Golang message.BitSwapMessage类代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› Go›Go教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了Golang中github.com/ipfs/go-ipfs/exchange/bitswap/message.BitSwapMessage类的典型用法代码示例。如果您正苦于以下问题：Golang BitSwapMessage类的具体用法？Golang BitSwapMessage怎么用？Golang BitSwapMessage使用的例子？那么恭喜您, 这里精选的类代码示例或许可以为您提供帮助。

在下文中一共展示了BitSwapMessage类的10个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Golang代码示例。

示例1: ReceiveMessage

func (bs *Bitswap) ReceiveMessage(ctx context.Context, p peer.ID, incoming bsmsg.BitSwapMessage) {
	// This call records changes to wantlists, blocks received,
	// and number of bytes transfered.
	bs.engine.MessageReceived(p, incoming)
	// TODO: this is bad, and could be easily abused.
	// Should only track *useful* messages in ledger

	iblocks := incoming.Blocks()

	if len(iblocks) == 0 {
		return
	}

	// quickly send out cancels, reduces chances of duplicate block receives
	var keys []key.Key
	for _, block := range iblocks {
		if _, found := bs.wm.wl.Contains(block.Key()); !found {
			log.Info("received un-asked-for block: %s", block)
			continue
		}
		keys = append(keys, block.Key())
	}
	bs.wm.CancelWants(keys)

	wg := sync.WaitGroup{}
	for _, block := range iblocks {
		wg.Add(1)
		go func(b *blocks.Block) {
			defer wg.Done()
			bs.counterLk.Lock()
			bs.blocksRecvd++
			has, err := bs.blockstore.Has(b.Key())
			if err != nil {
				bs.counterLk.Unlock()
				log.Infof("blockstore.Has error: %s", err)
				return
			}
			if err == nil && has {
				bs.dupBlocksRecvd++
			}
			brecvd := bs.blocksRecvd
			bdup := bs.dupBlocksRecvd
			bs.counterLk.Unlock()
			if has {
				return
			}

			k := b.Key()
			log.Event(ctx, "Bitswap.GetBlockRequest.End", &k)

			log.Debugf("got block %s from %s (%d,%d)", b, p, brecvd, bdup)
			hasBlockCtx, cancel := context.WithTimeout(ctx, hasBlockTimeout)
			if err := bs.HasBlock(hasBlockCtx, b); err != nil {
				log.Warningf("ReceiveMessage HasBlock error: %s", err)
			}
			cancel()
		}(block)
	}
	wg.Wait()
}

开发者ID:agarg21，项目名称:go-ipfs，代码行数:60，代码来源:bitswap.go

示例2: msgToStream

func msgToStream(ctx context.Context, s inet.Stream, msg bsmsg.BitSwapMessage) error {
	deadline := time.Now().Add(sendMessageTimeout)
	if dl, ok := ctx.Deadline(); ok {
		deadline = dl
	}

	if err := s.SetWriteDeadline(deadline); err != nil {
		log.Warningf("error setting deadline: %s", err)
	}

	switch s.Protocol() {
	case ProtocolBitswap:
		if err := msg.ToNetV1(s); err != nil {
			log.Debugf("error: %s", err)
			return err
		}
	case ProtocolBitswapOne, ProtocolBitswapNoVers:
		if err := msg.ToNetV0(s); err != nil {
			log.Debugf("error: %s", err)
			return err
		}
	default:
		return fmt.Errorf("unrecognized protocol on remote: %s", s.Protocol())
	}

	if err := s.SetWriteDeadline(time.Time{}); err != nil {
		log.Warningf("error resetting deadline: %s", err)
	}
	return nil
}

开发者ID:tswindell，项目名称:go-ipfs，代码行数:30，代码来源:ipfs_impl.go

示例3: MessageSent

func (e *Engine) MessageSent(p peer.ID, m bsmsg.BitSwapMessage) error {
	l := e.findOrCreate(p)
	for _, block := range m.Blocks() {
		l.SentBytes(len(block.Data()))
		l.wantList.Remove(block.Key())
		e.peerRequestQueue.Remove(block.Key(), p)
	}

	return nil
}

开发者ID:kpcyrd，项目名称:go-ipfs，代码行数:10，代码来源:engine.go

示例4: MessageReceived

// MessageReceived performs book-keeping. Returns error if passed invalid
// arguments.
func (e *Engine) MessageReceived(p peer.ID, m bsmsg.BitSwapMessage) error {
	e.lock.Lock()
	defer e.lock.Unlock()

	if len(m.Wantlist()) == 0 && len(m.Blocks()) == 0 {
		log.Debugf("received empty message from %s", p)
	}

	newWorkExists := false
	defer func() {
		if newWorkExists {
			e.signalNewWork()
		}
	}()

	l := e.findOrCreate(p)
	if m.Full() {
		l.wantList = wl.New()
	}

	for _, entry := range m.Wantlist() {
		if entry.Cancel {
			log.Debugf("cancel %s", entry.Key)
			l.CancelWant(entry.Key)
			e.peerRequestQueue.Remove(entry.Key, p)
		} else {
			log.Debugf("wants %s - %d", entry.Key, entry.Priority)
			l.Wants(entry.Key, entry.Priority)
			if exists, err := e.bs.Has(entry.Key); err == nil && exists {
				e.peerRequestQueue.Push(entry.Entry, p)
				newWorkExists = true
			}
		}
	}

	for _, block := range m.Blocks() {
		log.Debugf("got block %s %d bytes", block.Key(), len(block.Data))
		l.ReceivedBytes(len(block.Data))
		for _, l := range e.ledgerMap {
			if entry, ok := l.WantListContains(block.Key()); ok {
				e.peerRequestQueue.Push(entry, l.Partner)
				newWorkExists = true
			}
		}
	}
	return nil
}

