• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ set80211param函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中set80211param函数的典型用法代码示例。如果您正苦于以下问题：C++ set80211param函数的具体用法？C++ set80211param怎么用？C++ set80211param使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了set80211param函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: madwifi_set_ieee8021x

static int
madwifi_set_ieee8021x(void *priv, struct wpa_bss_params *params)
{
	struct madwifi_driver_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, params->enabled);

	if (!params->enabled) {
		/* XXX restore state */
		return set80211param(priv, IEEE80211_PARAM_AUTHMODE,
			IEEE80211_AUTH_AUTO);
	}
	if (!params->wpa && !params->ieee802_1x) {
		wpa_printf(MSG_WARNING, "No 802.1X or WPA enabled!");
		return -1;
	}
	if (params->wpa && madwifi_configure_wpa(drv, params) != 0) {
		wpa_printf(MSG_WARNING, "Error configuring WPA state!");
		return -1;
	}
	if (set80211param(priv, IEEE80211_PARAM_AUTHMODE,
		(params->wpa ? IEEE80211_AUTH_WPA : IEEE80211_AUTH_8021X))) {
		wpa_printf(MSG_WARNING, "Error enabling WPA/802.1X!");
		return -1;
	}

	return 0;
}
开发者ID:LiZhaoxing，项目名称:hostapd，代码行数:28，代码来源:driver_madwifi.c


示例2: madwifi_set_ieee8021x

static int
madwifi_set_ieee8021x(const char *ifname, void *priv, int enabled)
{
	struct madwifi_driver_data *drv = priv;
	struct hostapd_data *hapd = drv->hapd;
	struct hostapd_bss_config *conf = hapd->conf;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);

	if (!enabled) {
		/* XXX restore state */
		return set80211param(priv, IEEE80211_PARAM_AUTHMODE,
			IEEE80211_AUTH_AUTO);
	}
	if (!conf->wpa && !conf->ieee802_1x) {
		hostapd_logger(hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "No 802.1X or WPA enabled!");
		return -1;
	}
	if (conf->wpa && madwifi_configure_wpa(drv) != 0) {
		hostapd_logger(hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "Error configuring WPA state!");
		return -1;
	}
	if (set80211param(priv, IEEE80211_PARAM_AUTHMODE,
		(conf->wpa ?  IEEE80211_AUTH_WPA : IEEE80211_AUTH_8021X))) {
		hostapd_logger(hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "Error enabling WPA/802.1X!");
		return -1;
	}

	return 0;
}
开发者ID:Rajeev-Sirasanagandla，项目名称:t80_platform_external，代码行数:33，代码来源:driver_madwifi.c


示例3: wpa_driver_madwifi_deinit

static void wpa_driver_madwifi_deinit(void *priv)
{
	struct wpa_driver_madwifi_data *drv = priv;

	if (wpa_driver_madwifi_set_wpa_ie(drv, NULL, 0) < 0) {
		wpa_printf(MSG_DEBUG, "%s: failed to clear WPA IE",
			   __FUNCTION__);
	}
	if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0) {
		wpa_printf(MSG_DEBUG, "%s: failed to enable driver-based "
			   "roaming", __FUNCTION__);
	}
	if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0, 1) < 0) {
		wpa_printf(MSG_DEBUG, "%s: failed to disable forced Privacy "
			   "flag", __FUNCTION__);
	}
	if (set80211param(drv, IEEE80211_PARAM_WPA, 0, 1) < 0) {
		wpa_printf(MSG_DEBUG, "%s: failed to disable WPA",
			   __FUNCTION__);
	}

	wpa_driver_wext_deinit(drv->wext);

	close(drv->sock);
	os_free(drv);
}
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:26，代码来源:driver_madwifi.c


示例4: atheros_set_ieee8021x

static int
atheros_set_ieee8021x(void *priv, struct wpa_bss_params *params)
{
	struct atheros_driver_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, params->enabled);

	if (!params->enabled) {
		/* XXX restore state */
		if (set80211param(priv, IEEE80211_PARAM_AUTHMODE,
				  IEEE80211_AUTH_AUTO) < 0)
			return -1;
		/* IEEE80211_AUTH_AUTO ends up enabling Privacy; clear that */
		return atheros_set_privacy(drv, 0);
	}
	if (!params->wpa && !params->ieee802_1x) {
		hostapd_logger(drv->hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "No 802.1X or WPA enabled!");
		return -1;
	}
	if (params->wpa && atheros_configure_wpa(drv, params) != 0) {
		hostapd_logger(drv->hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "Error configuring WPA state!");
		return -1;
	}
	if (set80211param(priv, IEEE80211_PARAM_AUTHMODE,
		(params->wpa ? IEEE80211_AUTH_WPA : IEEE80211_AUTH_8021X))) {
		hostapd_logger(drv->hapd, NULL, HOSTAPD_MODULE_DRIVER,
			HOSTAPD_LEVEL_WARNING, "Error enabling WPA/802.1X!");
		return -1;
	}

	return 0;
}
开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:34，代码来源:driver_atheros.c


