C++ set80211priv函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中set80211priv函数的典型用法代码示例。如果您正苦于以下问题：C++ set80211priv函数的具体用法？C++ set80211priv怎么用？C++ set80211priv使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了set80211priv函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: main

int
main(int argc, char *argv[])
{
	const char *ifname = "ath0";
	struct ieee80211req_key setkey;
	struct ieee80211req_del_key delkey;
	int c, keyix;
	int op = IEEE80211_IOCTL_SETKEY;

	progname = argv[0];
	while ((c = getopt(argc, argv, "di:")) != -1)
		switch (c) {
		case 'd':
			op = IEEE80211_IOCTL_DELKEY;
			break;
		case 'i':
			ifname = optarg;
			break;
		default:
			usage();
			/*NOTREACHED*/
		}
	argc -= optind;
	argv += optind;
	if (argc < 1)
		usage();

	keyix = atoi(argv[0]);
	if (!(1 <= keyix && keyix <= 4))
		errx(-1, "%s: invalid key index %s, must be [1..4]",
			progname, argv[0]);
	switch (op) {
	case IEEE80211_IOCTL_DELKEY:
		memset(&delkey, 0, sizeof(delkey));
		delkey.idk_keyix = keyix-1;
		return set80211priv(ifname, op, &delkey, sizeof(delkey), 1);
	case IEEE80211_IOCTL_SETKEY:
		if (argc != 3 && argc != 4)
			usage();
		memset(&setkey, 0, sizeof(setkey));
		setkey.ik_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV;
		setkey.ik_keyix = keyix-1;
		setkey.ik_type = getcipher(argv[1]);
		setkey.ik_keylen = getdata(argv[2], setkey.ik_keydata,
			sizeof(setkey.ik_keydata));
		if (argc == 4)
			(void) getdata(argv[3], setkey.ik_macaddr,
				IEEE80211_ADDR_LEN);
		return set80211priv(ifname, op, &setkey, sizeof(setkey), 1);
	}
	return -1;
}

开发者ID:mickflemm，项目名称:madwifi-old-openhal，代码行数:52，代码来源:athkey.c

示例2: atheros_del_key

static int
atheros_del_key(void *priv, const u8 *addr, int key_idx)
{
	struct atheros_driver_data *drv = priv;
	struct ieee80211req_del_key wk;
	int ret;

	wpa_printf(MSG_DEBUG, "%s: addr=%s key_idx=%d",
		   __func__, ether_sprintf(addr), key_idx);

	memset(&wk, 0, sizeof(wk));
	if (addr != NULL) {
		memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN);
		wk.idk_keyix = (u8) IEEE80211_KEYIX_NONE;
	} else {
		wk.idk_keyix = key_idx;
	}

	ret = set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk));
	if (ret < 0) {
		wpa_printf(MSG_DEBUG, "%s: Failed to delete key (addr %s"
			   " key_idx %d)", __func__, ether_sprintf(addr),
			   key_idx);
	}

	return ret;
}

开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:27，代码来源:driver_atheros.c

示例3: atheros_read_sta_driver_data

static int
atheros_read_sta_driver_data(void *priv, struct hostap_sta_driver_data *data,
			     const u8 *addr)
{
	struct atheros_driver_data *drv = priv;
	struct ieee80211req_sta_stats stats;

	memset(data, 0, sizeof(*data));

	/*
	 * Fetch statistics for station from the system.
	 */
	memset(&stats, 0, sizeof(stats));
	memcpy(stats.is_u.macaddr, addr, IEEE80211_ADDR_LEN);
	if (set80211priv(drv, IEEE80211_IOCTL_STA_STATS,
			 &stats, sizeof(stats))) {
		wpa_printf(MSG_DEBUG, "%s: Failed to fetch STA stats (addr "
			   MACSTR ")", __func__, MAC2STR(addr));
		if (memcmp(addr, drv->acct_mac, ETH_ALEN) == 0) {
			memcpy(data, &drv->acct_data, sizeof(*data));
			return 0;
		}

		printf("Failed to get station stats information element.\n");
		return -1;
	}

	data->rx_packets = stats.is_stats.ns_rx_data;
	data->rx_bytes = stats.is_stats.ns_rx_bytes;
	data->tx_packets = stats.is_stats.ns_tx_data;
	data->tx_bytes = stats.is_stats.ns_tx_bytes;
	return 0;
}

