C++ sdio_enable_func函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中sdio_enable_func函数的典型用法代码示例。如果您正苦于以下问题：C++ sdio_enable_func函数的具体用法？C++ sdio_enable_func怎么用？C++ sdio_enable_func使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了sdio_enable_func函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: brcmf_sdioh_enablefuncs

static int brcmf_sdioh_enablefuncs(struct brcmf_sdio_dev *sdiodev)
{
	int err_ret;
	u32 fbraddr;
	u8 func;

	brcmf_dbg(TRACE, "\n");

	/* Get the Card's common CIS address */
	sdiodev->func_cis_ptr[0] = brcmf_sdioh_get_cisaddr(sdiodev,
							   SDIO_CCCR_CIS);
	brcmf_dbg(INFO, "Card's Common CIS Ptr = 0x%x\n",
		  sdiodev->func_cis_ptr[0]);

	/* Get the Card's function CIS (for each function) */
	for (fbraddr = SDIO_FBR_BASE(1), func = 1;
	     func <= sdiodev->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) {
		sdiodev->func_cis_ptr[func] =
		    brcmf_sdioh_get_cisaddr(sdiodev, SDIO_FBR_CIS + fbraddr);
		brcmf_dbg(INFO, "Function %d CIS Ptr = 0x%x\n",
			  func, sdiodev->func_cis_ptr[func]);
	}

	/* Enable Function 1 */
	sdio_claim_host(sdiodev->func[1]);
	err_ret = sdio_enable_func(sdiodev->func[1]);
	sdio_release_host(sdiodev->func[1]);
	if (err_ret)
		brcmf_dbg(ERROR, "Failed to enable F1 Err: 0x%08x\n", err_ret);

	return false;
}

开发者ID:webom2008，项目名称:am335x.002.Kernel，代码行数:32，代码来源:bcmsdh_sdmmc.c

示例2: sdio_detect_probe

/*!
 * \brief hif_sdio probe function
 *
 * hif_sdio probe function called by mmc driver when any matched SDIO function
 * is detected by it.
 *
 * \param func
 * \param id
 *
 * \retval 0    register successfully
 * \retval < 0  list error code here
 */
static int sdio_detect_probe (
    struct sdio_func *func,
    const struct sdio_device_id *id
    )
{
	int chipId = 0;
	WMT_DETECT_INFO_FUNC("vendor(0x%x) device(0x%x) num(0x%x)\n", func->vendor, func->device, func->num);
	chipId = hif_sdio_match_chipid_by_dev_id(id);
	
	if ((0x6630 == chipId) && (1 == func->num))
	{
		int ret = 0;
		g_func = func;
		WMT_DETECT_INFO_FUNC("autok function detected, func:0x%p\n", g_func);
		
		sdio_claim_host(func);
    ret = sdio_enable_func(func);
    sdio_release_host(func);
    if (ret) {
        WMT_DETECT_ERR_FUNC("sdio_enable_func failed!\n");
    }
	}
	
	return 0;
}

开发者ID:Sector1369，项目名称:acer_v370_kk，代码行数:37，代码来源:sdio_detect.c

示例3: sdioh_sdmmc_card_enablefuncs

static int sdioh_sdmmc_card_enablefuncs(sdioh_info_t *sd)
{
	int err_ret;
	uint32 fbraddr;
	uint8 func;

	/* Get the Card's common CIS address */
	sd->com_cis_ptr = sdioh_sdmmc_get_cisaddr(sd, SDIO_CCCR_CIS);
	sd->func_cis_ptr[0] = sd->com_cis_ptr;//901=0x00001070

	/* Get the Card's function CIS (for each function) */
	for (fbraddr = SDIOD_FBR_STARTADDR, func = 1; 
	     func <= sd->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) 
	{
		sd->func_cis_ptr[func] = sdioh_sdmmc_get_cisaddr(sd, SDIOD_FBR_CISPTR_0 + fbraddr);
		//printf("func_cis_ptr[%d]=0x%08x\n", func, sd->func_cis_ptr[func]);
		//901 func_cis_ptr[1]=0x00001000
		//901 func_cis_ptr[2]=0x00001038
	}

