Golang pb.Message类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/ipfs/go-ipfs/exchange/bitswap/message/pb.Message类的典型用法代码示例。如果您正苦于以下问题：Golang Message类的具体用法？Golang Message怎么用？Golang Message使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了Message类的6个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ToProto

func (m *impl) ToProto() *pb.Message {
	pbm := new(pb.Message)
	pbm.Wantlist = new(pb.Message_Wantlist)
	for _, e := range m.wantlist {
		pbm.Wantlist.Entries = append(pbm.Wantlist.Entries, &pb.Message_Wantlist_Entry{
			Block:    proto.String(string(e.Key)),
			Priority: proto.Int32(int32(e.Priority)),
			Cancel:   proto.Bool(e.Cancel),
		})
	}
	for _, b := range m.Blocks() {
		pbm.Blocks = append(pbm.Blocks, b.Data())
	}
	return pbm
}

开发者ID:ccsblueboy，项目名称:go-ipfs，代码行数:15，代码来源:message.go

示例2: TestNewMessageFromProto

func TestNewMessageFromProto(t *testing.T) {
	const str = "a_key"
	protoMessage := new(pb.Message)
	protoMessage.Wantlist = new(pb.Message_Wantlist)
	protoMessage.Wantlist.Entries = []*pb.Message_Wantlist_Entry{
		{Block: proto.String(str)},
	}
	if !wantlistContains(protoMessage.Wantlist, str) {
		t.Fail()
	}
	m := newMessageFromProto(*protoMessage)
	if !wantlistContains(m.ToProto().GetWantlist(), str) {
		t.Fail()
	}
}

开发者ID:ccsblueboy，项目名称:go-ipfs，代码行数:15，代码来源:message_test.go

示例3: TestNewMessageFromProto

func TestNewMessageFromProto(t *testing.T) {
	str := mkFakeCid("a_key")
	protoMessage := new(pb.Message)
	protoMessage.Wantlist = new(pb.Message_Wantlist)
	protoMessage.Wantlist.Entries = []*pb.Message_Wantlist_Entry{
		{Block: proto.String(str.KeyString())},
	}
	if !wantlistContains(protoMessage.Wantlist, str) {
		t.Fail()
	}
	m, err := newMessageFromProto(*protoMessage)
	if err != nil {
		t.Fatal(err)
	}

	if !wantlistContains(m.ToProtoV0().GetWantlist(), str) {
		t.Fail()
	}
}

开发者ID:tswindell，项目名称:go-ipfs，代码行数:19，代码来源:message_test.go

示例4: ToProtoV1

func (m *impl) ToProtoV1() *pb.Message {
	pbm := new(pb.Message)
	pbm.Wantlist = new(pb.Message_Wantlist)
	for _, e := range m.wantlist {
		pbm.Wantlist.Entries = append(pbm.Wantlist.Entries, &pb.Message_Wantlist_Entry{
			Block:    proto.String(e.Cid.KeyString()),
			Priority: proto.Int32(int32(e.Priority)),
			Cancel:   proto.Bool(e.Cancel),
		})
	}
	for _, b := range m.Blocks() {
		blk := &pb.Message_Block{
			Data:   b.RawData(),
			Prefix: b.Cid().Prefix().Bytes(),
		}
		pbm.Payload = append(pbm.Payload, blk)
	}
	return pbm
}

开发者ID:VictorBjelkholm，项目名称:go-ipfs，代码行数:19，代码来源:message.go

示例5: newMessageFromProto

func newMessageFromProto(pbm pb.Message) BitSwapMessage {
	m := newMsg(pbm.GetWantlist().GetFull())
	for _, e := range pbm.GetWantlist().GetEntries() {
		m.addEntry(key.Key(e.GetBlock()), int(e.GetPriority()), e.GetCancel())
	}
	for _, d := range pbm.GetBlocks() {
		b := blocks.NewBlock(d)
		m.AddBlock(b)
	}
	return m
}

开发者ID:ccsblueboy，项目名称:go-ipfs，代码行数:11，代码来源:message.go

示例6: newMessageFromProto

func newMessageFromProto(pbm pb.Message) (BitSwapMessage, error) {
	m := newMsg(pbm.GetWantlist().GetFull())
	for _, e := range pbm.GetWantlist().GetEntries() {
		c, err := cid.Cast([]byte(e.GetBlock()))
		if err != nil {
			return nil, fmt.Errorf("incorrectly formatted cid in wantlist: %s", err)
		}
		m.addEntry(c, int(e.GetPriority()), e.GetCancel())
	}

	// deprecated
	for _, d := range pbm.GetBlocks() {
		// CIDv0, sha256, protobuf only
		b := blocks.NewBlock(d)
		m.AddBlock(b)
	}
	//

	for _, b := range pbm.GetPayload() {
		pref, err := cid.PrefixFromBytes(b.GetPrefix())
		if err != nil {
			return nil, err
		}

		c, err := pref.Sum(b.GetData())
		if err != nil {
			return nil, err
		}

		blk, err := blocks.NewBlockWithCid(b.GetData(), c)
		if err != nil {
			return nil, err
		}

		m.AddBlock(blk)
	}

	return m, nil
}

开发者ID:tswindell，项目名称:go-ipfs，代码行数:39，代码来源:message.go

注：本文中的github.com/ipfs/go-ipfs/exchange/bitswap/message/pb.Message类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。