开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:33，代码来源:driver_atheros.c

示例4: ar6000_set_wps_ie

static int
ar6000_set_wps_ie(void *priv, const u8 *iebuf, size_t len, u32 frametype)
{
	struct ar6000_driver_data *drv = priv;
    u8 buf[256];
    struct ieee80211req_getset_appiebuf * ie;

    ((int *)buf)[0] = AR6000_XIOCTL_WMI_SET_APPIE;
    ie = (struct ieee80211req_getset_appiebuf *) &buf[4];
    ie->app_frmtype = frametype;
	ie->app_buflen = len;
	os_memcpy(&(ie->app_buf[0]), ie, len);

	/* append the WPA/RSN IE if it is set already */
	if (((frametype == IEEE80211_APPIE_FRAME_BEACON) ||
	     (frametype == IEEE80211_APPIE_FRAME_PROBE_RESP)) &&
	    (drv->wpa_ie != NULL)) {
		os_memcpy(&(ie->app_buf[len]), wpabuf_head(drv->wpa_ie),
			  wpabuf_len(drv->wpa_ie));
		ie->app_buflen += wpabuf_len(drv->wpa_ie);
	}
    
    return set80211priv(drv, AR6000_IOCTL_EXTENDED, buf,
            sizeof(struct ieee80211req_getset_appiebuf) + len);
}

开发者ID:Jolocotroco，项目名称:android_external_wpa_supplicant_8，代码行数:25，代码来源:driver_ar6000.c

示例5: ar6000_set_sta_authorized

static int
ar6000_set_sta_authorized(void *priv, const u8 *addr, int authorized)
{
	struct ar6000_driver_data *drv = priv;
    struct ieee80211req_mlme mlme;
    int ret;

    wpa_printf(MSG_DEBUG, "%s: addr=%s authorized=%d\n",
        __func__, ether_sprintf(addr), authorized);

    if (authorized)
        mlme.im_op = IEEE80211_MLME_AUTHORIZE;
    else
        mlme.im_op = IEEE80211_MLME_UNAUTHORIZE;
    mlme.im_reason = 0;
    memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
    ret = set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
               sizeof(mlme));
    if (ret < 0) {
        wpa_printf(MSG_DEBUG, "%s: Failed to %sauthorize STA " MACSTR,
               __func__, authorized ? "" : "un", MAC2STR(addr));
    }

    return ret;
}

开发者ID:Jolocotroco，项目名称:android_external_wpa_supplicant_8，代码行数:25，代码来源:driver_ar6000.c

示例6: atheros_set_wps_ie

static int
atheros_set_wps_ie(void *priv, const u8 *ie, size_t len, u32 frametype)
{
	struct atheros_driver_data *drv = priv;
	u8 buf[512];
	struct ieee80211req_getset_appiebuf *beac_ie;

	wpa_printf(MSG_DEBUG, "%s buflen = %lu", __func__,
		   (unsigned long) len);

	beac_ie = (struct ieee80211req_getset_appiebuf *) buf;
	beac_ie->app_frmtype = frametype;
	beac_ie->app_buflen = len;
	os_memcpy(&(beac_ie->app_buf[0]), ie, len);

	/* append the WPA/RSN IE if it is set already */
	if (((frametype == IEEE80211_APPIE_FRAME_BEACON) ||
	     (frametype == IEEE80211_APPIE_FRAME_PROBE_RESP)) &&
	    (drv->wpa_ie != NULL)) {
		os_memcpy(&(beac_ie->app_buf[len]), wpabuf_head(drv->wpa_ie),
			  wpabuf_len(drv->wpa_ie));
		beac_ie->app_buflen += wpabuf_len(drv->wpa_ie);
	}

	return set80211priv(drv, IEEE80211_IOCTL_SET_APPIEBUF, beac_ie,
			    sizeof(struct ieee80211req_getset_appiebuf) +
			    beac_ie->app_buflen);
}

