C++ scsi_scan_host函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中scsi_scan_host函数的典型用法代码示例。如果您正苦于以下问题：C++ scsi_scan_host函数的具体用法？C++ scsi_scan_host怎么用？C++ scsi_scan_host使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了scsi_scan_host函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtsx_scan_thread

/* Thread to carry out delayed SCSI-device scanning */
static int rtsx_scan_thread(void *__dev)
{
	struct rtsx_dev *dev = __dev;
	struct rtsx_chip *chip = dev->chip;

	/* Wait for the timeout to expire or for a disconnect */
	if (delay_use > 0) {
		dev_info(&dev->pci->dev,
			 "%s: waiting for device to settle before scanning\n",
			 CR_DRIVER_NAME);
		wait_event_interruptible_timeout(dev->delay_wait,
				rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT),
				delay_use * HZ);
	}

	/* If the device is still connected, perform the scanning */
	if (!rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
		scsi_scan_host(rtsx_to_host(dev));
		dev_info(&dev->pci->dev, "%s: device scan complete\n",
			 CR_DRIVER_NAME);

		/* Should we unbind if no devices were detected? */
	}

	complete_and_exit(&dev->scanning_done, 0);
}

开发者ID:acton393，项目名称:linux，代码行数:27，代码来源:rtsx.c

示例2: rtsx_scan_thread

static int rtsx_scan_thread(void * __dev)
{
	struct rtsx_dev *dev = (struct rtsx_dev *)__dev;
	struct rtsx_chip *chip = dev->chip;

	
	if (delay_use > 0) {
		printk(KERN_INFO "%s: waiting for device "
				"to settle before scanning\n", CR_DRIVER_NAME);
		wait_event_interruptible_timeout(dev->delay_wait,
				rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT),
				delay_use * HZ);
	}

	
	if (!rtsx_chk_stat(chip, RTSX_STAT_DISCONNECT)) {
		scsi_scan_host(rtsx_to_host(dev));
		printk(KERN_INFO "%s: device scan complete\n", CR_DRIVER_NAME);

		
	}

	scsi_host_put(rtsx_to_host(dev));
	complete_and_exit(&threads_gone, 0);
}

开发者ID:uran1980，项目名称:RTS5209-linux-driver，代码行数:25，代码来源:rtsx.c

示例3: rts51x_scan_thread

static int rts51x_scan_thread(void *__chip)
{
	struct rts51x_chip *chip = (struct rts51x_chip *)__chip;

	printk(KERN_DEBUG
	       "rts51x: device found at %d\n", chip->usb->pusb_dev->devnum);

	set_freezable();
	
	if (delay_use > 0) {
		printk(KERN_DEBUG "rts51x: waiting for device "
		       "to settle before scanning\n");
		wait_event_freezable_timeout(chip->usb->delay_wait,
					     test_bit(FLIDX_DONT_SCAN,
						      &chip->usb->dflags),
					     delay_use * HZ);
	}

	
	if (!test_bit(FLIDX_DONT_SCAN, &chip->usb->dflags)) {
		scsi_scan_host(rts51x_to_host(chip));
		printk(KERN_DEBUG "rts51x: device scan complete\n");

		
	}

	complete_and_exit(&chip->usb->scanning_done, 0);
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:28，代码来源:rts51x.c

示例4: a2091_probe

static int __devinit a2091_probe(struct zorro_dev *z,
				 const struct zorro_device_id *ent)
{
	struct Scsi_Host *instance;
	int error;
	struct a2091_scsiregs *regs;
	wd33c93_regs wdregs;
	struct a2091_hostdata *hdata;

	if (!request_mem_region(z->resource.start, 256, "wd33c93"))
		return -EBUSY;

	instance = scsi_host_alloc(&a2091_scsi_template,
				   sizeof(struct a2091_hostdata));
	if (!instance) {
		error = -ENOMEM;
		goto fail_alloc;
	}

	instance->irq = IRQ_AMIGA_PORTS;
	instance->unique_id = z->slotaddr;

	regs = (struct a2091_scsiregs *)ZTWO_VADDR(z->resource.start);
	regs->DAWR = DAWR_A2091;

	wdregs.SASR = &regs->SASR;
	wdregs.SCMD = &regs->SCMD;

	hdata = shost_priv(instance);
	hdata->wh.no_sync = 0xff;
	hdata->wh.fast = 0;
	hdata->wh.dma_mode = CTRL_DMA;
	hdata->regs = regs;

	wd33c93_init(instance, wdregs, dma_setup, dma_stop, WD33C93_FS_8_10);
	error = request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED,
			    "A2091 SCSI", instance);
	if (error)
		goto fail_irq;

	regs->CNTR = CNTR_PDMD | CNTR_INTEN;

	error = scsi_add_host(instance, NULL);
	if (error)
		goto fail_host;

	zorro_set_drvdata(z, instance);

	scsi_scan_host(instance);
	return 0;

fail_host:
	free_irq(IRQ_AMIGA_PORTS, instance);
fail_irq:
	scsi_host_put(instance);
fail_alloc:
	release_mem_region(z->resource.start, 256);
	return error;
}

开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:59，代码来源:a2091.c

示例5: mvme147_init

static int __init mvme147_init(void)
{
	wd33c93_regs regs;
	struct WD33C93_hostdata *hdata;
	int error = -ENOMEM;

	if (!MACH_IS_MVME147)
		return 0;

	mvme147_shost = scsi_host_alloc(&mvme147_host_template,
			sizeof(struct WD33C93_hostdata));
	if (!mvme147_shost)
		goto err_out;
	mvme147_shost->base = 0xfffe4000;
	mvme147_shost->irq = MVME147_IRQ_SCSI_PORT;

	regs.SASR = (volatile unsigned char *)0xfffe4000;
	regs.SCMD = (volatile unsigned char *)0xfffe4001;

	hdata = shost_priv(mvme147_shost);
	hdata->no_sync = 0xff;
	hdata->fast = 0;
	hdata->dma_mode = CTRL_DMA;

	wd33c93_init(mvme147_shost, regs, dma_setup, dma_stop, WD33C93_FS_8_10);

	error = request_irq(MVME147_IRQ_SCSI_PORT, mvme147_intr, 0,
			"MVME147 SCSI PORT", mvme147_shost);
	if (error)
		goto err_unregister;
	error = request_irq(MVME147_IRQ_SCSI_DMA, mvme147_intr, 0,
			"MVME147 SCSI DMA", mvme147_shost);
	if (error)
		goto err_free_irq;
#if 0	/* Disabled; causes problems booting */
	m147_pcc->scsi_interrupt = 0x10;	/* Assert SCSI bus reset */
	udelay(100);
	m147_pcc->scsi_interrupt = 0x00;	/* Negate SCSI bus reset */
	udelay(2000);
	m147_pcc->scsi_interrupt = 0x40;	/* Clear bus reset interrupt */
#endif
	m147_pcc->scsi_interrupt = 0x09;	/* Enable interrupt */

	m147_pcc->dma_cntrl = 0x00;	/* ensure DMA is stopped */
	m147_pcc->dma_intr = 0x89;	/* Ack and enable ints */

	error = scsi_add_host(mvme147_shost, NULL);
	if (error)
		goto err_free_irq;
	scsi_scan_host(mvme147_shost);
	return 0;

err_free_irq:
	free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
err_unregister:
	scsi_host_put(mvme147_shost);
err_out:
	return error;
}

开发者ID:AlexShiLucky，项目名称:linux，代码行数:59，代码来源:mvme147.c

示例6: a4000t_probe

static int __devinit a4000t_probe(struct device *dev)
{
	struct Scsi_Host * host = NULL;
	struct NCR_700_Host_Parameters *hostdata;

	if (!(MACH_IS_AMIGA && AMIGAHW_PRESENT(A4000_SCSI)))
		goto out;

	if (!request_mem_region(A4000T_SCSI_ADDR, 0x1000,
				"A4000T builtin SCSI"))
		goto out;

	hostdata = kmalloc(sizeof(struct NCR_700_Host_Parameters), GFP_KERNEL);
	if (hostdata == NULL) {
		printk(KERN_ERR "a4000t-scsi: Failed to allocate host data\n");
		goto out_release;
	}
	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

	/* Fill in the required pieces of hostdata */
	hostdata->base = (void __iomem *)ZTWO_VADDR(A4000T_SCSI_ADDR);
	hostdata->clock = 50;
	hostdata->chip710 = 1;
	hostdata->dmode_extra = DMODE_FC2;
	hostdata->dcntl_extra = EA_710;

	/* and register the chip */
	host = NCR_700_detect(&a4000t_scsi_driver_template, hostdata, dev);
	if (!host) {
		printk(KERN_ERR "a4000t-scsi: No host detected; "
				"board configuration problem?\n");
		goto out_free;
	}

	host->this_id = 7;
	host->base = A4000T_SCSI_ADDR;
	host->irq = IRQ_AMIGA_PORTS;

	if (request_irq(host->irq, NCR_700_intr, IRQF_SHARED, "a4000t-scsi",
			host)) {
		printk(KERN_ERR "a4000t-scsi: request_irq failed\n");
		goto out_put_host;
	}

	dev_set_drvdata(dev, host);
	scsi_scan_host(host);

	return 0;

 out_put_host:
	scsi_host_put(host);
 out_free:
	kfree(hostdata);
 out_release:
	release_mem_region(A4000T_SCSI_ADDR, 0x1000);
 out:
	return -ENODEV;
}

开发者ID:cilynx，项目名称:dd-wrt，代码行数:58，代码来源:a4000t.c

示例7: sim710_probe_common

static __devinit int
sim710_probe_common(struct device *dev, unsigned long base_addr,
		    int irq, int clock, int differential, int scsi_id)
{
	struct Scsi_Host * host = NULL;
	struct NCR_700_Host_Parameters *hostdata =
		kzalloc(sizeof(struct NCR_700_Host_Parameters),	GFP_KERNEL);

;
//	printk(KERN_NOTICE "sim710: irq = %d, clock = %d, base = 0x%lx, scsi_id = %d\n",
;

	if(hostdata == NULL) {
;
		goto out;
	}

	if(request_region(base_addr, 64, "sim710") == NULL) {
//		printk(KERN_ERR "sim710: Failed to reserve IO region 0x%lx\n",
;
		goto out_free;
	}

	/* Fill in the three required pieces of hostdata */
	hostdata->base = ioport_map(base_addr, 64);
	hostdata->differential = differential;
	hostdata->clock = clock;
	hostdata->chip710 = 1;
	hostdata->burst_length = 8;

	/* and register the chip */
	if((host = NCR_700_detect(&sim710_driver_template, hostdata, dev))
	   == NULL) {
;
		goto out_release;
	}
	host->this_id = scsi_id;
	host->base = base_addr;
	host->irq = irq;
	if (request_irq(irq, NCR_700_intr, IRQF_SHARED, "sim710", host)) {
;
		goto out_put_host;
	}

	dev_set_drvdata(dev, host);
	scsi_scan_host(host);

	return 0;

 out_put_host:
	scsi_host_put(host);
 out_release:
	release_region(base_addr, 64);
 out_free:
	kfree(hostdata);
 out:
	return -ENODEV;
}

开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:58，代码来源:sim710.c

示例8: dmx3191d_probe_one

static int dmx3191d_probe_one(struct pci_dev *pdev,
			      const struct pci_device_id *id)
{
	struct Scsi_Host *shost;
	struct NCR5380_hostdata *hostdata;
	unsigned long io;
	int error = -ENODEV;

	if (pci_enable_device(pdev))
		goto out;

	io = pci_resource_start(pdev, 0);
	if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
		printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
				io, io + DMX3191D_REGION_LEN);
		goto out_disable_device;
	}

	shost = scsi_host_alloc(&dmx3191d_driver_template,
			sizeof(struct NCR5380_hostdata));
	if (!shost)
		goto out_release_region;       

	hostdata = shost_priv(shost);
	hostdata->base = io;

	/* This card does not seem to raise an interrupt on pdev->irq.
	 * Steam-powered SCSI controllers run without an IRQ anyway.
	 */
	shost->irq = NO_IRQ;

	error = NCR5380_init(shost, 0);
	if (error)
		goto out_host_put;

	NCR5380_maybe_reset_bus(shost);

	pci_set_drvdata(pdev, shost);

	error = scsi_add_host(shost, &pdev->dev);
	if (error)
		goto out_exit;

	scsi_scan_host(shost);
	return 0;

out_exit:
	NCR5380_exit(shost);
out_host_put:
	scsi_host_put(shost);
 out_release_region:
	release_region(io, DMX3191D_REGION_LEN);
 out_disable_device:
	pci_disable_device(pdev);
 out:
	return error;
}

开发者ID:Announcement，项目名称:linux，代码行数:57，代码来源:dmx3191d.c

示例9: cumanascsi1_probe

static int __devinit
cumanascsi1_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	host = scsi_host_alloc(&cumanascsi_template, sizeof(struct NCR5380_hostdata));
	if (!host)
		goto out;

        host->io_port = ecard_address(ec, ECARD_IOC, ECARD_SLOW) + 0x800;
	host->irq = ec->irq;

	NCR5380_init(host, 0);

	host->n_io_port = 255;
	if (!(request_region(host->io_port, host->n_io_port, "CumanaSCSI-1"))) {
		ret = -EBUSY;
		goto out_free;
	}

        ((struct NCR5380_hostdata *)host->hostdata)->ctrl = 0;
        outb(0x00, host->io_port - 577);

	ret = request_irq(host->irq, cumanascsi_intr, SA_INTERRUPT,
			  "CumanaSCSI-1", host);
	if (ret) {
		printk("scsi%d: IRQ%d not free: %d\n",
		    host->host_no, host->irq, ret);
		goto out_release;
	}

	printk("scsi%d: at port 0x%08lx irq %d",
		host->host_no, host->io_port, host->irq);
	printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_free_irq;

	scsi_scan_host(host);
	goto out;

 out_free_irq:
	free_irq(host->irq, host);
 out_release:
	release_region(host->io_port, host->n_io_port);
 out_free:
	scsi_host_put(host);
 out:
	return ret;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:56，代码来源:cumana_1.c

示例10: qlogicfas408_get_chip_type

static struct Scsi_Host *qlogic_detect(struct scsi_host_template *host,
				struct pcmcia_device *link, int qbase, int qlirq)
{
	int qltyp;		/* type of chip */
	int qinitid;
	struct Scsi_Host *shost;	/* registered host structure */
	struct qlogicfas408_priv *priv;

	qltyp = qlogicfas408_get_chip_type(qbase, INT_TYPE);
	qinitid = host->this_id;
	if (qinitid < 0)
		qinitid = 7;	/* if no ID, use 7 */

	qlogicfas408_setup(qbase, qinitid, INT_TYPE);

	host->name = qlogic_name;
	shost = scsi_host_alloc(host, sizeof(struct qlogicfas408_priv));
	if (!shost)
		goto err;
	shost->io_port = qbase;
	shost->n_io_port = 16;
	shost->dma_channel = -1;
	if (qlirq != -1)
		shost->irq = qlirq;

	priv = get_priv_by_host(shost);
	priv->qlirq = qlirq;
	priv->qbase = qbase;
	priv->qinitid = qinitid;
	priv->shost = shost;
	priv->int_type = INT_TYPE;					

	if (request_irq(qlirq, qlogicfas408_ihandl, 0, qlogic_name, shost))
		goto free_scsi_host;

	sprintf(priv->qinfo,
		"Qlogicfas Driver version 0.46, chip %02X at %03X, IRQ %d, TPdma:%d",
		qltyp, qbase, qlirq, QL_TURBO_PDMA);

	if (scsi_add_host(shost, NULL))
		goto free_interrupt;

	scsi_scan_host(shost);

	return shost;

free_interrupt:
	free_irq(qlirq, shost);

free_scsi_host:
	scsi_host_put(shost);
	
err:
	return NULL;
}

开发者ID:austriancoder，项目名称:linux，代码行数:55，代码来源:qlogic_stub.c

示例11: dmx3191d_probe_one

static int __devinit dmx3191d_probe_one(struct pci_dev *pdev,
        const struct pci_device_id *id)
{
    struct Scsi_Host *shost;
    unsigned long io;
    int error = -ENODEV;

    if (pci_enable_device(pdev))
        goto out;

    io = pci_resource_start(pdev, 0);
    if (!request_region(io, DMX3191D_REGION_LEN, DMX3191D_DRIVER_NAME)) {
        printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
                io, io + DMX3191D_REGION_LEN);
        goto out_disable_device;
    }

    shost = scsi_host_alloc(&dmx3191d_driver_template,
            sizeof(struct NCR5380_hostdata));
    if (!shost)
        goto out_release_region;       
    shost->io_port = io;
    shost->irq = pdev->irq;

    NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);

    if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
                DMX3191D_DRIVER_NAME, shost)) {
        /*
         * Steam powered scsi controllers run without an IRQ anyway
         */
        printk(KERN_WARNING "dmx3191: IRQ %d not available - "
                    "switching to polled mode.\n", pdev->irq);
        shost->irq = SCSI_IRQ_NONE;
    }

    pci_set_drvdata(pdev, shost);

    error = scsi_add_host(shost, &pdev->dev);
    if (error)
        goto out_free_irq;

    scsi_scan_host(shost);
    return 0;

 out_free_irq:
    free_irq(shost->irq, shost);
 out_release_region:
    release_region(io, DMX3191D_REGION_LEN);
 out_disable_device:
    pci_disable_device(pdev);
 out:
    return error;
}

开发者ID:274914765，项目名称:C，代码行数:54，代码来源:dmx3191d.c

示例12: oakscsi_probe

static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host) {
		ret = -ENOMEM;
		goto release;
	}

	priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
				   ecard_resource_len(ec, ECARD_RES_MEMC));
	if (!priv(host)->base) {
		ret = -ENOMEM;
		goto unreg;
	}

	host->irq = IRQ_NONE;
	host->n_io_port = 255;

	NCR5380_init(host, 0);

	printk("scsi%d: at port 0x%08lx irqs disabled",
		host->host_no, host->io_port);
	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_unmap;

	scsi_scan_host(host);
	goto out;

 out_unmap:
	iounmap(priv(host)->base);
 unreg:
	scsi_host_put(host);
 release:
	ecard_release_resources(ec);
 out:
	return ret;
}

开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:52，代码来源:oak.c

示例13: snirm710_probe

static int __init snirm710_probe(struct platform_device *dev)
{
	unsigned long base;
	struct NCR_700_Host_Parameters *hostdata;
	struct Scsi_Host *host;
	struct  resource *res;

	res = platform_get_resource(dev, IORESOURCE_MEM, 0);
	if (!res)
		return -ENODEV;

	base = res->start;
	hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
	if (!hostdata) {
		printk(KERN_ERR "%s: Failed to allocate host data\n",
		       dev->dev.bus_id);
		return -ENOMEM;
	}

	hostdata->dev = &dev->dev;
	dma_set_mask(&dev->dev, DMA_32BIT_MASK);
	hostdata->base = ioremap_nocache(CPHYSADDR(base), 0x100);
	hostdata->differential = 0;

	hostdata->clock = SNIRM710_CLOCK;
	hostdata->force_le_on_be = 1;
	hostdata->chip710 = 1;
	hostdata->burst_length = 4;

	host = NCR_700_detect(&snirm710_template, hostdata, &dev->dev);
	if (!host)
		goto out_kfree;
	host->this_id = 7;
	host->base = base;
	host->irq = platform_get_irq(dev, 0);
	if(request_irq(host->irq, NCR_700_intr, SA_SHIRQ, "snirm710", host)) {
		printk(KERN_ERR "snirm710: request_irq failed!\n");
		goto out_put_host;
	}

	dev_set_drvdata(&dev->dev, host);
	scsi_scan_host(host);

	return 0;

 out_put_host:
	scsi_host_put(host);
 out_kfree:
	iounmap(hostdata->base);
	kfree(hostdata);
	return -ENODEV;
}

开发者ID:StephenMacras，项目名称:dsl-n55u-bender，代码行数:52，代码来源:sni_53c710.c

示例14: NCR_D700_probe_one

static int __devinit
NCR_D700_probe_one(struct NCR_D700_private *p, int siop, int irq,
		   int slot, u32 region, int differential)
{
	struct NCR_700_Host_Parameters *hostdata;
	struct Scsi_Host *host;
	int ret;

	hostdata = kzalloc(sizeof(*hostdata), GFP_KERNEL);
	if (!hostdata) {
//		printk(KERN_ERR "NCR D700: SIOP%d: Failed to allocate host"
;
		return -ENOMEM;
	}

	if (!request_region(region, 64, "NCR_D700")) {
//		printk(KERN_ERR "NCR D700: Failed to reserve IO region 0x%x\n",
;
		ret = -ENODEV;
		goto region_failed;
	}
		
	/* Fill in the three required pieces of hostdata */
	hostdata->base = ioport_map(region, 64);
	hostdata->differential = (((1<<siop) & differential) != 0);
	hostdata->clock = NCR_D700_CLOCK_MHZ;
	hostdata->burst_length = 8;

	/* and register the siop */
	host = NCR_700_detect(&NCR_D700_driver_template, hostdata, p->dev);
	if (!host) {
		ret = -ENOMEM;
		goto detect_failed;
	}

	p->hosts[siop] = host;
	/* FIXME: read this from SUS */
	host->this_id = id_array[slot * 2 + siop];
	host->irq = irq;
	host->base = region;
	scsi_scan_host(host);

	return 0;

 detect_failed:
	release_region(region, 64);
 region_failed:
	kfree(hostdata);

	return ret;
}

开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:51，代码来源:NCR_D700.c

示例15: oakscsi_probe

static int oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	ret = ecard_request_resources(ec);
	if (ret)
		goto out;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host) {
		ret = -ENOMEM;
		goto release;
	}

	priv(host)->base = ioremap(ecard_resource_start(ec, ECARD_RES_MEMC),
				   ecard_resource_len(ec, ECARD_RES_MEMC));
	if (!priv(host)->base) {
		ret = -ENOMEM;
		goto unreg;
	}

	host->irq = NO_IRQ;
	host->n_io_port = 255;

	ret = NCR5380_init(host, 0);
	if (ret)
		goto out_unmap;

	NCR5380_maybe_reset_bus(host);

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_exit;

	scsi_scan_host(host);
	goto out;

 out_exit:
	NCR5380_exit(host);
 out_unmap:
	iounmap(priv(host)->base);
 unreg:
	scsi_host_put(host);
 release:
	ecard_release_resources(ec);
 out:
	return ret;
}

开发者ID:020gzh，项目名称:linux，代码行数:49，代码来源:oak.c

示例16: lasi700_probe

static int __init
lasi700_probe(struct parisc_device *dev)
{
	unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET;
	struct NCR_700_Host_Parameters *hostdata;
	struct Scsi_Host *host;

	hostdata = kmalloc(sizeof(*hostdata), GFP_KERNEL);
	if (!hostdata) {
		printk(KERN_ERR "%s: Failed to allocate host data\n",
		       dev->dev.bus_id);
		return -ENOMEM;
	}
	memset(hostdata, 0, sizeof(struct NCR_700_Host_Parameters));

	hostdata->dev = &dev->dev;
	dma_set_mask(&dev->dev, 0xffffffffUL);
	hostdata->base = base;
	hostdata->differential = 0;

	if (dev->id.sversion == LASI_700_SVERSION) {
		hostdata->clock = LASI700_CLOCK;
		hostdata->force_le_on_be = 1;
	} else {
		hostdata->clock = LASI710_CLOCK;
		hostdata->force_le_on_be = 0;
		hostdata->chip710 = 1;
		hostdata->dmode_extra = DMODE_FC2;
	}

	NCR_700_set_mem_mapped(hostdata);

	host = NCR_700_detect(&lasi700_template, hostdata, &dev->dev,
			      dev->irq, 7);
	if (!host)
		goto out_kfree;

	dev_set_drvdata(&dev->dev, host);
	scsi_scan_host(host);

	return 0;

 out_kfree:
	kfree(hostdata);
	return -ENODEV;
}

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:46，代码来源:lasi700.c

示例17: fdomain_config

static int fdomain_config(struct pcmcia_device *link)
{
    scsi_info_t *info = link->priv;
    int ret;
    char str[22];
    struct Scsi_Host *host;

    dev_dbg(&link->dev, "fdomain_config\n");

    ret = pcmcia_loop_config(link, fdomain_config_check, NULL);
    if (ret)
	    goto failed;

    if (!link->irq)
	    goto failed;
    ret = pcmcia_enable_device(link);
    if (ret)
	    goto failed;

    /* A bad hack... */
    release_region(link->resource[0]->start, resource_size(link->resource[0]));

    /* Set configuration options for the fdomain driver */
    sprintf(str, "%d,%d", (unsigned int) link->resource[0]->start, link->irq);
    fdomain_setup(str);

    host = __fdomain_16x0_detect(&fdomain_driver_template);
    if (!host) {
        printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
	goto failed;
    }

    if (scsi_add_host(host, NULL))
	    goto failed;
    scsi_scan_host(host);

    info->host = host;

    return 0;

failed:
    fdomain_release(link);
    return -ENODEV;
} /* fdomain_config */

开发者ID:CSCLOG，项目名称:beaglebone，代码行数:44，代码来源:fdomain_stub.c

示例18: oakscsi_probe

static int __devinit
oakscsi_probe(struct expansion_card *ec, const struct ecard_id *id)
{
	struct Scsi_Host *host;
	int ret = -ENOMEM;

	host = scsi_host_alloc(&oakscsi_template, sizeof(struct NCR5380_hostdata));
	if (!host)
		goto out;

	host->io_port = ecard_address(ec, ECARD_MEMC, 0);
	host->irq = IRQ_NONE;
	host->n_io_port = 255;

	ret = -EBUSY;
	if (!request_region (host->io_port, host->n_io_port, "Oak SCSI"))
		goto unreg;

	NCR5380_init(host, 0);

	printk("scsi%d: at port 0x%08lx irqs disabled",
		host->host_no, host->io_port);
	printk(" options CAN_QUEUE=%d  CMD_PER_LUN=%d release=%d",
		host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
	printk("\nscsi%d:", host->host_no);
	NCR5380_print_options(host);
	printk("\n");

	ret = scsi_add_host(host, &ec->dev);
	if (ret)
		goto out_release;

	scsi_scan_host(host);
	goto out;

 out_release:
	release_region(host->io_port, host->n_io_port);
 unreg:
	scsi_host_put(host);
 out:
	return ret;
}

开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:42，代码来源:oak.c

示例19: usb_stor_scan_dwork

/* Delayed-work routine to carry out SCSI-device scanning */
static void usb_stor_scan_dwork(struct work_struct *work)
{
	struct us_data *us = container_of(work, struct us_data,
			scan_dwork.work);
	struct device *dev = &us->pusb_intf->dev;
//---------------------------
pr_info("19 usb stor scan dwork\n");

	dev_dbg(dev, "starting scan\n");

	/* For bulk-only devices, determine the max LUN value */
	if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) {
		mutex_lock(&us->dev_mutex);
		us->max_lun = usb_stor_Bulk_max_lun(us);
		mutex_unlock(&us->dev_mutex);
	}
	scsi_scan_host(us_to_host(us));
	dev_dbg(dev, "scan complete\n");

	/* Should we unbind if no devices were detected? */

	usb_autopm_put_interface(us->pusb_intf);
	clear_bit(US_FLIDX_SCAN_PENDING, &us->dflags);
}

开发者ID:Andrealphus，项目名称:Drivers-for-USB-storage-Zhao，代码行数:25，代码来源:ourusb.c

示例20: fdomain_config

static void fdomain_config(dev_link_t *link)
{
    client_handle_t handle = link->handle;
    scsi_info_t *info = link->priv;
    tuple_t tuple;
    cisparse_t parse;
    int i, last_ret, last_fn;
    u_char tuple_data[64];
    char str[16];
    struct Scsi_Host *host;

    DEBUG(0, "fdomain_config(0x%p)\n", link);

    tuple.DesiredTuple = CISTPL_CONFIG;
    tuple.TupleData = tuple_data;
    tuple.TupleDataMax = 64;
    tuple.TupleOffset = 0;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
    CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
    link->conf.ConfigBase = parse.config.base;

    /* Configure card */
    link->state |= DEV_CONFIG;
    
    tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
    CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
    while (1) {
	if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
		pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
	    goto next_entry;
	link->conf.ConfigIndex = parse.cftable_entry.index;
	link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
	i = pcmcia_request_io(handle, &link->io);
	if (i == CS_SUCCESS) break;
    next_entry:
	CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
    }

    CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
    CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
    
    /* A bad hack... */
    release_region(link->io.BasePort1, link->io.NumPorts1);

    /* Set configuration options for the fdomain driver */
    sprintf(str, "%d,%d", link->io.BasePort1, link->irq.AssignedIRQ);
    fdomain_setup(str);
    
    host = __fdomain_16x0_detect(&fdomain_driver_template);
    if (!host) {
        printk(KERN_INFO "fdomain_cs: no SCSI devices found\n");
	goto cs_failed;
    }
 
    scsi_add_host(host, NULL); /* XXX handle failure */
    scsi_scan_host(host);

    sprintf(info->node.dev_name, "scsi%d", host->host_no);
    link->dev = &info->node;
    info->host = host;
    
    link->state &= ~DEV_CONFIG_PENDING;
    return;
    
cs_failed:
    cs_error(link->handle, last_fn, last_ret);
    fdomain_release(link);
    return;
    
} /* fdomain_config */

开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:71，代码来源:fdomain_stub.c

注：本文中的scsi_scan_host函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ scsi_sg_count函数代码示例发布时间：2022-05-30

C++ scsi_remove_host函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19159|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9981|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8320|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8690|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8634|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9649|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8617|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7994|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8648|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7531|2022-11-06

客服电话

电子邮件

C++ scsi_scan_host函数代码示例

示例1: rtsx_scan_thread

示例2: rtsx_scan_thread

示例3: rts51x_scan_thread

示例4: a2091_probe

示例5: mvme147_init

示例6: a4000t_probe

示例7: sim710_probe_common

示例8: dmx3191d_probe_one

示例9: cumanascsi1_probe

示例10: qlogicfas408_get_chip_type

示例11: dmx3191d_probe_one

示例12: oakscsi_probe

示例13: snirm710_probe

示例14: NCR_D700_probe_one

示例15: oakscsi_probe

示例16: lasi700_probe

示例17: fdomain_config

示例18: oakscsi_probe

示例19: usb_stor_scan_dwork

示例20: fdomain_config

请发表评论

全部评论

上一篇：

下一篇：

kojino/Harvard-Robust-Machine-Learning:

cescoffier/puppet-nexus: A Puppet Module

文的笔顺,诠释文的笔画,解读文的部首

abos3d/CleanArchitectKotlinFlowHiltSimpl

Cassolotl/sentient.cloud · GitHub

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053