• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ set_solib_svr4_fetch_link_map_offsets函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中set_solib_svr4_fetch_link_map_offsets函数的典型用法代码示例。如果您正苦于以下问题：C++ set_solib_svr4_fetch_link_map_offsets函数的具体用法？C++ set_solib_svr4_fetch_link_map_offsets怎么用？C++ set_solib_svr4_fetch_link_map_offsets使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了set_solib_svr4_fetch_link_map_offsets函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: i386_sol2_init_abi

static void
i386_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Solaris is SVR4-based.  */
  i386_svr4_init_abi (info, gdbarch);

  /* Solaris reserves space for its FPU emulator in `fpregset_t'.
     There is also some space reserved for the registers of a Weitek
     math coprocessor.  */
  tdep->gregset_reg_offset = i386_sol2_gregset_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (i386_sol2_gregset_reg_offset);
  tdep->sizeof_gregset = 19 * 4;
  tdep->sizeof_fpregset = 380;

  /* Signal trampolines are slightly different from SVR4.  */
  tdep->sigtramp_p = i386_sol2_sigtramp_p;
  tdep->sigcontext_addr = i386_sol2_mcontext_addr;
  tdep->sc_reg_offset = tdep->gregset_reg_offset;
  tdep->sc_num_regs = tdep->gregset_num_regs;

  /* Solaris has SVR4-style shared libraries.  */
  set_gdbarch_skip_solib_resolver (gdbarch, sol2_skip_solib_resolver);
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_ilp32_fetch_link_map_offsets);
}
开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:27，代码来源:i386-sol2-tdep.c


示例2: vaxnbsd_elf_init_abi

static void
vaxnbsd_elf_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  /* NetBSD ELF uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_ilp32_fetch_link_map_offsets);
}
开发者ID:Claruarius，项目名称:stblinux-2.6.37，代码行数:7，代码来源:vaxnbsd-tdep.c


示例3: i386fbsd_init_abi

static void
i386fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Obviously FreeBSD is BSD-based.  */
  i386bsd_init_abi (info, gdbarch);

  /* FreeBSD has a different `struct reg', and reserves some space for
     its FPU emulator in `struct fpreg'.  */
  tdep->gregset_reg_offset = i386fbsd_r_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (i386fbsd_r_reg_offset);
  tdep->sizeof_gregset = 18 * 4;
  tdep->sizeof_fpregset = 176;

  /* FreeBSD uses -freg-struct-return by default.  */
  tdep->struct_return = reg_struct_return;

  tdep->sigtramp_p = i386fbsd_sigtramp_p;

  /* FreeBSD uses a different memory layout.  */
  tdep->sigtramp_start = i386fbsd_sigtramp_start_addr;
  tdep->sigtramp_end = i386fbsd_sigtramp_end_addr;

  /* FreeBSD has a more complete `struct sigcontext'.  */
  tdep->sc_reg_offset = i386fbsd_sc_reg_offset;
  tdep->sc_num_regs = ARRAY_SIZE (i386fbsd_sc_reg_offset);

  i386_elf_init_abi (info, gdbarch);

  /* FreeBSD uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_ilp32_fetch_link_map_offsets);
}
开发者ID:mattstock，项目名称:binutils-bexkat1，代码行数:34，代码来源:i386-fbsd-tdep.c


示例4: amd64obsd_init_abi

static void
amd64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  amd64_init_abi (info, gdbarch);

  /* Initialize general-purpose register set details.  */
  tdep->gregset_reg_offset = amd64obsd_r_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (amd64obsd_r_reg_offset);
  tdep->sizeof_gregset = 24 * 8;

  set_gdbarch_regset_from_core_section (gdbarch,
					amd64obsd_regset_from_core_section);

  tdep->jb_pc_offset = 7 * 8;

  tdep->sigtramp_p = amd64obsd_sigtramp_p;
  tdep->sigcontext_addr = amd64obsd_sigcontext_addr;
  tdep->sc_reg_offset = amd64obsd_sc_reg_offset;
  tdep->sc_num_regs = ARRAY_SIZE (amd64obsd_sc_reg_offset);

  /* OpenBSD uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);
}
开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:26，代码来源:amd64obsd-tdep.c


示例5: nios2_linux_init_abi

static void
nios2_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  linux_init_abi (info, gdbarch);

  /* Shared library handling.  */
  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
  set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);

  set_solib_svr4_fetch_link_map_offsets (gdbarch,
					 svr4_ilp32_fetch_link_map_offsets);
  /* Enable TLS support.  */
  set_gdbarch_fetch_tls_load_module_address (gdbarch,
                                             svr4_fetch_objfile_link_map);
  /* Core file support.  */
  set_gdbarch_regset_from_core_section (gdbarch,
                                        nios2_regset_from_core_section);
  /* Linux signal frame unwinders.  */
  tramp_frame_prepend_unwinder (gdbarch,
                                &nios2_linux_rt_sigreturn_tramp_frame);

  tdep->syscall_next_pc = nios2_linux_syscall_next_pc;

  /* Index of target address word in glibc jmp_buf.  */
  tdep->jb_pc = 10;
}
开发者ID:Levi-Armstrong，项目名称:gdb-7.7.1，代码行数:28，代码来源:nios2-linux-tdep.c


示例6: riscv_linux_init_abi

static void
riscv_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  linux_init_abi (info, gdbarch);

  set_gdbarch_software_single_step (gdbarch, riscv_software_single_step);

  set_solib_svr4_fetch_link_map_offsets (gdbarch,
					 (riscv_isa_xlen (gdbarch) == 4
					  ? svr4_ilp32_fetch_link_map_offsets
					  : svr4_lp64_fetch_link_map_offsets));

  /* GNU/Linux uses SVR4-style shared libraries.  */
  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);

  /* GNU/Linux uses the dynamic linker included in the GNU C Library.  */
  set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);

  /* Enable TLS support.  */
  set_gdbarch_fetch_tls_load_module_address (gdbarch,
                                             svr4_fetch_objfile_link_map);

  set_gdbarch_iterate_over_regset_sections
    (gdbarch, riscv_linux_iterate_over_regset_sections);

  tramp_frame_prepend_unwinder (gdbarch, &riscv_linux_sigframe);
}
开发者ID:mattstock，项目名称:binutils-bexkat1，代码行数:27，代码来源:riscv-linux-tdep.c


示例7: amd64_sol2_init_abi

static void
amd64_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  tdep->gregset_reg_offset = amd64_sol2_gregset_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (amd64_sol2_gregset_reg_offset);
  tdep->sizeof_gregset = 28 * 8;

  amd64_init_abi (info, gdbarch,
		  amd64_target_description (X86_XSTATE_SSE_MASK, true));

  tdep->sigtramp_p = amd64_sol2_sigtramp_p;
  tdep->sigcontext_addr = amd64_sol2_mcontext_addr;
  tdep->sc_reg_offset = tdep->gregset_reg_offset;
  tdep->sc_num_regs = tdep->gregset_num_regs;

  /* Solaris uses SVR4-style shared libraries.  */
  set_gdbarch_skip_solib_resolver (gdbarch, sol2_skip_solib_resolver);
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  /* How to print LWP PTIDs from core files.  */
  set_gdbarch_core_pid_to_str (gdbarch, sol2_core_pid_to_str);
}
开发者ID:jon-turney，项目名称:binutils-gdb，代码行数:25，代码来源:amd64-sol2-tdep.c


示例8: amd64nbsd_init_abi

static void
amd64nbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Initialize general-purpose register set details first.  */
  tdep->gregset_reg_offset = amd64nbsd_r_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (amd64nbsd_r_reg_offset);
  tdep->sizeof_gregset = 26 * 8;

  amd64_init_abi (info, gdbarch,
		  amd64_target_description (X86_XSTATE_SSE_MASK, true));

  tdep->jb_pc_offset = 7 * 8;

  /* NetBSD has its own convention for signal trampolines.  */
  tdep->sigtramp_p = amd64nbsd_sigtramp_p;
  tdep->sigcontext_addr = amd64nbsd_mcontext_addr;
  tdep->sc_reg_offset = amd64nbsd_r_reg_offset;
  tdep->sc_num_regs = ARRAY_SIZE (amd64nbsd_r_reg_offset);

  /* NetBSD uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);
}
开发者ID:jon-turney，项目名称:binutils-gdb，代码行数:25，代码来源:amd64-nbsd-tdep.c


示例9: amd64_linux_init_abi

static void
amd64_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  tdep->gregset_reg_offset = amd64_linux_gregset_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (amd64_linux_gregset_reg_offset);
  tdep->sizeof_gregset = 27 * 8;

  amd64_init_abi (info, gdbarch);

  tdep->sigtramp_p = amd64_linux_sigtramp_p;
  tdep->sigcontext_addr = amd64_linux_sigcontext_addr;
  tdep->sc_reg_offset = amd64_linux_sc_reg_offset;
  tdep->sc_num_regs = ARRAY_SIZE (amd64_linux_sc_reg_offset);

  /* GNU/Linux uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  /* Add the %orig_rax register used for syscall restarting.  */
  set_gdbarch_write_pc (gdbarch, amd64_linux_write_pc);
  set_gdbarch_num_regs (gdbarch, AMD64_LINUX_NUM_REGS);
  set_gdbarch_register_name (gdbarch, amd64_linux_register_name);
  set_gdbarch_register_type (gdbarch, amd64_linux_register_type);
  set_gdbarch_register_reggroup_p (gdbarch, amd64_linux_register_reggroup_p);

  /* Enable TLS support.  */
  set_gdbarch_fetch_tls_load_module_address (gdbarch,
                                             svr4_fetch_objfile_link_map);
}
开发者ID:3125788，项目名称:android_toolchain_gdb，代码行数:31，代码来源:amd64-linux-tdep.c


示例10: i386_linux_init_abi

static void
i386_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* GNU/Linux uses ELF.  */
  i386_elf_init_abi (info, gdbarch);

  /* We support the SSE registers on GNU/Linux.  */
  tdep->num_xmm_regs = I386_NUM_XREGS - 1;
  /* set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS); */

  /* Since we have the extra "orig_eax" register on GNU/Linux, we have
     to adjust a few things.  */

  set_gdbarch_write_pc (gdbarch, i386_linux_write_pc);
  set_gdbarch_num_regs (gdbarch, I386_SSE_NUM_REGS + 1);
  set_gdbarch_register_name (gdbarch, i386_linux_register_name);
  set_gdbarch_register_bytes (gdbarch, I386_SSE_SIZEOF_REGS + 4);

  tdep->jb_pc_offset = 20;	/* From <bits/setjmp.h>.  */

  tdep->sigcontext_addr = i386_linux_sigcontext_addr;
  tdep->sc_pc_offset = 14 * 4;	/* From <asm/sigcontext.h>.  */
  tdep->sc_sp_offset = 7 * 4;

  /* When the i386 Linux kernel calls a signal handler, the return
     address points to a bit of code on the stack.  This function is
     used to identify this bit of code as a signal trampoline in order
     to support backtracing through calls to signal handlers.  */
  set_gdbarch_pc_in_sigtramp (gdbarch, i386_linux_pc_in_sigtramp);

  set_solib_svr4_fetch_link_map_offsets (gdbarch,
				       i386_linux_svr4_fetch_link_map_offsets);
}
开发者ID:jichu4n，项目名称:prc-tools-remix，代码行数:35，代码来源:i386-linux-tdep.c


示例11: amd64obsd_init_abi

static void
amd64obsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  amd64_init_abi (info, gdbarch);

  /* Initialize general-purpose register set details.  */
  tdep->gregset_reg_offset = amd64obsd_r_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (amd64obsd_r_reg_offset);
  tdep->sizeof_gregset = 24 * 8;

  set_gdbarch_regset_from_core_section (gdbarch,
					amd64obsd_regset_from_core_section);

  tdep->jb_pc_offset = 7 * 8;

  tdep->sigtramp_p = amd64obsd_sigtramp_p;
  tdep->sigcontext_addr = amd64obsd_sigcontext_addr;
  tdep->sc_reg_offset = amd64obsd_sc_reg_offset;
  tdep->sc_num_regs = ARRAY_SIZE (amd64obsd_sc_reg_offset);

  /* OpenBSD provides a user-level threads implementation.  */
  bsd_uthread_set_supply_uthread (gdbarch, amd64obsd_supply_uthread);
  bsd_uthread_set_collect_uthread (gdbarch, amd64obsd_collect_uthread);

  /* OpenBSD uses SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  /* Unwind kernel trap frames correctly.  */
  frame_unwind_prepend_unwinder (gdbarch, &amd64obsd_trapframe_unwind);
}
开发者ID:sergiodj，项目名称:gdb-sergio，代码行数:33，代码来源:amd64obsd-tdep.c


示例12: mips_fbsd_init_abi

static void
mips_fbsd_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  enum mips_abi abi = mips_abi (gdbarch);

  /* Generic FreeBSD support.  */
  fbsd_init_abi (info, gdbarch);

  set_gdbarch_software_single_step (gdbarch, mips_software_single_step);

  switch (abi)
    {
      case MIPS_ABI_O32:
	tramp_frame_prepend_unwinder (gdbarch, &mips_fbsd_sigframe);
	break;
      case MIPS_ABI_N32:
	tramp_frame_prepend_unwinder (gdbarch, &mipsn32_fbsd_sigframe);
	break;
      case MIPS_ABI_N64:
	tramp_frame_prepend_unwinder (gdbarch, &mips64_fbsd_sigframe);
	break;
    }

  set_gdbarch_iterate_over_regset_sections
    (gdbarch, mips_fbsd_iterate_over_regset_sections);

  /* FreeBSD/mips has SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, (gdbarch_ptr_bit (gdbarch) == 32 ?
	       mips_fbsd_ilp32_fetch_link_map_offsets :
	       mips_fbsd_lp64_fetch_link_map_offsets));
}
开发者ID:bminor，项目名称:binutils-gdb，代码行数:32，代码来源:mips-fbsd-tdep.c


示例13: i386_sol2_init_abi

static void
i386_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Solaris is SVR4-based.  */
  i386_svr4_init_abi (info, gdbarch);

  /* The SunPRO compiler puts out 0 instead of the address in N_SO symbols,
     and for SunPRO 3.0, N_FUN symbols too.  */
  set_gdbarch_sofun_address_maybe_missing (gdbarch, 1);

  /* Handle SunPRO encoding of static symbols.  */
  set_gdbarch_static_transform_name (gdbarch, i386_sol2_static_transform_name);

  /* Solaris reserves space for its FPU emulator in `fpregset_t'.
     There is also some space reserved for the registers of a Weitek
     math coprocessor.  */
  tdep->gregset_reg_offset = i386_sol2_gregset_reg_offset;
  tdep->gregset_num_regs = ARRAY_SIZE (i386_sol2_gregset_reg_offset);
  tdep->sizeof_gregset = 19 * 4;
  tdep->sizeof_fpregset = 380;

  /* Signal trampolines are slightly different from SVR4.  */
  tdep->sigtramp_p = i386_sol2_sigtramp_p;
  tdep->sigcontext_addr = i386_sol2_mcontext_addr;
  tdep->sc_reg_offset = tdep->gregset_reg_offset;
  tdep->sc_num_regs = tdep->gregset_num_regs;

  /* Solaris has SVR4-style shared libraries.  */
  set_gdbarch_skip_solib_resolver (gdbarch, sol2_skip_solib_resolver);
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_ilp32_fetch_link_map_offsets);
}
开发者ID:sergiodj，项目名称:gdb-sergio，代码行数:34，代码来源:i386-sol2-tdep.c


示例14: alpha_linux_init_abi

static void
alpha_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep;

  linux_init_abi (info, gdbarch);

  /* Hook into the DWARF CFI frame unwinder.  */
  alpha_dwarf2_init_abi (info, gdbarch);

  /* Hook into the MDEBUG frame unwinder.  */
  alpha_mdebug_init_abi (info, gdbarch);

  tdep = gdbarch_tdep (gdbarch);
  tdep->dynamic_sigtramp_offset = alpha_linux_sigtramp_offset;
  tdep->sigcontext_addr = alpha_linux_sigcontext_addr;
  tdep->pc_in_sigtramp = alpha_linux_pc_in_sigtramp;
  tdep->jb_pc = 2;
  tdep->jb_elt_size = 8;

  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);

  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  /* Enable TLS support.  */
  set_gdbarch_fetch_tls_load_module_address (gdbarch,
                                             svr4_fetch_objfile_link_map);

  set_gdbarch_regset_from_core_section
    (gdbarch, alpha_linux_regset_from_core_section);
}
开发者ID:Claruarius，项目名称:stblinux-2.6.37，代码行数:32，代码来源:alpha-linux-tdep.c


示例15: sparc64_sol2_init_abi

void
sparc64_sol2_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  frame_unwind_append_unwinder (gdbarch, &sparc64_sol2_sigtramp_frame_unwind);

  sparc64_init_abi (info, gdbarch);

  /* The Sun compilers (Sun ONE Studio, Forte Developer, Sun WorkShop, SunPRO)
     compiler puts out 0 instead of the address in N_SO stabs.  Starting with
     SunPRO 3.0, the compiler does this for N_FUN stabs too.  */
  set_gdbarch_sofun_address_maybe_missing (gdbarch, 1);

  /* The Sun compilers also do "globalization"; see the comment in
     sparc_sol2_static_transform_name for more information.  */
  set_gdbarch_static_transform_name
    (gdbarch, sparc_sol2_static_transform_name);

  /* Solaris has SVR4-style shared libraries...  */
  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
  set_gdbarch_skip_solib_resolver (gdbarch, sol2_skip_solib_resolver);
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  /* ...which means that we need some special handling when doing
     prologue analysis.  */
  tdep->plt_entry_size = 16;

  /* Solaris has kernel-assisted single-stepping support.  */
  set_gdbarch_software_single_step (gdbarch, NULL);

  /* How to print LWP PTIDs from core files.  */
  set_gdbarch_core_pid_to_str (gdbarch, sol2_core_pid_to_str);
}
开发者ID:ArmstrongJ，项目名称:insight-debugger，代码行数:35，代码来源:sparc64-sol2-tdep.c


示例16: alphaobsd_init_abi

static void
alphaobsd_init_abi(struct gdbarch_info info, struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Hook into the DWARF CFI frame unwinder.  */
  alpha_dwarf2_init_abi (info, gdbarch);

  /* Hook into the MDEBUG frame unwinder.  */
  alpha_mdebug_init_abi (info, gdbarch);

  /* OpenBSD/alpha 3.0 and earlier does not provide single step
     support via ptrace(2); use software single-stepping for now.  */
  set_gdbarch_software_single_step (gdbarch, alpha_software_single_step);

  /* OpenBSD/alpha has SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);
  set_gdbarch_skip_solib_resolver (gdbarch, obsd_skip_solib_resolver);

  tdep->dynamic_sigtramp_offset = alphaobsd_sigtramp_offset;
  tdep->pc_in_sigtramp = alphaobsd_pc_in_sigtramp;
  tdep->sigcontext_addr = alphaobsd_sigcontext_addr;

  tdep->jb_pc = 2;
  tdep->jb_elt_size = 8;

  set_gdbarch_regset_from_core_section
    (gdbarch, alphanbsd_regset_from_core_section);
}
开发者ID:sergiodj，项目名称:gdb-sergio，代码行数:30，代码来源:alphaobsd-tdep.c


示例17: alphanbsd_init_abi

static void
alphanbsd_init_abi (struct gdbarch_info info,
                    struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Hook into the DWARF CFI frame unwinder.  */
  alpha_dwarf2_init_abi (info, gdbarch);

  /* Hook into the MDEBUG frame unwinder.  */
  alpha_mdebug_init_abi (info, gdbarch);

  /* NetBSD/alpha does not provide single step support via ptrace(2); we
     must use software single-stepping.  */
  set_gdbarch_software_single_step (gdbarch, alpha_software_single_step);
  /* NetBSD/alpha has SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

#ifdef notyet
  tdep->dynamic_sigtramp_offset = alphanbsd_sigtramp_offset;
  tdep->pc_in_sigtramp = alphanbsd_pc_in_sigtramp;
  tdep->sigcontext_addr = alphanbsd_sigcontext_addr;
#endif

  tdep->jb_pc = 2;
  tdep->jb_elt_size = 8;

  tramp_frame_prepend_unwinder (gdbarch, &alphanbsd_sigtramp_sc1);
  tramp_frame_prepend_unwinder (gdbarch, &alphanbsd_sigtramp_si2);
  tramp_frame_prepend_unwinder (gdbarch, &alphanbsd_sigtramp_si4);

  set_gdbarch_iterate_over_regset_sections
    (gdbarch, alphanbsd_iterate_over_regset_sections);
}
开发者ID:ajinkya93，项目名称:netbsd-src，代码行数:35，代码来源:alphanbsd-tdep.c


示例18: sh_linux_init_abi

static void
sh_linux_init_abi (struct gdbarch_info info, struct gdbarch *gdbarch)
{
  linux_init_abi (info, gdbarch);

  /* GNU/Linux uses SVR4-style shared libraries.  */
  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_ilp32_fetch_link_map_offsets);
  set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);

  set_gdbarch_fetch_tls_load_module_address (gdbarch,
                                             svr4_fetch_objfile_link_map);

  /* Core files and signal handler frame unwinding are supported for
     32-bit SH only, at present.  */
  if (info.bfd_arch_info->mach != bfd_mach_sh5)
    {
      struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

      /* Remember regset characteristics.  The sizes should match
	 elf_gregset_t and elf_fpregset_t from Linux.  */
      tdep->core_gregmap = (struct sh_corefile_regmap *)gregs_table;
      tdep->sizeof_gregset = 92;
      tdep->core_fpregmap = (struct sh_corefile_regmap *)fpregs_table;
      tdep->sizeof_fpregset = 136;

      tramp_frame_prepend_unwinder (gdbarch, &sh_linux_sigreturn_tramp_frame);
      tramp_frame_prepend_unwinder (gdbarch, &sh_linux_rt_sigreturn_tramp_frame);
    }
}
开发者ID:Cookfeces，项目名称:binutils-gdb，代码行数:31，代码来源:sh-linux-tdep.c


示例19: alphafbsd_init_abi

static void
alphafbsd_init_abi (struct gdbarch_info info,
                    struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  /* Hook into the DWARF CFI frame unwinder.  */
  alpha_dwarf2_init_abi (info, gdbarch);

  /* Hook into the MDEBUG frame unwinder.  */
  alpha_mdebug_init_abi (info, gdbarch);

  /* FreeBSD/alpha has SVR4-style shared libraries.  */
  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, svr4_lp64_fetch_link_map_offsets);

  tdep->dynamic_sigtramp_offset = alphafbsd_sigtramp_offset;
  tdep->sigcontext_addr = alphafbsd_sigcontext_addr;
  tdep->pc_in_sigtramp = alphafbsd_pc_in_sigtramp;
  tdep->return_in_memory = alphafbsd_return_in_memory;
  tdep->sc_pc_offset = 288;
  tdep->sc_regs_offset = 24;
  tdep->sc_fpregs_offset = 320;

  tdep->jb_pc = 2;
  tdep->jb_elt_size = 8;
}
开发者ID:ArmstrongJ，项目名称:insight-debugger，代码行数:27，代码来源:alphafbsd-tdep.c


示例20: arm_linux_init_abi

static void
arm_linux_init_abi (struct gdbarch_info info,
		    struct gdbarch *gdbarch)
{
  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);

  tdep->lowest_pc = 0x8000;
  if (info.byte_order == BFD_ENDIAN_BIG)
    tdep->arm_breakpoint = arm_linux_arm_be_breakpoint;
  else
    tdep->arm_breakpoint = arm_linux_arm_le_breakpoint;
  tdep->arm_breakpoint_size = sizeof (arm_linux_arm_le_breakpoint);

  tdep->fp_model = ARM_FLOAT_FPA;

  tdep->jb_pc = ARM_LINUX_JB_PC;
  tdep->jb_elt_size = ARM_LINUX_JB_ELEMENT_SIZE;

  set_solib_svr4_fetch_link_map_offsets
    (gdbarch, arm_linux_svr4_fetch_link_map_offsets);

  set_gdbarch_deprecated_call_dummy_words (gdbarch, arm_linux_call_dummy_words);
  set_gdbarch_deprecated_sizeof_call_dummy_words (gdbarch, sizeof (arm_linux_call_dummy_words));

  /* The following two overrides shouldn't be needed.  */
  set_gdbarch_deprecated_extract_return_value (gdbarch, arm_linux_extract_return_value);
  set_gdbarch_deprecated_push_arguments (gdbarch, arm_linux_push_arguments);

  /* Shared library handling.  */
  set_gdbarch_in_solib_call_trampoline (gdbarch, in_plt_section);
  set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
  set_gdbarch_skip_solib_resolver (gdbarch, glibc_skip_solib_resolver);
}
开发者ID:unofficial-opensource-apple，项目名称:gdbforcw，代码行数:33，代码来源:arm-linux-tdep.c



注：本文中的set_solib_svr4_fetch_link_map_offsets函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ set_speed函数代码示例发布时间：2022-05-30
下一篇：
C++ set_socket_active_status函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap