C++ set_socket_active_status函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中set_socket_active_status函数的典型用法代码示例。如果您正苦于以下问题：C++ set_socket_active_status函数的具体用法？C++ set_socket_active_status怎么用？C++ set_socket_active_status使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了set_socket_active_status函数的11个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: closesocket

long
closesocket(long sd)
{
	long ret;
	unsigned char *ptr, *args;
	
	ret = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in HCI packet structure
	args = UINT32_TO_STREAM(args, sd);
	
	// Initiate a HCI command
	hci_command_send(HCI_CMND_CLOSE_SOCKET,
									 ptr, SOCKET_CLOSE_PARAMS_LEN);
	
	// Since we are in blocking state - wait for event complete
	SimpleLinkWaitEvent(HCI_CMND_CLOSE_SOCKET, &ret);
	errno = ret;
	
	// since 'close' call may result in either OK (and then it closed) or error 
	// mark this socket as invalid 
	set_socket_active_status(sd, SOCKET_STATUS_INACTIVE);
	
	return(ret);
}

开发者ID:Blue-Design，项目名称:ArduinoCC3000，代码行数:27，代码来源:socket.c

示例2: socket

int
socket(long domain, long type, long protocol)
{
	long ret;
	unsigned char *ptr, *args;
	
	ret = EFAIL;
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in HCI packet structure
	args = UINT32_TO_STREAM(args, domain);
	args = UINT32_TO_STREAM(args, type);
	args = UINT32_TO_STREAM(args, protocol);
	
	// Initiate a HCI command
	hci_command_send(HCI_CMND_SOCKET, ptr, SOCKET_OPEN_PARAMS_LEN);
	
	// Since we are in blocking state - wait for event complete
	SimpleLinkWaitEvent(HCI_CMND_SOCKET, &ret);
	
	// Process the event 
	errno = ret;
	
	set_socket_active_status(ret, SOCKET_STATUS_ACTIVE);
	
	return(ret);
}

开发者ID:Blue-Design，项目名称:ArduinoCC3000，代码行数:28，代码来源:socket.c

示例3: accept

long
accept(long sd, sockaddr *addr, socklen_t *addrlen)
{
    cc3000_check_irq_pin();
	long ret;
	unsigned char *ptr, *args;
	tBsdReturnParams tAcceptReturnArguments;
	
	ret = EFAIL;
	tAcceptReturnArguments.iStatus = EFAIL; // in case of timeout
	ptr = tSLInformation.pucTxCommandBuffer;
	args = (ptr + HEADERS_SIZE_CMD);
	
	// Fill in temporary command buffer
	args = UINT32_TO_STREAM(args, sd);
	
	// Initiate a HCI command
	hci_command_send(HCI_CMND_ACCEPT,
									 ptr, SOCKET_ACCEPT_PARAMS_LEN);
	
	// Since we are in blocking state - wait for event complete
	SimpleLinkWaitEvent(HCI_CMND_ACCEPT, &tAcceptReturnArguments);
	
	// if we had a problem while waiting, just exit...
	if (jspIsInterrupted()) return -1;
	
	// need specify return parameters!!!
	memcpy(addr, &tAcceptReturnArguments.tSocketAddress, ASIC_ADDR_LEN);
	*addrlen = ASIC_ADDR_LEN;
	errno = tAcceptReturnArguments.iStatus; 
	ret = errno;
	
	// if succeeded, iStatus = new socket descriptor. otherwise - error number 
	if(M_IS_VALID_SD(ret))
	{
		set_socket_active_status(ret, SOCKET_STATUS_ACTIVE);
	}
	else
	{
		set_socket_active_status(sd, SOCKET_STATUS_INACTIVE);
	}
	
	return(ret);
}

开发者ID:0x00f，项目名称:Espruino，代码行数:44，代码来源:socket.c

示例4: update_socket_active_status

//*****************************************************************************
//
//!  update_socket_active_status
//!
//!  @param  resp_params  Socket IS
//!  @return     Current status of the socket.
//!
//!  @brief  Retrieve socket status
//
//*****************************************************************************
void update_socket_active_status(CHAR *resp_params) {
  INT32 status, sd;

  STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_SOCKET_OFFSET, sd);
  STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_STATUS_OFFSET, status);

  if (ERROR_SOCKET_INACTIVE == status) {
    set_socket_active_status(sd, SOCKET_STATUS_INACTIVE);
  }
}