示例5: bsd_set_ieee8021x

static int
bsd_set_ieee8021x(void *priv, struct wpa_bss_params *params)
{
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, params->enabled);

	if (!params->enabled) {
		/* XXX restore state */
		return set80211param(priv, IEEE80211_IOC_AUTHMODE,
				     IEEE80211_AUTH_AUTO);
	}
	if (!params->wpa && !params->ieee802_1x) {
		wpa_printf(MSG_ERROR, "%s: No 802.1X or WPA enabled",
			   __func__);
		return -1;
	}
	if (params->wpa && bsd_configure_wpa(priv, params) != 0) {
		wpa_printf(MSG_ERROR, "%s: Failed to configure WPA state",
			   __func__);
		return -1;
	}
	if (set80211param(priv, IEEE80211_IOC_AUTHMODE,
		(params->wpa ? IEEE80211_AUTH_WPA : IEEE80211_AUTH_8021X))) {
		wpa_printf(MSG_ERROR, "%s: Failed to enable WPA/802.1X",
			   __func__);
		return -1;
	}
	return bsd_ctrl_iface(priv, 1);
}
开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:28，代码来源:driver_bsd.c


示例6: wpa_driver_bsd_deinit

static void
wpa_driver_bsd_deinit(void *priv)
{
	struct wpa_driver_bsd_data *drv = priv;
	int flags;

	/* NB: mark interface down */
	if (getifflags(drv, &flags) == 0)
		(void) setifflags(drv, flags &~ IFF_UP);

	wpa_driver_bsd_set_wpa_internal(drv, drv->prev_wpa, drv->prev_privacy);
	if (set80211param(drv, IEEE80211_IOC_ROAMING, drv->prev_roaming) < 0) {
		/* NB: don't whinge if device ejected or equivalent */
		if (errno != ENXIO)
			wpa_printf(MSG_DEBUG, "%s: failed to restore roaming "
			    "state", __func__);
	}
	if (drv->drivercaps & IEEE80211_C_BGSCAN) {
		/* XXX check return value */
		(void) set80211param(drv, IEEE80211_IOC_SCANVALID,
		    drv->prev_scanvalid);
	}

	(void) close(drv->route);		/* ioctl socket */
	(void) close(drv->sock);		/* event socket */
	free(drv);
}
开发者ID:mihaicarabas，项目名称:dragonfly，代码行数:27，代码来源:driver_dragonfly.c


示例7: wpa_driver_madwifi_associate

static int
wpa_driver_madwifi_associate(void *priv,
			     struct wpa_driver_associate_params *params)
{
	struct wpa_driver_madwifi_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int ret = 0, privacy = 1;

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	/*
	 * NB: Don't need to set the freq or cipher-related state as
	 *     this is implied by the bssid which is used to locate
	 *     the scanned node state which holds it.  The ssid is
	 *     needed to disambiguate an AP that broadcasts multiple
	 *     ssid's but uses the same bssid.
	 */
	/* XXX error handling is wrong but unclear what to do... */
	if (wpa_driver_madwifi_set_wpa_ie(drv, params->wpa_ie,
					  params->wpa_ie_len) < 0)
		ret = -1;

	if (params->pairwise_suite == CIPHER_NONE &&
	    params->group_suite == CIPHER_NONE &&
	    params->key_mgmt_suite == KEY_MGMT_NONE &&
	    params->wpa_ie_len == 0)
		privacy = 0;

	if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy, 1) < 0)
		ret = -1;

	if (params->bssid == NULL) {
		/* ap_scan=2 mode - driver takes care of AP selection and
		 * roaming */
		/* FIX: this does not seem to work; would probably need to
		 * change something in the driver */
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
			ret = -1;
	}

	if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
				     params->ssid_len) < 0)
		ret = -1;
	if (params->bssid) {
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
			ret = -1;
		memset(&mlme, 0, sizeof(mlme));
		mlme.im_op = IEEE80211_MLME_ASSOC;
		memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
		if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
				 sizeof(mlme), 1) < 0)
			ret = -1;
	}

	return ret;
}
开发者ID:vutukurikishore，项目名称:wpa_supplicant，代码行数:56，代码来源:driver_madwifi.c