开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:28，代码来源:driver_atheros.c

示例7: wpa_driver_realtek_set_probe_req_ie

static int wpa_driver_realtek_set_probe_req_ie(void *priv, const u8 *ies,
					       size_t ies_len)
{
	struct ieee80211req_getset_appiebuf *probe_req_ie;
	int ret;

	printf("Wpa_supplicant: %s +++\n", __FUNCTION__);

	probe_req_ie = os_malloc(sizeof(*probe_req_ie) + ies_len);
	if (probe_req_ie == NULL)
		return -1;

	probe_req_ie->app_frmtype = IEEE80211_APPIE_FRAME_PROBE_REQ;
	probe_req_ie->app_buflen = ies_len;
	os_memcpy(probe_req_ie->app_buf, ies, ies_len);

#ifdef RTK_INBAND_LE
	probe_req_ie->app_frmtype = htonl(probe_req_ie->app_frmtype);
	probe_req_ie->app_buflen = htonl(probe_req_ie->app_buflen);
#endif

	ret = set80211priv(priv, IEEE80211_IOCTL_SET_APPIEBUF, probe_req_ie,
			   sizeof(struct ieee80211req_getset_appiebuf) +
			   ies_len, 1);

	os_free(probe_req_ie);

	return ret;
}

开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:29，代码来源:driver_realtek.c

示例8: wpa_driver_madwifi_set_key

static int
wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
			   const u8 *addr, int key_idx, int set_tx,
			   const u8 *seq, size_t seq_len,
			   const u8 *key, size_t key_len)
{
	struct madwifi_driver_data *drv = priv;
	struct ieee80211req_key wk;
	u_int8_t cipher;
	int ret;

	if (alg == WPA_ALG_NONE)
		return madwifi_del_key(drv, addr, key_idx);

	wpa_printf(MSG_DEBUG, "%s: alg=%d addr=%s key_idx=%d",
		   __func__, alg, ether_sprintf(addr), key_idx);

	if (alg == WPA_ALG_WEP)
		cipher = IEEE80211_CIPHER_WEP;
	else if (alg == WPA_ALG_TKIP)
		cipher = IEEE80211_CIPHER_TKIP;
	else if (alg == WPA_ALG_CCMP)
		cipher = IEEE80211_CIPHER_AES_CCM;
	else {
		printf("%s: unknown/unsupported algorithm %d\n",
			__func__, alg);
		return -1;
	}

	if (key_len > sizeof(wk.ik_keydata)) {
		printf("%s: key length %lu too big\n", __func__,
		       (unsigned long) key_len);
		return -3;
	}

	memset(&wk, 0, sizeof(wk));
	wk.ik_type = cipher;
	wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT;
	if (addr == NULL || is_broadcast_ether_addr(addr)) {
		memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN);
		wk.ik_keyix = key_idx;
		wk.ik_flags |= IEEE80211_KEY_DEFAULT;
	} else {
		memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
		wk.ik_keyix = IEEE80211_KEYIX_NONE;
	}
	wk.ik_keylen = key_len;
	memcpy(wk.ik_keydata, key, key_len);

	ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk));
	if (ret < 0) {
		wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s"
			   " key_idx %d alg %d key_len %lu set_tx %d)",
			   __func__, ether_sprintf(wk.ik_macaddr), key_idx,
			   alg, (unsigned long) key_len, set_tx);
	}

	return ret;
}

开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:59，代码来源:driver_madwifi.c

示例9: madwifi_set_key

static int
madwifi_set_key(const char *ifname, void *priv, const char *alg,
		const u8 *addr, int key_idx,
		const u8 *key, size_t key_len, int txkey)
{
	struct madwifi_driver_data *drv = priv;
	struct ieee80211req_key wk;
	u_int8_t cipher;
	int ret;

	if (strcmp(alg, "none") == 0)
		return madwifi_del_key(drv, addr, key_idx);

	wpa_printf(MSG_DEBUG, "%s: alg=%s addr=%s key_idx=%d",
		   __func__, alg, ether_sprintf(addr), key_idx);

	if (strcmp(alg, "WEP") == 0)
		cipher = IEEE80211_CIPHER_WEP;
	else if (strcmp(alg, "TKIP") == 0)
		cipher = IEEE80211_CIPHER_TKIP;
	else if (strcmp(alg, "CCMP") == 0)
		cipher = IEEE80211_CIPHER_AES_CCM;
	else {
		printf("%s: unknown/unsupported algorithm %s\n",
			__func__, alg);
		return -1;
	}

	if (key_len > sizeof(wk.ik_keydata)) {
		printf("%s: key length %lu too big\n", __func__,
		       (unsigned long) key_len);
		return -3;
	}

	memset(&wk, 0, sizeof(wk));
	wk.ik_type = cipher;
	wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT;
	if (addr == NULL) {
		memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN);
		wk.ik_keyix = key_idx;
		wk.ik_flags |= IEEE80211_KEY_DEFAULT;
	} else {
		memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
		wk.ik_keyix = IEEE80211_KEYIX_NONE;
	}
	wk.ik_keylen = key_len;
	memcpy(wk.ik_keydata, key, key_len);

	ret = set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk));
	if (ret < 0) {
		wpa_printf(MSG_DEBUG, "%s: Failed to set key (addr %s"
			   " key_idx %d alg '%s' key_len %lu txkey %d)",
			   __func__, ether_sprintf(wk.ik_macaddr), key_idx,
			   alg, (unsigned long) key_len, txkey);
	}

	return ret;
}

开发者ID:Rajeev-Sirasanagandla，项目名称:t80_platform_external，代码行数:58，代码来源:driver_madwifi.c

示例10: atheros_set_opt_ie

static int
atheros_set_opt_ie(void *priv, const u8 *ie, size_t ie_len)
{
	struct atheros_driver_data *drv = priv;
	u8 buf[512];
	struct ieee80211req_getset_appiebuf *app_ie;

	wpa_printf(MSG_DEBUG, "%s buflen = %lu", __func__,
		   (unsigned long) ie_len);

	wpabuf_free(drv->wpa_ie);
	drv->wpa_ie = wpabuf_alloc_copy(ie, ie_len);

	app_ie = (struct ieee80211req_getset_appiebuf *) buf;
	os_memcpy(&(app_ie->app_buf[0]), ie, ie_len);
	app_ie->app_buflen = ie_len;

	app_ie->app_frmtype = IEEE80211_APPIE_FRAME_BEACON;

	/* append WPS IE for Beacon */
	if (drv->wps_beacon_ie != NULL) {
		os_memcpy(&(app_ie->app_buf[ie_len]),
			  wpabuf_head(drv->wps_beacon_ie),
			  wpabuf_len(drv->wps_beacon_ie));
		app_ie->app_buflen = ie_len + wpabuf_len(drv->wps_beacon_ie);
	}
	set80211priv(drv, IEEE80211_IOCTL_SET_APPIEBUF, app_ie,
		     sizeof(struct ieee80211req_getset_appiebuf) +
		     app_ie->app_buflen);

	/* append WPS IE for Probe Response */
	app_ie->app_frmtype = IEEE80211_APPIE_FRAME_PROBE_RESP;
	if (drv->wps_probe_resp_ie != NULL) {
		os_memcpy(&(app_ie->app_buf[ie_len]),
			  wpabuf_head(drv->wps_probe_resp_ie),
			  wpabuf_len(drv->wps_probe_resp_ie));
		app_ie->app_buflen = ie_len +
			wpabuf_len(drv->wps_probe_resp_ie);
	} else
		app_ie->app_buflen = ie_len;
	set80211priv(drv, IEEE80211_IOCTL_SET_APPIEBUF, app_ie,
		     sizeof(struct ieee80211req_getset_appiebuf) +
		     app_ie->app_buflen);
	return 0;
}