开发者ID:Chen0Yang，项目名称:fossa，代码行数:20，代码来源:evnt_handler.cpp

示例5: STREAM_TO_UINT32

void cc3000_event::update_socket_active_status(uint8_t *resp_params) {
    int32_t status, sd;

    STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_SOCKET_OFFSET,sd);
    STREAM_TO_UINT32(resp_params, BSD_RSP_PARAMS_STATUS_OFFSET,status);

    if (ERROR_SOCKET_INACTIVE == status) {
        set_socket_active_status(sd, SOCKET_STATUS_INACTIVE);
    }
}

开发者ID:alin96，项目名称:Wireless-Communications-Relay，代码行数:10，代码来源:cc3000_event.cpp

示例6: hci_event_handler


//.........这里部分代码省略.........
						STREAM_TO_UINT32((char *)pucReceivedParams
						      ,GET_HOST_BY_NAME_RETVAL_OFFSET,*(unsigned long *)pRetParams);
						pRetParams = ((char *)pRetParams) + 4;
						STREAM_TO_UINT32((char *)pucReceivedParams
									,GET_HOST_BY_NAME_ADDR_OFFSET,*(unsigned long *)pRetParams);					
						break;
						
					case HCI_EVNT_ACCEPT:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,ACCEPT_SD_OFFSET
															 ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams
										,ACCEPT_RETURN_STATUS_OFFSET,*(unsigned long *)pRetParams);
              pRetParams = ((char *)pRetParams) + 4; 
							
							//This argument returns in network order
							memcpy((unsigned char *)pRetParams, 
								  pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));	
							break;
						}
						
					case HCI_EVNT_RECV:
					case HCI_EVNT_RECVFROM:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(unsigned long *)pRetParams);
							
							if(((tBsdReadReturnParams *)pRetParams)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
							{
								set_socket_active_status(((tBsdReadReturnParams *)pRetParams)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
							}
							break;
						}
                                                
                                        case HCI_EVNT_SEND:
					case HCI_EVNT_SENDTO:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							
							break;
						}
						
					case HCI_EVNT_SELECT:
						{ 
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_STATUS_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_READFD_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_EXFD_OFFSET,*(unsigned long *)pRetParams);			
							break;
						}
						
					case HCI_CMND_GETSOCKOPT:
						
						STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)pRetParams)->iStatus);
						//This argument returns in network order
						memcpy((unsigned char *)pRetParams, pucReceivedParams, 4);

开发者ID:GavinAndrews，项目名称:Espruino，代码行数:67，代码来源:evnt_handler.c

示例7: while


//.........这里部分代码省略.........
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         ACCEPT_RETURN_STATUS_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;

                        /* This argument returns in network order */

                        memcpy((uint8_t *)pRetParams,
                               pucReceivedParams + ACCEPT_ADDRESS__OFFSET,
                               sizeof(struct sockaddr));
                      }
                      break;

                    case HCI_EVNT_RECV:
                    case HCI_EVNT_RECVFROM:
                      {
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SL_RECEIVE_SD_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SL_RECEIVE_NUM_BYTES_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SL_RECEIVE__FLAGS__OFFSET,
                                         *(unsigned long *)pRetParams);

                        if (((tBsdReadReturnParams *)pRetParams)->iNumberOfBytes ==
                            ERROR_SOCKET_INACTIVE)
                          {
                            set_socket_active_status
                              (((tBsdReadReturnParams *)pRetParams)->iSocketDescriptor,
                              SOCKET_STATUS_INACTIVE);
                          }
                      }
                      break;

                    case HCI_EVNT_SEND:
                    case HCI_EVNT_SENDTO:
                      {
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SL_RECEIVE_SD_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SL_RECEIVE_NUM_BYTES_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                      }
                    break;

                    case HCI_EVNT_SELECT:
                      {
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SELECT_STATUS_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SELECT_READFD_OFFSET,
                                         *(unsigned long *)pRetParams);
                        pRetParams = ((char *)pRetParams) + 4;
                        STREAM_TO_UINT32((char *)pucReceivedParams,
                                         SELECT_WRITEFD_OFFSET,

开发者ID:LindaLovelace，项目名称:nuttx-stm32f4disc-bb，代码行数:67，代码来源:evnt_handler.c

示例8: hci_event_handler


//.........这里部分代码省略.........
						UINT32_TO_STREAM((unsigned char *)pRetParams, retValue32);				
						break;
						
					case HCI_EVNT_BSD_GETHOSTBYNAME:
						