示例8: wpa_driver_realtek_associate

static int
wpa_driver_realtek_associate(void *priv,
			     struct wpa_driver_associate_params *params)
{
	struct wpa_driver_realtek_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int ret = 0, privacy = 1;

	printf("Wpa_supplicant: %s +++\n", __FUNCTION__);

	wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);

	//_Eric ?? if ret = -1, why still run continuously?

	if(realtek_config_security(drv, params) < 0)
		ret = -9;

	if (params->bssid == NULL) {

		//_Eric ?? it means no MAC but have SSID(name), driver shall try to find this AP automatically?
		
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
			ret = -2;

		if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
					     params->ssid_len) < 0)
			ret = -3;
		
	} else {
		if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
			ret = -4;
		if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
					     params->ssid_len) < 0)
			ret = -5;
		os_memset(&mlme, 0, sizeof(mlme));
		mlme.im_op = IEEE80211_MLME_ASSOC;
		os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);

		printf("Try to assoc %02x:%02x:%02x:%02x:%02x:%02x \n", 
			params->bssid[0], params->bssid[1], params->bssid[2],
			params->bssid[3], params->bssid[4], params->bssid[5]);

		if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
				 sizeof(mlme), 1) < 0) {
			wpa_printf(MSG_DEBUG, "%s: SETMLME[ASSOC] failed",
				   __func__);
			ret = -1;
		}
	}

	printf("Wpa_supplicant: %s --- ret = %d\n", __FUNCTION__, ret);
	
	return ret;
	
}
开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:55，代码来源:driver_realtek.c


示例9: wpa_driver_bsd_associate

static int
wpa_driver_bsd_associate(void *priv, struct wpa_driver_associate_params *params)
{
	struct wpa_driver_bsd_data *drv = priv;
	struct ieee80211req_mlme mlme;
	int privacy;

	wpa_printf(MSG_DEBUG,
		"%s: ssid '%.*s' wpa ie len %u pairwise %u group %u key mgmt %u"
		, __func__
		, params->ssid_len, params->ssid
		, params->wpa_ie_len
		, params->pairwise_suite
		, params->group_suite
		, params->key_mgmt_suite
	);

	/* XXX error handling is wrong but unclear what to do... */
	if (wpa_driver_bsd_set_wpa_ie(drv, params->wpa_ie, params->wpa_ie_len) < 0)
		return -1;
#ifndef NEW_FREEBSD_MLME_ASSOC
	if (wpa_driver_bsd_set_ssid(drv, params->ssid, params->ssid_len) < 0)
		return -1;
#endif

	privacy = !(params->pairwise_suite == CIPHER_NONE &&
	    params->group_suite == CIPHER_NONE &&
	    params->key_mgmt_suite == KEY_MGMT_NONE &&
	    params->wpa_ie_len == 0);
	wpa_printf(MSG_DEBUG, "%s: set PRIVACY %u", __func__, privacy);

	if (set80211param(drv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		return -1;

	if (params->wpa_ie_len &&
	    set80211param(drv, IEEE80211_IOC_WPA,
			  params->wpa_ie[0] == RSN_INFO_ELEM ? 2 : 1) < 0)
		return -1;

	memset(&mlme, 0, sizeof(mlme));
	mlme.im_op = IEEE80211_MLME_ASSOC;
#ifdef NEW_FREEBSD_MLME_ASSOC
	if (params->ssid != NULL)
		memcpy(mlme.im_ssid, params->ssid, params->ssid_len);
	mlme.im_ssid_len = params->ssid_len;
#endif
	if (params->bssid != NULL)
		memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
	if (set80211var(drv, IEEE80211_IOC_MLME, &mlme, sizeof(mlme)) < 0)
		return -1;
	return 0;
}
开发者ID:vutukurikishore，项目名称:wpa_supplicant，代码行数:52，代码来源:driver_bsd.c