	/* Enable Function 1 */
	err_ret = sdio_enable_func(gInstance->func[1]);
	if (err_ret) 
	{
		BCMDEBUG("bcmsdh_sdmmc: Failed to enable F1 Err: 0x%08x", err_ret);
	}

	return FALSE;
}

开发者ID:imaginegit，项目名称:wifisdk，代码行数:29，代码来源:bcmsdh_sdmmc.c

示例4: wl12xx_sdio_power_on

static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
{
	int ret;
	struct sdio_func *func = dev_to_sdio_func(glue->dev);
	struct mmc_card *card = func->card;

	ret = pm_runtime_get_sync(&card->dev);
	if (ret < 0) {
		pm_runtime_put_noidle(&card->dev);
		dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
			__func__, ret);

		return ret;
	}

	sdio_claim_host(func);
	/*
	 * To guarantee that the SDIO card is power cycled, as required to make
	 * the FW programming to succeed, let's do a brute force HW reset.
	 */
	mmc_hw_reset(card->host);

	sdio_enable_func(func);
	sdio_release_host(func);

	return 0;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:27，代码来源:sdio.c

示例5: esdio_power_on

static int esdio_power_on(struct esp_sdio_ctrl *sctrl)
{
        int err = 0;

        if (sctrl->off == false)
                return err;

        sdio_claim_host(sctrl->func);
        err = sdio_enable_func(sctrl->func);

        if (err) {
                esp_dbg(ESP_DBG_ERROR, "Unable to enable sdio func: %d\n", err);
                sdio_release_host(sctrl->func);
                return err;
        }

        sdio_release_host(sctrl->func);

        /* ensure device is up */
        msleep(5);

        sctrl->off = false;

        return err;
}

开发者ID:Icenowy，项目名称:esp8089，代码行数:25，代码来源:sdio_sif_esp.c

示例6: woal_sdio_probe

/**  @brief This function handles client driver probe.
 *
 *  @param func     A pointer to sdio_func structure.
 *  @param id       A pointer to sdio_device_id structure.
 *  @return         MLAN_STATUS_SUCCESS or MLAN_STATUS_FAILURE/error code
 */
int
woal_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
{
	int ret = MLAN_STATUS_SUCCESS;
	struct sdio_mmc_card *card = NULL;

	ENTER();

	PRINTM(MMSG, "vendor=0x%4.04X device=0x%4.04X class=%d function=%d\n",
	       func->vendor, func->device, func->class, func->num);

	card = kzalloc(sizeof(struct sdio_mmc_card), GFP_KERNEL);
	if (!card) {
		PRINTM(MFATAL,
		       "Failed to allocate memory in probe function!\n");
		LEAVE();
		return -ENOMEM;
	}

	card->func = func;

#ifdef MMC_QUIRK_BLKSZ_FOR_BYTE_MODE
	/* The byte mode patch is available in kernel MMC driver which fixes
	   one issue in MP-A transfer. bit1: use func->cur_blksize for byte
	   mode */
	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
#endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(3, 0, 0)
    func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
#endif

#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
	/* wait for chip fully wake up */
	if (!func->enable_timeout)
		func->enable_timeout = 200;
#endif
	sdio_claim_host(func);
	ret = sdio_enable_func(func);
	if (ret) {
		sdio_disable_func(func);
		sdio_release_host(func);
		kfree(card);
		PRINTM(MFATAL, "sdio_enable_func() failed: ret=%d\n", ret);
		LEAVE();
		return -EIO;
	}
	sdio_release_host(func);
	if (NULL == woal_add_card(card)) {
		PRINTM(MERROR, "woal_add_card failed\n");
		kfree(card);
		sdio_claim_host(func);
		sdio_disable_func(func);
		sdio_release_host(func);
		ret = MLAN_STATUS_FAILURE;
	}

