

Below is the number of eigrp neighbors both dynamic and directly connected on the Engineering router Thanks

(以下是在工程路由器上动态且直接连接的eigrp邻居的数量谢谢)

  ask by The Future translate from so

Answer 1

Well, I can have a look at your pkt file.

(好吧，我可以看一下您的pkt文件。)

Also EIGRP is very much capable of handling somewhere between 5000-10000 router without any specific issues although if he number goes up you might want to consider BGP as it is for larger networks (WAN).

(同样，EIGRP非常有能力处理5000-10000个路由器之间的任何问题而没有任何特定问题，尽管如果他的人数增加，则可能要考虑BGP，因为它适用于大型网络（WAN）。)

Meanwhile, you can try your simulation on GNS and see if it works.

(同时，您可以尝试在GNS上进行模拟，看看是否可行。)

hope that helps.

(希望能有所帮助。)