						STREAM_TO_UINT32((char *)pucReceivedParams,GET_HOST_BY_NAME_RETVAL_OFFSET,*(unsigned long *)pRetParams);
						pRetParams = ((char *)pRetParams) + 4;
						STREAM_TO_UINT32((char *)pucReceivedParams,GET_HOST_BY_NAME_ADDR_OFFSET,*(unsigned long *)pRetParams);
						break;
						
					case HCI_EVNT_ACCEPT:
						{
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,ACCEPT_SD_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,ACCEPT_RETURN_STATUS_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;

                                                  //This argument returns in network order
                                                  memcpy((unsigned char *)pRetParams, pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));
                                                  break;
						}
						
					case HCI_EVNT_RECV:
					case HCI_EVNT_RECVFROM:
						{
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(unsigned long *)pRetParams);

                                                  if(((tBsdReadReturnParams *)pRetParams)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
                                                  {
                                                          set_socket_active_status(((tBsdReadReturnParams *)pRetParams)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
                                                  }
                                                  break;
						}
                                                
                                        case HCI_EVNT_SEND:
					case HCI_EVNT_SENDTO:
						{
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;

                                                  break;
						}
						
					case HCI_EVNT_SELECT:
						{ 
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_STATUS_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_READFD_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(unsigned long *)pRetParams);
                                                  pRetParams = ((char *)pRetParams) + 4;
                                                  STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_EXFD_OFFSET,*(unsigned long *)pRetParams);
                                                  break;
						}
						
					case HCI_CMND_GETSOCKOPT:
						
						STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)pRetParams)->iStatus);
						//This argument returns in network order
						memcpy((unsigned char *)pRetParams, pucReceivedParams, 4);

开发者ID:Spark-Works，项目名称:core-common-lib，代码行数:67，代码来源:evnt_handler.c

示例9: while


//.........这里部分代码省略.........
              break;

            case HCI_EVNT_ACCEPT: {
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, ACCEPT_SD_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams,
                               ACCEPT_RETURN_STATUS_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;

              // This argument returns in network order
              memcpy((UINT8 *) pRetParams,
                     pucReceivedParams + ACCEPT_ADDRESS__OFFSET,
                     sizeof(sockaddr));
              break;
            }

            case HCI_EVNT_RECV:
            case HCI_EVNT_RECVFROM: {
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, SL_RECEIVE_SD_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams,
                               SL_RECEIVE_NUM_BYTES_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams,
                               SL_RECEIVE__FLAGS__OFFSET,
                               *(UINT32 *) pRetParams);

              if (((tBsdReadReturnParams *) pRetParams)->iNumberOfBytes ==
                  ERROR_SOCKET_INACTIVE) {
                set_socket_active_status(
                    ((tBsdReadReturnParams *) pRetParams)->iSocketDescriptor,
                    SOCKET_STATUS_INACTIVE);
              }
              break;
            }

            case HCI_EVNT_SEND:
            case HCI_EVNT_SENDTO: {
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, SL_RECEIVE_SD_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams,
                               SL_RECEIVE_NUM_BYTES_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;

              break;
            }

            case HCI_EVNT_SELECT: {
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, SELECT_STATUS_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, SELECT_READFD_OFFSET,
                               *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams,
                               SELECT_WRITEFD_OFFSET, *(UINT32 *) pRetParams);
              pRetParams = ((CHAR *) pRetParams) + 4;
              STREAM_TO_UINT32((CHAR *) pucReceivedParams, SELECT_EXFD_OFFSET,
                               *(UINT32 *) pRetParams);
              break;

开发者ID:Chen0Yang，项目名称:fossa，代码行数:67，代码来源:evnt_handler.cpp

示例10: hci_event_handler


//.........这里部分代码省略.........
						STREAM_TO_UINT32((char *)pucReceivedParams
						      ,GET_HOST_BY_NAME_RETVAL_OFFSET,*(unsigned long *)pRetParams);
						pRetParams = ((char *)pRetParams) + 4;
						STREAM_TO_UINT32((char *)pucReceivedParams
									,GET_HOST_BY_NAME_ADDR_OFFSET,*(unsigned long *)pRetParams);					
						break;
						
					case HCI_EVNT_ACCEPT:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,ACCEPT_SD_OFFSET
															 ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams
										,ACCEPT_RETURN_STATUS_OFFSET,*(unsigned long *)pRetParams);
              pRetParams = ((char *)pRetParams) + 4; 
							
							//This argument returns in network order
							memcpy((unsigned char *)pRetParams, 
								  pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));	
							break;
						}
						
					case HCI_EVNT_RECV:
					case HCI_EVNT_RECVFROM:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(unsigned long *)pRetParams);
							
							if(((tBsdReadReturnParams *)pRetParams)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
							{
								set_socket_active_status(((tBsdReadReturnParams *)pRetParams)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
							}
							break;
						}
                                                