示例10: wpa_driver_madwifi_set_wpa

static int
wpa_driver_madwifi_set_wpa(const char *ifname, int enabled)
{
  int ret = 0;

  if (set80211param(ifname, IEEE80211_PARAM_ROAMING, enabled ? 2 : 0) < 0)
    ret = -1;
  if (set80211param(ifname, IEEE80211_PARAM_PRIVACY, enabled) < 0)
    ret = -1;
  if (set80211param(ifname, IEEE80211_PARAM_WPA, enabled ? 3 : 0) < 0)
    ret = -1;

  return ret;
}
开发者ID:BackupTheBerlios，项目名称:sax-svn，代码行数:14，代码来源:wlan.c


示例11: wpa_driver_madwifi_set_drop_unencrypted

static int
wpa_driver_madwifi_set_drop_unencrypted(void *priv, int enabled)
{
	struct wpa_driver_madwifi_data *drv = priv;
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
	return set80211param(drv, IEEE80211_PARAM_DROPUNENCRYPTED, enabled, 1);
}
开发者ID:qwerty1023，项目名称:wive-rtnl-firmware，代码行数:7，代码来源:driver_madwifi.c


示例12: bsd_set_privacy

static int
bsd_set_privacy(void *priv, int enabled)
{
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);

	return set80211param(priv, IEEE80211_IOC_PRIVACY, enabled);
}
开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:7，代码来源:driver_bsd.c


示例13: atheros_set_countermeasures

static int
atheros_set_countermeasures(void *priv, int enabled)
{
	struct atheros_driver_data *drv = priv;
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
	return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled);
}
开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:7，代码来源:driver_atheros.c


示例14: wpa_driver_bsd_set_drop_unencrypted

static int
wpa_driver_bsd_set_drop_unencrypted(void *priv, int enabled)
{
	struct wpa_driver_bsd_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);
	return set80211param(drv, IEEE80211_IOC_DROPUNENCRYPTED, enabled);
}
开发者ID:mihaicarabas，项目名称:dragonfly，代码行数:8，代码来源:driver_dragonfly.c


示例15: wpa_driver_bsd_set_wpa_internal

static int
wpa_driver_bsd_set_wpa_internal(void *priv, int wpa, int privacy)
{
	int ret = 0;

	wpa_printf(MSG_DEBUG, "%s: wpa=%d privacy=%d",
		__FUNCTION__, wpa, privacy);

	if (!wpa && wpa_driver_bsd_set_wpa_ie(priv, NULL, 0) < 0)
		ret = -1;
	if (set80211param(priv, IEEE80211_IOC_PRIVACY, privacy) < 0)
		ret = -1;
	if (set80211param(priv, IEEE80211_IOC_WPA, wpa) < 0)
		ret = -1;

	return ret;
}
开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:17，代码来源:driver_bsd.c


示例16: wpa_driver_bsd_set_countermeasures

static int
wpa_driver_bsd_set_countermeasures(void *priv, int enabled)
{
	struct wpa_driver_bsd_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);
	return set80211param(drv, IEEE80211_IOC_COUNTERMEASURES, enabled);
}
开发者ID:mihaicarabas，项目名称:dragonfly，代码行数:8，代码来源:driver_dragonfly.c


示例17: wpa_driver_realtek_set_countermeasures

static int
wpa_driver_realtek_set_countermeasures(void *priv, int enabled)
{
	struct wpa_driver_realtek_data *drv = priv;

	printf("Wpa_supplicant: %s +++\n", __FUNCTION__);
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
	return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled, 1);
}
开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:9，代码来源:driver_realtek.c


示例18: atheros_set_privacy

static int
atheros_set_privacy(void *priv, int enabled)
{
	struct atheros_driver_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);

	return set80211param(drv, IEEE80211_PARAM_PRIVACY, enabled);
}
开发者ID:MultiNet-80211，项目名称:Hostapd，代码行数:9，代码来源:driver_atheros.c


示例19: wpa_driver_realtek_set_drop_unencrypted

static int
wpa_driver_realtek_set_drop_unencrypted(void *priv, int enabled)
{
	struct wpa_driver_realtek_data *drv = priv;

	printf("Wpa_supplicant: %s +++\n", __FUNCTION__);
	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
	return set80211param(drv, IEEE80211_PARAM_DROPUNENCRYPTED, enabled, 1);
}
开发者ID:jameshilliard，项目名称:WECB-BH-GPL，代码行数:9，代码来源:driver_realtek.c


示例20: madwifi_set_privacy

static int
madwifi_set_privacy(const char *ifname, void *priv, int enabled)
{
	struct madwifi_driver_data *drv = priv;

	wpa_printf(MSG_DEBUG, "%s: enabled=%d", __func__, enabled);

	return set80211param(drv, IEEE80211_PARAM_PRIVACY, enabled);
}
开发者ID:Rajeev-Sirasanagandla，项目名称:t80_platform_external，代码行数:9，代码来源:driver_madwifi.c



注：本文中的set80211param函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ set80211priv函数代码示例发布时间：2022-05-30
下一篇：
C++ set2函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap