• 设为首页
  • 点击收藏
  • 手机版
    手机扫一扫访问
    迪恩网络手机版
  • 关注官方公众号
    微信扫一扫关注
    公众号
登陆 注册

C++ scsi_remove_host函数代码示例

原作者: [db:作者] 来自: [db:来源] 收藏 邀请

本文整理汇总了C++中scsi_remove_host函数的典型用法代码示例。如果您正苦于以下问题：C++ scsi_remove_host函数的具体用法？C++ scsi_remove_host怎么用？C++ scsi_remove_host使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。



在下文中一共展示了scsi_remove_host函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: quiesce_and_remove_host

/* First stage of disconnect processing: stop all commands and remove
 * the host */
static void quiesce_and_remove_host(struct rtsx_dev *dev)
{
	struct Scsi_Host *host = rtsx_to_host(dev);
	struct rtsx_chip *chip = dev->chip;

	/* Prevent new transfers, stop the current command, and
	 * interrupt a SCSI-scan or device-reset delay */
	mutex_lock(&dev->dev_mutex);
	scsi_lock(host);
	rtsx_set_stat(chip, RTSX_STAT_DISCONNECT);
	scsi_unlock(host);
	mutex_unlock(&dev->dev_mutex);
	wake_up(&dev->delay_wait);
	wait_for_completion(&dev->scanning_done);

	/* Wait some time to let other threads exist */
	wait_timeout(100);

	/* queuecommand won't accept any new commands and the control
	 * thread won't execute a previously-queued command.  If there
	 * is such a command pending, complete it with an error. */
	mutex_lock(&dev->dev_mutex);
	if (chip->srb) {
		chip->srb->result = DID_NO_CONNECT << 16;
		scsi_lock(host);
		chip->srb->scsi_done(dev->chip->srb);
		chip->srb = NULL;
		scsi_unlock(host);
	}
	mutex_unlock(&dev->dev_mutex);

	/* Now we own no commands so it's safe to remove the SCSI host */
	scsi_remove_host(host);
}
开发者ID:alisheikh，项目名称:ktsan，代码行数:36，代码来源:rtsx.c


示例2: quiesce_and_remove_host

static void quiesce_and_remove_host(struct us_data *us)
{
	struct Scsi_Host *host = us_to_host(us);
//---------------------------
pr_info("17 quiesce and remove host\n");
	/* If the device is really gone, cut short reset delays */
	if (us->pusb_dev->state == USB_STATE_NOTATTACHED) {
		set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
		wake_up(&us->delay_wait);
	}

	/* Prevent SCSI scanning (if it hasn't started yet)
	 * or wait for the SCSI-scanning routine to stop.
	 */
	cancel_delayed_work_sync(&us->scan_dwork);

	/* Balance autopm calls if scanning was cancelled */
	if (test_bit(US_FLIDX_SCAN_PENDING, &us->dflags))
		usb_autopm_put_interface_no_suspend(us->pusb_intf);

	/* Removing the host will perform an orderly shutdown: caches
	 * synchronized, disks spun down, etc.
	 */
	scsi_remove_host(host);

	/* Prevent any new commands from being accepted and cut short
	 * reset delays.
	 */
	scsi_lock(host);
	set_bit(US_FLIDX_DISCONNECTING, &us->dflags);
	scsi_unlock(host);
	wake_up(&us->delay_wait);
}
开发者ID:Andrealphus，项目名称:Drivers-for-USB-storage-Zhao，代码行数:33，代码来源:ourusb.c


示例3: NCR_D700_remove_one

static void __devexit
NCR_D700_remove_one(struct Scsi_Host *host)
{
	scsi_remove_host(host);
	NCR_700_release(host);
	kfree((struct NCR_700_Host_Parameters *)host->hostdata[0]);
	free_irq(host->irq, host);
	release_region(host->base, 64);
}
开发者ID:rrowicki，项目名称:Chrono_Kernel-1，代码行数:9，代码来源:NCR_D700.c


示例4: mvme147_exit

static void __exit mvme147_exit(void)
{
	scsi_remove_host(mvme147_shost);

	/* XXX Make sure DMA is stopped! */
	free_irq(MVME147_IRQ_SCSI_PORT, mvme147_shost);
	free_irq(MVME147_IRQ_SCSI_DMA, mvme147_shost);

	scsi_host_put(mvme147_shost);
}
开发者ID:AlexShiLucky，项目名称:linux，代码行数:10，代码来源:mvme147.c


示例5: oakscsi_remove

static void __devexit oakscsi_remove(struct expansion_card *ec)
{
	struct Scsi_Host *host = ecard_get_drvdata(ec);

	ecard_set_drvdata(ec, NULL);
	scsi_remove_host(host);

	release_region(host->io_port, host->n_io_port);
	scsi_host_put(host);
}
开发者ID:iPodLinux，项目名称:linux-2.6.7-ipod，代码行数:10，代码来源:oak.c


示例6: fdomain_release

static void fdomain_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "fdomain_release\n");

	scsi_remove_host(info->host);
	pcmcia_disable_device(link);
	scsi_unregister(info->host);
}
开发者ID:CSCLOG，项目名称:beaglebone，代码行数:10，代码来源:fdomain_stub.c


示例7: mac_scsi_remove

static int __exit mac_scsi_remove(struct platform_device *pdev)
{
	struct Scsi_Host *instance = platform_get_drvdata(pdev);

	scsi_remove_host(instance);
	if (instance->irq != NO_IRQ)
		free_irq(instance->irq, instance);
	NCR5380_exit(instance);
	scsi_host_put(instance);
	return 0;
}
开发者ID:Announcement，项目名称:linux，代码行数:11，代码来源:mac_scsi.c


示例8: zalon_remove

static int __exit zalon_remove(struct parisc_device *dev)
{
	struct Scsi_Host *host = dev_get_drvdata(&dev->dev);
	int irq = host->irq;

	scsi_remove_host(host);
	ncr53c8xx_release(host);
	free_irq(irq, host);

	return 0;
}
开发者ID:BackupTheBerlios，项目名称:tuxap，代码行数:11，代码来源:zalon.c


示例9: a2091_remove

static void __devexit a2091_remove(struct zorro_dev *z)
{
	struct Scsi_Host *instance = zorro_get_drvdata(z);
	struct a2091_hostdata *hdata = shost_priv(instance);

	hdata->regs->CNTR = 0;
	scsi_remove_host(instance);
	free_irq(IRQ_AMIGA_PORTS, instance);
	scsi_host_put(instance);
	release_mem_region(z->resource.start, 256);
}
开发者ID:DirtyDroidX，项目名称:android_kernel_htc_m8ul，代码行数:11，代码来源:a2091.c


示例10: oakscsi_remove

static void __devexit oakscsi_remove(struct expansion_card *ec)
{
	struct Scsi_Host *host = ecard_get_drvdata(ec);

	ecard_set_drvdata(ec, NULL);
	scsi_remove_host(host);

	NCR5380_exit(host);
	iounmap(priv(host)->base);
	scsi_host_put(host);
	ecard_release_resources(ec);
}
开发者ID:119-org，项目名称:hi3518-osdrv，代码行数:12，代码来源:oak.c


示例11: zorro7xx_remove_one

static __devexit void zorro7xx_remove_one(struct zorro_dev *z)
{
	struct Scsi_Host *host = zorro_get_drvdata(z);
	struct NCR_700_Host_Parameters *hostdata = shost_priv(host);

	scsi_remove_host(host);

	NCR_700_release(host);
	kfree(hostdata);
	free_irq(host->irq, host);
	zorro_release_device(z);
}
开发者ID:cilynx，项目名称:dd-wrt，代码行数:12，代码来源:zorro7xx.c


示例12: tcm_loop_driver_remove

static int tcm_loop_driver_remove(struct device *dev)
{
    struct tcm_loop_hba *tl_hba;
    struct Scsi_Host *sh;

    tl_hba = to_tcm_loop_hba(dev);
    sh = tl_hba->sh;

    scsi_remove_host(sh);
    scsi_host_put(sh);
    return 0;
}
开发者ID:JackWangCUMT，项目名称:linux，代码行数:12，代码来源:tcm_loop.c


示例13: cumanascsi1_remove

static void __devexit cumanascsi1_remove(struct expansion_card *ec)
{
	struct Scsi_Host *host = ecard_get_drvdata(ec);

	ecard_set_drvdata(ec, NULL);

	scsi_remove_host(host);
	free_irq(host->irq, host);
	NCR5380_exit(host);
	release_region(host->io_port, host->n_io_port);
	scsi_host_put(host);
}
开发者ID:Antonio-Zhou，项目名称:Linux-2.6.11，代码行数:12，代码来源:cumana_1.c


示例14: qlogic_release

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	DEBUG(0, "qlogic_release(0x%p)\n", link);

	scsi_remove_host(info->host);

	free_irq(link->irq.AssignedIRQ, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}
开发者ID:325116067，项目名称:semc-qsd8x50，代码行数:13，代码来源:qlogic_stub.c


示例15: amiga_a3000_scsi_remove

static int __exit amiga_a3000_scsi_remove(struct platform_device *pdev)
{
	struct Scsi_Host *instance = platform_get_drvdata(pdev);
	struct a3000_hostdata *hdata = shost_priv(instance);
	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	hdata->regs->CNTR = 0;
	scsi_remove_host(instance);
	free_irq(IRQ_AMIGA_PORTS, instance);
	scsi_host_put(instance);
	release_mem_region(res->start, resource_size(res));
	return 0;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:13，代码来源:a3000.c


示例16: dmx3191d_remove_one

static void dmx3191d_remove_one(struct pci_dev *pdev)
{
	struct Scsi_Host *shost = pci_get_drvdata(pdev);
	struct NCR5380_hostdata *hostdata = shost_priv(shost);
	unsigned long io = hostdata->base;

	scsi_remove_host(shost);

	NCR5380_exit(shost);
	scsi_host_put(shost);
	release_region(io, DMX3191D_REGION_LEN);
	pci_disable_device(pdev);
}
开发者ID:Announcement，项目名称:linux，代码行数:13，代码来源:dmx3191d.c


示例17: qlogic_release

static void qlogic_release(struct pcmcia_device *link)
{
	scsi_info_t *info = link->priv;

	dev_dbg(&link->dev, "qlogic_release\n");

	scsi_remove_host(info->host);

	free_irq(link->irq, info->host);
	pcmcia_disable_device(link);

	scsi_host_put(info->host);
}
开发者ID:austriancoder，项目名称:linux，代码行数:13，代码来源:qlogic_stub.c


示例18: snirm710_driver_remove

static int __exit snirm710_driver_remove(struct platform_device *dev)
{
	struct Scsi_Host *host = dev_get_drvdata(&dev->dev);
	struct NCR_700_Host_Parameters *hostdata =
		(struct NCR_700_Host_Parameters *)host->hostdata[0];

	scsi_remove_host(host);
	NCR_700_release(host);
	free_irq(host->irq, host);
	iounmap(hostdata->base);
	kfree(hostdata);

	return 0;
}
开发者ID:Medvedroid，项目名称:OT_903D-kernel-2.6.35.7，代码行数:14，代码来源:sni_53c710.c


示例19: a4000t_device_remove

static __devexit int a4000t_device_remove(struct device *dev)
{
	struct Scsi_Host *host = dev_get_drvdata(dev);
	struct NCR_700_Host_Parameters *hostdata = shost_priv(host);

	scsi_remove_host(host);

	NCR_700_release(host);
	kfree(hostdata);
	free_irq(host->irq, host);
	release_mem_region(A4000T_SCSI_ADDR, 0x1000);

	return 0;
}
开发者ID:cilynx，项目名称:dd-wrt，代码行数:14，代码来源:a4000t.c


示例20: isci_unregister

static void isci_unregister(struct isci_host *isci_host)
{
	struct Scsi_Host *shost;

	if (!isci_host)
		return;

	shost = to_shost(isci_host);
	scsi_remove_host(shost);
	sas_unregister_ha(&isci_host->sas_ha);

	sas_remove_host(shost);
	scsi_host_put(shost);
}
开发者ID:020gzh，项目名称:linux，代码行数:14，代码来源:init.c



注：本文中的scsi_remove_host函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花
握手
雷人
路过
鸡蛋
该文章已有0人参与评论

请发表评论

全部评论

专题导读
More+
上一篇：
C++ scsi_scan_host函数代码示例发布时间：2022-05-30
下一篇：
C++ scsi_host_put函数代码示例发布时间：2022-05-30
热门推荐
More+
热门话题
More+
阅读排行榜

扫描微信二维码

查看手机版网站

随时了解更新最新资讯

139-2527-9053

在线客服（服务时间 9:00～18:00）

在线QQ客服
地址：深圳市南山区西丽大学城创智工业园
电邮：jeky_zhao#qq.com
移动电话：139-2527-9053

Powered by 互联科技 X3.4© 2001-2213 极客世界.|Sitemap