开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:45，代码来源:driver_atheros.c

示例11: sta_deauth

/*解除链路验证*/
int sta_deauth(u8 *addr, int reason_code, apdata_info *pap)
{
	struct ieee80211req_mlme mlme;
	DPrintf("[WAPID]:: deauth STA("MACSTR")\n", MAC2STR(addr));
	mlme.im_op = IEEE80211_MLME_DEAUTH;
	mlme.im_reason = reason_code;
	memcpy(mlme.im_macaddr, addr, WLAN_ADDR_LEN);
	return set80211priv(pap, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:10，代码来源:wai_sta.c

示例12: madwifi_process_wpa_ie

static int
madwifi_process_wpa_ie(struct madwifi_driver_data *drv, struct sta_info *sta)
{
	struct hostapd_data *hapd = drv->hapd;
	struct ieee80211req_wpaie ie;
	int ielen, res;
	u8 *iebuf;

	/*
	 * Fetch negotiated WPA/RSN parameters from the system.
	 */
	memset(&ie, 0, sizeof(ie));
	memcpy(ie.wpa_macaddr, sta->addr, IEEE80211_ADDR_LEN);
	if (set80211priv(drv, IEEE80211_IOCTL_GETWPAIE, &ie, sizeof(ie))) {
		wpa_printf(MSG_ERROR, "%s: Failed to get WPA/RSN IE",
			   __func__);
		printf("Failed to get WPA/RSN information element.\n");
		return -1;		/* XXX not right */
	}
	wpa_hexdump(MSG_MSGDUMP, "madwifi req WPA IE",
		    ie.wpa_ie, IEEE80211_MAX_OPT_IE);
	wpa_hexdump(MSG_MSGDUMP, "madwifi req RSN IE",
		    ie.rsn_ie, IEEE80211_MAX_OPT_IE);
	iebuf = ie.wpa_ie;
	/* madwifi seems to return some random data if WPA/RSN IE is not set.
	 * Assume the IE was not included if the IE type is unknown. */
	if (iebuf[0] != WLAN_EID_VENDOR_SPECIFIC)
		iebuf[1] = 0;
#ifdef MADWIFI_NG
	if (iebuf[1] == 0 && ie.rsn_ie[1] > 0) {
		/* madwifi-ng svn #1453 added rsn_ie. Use it, if wpa_ie was not
		 * set. This is needed for WPA2. */
		iebuf = ie.rsn_ie;
		if (iebuf[0] != WLAN_EID_RSN)
			iebuf[1] = 0;
	}
#endif /* MADWIFI_NG */
	ielen = iebuf[1];
	if (ielen == 0) {
		printf("No WPA/RSN information element for station!?\n");
		return -1;		/* XXX not right */
	}
	ielen += 2;
	if (sta->wpa_sm == NULL)
		sta->wpa_sm = wpa_auth_sta_init(hapd->wpa_auth, sta->addr);
	if (sta->wpa_sm == NULL) {
		printf("Failed to initialize WPA state machine\n");
		return -1;
	}
	res = wpa_validate_wpa_ie(hapd->wpa_auth, sta->wpa_sm,
				  iebuf, ielen, NULL, 0);
	if (res != WPA_IE_OK) {
		printf("WPA/RSN information element rejected? (res %u)\n", res);
		return -1;
	}
	return 0;
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:57，代码来源:driver_madwifi.c

示例13: wpa_driver_madwifi_associate

static int
wpa_driver_madwifi_associate(void *priv,
			     struct wpa_driver_associate_params *params)
{
	struct wpa_driver_madwifi_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int ret = 0, privacy = 1;

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	/*
	 * NB: Don't need to set the freq or cipher-related state as
	 *     this is implied by the bssid which is used to locate
	 *     the scanned node state which holds it.  The ssid is
	 *     needed to disambiguate an AP that broadcasts multiple
	 *     ssid's but uses the same bssid.
	 */
	/* XXX error handling is wrong but unclear what to do... */
	if (wpa_driver_madwifi_set_wpa_ie(drv, params->wpa_ie,
					  params->wpa_ie_len) < 0)
		ret = -1;

	if (params->pairwise_suite == CIPHER_NONE &&
	    params->group_suite == CIPHER_NONE &&
	    params->key_mgmt_suite == KEY_MGMT_NONE &&
	    params->wpa_ie_len == 0)
		privacy = 0;

	if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy, 1) < 0)
		ret = -1;

	if (params->bssid == NULL) {
		/* ap_scan=2 mode - driver takes care of AP selection and
		 * roaming */
		/* FIX: this does not seem to work; would probably need to
		 * change something in the driver */
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
			ret = -1;
	}

	if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
				     params->ssid_len) < 0)
		ret = -1;
	if (params->bssid) {
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
			ret = -1;
		memset(&mlme, 0, sizeof(mlme));
		mlme.im_op = IEEE80211_MLME_ASSOC;
		memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
		if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
				 sizeof(mlme), 1) < 0)
			ret = -1;
	}

	return ret;
}

开发者ID:vutukurikishore，项目名称:wpa_supplicant，代码行数:56，代码来源:driver_madwifi.c

示例14: wpa_driver_realtek_associate

static int
wpa_driver_realtek_associate(void *priv,
			     struct wpa_driver_associate_params *params)
{
	struct wpa_driver_realtek_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int ret = 0, privacy = 1;

	printf("Wpa_supplicant: %s +++\n", __FUNCTION__);

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	//_Eric ?? if ret = -1, why still run continuously?

	if(realtek_config_security(drv, params) < 0)
		ret = -9;

	if (params->bssid == NULL) {

		//_Eric ?? it means no MAC but have SSID(name), driver shall try to find this AP automatically?
		
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
			ret = -2;

		if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
					     params->ssid_len) < 0)
			ret = -3;
		
	} else {
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
			ret = -4;
		if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
					     params->ssid_len) < 0)
			ret = -5;
		os_memset(&mlme, 0, sizeof(mlme));
		mlme.im_op = IEEE80211_MLME_ASSOC;
		os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);

		printf("Try to assoc %02x:%02x:%02x:%02x:%02x:%02x \n", 
			params->bssid[0], params->bssid[1], params->bssid[2],
			params->bssid[3], params->bssid[4], params->bssid[5]);

		if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
				 sizeof(mlme), 1) < 0) {
			wpa_printf(MSG_DEBUG, "%s: SETMLME[ASSOC] failed",
				   __func__);
			ret = -1;
		}
	}

	printf("Wpa_supplicant: %s --- ret = %d\n", __FUNCTION__, ret);
	
	return ret;
	
}

开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:55，代码来源:driver_realtek.c

示例15: madwifi_new_sta

static void
madwifi_new_sta(struct madwifi_driver_data *drv, u8 addr[IEEE80211_ADDR_LEN])
{
	struct hostapd_data *hapd = drv->hapd;
	struct ieee80211req_wpaie ie;
	int ielen = 0;
	u8 *iebuf = NULL;

	/*
	 * Fetch negotiated WPA/RSN parameters from the system.
	 */
	memset(&ie, 0, sizeof(ie));
	memcpy(ie.wpa_macaddr, addr, IEEE80211_ADDR_LEN);
	if (set80211priv(drv, IEEE80211_IOCTL_GETWPAIE, &ie, sizeof(ie))) {
		/*
		 * See ATH_WPS_IE comment in the beginning of the file for a
		 * possible cause for the failure..
		 */
		wpa_printf(MSG_DEBUG, "%s: Failed to get WPA/RSN IE: %s",
			   __func__, strerror(errno));
		goto no_ie;
	}
	wpa_hexdump(MSG_MSGDUMP, "madwifi req WPA IE",
		    ie.wpa_ie, IEEE80211_MAX_OPT_IE);
	wpa_hexdump(MSG_MSGDUMP, "madwifi req RSN IE",
		    ie.rsn_ie, IEEE80211_MAX_OPT_IE);
	iebuf = ie.wpa_ie;
	/* madwifi seems to return some random data if WPA/RSN IE is not set.
	 * Assume the IE was not included if the IE type is unknown. */
	if (iebuf[0] != WLAN_EID_VENDOR_SPECIFIC)
		iebuf[1] = 0;
	if (iebuf[1] == 0 && ie.rsn_ie[1] > 0) {
		/* madwifi-ng svn #1453 added rsn_ie. Use it, if wpa_ie was not
		 * set. This is needed for WPA2. */
		iebuf = ie.rsn_ie;
		if (iebuf[0] != WLAN_EID_RSN)
			iebuf[1] = 0;
	}

	ielen = iebuf[1];
	if (ielen == 0)
		iebuf = NULL;
	else
		ielen += 2;

no_ie:
	drv_event_assoc(hapd, addr, iebuf, ielen);

	if (memcmp(addr, drv->acct_mac, ETH_ALEN) == 0) {
		/* Cached accounting data is not valid anymore. */
		memset(drv->acct_mac, 0, ETH_ALEN);
		memset(&drv->acct_data, 0, sizeof(drv->acct_data));
	}
}

开发者ID:AxelLin，项目名称:Drv，代码行数:54，代码来源:driver_atheros.c

示例16: sta_authed

int sta_authed(u8 *addr, int authorized, apdata_info *pap)
{
	struct ieee80211req_mlme mlme;

	if(authorized)
		mlme.im_op = IEEE80211_MLME_AUTHORIZE;
	else
		mlme.im_op = IEEE80211_MLME_UNAUTHORIZE;
	mlme.im_reason = 0;
	memcpy(mlme.im_macaddr, addr, WLAN_ADDR_LEN);
	return set80211priv(pap, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
}

开发者ID:KHATEEBNSIT，项目名称:AP，代码行数:12，代码来源:wai_sta.c

示例17: wpa_driver_madwifi_disassociate

static int
wpa_driver_madwifi_disassociate(void *priv, const u8 *addr, int reason_code)
{
	struct wpa_driver_madwifi_data *drv = priv;
	struct ieee80211req_mlme mlme;

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
	mlme.im_op = IEEE80211_MLME_DISASSOC;
	mlme.im_reason = reason_code;
	os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
	return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1);
}

开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:12，代码来源:driver_madwifi.c

示例18: wpa_driver_madwifi_set_key

static int
wpa_driver_madwifi_set_key(const char *ifname, wpa_alg alg,
			   unsigned char *addr, int key_idx,
			   int set_tx, u8 *seq, size_t seq_len,
			   u8 *key, size_t key_len)
{
  struct ieee80211req_key wk;
  char *alg_name;
  u_int8_t cipher;

  if (alg == WPA_ALG_NONE)
    return 0;

  switch (alg) {
      case WPA_ALG_WEP:
	alg_name = "WEP";
	cipher = IEEE80211_CIPHER_WEP;
	break;
      case WPA_ALG_TKIP:
	alg_name = "TKIP";
	cipher = IEEE80211_CIPHER_TKIP;
	break;
      case WPA_ALG_CCMP:
	alg_name = "CCMP";
	cipher = IEEE80211_CIPHER_AES_CCM;
	break;
      default:
	return -1;
  }

  if (seq_len > sizeof(u_int64_t)) {
    return -2;
  }
  if (key_len > sizeof(wk.ik_keydata)) {
    return -3;
  }

  memset(&wk, 0, sizeof(wk));
  wk.ik_type = cipher;
  wk.ik_flags = IEEE80211_KEY_RECV;
  if (set_tx) {
    wk.ik_flags |= IEEE80211_KEY_XMIT | IEEE80211_KEY_DEFAULT;
    memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
  } else
    memset(wk.ik_macaddr, 0, IEEE80211_ADDR_LEN);
  wk.ik_keyix = key_idx;
  wk.ik_keylen = key_len;
  memcpy(&wk.ik_keyrsc, seq, seq_len);
  memcpy(wk.ik_keydata, key, key_len);

  return set80211priv(ifname, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk));
}

开发者ID:BackupTheBerlios，项目名称:sax-svn，代码行数:52，代码来源:wlan.c

示例19: atheros_add_sta_node

static int atheros_add_sta_node(void *priv, const u8 *addr, u16 auth_alg)
{
	struct atheros_driver_data *drv = priv;
	struct ieee80211req_res req;
	struct ieee80211req_res_addnode *addnode = &req.u.addnode;

	wpa_printf(MSG_DEBUG, "%s", __func__);
	req.type = IEEE80211_RESREQ_ADDNODE;
	os_memcpy(&req.macaddr[0], addr, IEEE80211_ADDR_LEN);
	addnode->auth_alg = auth_alg;
	return set80211priv(drv, IEEE80211_IOCTL_RES_REQ, &req,
			    sizeof(struct ieee80211req_res));
}

开发者ID:tcdog001，项目名称:apv5sdk-v15，代码行数:13，代码来源:driver_atheros.c

示例20: main

int
main(int argc, char *argv[])
{
	const char *ifname = "wifi0";
	struct ieee80211req_chanlist chanlist;
	int c;

	progname = argv[0];
	while ((c = getopt(argc, argv, "i:")) != -1)
		switch (c) {
		case 'i':
			ifname = optarg;
			break;
		default:
			usage();
			/*NOTREACHED*/
		}
	argc -= optind;
	argv += optind;
	if (argc < 1)
		usage();

	memset(&chanlist, 0, sizeof(chanlist));
	for (; argc > 0; argc--, argv++) {
		int first, last, f;

		switch (sscanf(argv[0], "%u-%u", &first, &last)) {
		case 1:
			if (first > MAXCHAN)
				errx(-1, "%s: channel %u out of range, max %u",
					progname, first, MAXCHAN);
			setbit(chanlist.ic_channels, first);
			break;
		case 2:
			if (first > MAXCHAN)
				errx(-1, "%s: channel %u out of range, max %u",
					progname, first, MAXCHAN);
			if (last > MAXCHAN)
				errx(-1, "%s: channel %u out of range, max %u",
					progname, last, MAXCHAN);
			if (first > last)
				errx(-1, "%s: void channel range, %u > %u",
					progname, first, last);
			for (f = first; f <= last; f++)
				setbit(chanlist.ic_channels, f);
			break;
		}
	}
	return set80211priv(ifname, IEEE80211_IOCTL_SETCHANLIST,
		&chanlist, sizeof(chanlist), 1);
}

开发者ID:lezbar，项目名称:madwifi-be，代码行数:51，代码来源:athchans.c

注：本文中的set80211priv函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ setAcceptDrops函数代码示例发布时间：2022-05-30

C++ set80211param函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19155|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8632|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8615|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8647|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7530|2022-11-06

客服电话

电子邮件

C++ set80211priv函数代码示例

示例1: main

示例2: atheros_del_key

示例3: atheros_read_sta_driver_data

示例4: ar6000_set_wps_ie

示例5: ar6000_set_sta_authorized

示例6: atheros_set_wps_ie

示例7: wpa_driver_realtek_set_probe_req_ie

示例8: wpa_driver_madwifi_set_key

示例9: madwifi_set_key

示例10: atheros_set_opt_ie

示例11: sta_deauth

示例12: madwifi_process_wpa_ie

示例13: wpa_driver_madwifi_associate

示例14: wpa_driver_realtek_associate

示例15: madwifi_new_sta

示例16: sta_authed

示例17: wpa_driver_madwifi_disassociate

示例18: wpa_driver_madwifi_set_key

示例19: atheros_add_sta_node

示例20: main

请发表评论

全部评论

上一篇：

下一篇：

CVE-2022-30791

solegalli/feature-selection-for-machine-

nvim-lualine/lualine.nvim: A blazing fas

kentcdodds/dom-testing-library-with-anyt

win7系统重装系统初始设置的操作方法

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053