开发者ID:kalmi，项目名称:go-ipfs，代码行数:49，代码来源:engine.go

示例5: ReceiveMessage

func (bs *Bitswap) ReceiveMessage(ctx context.Context, p peer.ID, incoming bsmsg.BitSwapMessage) {
	// This call records changes to wantlists, blocks received,
	// and number of bytes transfered.
	bs.engine.MessageReceived(p, incoming)
	// TODO: this is bad, and could be easily abused.
	// Should only track *useful* messages in ledger

	iblocks := incoming.Blocks()

	if len(iblocks) == 0 {
		return
	}

	// quickly send out cancels, reduces chances of duplicate block receives
	var keys []key.Key
	for _, block := range iblocks {
		if _, found := bs.wm.wl.Contains(block.Key()); !found {
			log.Info("received un-asked-for block: %s", block)
			continue
		}
		keys = append(keys, block.Key())
	}
	bs.wm.CancelWants(keys)

	wg := sync.WaitGroup{}
	for _, block := range iblocks {
		wg.Add(1)
		go func(b *blocks.Block) {
			defer wg.Done()

			if err := bs.updateReceiveCounters(b.Key()); err != nil {
				return // ignore error, is either logged previously, or ErrAlreadyHaveBlock
			}

			k := b.Key()
			log.Event(ctx, "Bitswap.GetBlockRequest.End", &k)

			log.Debugf("got block %s from %s", b, p)
			hasBlockCtx, cancel := context.WithTimeout(ctx, hasBlockTimeout)
			defer cancel()
			if err := bs.HasBlock(hasBlockCtx, b); err != nil {
				log.Warningf("ReceiveMessage HasBlock error: %s", err)
			}
		}(block)
	}
	wg.Wait()
}

开发者ID:firstteam，项目名称:go-ipfs，代码行数:47，代码来源:bitswap.go

示例6: msgToStream

func msgToStream(s inet.Stream, msg bsmsg.BitSwapMessage) error {
	switch s.Protocol() {
	case ProtocolBitswap:
		if err := msg.ToNetV1(s); err != nil {
			log.Debugf("error: %s", err)
			return err
		}
	case ProtocolBitswapOne, ProtocolBitswapNoVers:
		if err := msg.ToNetV0(s); err != nil {
			log.Debugf("error: %s", err)
			return err
		}
	default:
		return fmt.Errorf("unrecognized protocol on remote: %s", s.Protocol())
	}
	return nil
}

开发者ID:VictorBjelkholm，项目名称:go-ipfs，代码行数:17，代码来源:ipfs_impl.go

示例7: SendMessage

func (bsnet *impl) SendMessage(
	ctx context.Context,
	p peer.ID,
	outgoing bsmsg.BitSwapMessage) error {

	s, err := bsnet.newStreamToPeer(ctx, p)
	if err != nil {
		return err
	}
	defer s.Close()

	if err := outgoing.ToNet(s); err != nil {
		log.Debugf("error: %s", err)
		return err
	}

	return err
}

开发者ID:avbalu，项目名称:go-ipfs，代码行数:18，代码来源:ipfs_impl.go

示例8: MessageReceived

// MessageReceived performs book-keeping. Returns error if passed invalid
// arguments.
func (e *Engine) MessageReceived(p peer.ID, m bsmsg.BitSwapMessage) error {
	if len(m.Wantlist()) == 0 && len(m.Blocks()) == 0 {
		log.Debugf("received empty message from %s", p)
	}

	newWorkExists := false
	defer func() {
		if newWorkExists {
			e.signalNewWork()
		}
	}()

	l := e.findOrCreate(p)
	l.lk.Lock()
	defer l.lk.Unlock()
	if m.Full() {
		l.wantList = wl.New()
	}

	for _, entry := range m.Wantlist() {
		if entry.Cancel {
			log.Debugf("%s cancel %s", p, entry.Cid)
			l.CancelWant(entry.Cid)
			e.peerRequestQueue.Remove(entry.Cid, p)
		} else {
			log.Debugf("wants %s - %d", entry.Cid, entry.Priority)
			l.Wants(entry.Cid, entry.Priority)
			if exists, err := e.bs.Has(entry.Cid); err == nil && exists {
				e.peerRequestQueue.Push(entry.Entry, p)
				newWorkExists = true
			}
		}
	}

	for _, block := range m.Blocks() {
		log.Debugf("got block %s %d bytes", block, len(block.RawData()))
		l.ReceivedBytes(len(block.RawData()))
	}
	return nil
}

开发者ID:qnib，项目名称:go-ipfs，代码行数:42，代码来源:engine.go

示例9: SendRequest

func (bsnet *impl) SendRequest(
	ctx context.Context,
	p peer.ID,
	outgoing bsmsg.BitSwapMessage) (bsmsg.BitSwapMessage, error) {

	s, err := bsnet.newStreamToPeer(ctx, p)
	if err != nil {
		return nil, err
	}
	defer s.Close()

	if err := outgoing.ToNet(s); err != nil {
		log.Debugf("error: %s", err)
		return nil, err
	}

	incoming, err := bsmsg.FromNet(s)
	if err != nil {
		log.Debugf("error: %s", err)
		return incoming, err
	}

	return incoming, nil
}

开发者ID:avbalu，项目名称:go-ipfs，代码行数:24，代码来源:ipfs_impl.go

示例10: SendMsg

func (s *streamMessageSender) SendMsg(msg bsmsg.BitSwapMessage) error {
	return msg.ToNet(s.s)
}

开发者ID:ccsblueboy，项目名称:go-ipfs，代码行数:3，代码来源:ipfs_impl.go

注：本文中的github.com/ipfs/go-ipfs/exchange/bitswap/message.BitSwapMessage类示例整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。