	LEAVE();
	return ret;
}

开发者ID:krysanto，项目名称:steamlink-sdk，代码行数:66，代码来源:moal_sdio_mmc.c

示例7: wl1271_sdio_set_power

static int wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{
	struct sdio_func *func = wl_to_func(wl);
	int ret;

	/* Let the SDIO stack handle wlan_enable control, so we
	 * keep host claimed while wlan is in use to keep wl1271
	 * alive.
	 */
	if (enable) {
		/* Power up the card */
		ret = pm_runtime_get_sync(&func->dev);
		if (ret < 0)
			goto out;
		sdio_claim_host(func);
		sdio_enable_func(func);
		sdio_release_host(func);
	} else {
		sdio_claim_host(func);
		sdio_disable_func(func);
		sdio_release_host(func);

		/* Power down the card */
		ret = pm_runtime_put_sync(&func->dev);
	}

out:
	return ret;
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:29，代码来源:sdio_test.c

示例8: cw1200_sdio_probe

/* Probe Function to be called by SDIO stack when device is discovered */
static int cw1200_sdio_probe(struct sdio_func *func,
			      const struct sdio_device_id *id)
{
	struct sbus_priv *self;
	int status;

	cw1200_dbg(CW1200_DBG_INIT, "Probe called\n");

	self = kzalloc(sizeof(*self), GFP_KERNEL);
	if (!self) {
		cw1200_dbg(CW1200_DBG_ERROR, "Can't allocate SDIO sbus_priv.");
		return -ENOMEM;
	}

	spin_lock_init(&self->lock);
	self->pdata = cw1200_get_platform_data();
	self->func = func;
	sdio_set_drvdata(func, self);
	sdio_claim_host(func);
	sdio_enable_func(func);
	sdio_release_host(func);

	status = cw1200_probe(&cw1200_sdio_sbus_ops,
			      self, &func->dev, &self->core);
	if (status) {
		sdio_claim_host(func);
		sdio_disable_func(func);
		sdio_release_host(func);
		sdio_set_drvdata(func, NULL);
		kfree(self);
	}

	return status;
}

开发者ID:791254467，项目名称:u8500_kernel，代码行数:35，代码来源:cw1200_sdio.c

示例9: wl1271_sdio_power_on

static int wl1271_sdio_power_on(struct wl1271 *wl)
{
	struct sdio_func *func = wl_to_func(wl);
	int ret;
	/* If enabled, tell runtime PM not to power off the card */
	if (pm_runtime_enabled(&func->dev)) {
		ret = pm_runtime_get_sync(&func->dev);
		if (ret) {
printk (KERN_ERR "%s:pm_runtime_get_sync: %d\n", __func__, ret );
			goto out;
		}
	} else {
		/* Runtime PM is disabled: power up the card manually */
		ret = mmc_power_restore_host(func->card->host);
		if (ret < 0) {
printk (KERN_ERR "%s:mmc_power_restore_host: %d\n", __func__, ret );
			goto out;
		}
	}

	sdio_claim_host(func);
	sdio_enable_func(func);

out:
	return ret;
}

开发者ID:sjardine1，项目名称:compat-wireless-2011-08-08，代码行数:26，代码来源:sdio.c

示例10: wl12xx_sdio_power_on

static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
{
	int ret;
	struct sdio_func *func = dev_to_sdio_func(glue->dev);
	struct mmc_card *card = func->card;

	ret = pm_runtime_get_sync(&card->dev);
	if (ret) {
		/*
		 * Runtime PM might be temporarily disabled, or the device
		 * might have a positive reference counter. Make sure it is
		 * really powered on.
		 */
		ret = mmc_power_restore_host(card->host);
		if (ret < 0) {
			pm_runtime_put_sync(&card->dev);
			goto out;
		}
	}

	sdio_claim_host(func);
	sdio_enable_func(func);
	sdio_release_host(func);

out:
	return ret;
}

开发者ID:383530895，项目名称:linux，代码行数:27，代码来源:sdio.c

示例11: emapi_sdio_probe

static int emapi_sdio_probe(struct sdio_func *func, const struct sdio_device_id *id)
{
   	int rc;

	emapi_setfunc(NULL);

	printk("emapi router - class 0x%x, Vendor 0x%x, Device 0x%x\n",
	      	func->class, func->vendor, func->device);

	if (func->vendor != VENDOR_ID || func->device != DEVICE_ID)
	   	return -ENODEV;

	sdio_claim_host(func);
	rc = sdio_enable_func(func);
	if (rc)
	   	goto sdio_err1;

	rc = sdio_claim_irq(func, emapi_sdio_irq);
	if (rc)
	   	goto sdio_err2;

	rc = sdio_set_block_size(func, 512); 
	if (rc)
	   	goto sdio_err2;

	emapi_setfunc(func);

	return 0;

sdio_err2:
	sdio_disable_func(func);
sdio_err1:
	sdio_release_host(func);
	return rc;
}

开发者ID:Soaa-，项目名称:-lightspeed，代码行数:35，代码来源:sdio_emapi.c

示例12: mtk_sdio_probe

static int mtk_sdio_probe (
    struct sdio_func *func,
    const struct sdio_device_id *id
    )
{
    int ret = 0;
    int i = 0;

    //printk(KERN_INFO DRV_NAME "mtk_sdio_probe()\n");

    ASSERT(func);
    ASSERT(id);

    //printk(KERN_INFO DRV_NAME "Basic struct size checking...\n");
    //printk(KERN_INFO DRV_NAME "sizeof(struct device) = %d\n", sizeof(struct device));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_host) = %d\n", sizeof(struct mmc_host));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_card) = %d\n", sizeof(struct mmc_card));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_driver) = %d\n", sizeof(struct mmc_driver));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_data) = %d\n", sizeof(struct mmc_data));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_command) = %d\n", sizeof(struct mmc_command));
    //printk(KERN_INFO DRV_NAME "sizeof(struct mmc_request) = %d\n", sizeof(struct mmc_request));
    //printk(KERN_INFO DRV_NAME "sizeof(struct sdio_func) = %d\n", sizeof(struct sdio_func));

    //printk(KERN_INFO DRV_NAME "Card information checking...\n");
    //printk(KERN_INFO DRV_NAME "func = 0x%p\n", func);
    //printk(KERN_INFO DRV_NAME "Number of info = %d:\n", func->card->num_info);

    for (i = 0; i < func->card->num_info; i++) {
        //printk(KERN_INFO DRV_NAME "info[%d]: %s\n", i, func->card->info[i]);
    }

    sdio_claim_host(func);
    ret = sdio_enable_func(func);
    sdio_release_host(func);

    if (ret) {
        //printk(KERN_INFO DRV_NAME"sdio_enable_func failed!\n");
        goto out;
    }
    //printk(KERN_INFO DRV_NAME"sdio_enable_func done!\n");

    if (pfWlanProbe((PVOID)func) != WLAN_STATUS_SUCCESS) {
        //printk(KERN_WARNING DRV_NAME"pfWlanProbe fail!call pfWlanRemove()\n");
        pfWlanRemove();
        ret = -1;
    }
    else {
#if CFG_DBG_GPIO_PINS
    //printk(KERN_INFO "[%s] init debug gpio, 20100815 \n", __FUNCTION__);
    /* Debug pins initialization */
    debug_gpio_init();
#endif
    }

out:
    //printk(KERN_INFO DRV_NAME"mtk_sdio_probe() done(%d)\n", ret);
    return ret;
}

开发者ID:Dee-UK，项目名称:RK3188_KK_4.4.02_Beta，代码行数:58，代码来源:sdio.c

示例13: sdioDrv_EnableFunction

int sdioDrv_EnableFunction(unsigned int uFunc)
{
	PDEBUG("%s: func %d\n", __func__, uFunc);

	/* currently only wlan sdio function is supported */
	BUG_ON(uFunc != SDIO_WLAN_FUNC);
	BUG_ON(tiwlan_func[uFunc] == NULL);
	
	return sdio_enable_func(tiwlan_func[uFunc]);
}

开发者ID:MindShow，项目名称:amlogic_s905_kernel_merges，代码行数:10，代码来源:SdioDrv.c

示例14: wlan_setup

int wlan_setup()
{
	int ret;

	scratch_reg = 0x34;

	ret = sdio_enable_func(1);
	if(ret)
	{
		bufferPrintf("wlan: cannot enable function\r\n");
		return -1;
	}

	ret = sdio_claim_irq(1, wlan_interrupt, 0);
	if(ret)
	{
		bufferPrintf("wlan: cannot claim irq\r\n");
		return -1;
	}

	ioport = sdio_readb(1, 0x0, &ret);
	if(ret)
	{
		bufferPrintf("wlan: cannot read ioport\r\n");
		return -1;
	}

	ioport |= sdio_readb(1, 0x1, &ret) << 8;
	if(ret)
	{
		bufferPrintf("wlan: cannot read ioport\r\n");
		return -1;
	}


	ioport |= sdio_readb(1, 0x2, &ret) << 16;
	if(ret)
	{
		bufferPrintf("wlan: cannot read ioport\r\n");
		return -1;
	}

	bufferPrintf("wlan: ioport = 0x%x\r\n", ioport);

	uint16_t scratch = wlan_read_scratch(&ret);
	if(ret)
	{
		bufferPrintf("wlan: cannot read scratch register\r\n");
		return -1;
	}

	bufferPrintf("wlan: firmware status = 0x%x\r\n", scratch);

	return 0;
}

开发者ID:Anon0，项目名称:openiBoot，代码行数:55，代码来源:wlan.c

示例15: brcmf_sdioh_f0_write_byte

static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
					    uint regaddr, u8 *byte)
{
	struct sdio_func *sdfunc = sdiodev->func[0];
	int err_ret;

	/*
	 * Can only directly write to some F0 registers.
	 * Handle F2 enable/disable and Abort command
	 * as a special case.
	 */
	if (regaddr == SDIO_CCCR_IOEx) {
		sdfunc = sdiodev->func[2];
		if (sdfunc) {
			sdio_claim_host(sdfunc);
			if (*byte & SDIO_FUNC_ENABLE_2) {
				/* Enable Function 2 */
				err_ret = sdio_enable_func(sdfunc);
				if (err_ret)
					brcmf_dbg(ERROR,
						  "enable F2 failed:%d\n",
						  err_ret);
			} else {
				/* Disable Function 2 */
				err_ret = sdio_disable_func(sdfunc);
				if (err_ret)
					brcmf_dbg(ERROR,
						  "Disable F2 failed:%d\n",
						  err_ret);
			}
			sdio_release_host(sdfunc);
		}
	} else if ((regaddr == SDIO_CCCR_ABORT) ||
		   (regaddr == SDIO_CCCR_IENx)) {
		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
				 GFP_KERNEL);
		if (!sdfunc)
			return -ENOMEM;
		sdfunc->num = 0;
		sdio_claim_host(sdfunc);
		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
		sdio_release_host(sdfunc);
		kfree(sdfunc);
	} else if (regaddr < 0xF0) {
		brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr);
		err_ret = -EPERM;
	} else {
		sdio_claim_host(sdfunc);
		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
		sdio_release_host(sdfunc);
	}

	return err_ret;
}

开发者ID:nannaniel，项目名称:linux-2.6.35.3-imx28，代码行数:54，代码来源:bcmsdh_sdmmc.c

示例16: i2400ms_enable_function

/*
 * Enable the SDIO function
 *
 * Tries to enable the SDIO function; might fail if it is still not
 * ready (in some hardware, the SDIO WiMAX function is only enabled
 * when we ask it to explicitly doing). Tries until a timeout is
 * reached.
 *
 * The @maxtries argument indicates how many times (at most) it should
 * be tried to enable the function. 0 means forever. This acts along
 * with the timeout (ie: it'll stop trying as soon as the maximum
 * number of tries is reached _or_ as soon as the timeout is reached).
 *
 * The reverse of this is...sdio_disable_function()
 *
 * Returns: 0 if the SDIO function was enabled, < 0 errno code on
 *     error (-ENODEV when it was unable to enable the function).
 */
static
int i2400ms_enable_function(struct i2400ms *i2400ms, unsigned maxtries)
{
	struct sdio_func *func = i2400ms->func;
	u64 timeout;
	int err;
	struct device *dev = &func->dev;
	unsigned tries = 0;

	d_fnstart(3, dev, "(func %p)\n", func);
	/* Setup timeout (FIXME: This needs to read the CIS table to
	 * get a real timeout) and then wait for the device to signal
	 * it is ready */
	timeout = get_jiffies_64() + ioe_timeout * HZ;
	err = -ENODEV;
	while (err != 0 && time_before64(get_jiffies_64(), timeout)) {
		sdio_claim_host(func);
		/*
		 * There is a sillicon bug on the IWMC3200, where the
		 * IOE timeout will cause problems on Moorestown
		 * platforms (system hang). We explicitly overwrite
		 * func->enable_timeout here to work around the issue.
		 */
		if (i2400ms->iwmc3200)
			func->enable_timeout = IWMC3200_IOR_TIMEOUT;
		err = sdio_enable_func(func);
		if (0 == err) {
			sdio_release_host(func);
			d_printf(2, dev, "SDIO function enabled\n");
			goto function_enabled;
		}
		d_printf(2, dev, "SDIO function failed to enable: %d\n", err);
		sdio_release_host(func);
		if (maxtries > 0 && ++tries >= maxtries) {
			err = -ETIME;
			break;
		}
		msleep(I2400MS_INIT_SLEEP_INTERVAL);
	}
	/* If timed out, device is not there yet -- get -ENODEV so
	 * the device driver core will retry later on. */
	if (err == -ETIME) {
		dev_err(dev, "Can't enable WiMAX function; "
			" has the function been enabled?\n");
		err = -ENODEV;
	}
function_enabled:
	d_fnend(3, dev, "(func %p) = %d\n", func, err);
	return err;
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:68，代码来源:sdio.c

示例17: brcmf_sdioh_f0_write_byte

static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev,
					    uint regaddr, u8 *byte)
{
	struct sdio_func *sdfunc = sdiodev->func[0];
	int err_ret;

	if (regaddr == SDIO_CCCR_IOEx) {
		sdfunc = sdiodev->func[2];
		if (sdfunc) {
			sdio_claim_host(sdfunc);
			if (*byte & SDIO_FUNC_ENABLE_2) {
				
				err_ret = sdio_enable_func(sdfunc);
				if (err_ret)
					brcmf_dbg(ERROR,
						  "enable F2 failed:%d\n",
						  err_ret);
			} else {
				
				err_ret = sdio_disable_func(sdfunc);
				if (err_ret)
					brcmf_dbg(ERROR,
						  "Disable F2 failed:%d\n",
						  err_ret);
			}
			sdio_release_host(sdfunc);
		}
	} else if (regaddr == SDIO_CCCR_ABORT) {
		sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func),
				 GFP_KERNEL);
		if (!sdfunc)
			return -ENOMEM;
		sdfunc->num = 0;
		sdio_claim_host(sdfunc);
		sdio_writeb(sdfunc, *byte, regaddr, &err_ret);
		sdio_release_host(sdfunc);
		kfree(sdfunc);
	} else if (regaddr < 0xF0) {
		brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr);
		err_ret = -EPERM;
	} else {
		sdio_claim_host(sdfunc);
		sdio_f0_writeb(sdfunc, *byte, regaddr, &err_ret);
		sdio_release_host(sdfunc);
	}

	return err_ret;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:48，代码来源:bcmsdh_sdmmc.c

示例18: wl1271_sdio_set_power

static void wl1271_sdio_set_power(struct wl1271 *wl, bool enable)
{
	struct sdio_func *func = wl_to_func(wl);

	/* Let the SDIO stack handle wlan_enable control, so we
	 * keep host claimed while wlan is in use to keep wl1271
	 * alive.
	 */
	if (enable) {
		sdio_claim_host(func);
		sdio_enable_func(func);
	} else {
		sdio_disable_func(func);
		sdio_release_host(func);
	}
}

开发者ID:12rafael，项目名称:jellytimekernel，代码行数:16，代码来源:wl1271_sdio.c

示例19: wl1271_sdio_power_on

static int wl1271_sdio_power_on(struct wl1271 *wl)
{
	struct sdio_func *func = wl_to_func(wl);
	int ret;

	/* Power up the card */
	ret = pm_runtime_get_sync(&func->dev);
	if (ret < 0)
		goto out;

	sdio_claim_host(func);
	sdio_enable_func(func);
	sdio_release_host(func);

out:
	return ret;
}

开发者ID:ANFS，项目名称:ANFS-kernel，代码行数:17，代码来源:sdio.c

示例20: wl1251_sdio_set_power

static int wl1251_sdio_set_power(struct wl1251 *wl, bool enable)
{
	int ret = 0;
	struct sdio_func *func = wl_to_func(wl);

	wl1251_enter();
	if (enable) {
		if (wl->set_power)
			wl->set_power(true);

		ret = mmc_power_restore_host(func->card->host);
		if (ret) {
			wl1251_error("failed to restore host power");
			goto out;
		}

		wl1251_debug(DEBUG_PSM, "sdio_claim_host");
		sdio_claim_host(func);
		wl1251_debug(DEBUG_PSM, "sdio_enable_func");
		sdio_enable_func(func);
		wl1251_debug(DEBUG_PSM, "sdio_release_host");
		sdio_release_host(func);
		wl1251_debug(DEBUG_PSM, "sdio_done");
	} else {
		wl1251_debug(DEBUG_PSM, "sdio_claim_host");
		sdio_claim_host(func);
		wl1251_debug(DEBUG_PSM, "sdio_disable_func");
		sdio_disable_func(func);
		wl1251_debug(DEBUG_PSM, "sdio_release_host");
		sdio_release_host(func);
		wl1251_debug(DEBUG_PSM, "power_save_host");
		ret = mmc_power_save_host(func->card->host);
		if (ret) {
			wl1251_error("failed to disable host power");
			goto out;
		}
		wl1251_debug(DEBUG_PSM, "power_save done");

		if (wl->set_power)
			wl->set_power(false);
	}

out:
	wl1251_leave();
	return ret;
}

开发者ID:milaq，项目名称:android_kernel_htc_kovsky，代码行数:46，代码来源:wl1251_sdio.c

注：本文中的sdio_enable_func函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ sdio_func_id函数代码示例发布时间：2022-05-30

C++ sdio_claim_host函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19162|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ sdio_enable_func函数代码示例

示例1: brcmf_sdioh_enablefuncs

示例2: sdio_detect_probe

示例3: sdioh_sdmmc_card_enablefuncs

示例4: wl12xx_sdio_power_on

示例5: esdio_power_on

示例6: woal_sdio_probe

示例7: wl1271_sdio_set_power

示例8: cw1200_sdio_probe

示例9: wl1271_sdio_power_on

示例10: wl12xx_sdio_power_on

示例11: emapi_sdio_probe

示例12: mtk_sdio_probe

示例13: sdioDrv_EnableFunction

示例14: wlan_setup

示例15: brcmf_sdioh_f0_write_byte

示例16: i2400ms_enable_function

示例17: brcmf_sdioh_f0_write_byte

示例18: wl1271_sdio_set_power

示例19: wl1271_sdio_power_on

示例20: wl1251_sdio_set_power

请发表评论

全部评论

上一篇：

下一篇：

bradtraversy/iweather: Ionic 3 mobile we

joaomh/curso-de-matlab

断牙刷新位置时间（断牙属性及刷新位置介绍

MATLAB下一些常用易忘命令

rugk/mastodon-simplified-federation: Sim

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053