                                        case HCI_EVNT_SEND:
					case HCI_EVNT_SENDTO:
						{
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							
							break;
						}
						
					case HCI_EVNT_SELECT:
						{ 
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_STATUS_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_READFD_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(unsigned long *)pRetParams);
							pRetParams = ((char *)pRetParams) + 4;
							STREAM_TO_UINT32((char *)pucReceivedParams,SELECT_EXFD_OFFSET,*(unsigned long *)pRetParams);			
							break;
						}
						
					case HCI_CMND_GETSOCKOPT:
						
						STREAM_TO_UINT8(pucReceivedData, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)pRetParams)->iStatus);
						//This argument returns in network order
						memcpy((unsigned char *)pRetParams, pucReceivedParams, 4);

开发者ID:abegong，项目名称:firmware，代码行数:67，代码来源:evnt_handler.c

示例11: while


//.........这里部分代码省略.........
                        UINT32_TO_STREAM((uint8_t *)ret_param, return_value);
                        break;

                    case HCI_EVNT_BSD_GETHOSTBYNAME:

                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_HOST_BY_NAME_RETVAL_OFFSET,*(uint32_t *)ret_param);
                        ret_param = ((uint8_t *)ret_param) + 4;
                        STREAM_TO_UINT32((uint8_t *)pucReceivedParams,GET_HOST_BY_NAME_ADDR_OFFSET,*(uint32_t *)ret_param);
                        break;

                    case HCI_EVNT_ACCEPT:
                        {
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,ACCEPT_SD_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,ACCEPT_RETURN_STATUS_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;

                            //This argument returns in network order
                            memcpy((uint8_t *)ret_param, pucReceivedParams + ACCEPT_ADDRESS__OFFSET, sizeof(sockaddr));
                            break;
                        }

                    case HCI_EVNT_RECV:
                    case HCI_EVNT_RECVFROM:
                        {
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE__FLAGS__OFFSET,*(uint32_t *)ret_param);

                            if(((tBsdReadReturnParams *)ret_param)->iNumberOfBytes == ERROR_SOCKET_INACTIVE)
                            {
                                set_socket_active_status(((tBsdReadReturnParams *)ret_param)->iSocketDescriptor,SOCKET_STATUS_INACTIVE);
                            }
                            break;
                        }

                    case HCI_EVNT_SEND:
                    case HCI_EVNT_SENDTO:
                        {
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_SD_OFFSET ,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SL_RECEIVE_NUM_BYTES_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;

                            break;
                        }

                    case HCI_EVNT_SELECT:
                        {
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_STATUS_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_READFD_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_WRITEFD_OFFSET,*(uint32_t *)ret_param);
                            ret_param = ((uint8_t *)ret_param) + 4;
                            STREAM_TO_UINT32((uint8_t *)pucReceivedParams,SELECT_EXFD_OFFSET,*(uint32_t *)ret_param);
                            break;
                        }

                    case HCI_CMND_GETSOCKOPT:

                        STREAM_TO_UINT8(received_data, HCI_EVENT_STATUS_OFFSET,((tBsdGetSockOptReturnParams *)ret_param)->iStatus);
                        //This argument returns in network order
                        memcpy((uint8_t *)ret_param, pucReceivedParams, 4);

开发者ID:alin96，项目名称:Wireless-Communications-Relay，代码行数:67，代码来源:cc3000_event.cpp

注：本文中的set_socket_active_status函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ set_solib_svr4_fetch_link_map_offsets函数代码示例发布时间：2022-05-30

C++ set_smp_cross_call函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19144|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9973|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8317|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8686|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8627|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9643|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8611|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7991|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8642|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7527|2022-11-06

客服电话

电子邮件

C++ set_socket_active_status函数代码示例

示例1: closesocket

示例2: socket

示例3: accept

示例4: update_socket_active_status

示例5: STREAM_TO_UINT32

示例6: hci_event_handler

示例7: while

示例8: hci_event_handler

示例9: while

示例10: hci_event_handler

示例11: while

请发表评论

全部评论

上一篇：

下一篇：

jcmsalves/kotlin-playground: Kotlin Andr

bradtraversy/iweather: Ionic 3 mobile we

avehtari/BDA_m_demos: Bayesian Data Anal

断牙刷新位置时间（断牙属性及刷新位置介绍

delphi进度条

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053