C++ rtw_read32函数代码示例

OStack程序员社区-中国程序员成长平台 › 门户 › 编程› C++›C++教程

原作者: [db:作者] 来自: [db:来源] 收藏邀请

本文整理汇总了C++中rtw_read32函数的典型用法代码示例。如果您正苦于以下问题：C++ rtw_read32函数的具体用法？C++ rtw_read32怎么用？C++ rtw_read32使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。

在下文中一共展示了rtw_read32函数的20个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的C++代码示例。

示例1: rtl8812_sreset_linked_status_check

void rtl8812_sreset_linked_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	u32 rx_dma_status = 0;
	rx_dma_status = rtw_read32(padapter, REG_RXDMA_STATUS);
	if (rx_dma_status != 0x00)
		RTW_INFO("%s REG_RXDMA_STATUS:0x%08x\n", __FUNCTION__, rx_dma_status);
#if 0
	u32 regc50, regc58, reg824, reg800;
	regc50 = rtw_read32(padapter, 0xc50);
	regc58 = rtw_read32(padapter, 0xc58);
	reg824 = rtw_read32(padapter, 0x824);
	reg800 = rtw_read32(padapter, 0x800);
	if (((regc50 & 0xFFFFFF00) != 0x69543400) ||
	    ((regc58 & 0xFFFFFF00) != 0x69543400) ||
	    (((reg824 & 0xFFFFFF00) != 0x00390000) && (((reg824 & 0xFFFFFF00) != 0x80390000))) ||
	    (((reg800 & 0xFFFFFF00) != 0x03040000) && ((reg800 & 0xFFFFFF00) != 0x83040000))) {
		RTW_INFO("%s regc50:0x%08x, regc58:0x%08x, reg824:0x%08x, reg800:0x%08x,\n", __FUNCTION__,
			 regc50, regc58, reg824, reg800);
		rtw_hal_sreset_reset(padapter);
	}
#endif

	if (psrtpriv->dbg_trigger_point == SRESET_TGP_LINK_STATUS) {
		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
		rtw_hal_sreset_reset(padapter);
		return;
	}
}

开发者ID:plathome，项目名称:debian_based_firmware，代码行数:31，代码来源:rtl8812a_sreset.c

示例2: rtl8188e_set_FwMediaStatus_cmd

void rtl8188e_set_FwMediaStatus_cmd(PADAPTER padapter, u16 mstatus_rpt )
{
	u8 opmode,macid;
	u16 mst_rpt = cpu_to_le16 (mstatus_rpt);
	u32 reg_macid_no_link = REG_MACID_NO_LINK_0;
	opmode = (u8) mst_rpt;
	macid = (u8)(mst_rpt >> 8)  ;
	DBG_871X("### %s: MStatus=%x MACID=%d \n", __FUNCTION__,opmode,macid);
	FillH2CCmd_88E(padapter, H2C_COM_MEDIA_STATUS_RPT, sizeof(mst_rpt), (u8 *)&mst_rpt);

	if(macid > 31){
		macid = macid-32;
		reg_macid_no_link = REG_MACID_NO_LINK_1;
	}

	//Delete select macid (MACID 0~63) from queue list.
	if(opmode == 1)// 1:connect
	{
		rtw_write32(padapter,reg_macid_no_link, (rtw_read32(padapter,reg_macid_no_link) & (~BIT(macid))));
	}
	else//0: disconnect
	{
		rtw_write32(padapter,reg_macid_no_link, (rtw_read32(padapter,reg_macid_no_link)|BIT(macid)));
	}



}

开发者ID:takitr，项目名称:linux-wetek-3.10.y-1，代码行数:28，代码来源:rtl8188e_cmd.c

示例3: rtl8192c_sreset_linked_status_check

void rtl8192c_sreset_linked_status_check(_adapter *padapter)
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	u32 regc50,regc58,reg824,reg800;
	regc50 = rtw_read32(padapter,0xc50);
	regc58 = rtw_read32(padapter,0xc58);
	reg824 = rtw_read32(padapter,0x824);
	reg800 = rtw_read32(padapter,0x800);
	if(	((regc50&0xFFFFFF00)!= 0x69543400)||
		((regc58&0xFFFFFF00)!= 0x69543400)||
		(((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))||
		( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000)))
	{
		DBG_8192C("%s regc50:0x%08x, regc58:0x%08x, reg824:0x%08x, reg800:0x%08x,\n", __FUNCTION__,
			regc50, regc58, reg824, reg800);
		rtw_hal_sreset_reset(padapter);
	}

	if (psrtpriv->dbg_trigger_point == SRESET_TGP_LINK_STATUS) {
		psrtpriv->dbg_trigger_point = SRESET_TGP_NULL;
		rtw_hal_sreset_reset(padapter);
		return;
	}
}

开发者ID:1nfused，项目名称:RemoteAccess，代码行数:26，代码来源:rtl8192c_sreset.c

示例4: rtl8192c_sreset_linked_status_check

void rtl8192c_sreset_linked_status_check(_adapter *padapter)
{
	u32 regc50,regc58,reg824,reg800;
	regc50 = rtw_read32(padapter,0xc50);
	regc58 = rtw_read32(padapter,0xc58);
	reg824 = rtw_read32(padapter,0x824);
	reg800 = rtw_read32(padapter,0x800);	
	if(	((regc50&0xFFFFFF00)!= 0x69543400)||
		((regc58&0xFFFFFF00)!= 0x69543400)||
		(((reg824&0xFFFFFF00)!= 0x00390000)&&(((reg824&0xFFFFFF00)!= 0x80390000)))||
		( ((reg800&0xFFFFFF00)!= 0x03040000)&&((reg800&0xFFFFFF00)!= 0x83040000)))
	{
		rtl8192c_silentreset_for_specific_platform(padapter);	
	}
}

开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:15，代码来源:rtl8192c_sreset.c

示例5: _LLTRead

static u8 _LLTRead(
	IN  PADAPTER	Adapter,
	IN	u32		address
	)
{
	int		count = 0;
	u32		value = _LLT_INIT_ADDR(address) | _LLT_OP(_LLT_READ_ACCESS);

	rtw_write32(Adapter, REG_LLT_INIT, value);

	//polling and get value
	do{
		
		value = rtw_read32(Adapter, REG_LLT_INIT);
		if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){
			return (u8)value;
		}
		
		if(count > POLLING_LLT_THRESHOLD){
			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling read LLT done at address %d!\n", address));
			break;
		}
	}while(count++);

	return 0xFF;

}

开发者ID:dreamsxin，项目名称:BananaPi-Android-4.2.2-Liab，代码行数:27，代码来源:usb_halinit.c

示例6: _LLTWrite

//-------------------------------------------------------------------------
//
// LLT R/W/Init function
//
//-------------------------------------------------------------------------
static u8 _LLTWrite(
	IN  PADAPTER	Adapter,
	IN	u32		address,
	IN	u32		data
	)
{
	u8	status = _SUCCESS;
	int 		count = 0;
	u32 		value = _LLT_INIT_ADDR(address) | _LLT_INIT_DATA(data) | _LLT_OP(_LLT_WRITE_ACCESS);

	rtw_write32(Adapter, REG_LLT_INIT, value);
	
	//polling
	do{
		
		value = rtw_read32(Adapter, REG_LLT_INIT);
		if(_LLT_NO_ACTIVE == _LLT_OP_VALUE(value)){
			break;
		}
		
		if(count > POLLING_LLT_THRESHOLD){
			//RT_TRACE(COMP_INIT,DBG_SERIOUS,("Failed to polling write LLT done at address %d!\n", address));
			status = _FAIL;
			break;
		}
	}while(count++);

	return status;
	
}

开发者ID:dreamsxin，项目名称:BananaPi-Android-4.2.2-Liab，代码行数:35，代码来源:usb_halinit.c

示例7: ips_enter

void ips_enter(_adapter * padapter)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	
	_enter_pwrlock(&pwrpriv->lock);

	pwrpriv->bips_processing = _TRUE;	

	// syn ips_mode with request
	pwrpriv->ips_mode = pwrpriv->ips_mode_req;
	
	pwrpriv->ips_enter_cnts++;	
	DBG_8192C("==>ips_enter cnts:%d\n",pwrpriv->ips_enter_cnts);
	
	if(rf_off == pwrpriv->change_rfpwrstate )
	{	
		DBG_8192C("==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x%08x).... \n\n",rtw_read32(padapter,0x4c));
		
		if(pwrpriv->ips_mode == IPS_LEVEL_2) {
			u8 rf_type;
			padapter->HalFunc.GetHwRegHandler(padapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
			pwrpriv->bkeepfwalive = (  rf_type == RF_1T1R  )? _TRUE : _FALSE;//rtl8192cu cannot support IPS_Level2 ,must debug
		}
		
		rtw_ips_pwr_down(padapter);
		pwrpriv->current_rfpwrstate = rf_off;
	}	
	pwrpriv->bips_processing = _FALSE;	
	_exit_pwrlock(&pwrpriv->lock);
	
}

开发者ID:artm1248，项目名称:wifi，代码行数:32，代码来源:rtw_pwrctrl.c

示例8: proc_get_read_reg

int proc_get_read_reg(struct seq_file *m, void *v)
{
	struct net_device *dev = m->private;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);

	if (proc_get_read_addr==0xeeeeeeee) {
		DBG_871X_SEL_NL(m, "address not initialized\n");
		return 0;
	}	

	switch(proc_get_read_len)
	{
		case 1:			
			DBG_871X_SEL_NL(m, "rtw_read8(0x%x)=0x%x\n", proc_get_read_addr, rtw_read8(padapter, proc_get_read_addr));
			break;
		case 2:
			DBG_871X_SEL_NL(m, "rtw_read16(0x%x)=0x%x\n", proc_get_read_addr, rtw_read16(padapter, proc_get_read_addr));
			break;
		case 4:
			DBG_871X_SEL_NL(m, "rtw_read32(0x%x)=0x%x\n", proc_get_read_addr, rtw_read32(padapter, proc_get_read_addr));
			break;
		default:
			DBG_871X_SEL_NL(m, "error read length=%d\n", proc_get_read_len);
			break;
	}

	return 0;
}

开发者ID:NotKit，项目名称:android-ia_kernel_intel_baytrail，代码行数:28，代码来源:rtw_debug.c

示例9: fw_cmd_data

static void fw_cmd_data(PADAPTER pAdapter, u32 *value, u8 flag)
{
	if (flag == 0)	// set
		rtw_write32(pAdapter, IOCMD_DATA_REG, *value);
	else		// query
		*value = rtw_read32(pAdapter, IOCMD_DATA_REG);
}

开发者ID:FFTEAM，项目名称:open-duckbox-project-sh4-pingulux-git，代码行数:7，代码来源:rtw_mp.c

示例10: _ips_leave

int _ips_leave(_adapter * padapter)
{
	struct pwrctrl_priv *pwrpriv = adapter_to_pwrctl(padapter);
	int result = _SUCCESS;

	if ((pwrpriv->rf_pwrstate == rf_off) &&(!pwrpriv->bips_processing))
	{
		pwrpriv->bips_processing = true;
		pwrpriv->change_rfpwrstate = rf_on;
		pwrpriv->ips_leave_cnts++;
		DBG_871X("==>ips_leave cnts:%d\n", pwrpriv->ips_leave_cnts);

		if ((result = rtw_ips_pwr_up(padapter)) == _SUCCESS) {
			pwrpriv->rf_pwrstate = rf_on;
		}
		DBG_871X_LEVEL(_drv_always_, "nolinked power save leave\n");

		DBG_871X("==> ips_leave.....LED(0x%08x)...\n", rtw_read32(padapter, 0x4c));
		pwrpriv->bips_processing = false;

		pwrpriv->bkeepfwalive = false;
		pwrpriv->bpower_saving = false;
	}

	return result;
}

开发者ID:jasonabele，项目名称:rtl8723bs，代码行数:26，代码来源:rtw_pwrctrl.c

示例11: ReadChipVersion

//-------------------------------------------------------------------
//
//	EEPROM/EFUSE Content Parsing
//
//-------------------------------------------------------------------
static VERSION_8192C
ReadChipVersion(
	IN	PADAPTER	Adapter
	)
{
	u32				value32;
	VERSION_8192C	version;
	u8				ChipVersion=0;	
	
	value32 = rtw_read32(Adapter, REG_SYS_CFG);
#if 0
	if(value32 & TRP_VAUX_EN){		
		//Test chip
		switch(((value32 & CHIP_VER_RTL_MASK) >> CHIP_VER_RTL_SHIFT))
		{
			case 0: //8191C
				version = VERSION_TEST_CHIP_91C;
				break;
			case 1: //8188C
				version = VERSION_TEST_CHIP_88C;
				break;
			default:
				// TODO: set default to 1T1R?
				RT_ASSERT(FALSE,("Chip Version can't be recognized.\n"));
				break;
		}
		
	}
	else{

开发者ID:WayWingsDev，项目名称:Gplus_2159_0801，代码行数:34，代码来源:rtl8192c_d_hal_init.c

示例12: proc_get_read_reg

int proc_get_read_reg(struct seq_file *m, void* data)
{	
	struct net_device *dev = m->private;
	_adapter *padapter = (_adapter *)rtw_netdev_priv(dev);

	if(proc_get_read_addr==0xeeeeeeee)
	{
		return 0;
	}

	switch(proc_get_read_len)
	{
		case 1:			
			seq_printf(m, "rtw_read8(0x%x)=0x%x\n", proc_get_read_addr, rtw_read8(padapter, proc_get_read_addr));
			break;
		case 2:
			seq_printf(m, "rtw_read16(0x%x)=0x%x\n", proc_get_read_addr, rtw_read16(padapter, proc_get_read_addr));
			break;
		case 4:
			seq_printf(m, "rtw_read32(0x%x)=0x%x\n", proc_get_read_addr, rtw_read32(padapter, proc_get_read_addr));
			break;
		default:
			seq_printf(m, "error read length=%d\n", proc_get_read_len);
			break;
	}
	return 0;
}

开发者ID:kolasa，项目名称:RTL8188C_8192C_USB，代码行数:27，代码来源:rtw_debug.c

示例13: rtl8188e_sreset_xmit_status_check

void rtl8188e_sreset_xmit_status_check(struct adapter *padapter)
{
	struct hal_data_8188e	*pHalData = GET_HAL_DATA(padapter);
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;

	unsigned long current_time;
	struct xmit_priv	*pxmitpriv = &padapter->xmitpriv;
	unsigned int diff_time;
	u32 txdma_status;

	txdma_status = rtw_read32(padapter, REG_TXDMA_STATUS);
	if (txdma_status != 0x00) {
		DBG_88E("%s REG_TXDMA_STATUS:0x%08x\n", __func__, txdma_status);
		rtw_write32(padapter, REG_TXDMA_STATUS, txdma_status);
		rtl8188e_silentreset_for_specific_platform(padapter);
	}
	/* total xmit irp = 4 */
	current_time = jiffies;
	if (0 == pxmitpriv->free_xmitbuf_cnt) {
		diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_time);

		if (diff_time > 2000) {
			if (psrtpriv->last_tx_complete_time == 0) {
				psrtpriv->last_tx_complete_time = current_time;
			} else {
				diff_time = jiffies_to_msecs(current_time - psrtpriv->last_tx_complete_time);
				if (diff_time > 4000) {
					DBG_88E("%s tx hang\n", __func__);
					rtl8188e_silentreset_for_specific_platform(padapter);
				}
			}
		}
	}
}

开发者ID:09sea98，项目名称:rtl8188eu，代码行数:34，代码来源:rtl8188e_sreset.c

示例14: EnableInterrupt8723BSdio

//
//	Description:
//		Enalbe SDIO Host Interrupt Mask configuration on SDIO local domain.
//
//	Assumption:
//		1. Using SDIO Local register ONLY for configuration.
//		2. PASSIVE LEVEL
//
//	Created by Roger, 2011.02.11.
//
void EnableInterrupt8723BSdio(PADAPTER padapter)
{
	PHAL_DATA_TYPE pHalData;
	u32 himr;

#ifdef CONFIG_CONCURRENT_MODE
	if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
		padapter = padapter->pbuddy_adapter;
	}
#endif
	pHalData = GET_HAL_DATA(padapter);

	himr = cpu_to_le32(pHalData->sdio_himr);
	sdio_local_write(padapter, SDIO_REG_HIMR, 4, (u8*)&himr);

	RT_TRACE(_module_hci_ops_c_, _drv_notice_,
		("%s: enable SDIO HIMR=0x%08X\n", __FUNCTION__, pHalData->sdio_himr));

	// Update current system IMR settings
	himr = rtw_read32(padapter, REG_HSIMR);
	rtw_write32(padapter, REG_HSIMR, himr|pHalData->SysIntrMask);

	RT_TRACE(_module_hci_ops_c_, _drv_notice_,
		("%s: enable HSIMR=0x%08X\n", __FUNCTION__, pHalData->SysIntrMask));

	//
	// <Roger_Notes> There are some C2H CMDs have been sent before system interrupt is enabled, e.g., C2H, CPWM.
	// So we need to clear all C2H events that FW has notified, otherwise FW won't schedule any commands anymore.
	// 2011.10.19.
	//
	rtw_write8(padapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}

开发者ID:STPJ，项目名称:linux-3.4-sunxi，代码行数:42，代码来源:sdio_ops.c

示例15: ips_enter

void ips_enter(_adapter * padapter)
{
	struct pwrctrl_priv *pwrpriv = &padapter->pwrctrlpriv;
	struct mlme_priv *pmlmepriv = &(padapter->mlmepriv);
	
	_enter_pwrlock(&pwrpriv->lock);

	pwrpriv->bips_processing = _TRUE;	

	// syn ips_mode with request
	pwrpriv->ips_mode = pwrpriv->ips_mode_req;
	
	pwrpriv->ips_enter_cnts++;	
	DBG_8192C("==>ips_enter cnts:%d\n",pwrpriv->ips_enter_cnts);
	
	if(rf_off == pwrpriv->change_rfpwrstate )
	{	
		DBG_8192C("==>power_saving_ctrl_wk_hdl change rf to OFF...LED(0x%08x).... \n\n",rtw_read32(padapter,0x4c));
		
		if(pwrpriv->ips_mode == IPS_LEVEL_2)
			pwrpriv->bkeepfwalive = _TRUE;
		
		rtw_ips_pwr_down(padapter);
		pwrpriv->rf_pwrstate = rf_off;
	}	
	pwrpriv->bips_processing = _FALSE;	
	_exit_pwrlock(&pwrpriv->lock);
	
}

开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:29，代码来源:rtw_pwrctrl.c

示例16: rtl8192c_sreset_get_wifi_status

u8 rtl8192c_sreset_get_wifi_status(_adapter *padapter)	
{
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);	
	struct sreset_priv *psrtpriv = &pHalData->srestpriv;	
	
	u8 status = WIFI_STATUS_SUCCESS;
	u32 val32 = 0;
	_irqL irqL;	
	if(psrtpriv->silent_reset_inprogress == _TRUE)
        {
		return status;
	}
	val32 =rtw_read32(padapter,REG_TXDMA_STATUS);
	if(val32==0xeaeaeaea){
		psrtpriv->Wifi_Error_Status = WIFI_IF_NOT_EXIST;
	}
	else if(val32!=0){
		DBG_8192C("txdmastatu(%x)\n",val32);
		psrtpriv->Wifi_Error_Status = WIFI_MAC_TXDMA_ERROR;
	}	

	if(WIFI_STATUS_SUCCESS !=psrtpriv->Wifi_Error_Status)
	{
		DBG_8192C("==>%s error_status(0x%x) \n",__FUNCTION__,psrtpriv->Wifi_Error_Status);
		status = (psrtpriv->Wifi_Error_Status &( ~(USB_READ_PORT_FAIL|USB_WRITE_PORT_FAIL)));
	}
	DBG_8192C("==> %s wifi_status(0x%x)\n",__FUNCTION__,status);

	//status restore 
	psrtpriv->Wifi_Error_Status = WIFI_STATUS_SUCCESS;

	return status;
}

开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:33，代码来源:rtl8192c_sreset.c

示例17: ClearInterrupt8723ASdio

//
//	Description:
//		Clear corresponding SDIO Host ISR interrupt service.
//
//	Assumption:
//		Using SDIO Local register ONLY for configuration.
//
//	Created by Roger, 2011.02.11.
//
void ClearInterrupt8723ASdio(PADAPTER padapter)
{
	u32 tmp = 0;
	tmp = rtw_read32(padapter, SPI_LOCAL_OFFSET | SDIO_REG_HISR);
	rtw_write32(padapter, SPI_LOCAL_OFFSET|SDIO_REG_HISR, tmp);
//	padapter->IsrContent.IntArray[0] = 0;
	padapter->IsrContent = 0;
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:17，代码来源:gspi_ops.c

示例18: ODM_EdcaTurboInit

void
ODM_EdcaTurboInit(
	IN	void *		pDM_VOID)
{
	PDM_ODM_T		pDM_Odm = (PDM_ODM_T)pDM_VOID;
	PADAPTER	Adapter = pDM_Odm->Adapter;
	pDM_Odm->DM_EDCA_Table.bCurrentTurboEDCA = false;
	pDM_Odm->DM_EDCA_Table.bIsCurRDLState = false;
	Adapter->recvpriv.bIsAnyNonBEPkts =false;

	ODM_RT_TRACE(pDM_Odm,ODM_COMP_EDCA_TURBO,ODM_DBG_LOUD,("Orginial VO PARAM: 0x%x\n",rtw_read32(pDM_Odm->Adapter,ODM_EDCA_VO_PARAM)));
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_EDCA_TURBO,ODM_DBG_LOUD,("Orginial VI PARAM: 0x%x\n",rtw_read32(pDM_Odm->Adapter,ODM_EDCA_VI_PARAM)));
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_EDCA_TURBO,ODM_DBG_LOUD,("Orginial BE PARAM: 0x%x\n",rtw_read32(pDM_Odm->Adapter,ODM_EDCA_BE_PARAM)));
	ODM_RT_TRACE(pDM_Odm,ODM_COMP_EDCA_TURBO,ODM_DBG_LOUD,("Orginial BK PARAM: 0x%x\n",rtw_read32(pDM_Odm->Adapter,ODM_EDCA_BK_PARAM)));


}	// ODM_InitEdcaTurbo

开发者ID:jozzse，项目名称:rtl8723bs，代码行数:17，代码来源:odm_EdcaTurboCheck.c

示例19: DisableInterruptButCpwm28723ASdio

void DisableInterruptButCpwm28723ASdio(PADAPTER padapter)
{
	u32 himr, tmp;

#ifdef CONFIG_CONCURRENT_MODE
	if ((padapter->isprimary == _FALSE) && padapter->pbuddy_adapter){
		padapter = padapter->pbuddy_adapter;
	}
#endif
	tmp = rtw_read32(padapter, SDIO_LOCAL_BASE | SDIO_REG_HIMR);
	DBG_871X("DisableInterruptButCpwm28723ASdio(): Read SDIO_REG_HIMR: 0x%08x\n", tmp);

	himr = cpu_to_le32(SPI_HIMR_DISABLED) | SPI_HISR_CPWM2;
	rtw_write32(padapter, SPI_LOCAL_OFFSET | SDIO_REG_HIMR, himr);

	tmp = rtw_read32(padapter, SPI_LOCAL_OFFSET | SDIO_REG_HIMR);
	DBG_871X("DisableInterruptButCpwm28723ASdio(): Read again SDIO_REG_HIMR: 0x%08x\n", tmp);
}

开发者ID:abgoyal，项目名称:alcatel_ot_4020D_kernel，代码行数:18，代码来源:gspi_ops.c

示例20: TDLS_restore_workitem_callback

void TDLS_restore_workitem_callback(struct work_struct *work)
{
	struct mlme_ext_priv*pmlmeext = container_of(work, struct mlme_ext_priv, TDLS_restore_workitem);
	_adapter *padapter = pmlmeext->padapter;
	u32 bit_6=1<<6;
	
	rtw_write32(padapter, 0x0608, rtw_read32(padapter, 0x0608)|(bit_6));
	DBG_8192C("wirte 0x0608, set bit6 on\n");
}

开发者ID:Astralix，项目名称:rk29_kernel_308，代码行数:9，代码来源:mlme_linux.c

注：本文中的rtw_read32函数示例由纯净天空整理自Github/MSDocs等源码及文档管理平台，相关代码片段筛选自各路编程大神贡献的开源项目，源码版权归原作者所有，传播和使用请参考对应项目的License；未经允许，请勿转载。

鲜花

握手

雷人

路过

鸡蛋

该文章已有0人参与评论

请发表评论

全部评论

专题导读

More+

10-27 六六分期app的软件客服如何联系？(六六分期

11-06 可心卡盟:win10系统火狐flash插件崩溃怎么

11-06 亲亲特价:怎么删除回收站图标

11-06 济南大学虚拟社区:鲁大师节能降温的具体办

11-06 xlueops.exe:无线网络安装向导

11-06 女斗合众国:win7系统cf与主机连接不稳定怎

11-06 0xc000022-[cf烟雾头]cf怎么调烟雾头

11-06 qizideyouhuo:应用程序无法正常启动0xc0000

11-06 ipz-185:win7系统vcf文件怎么打开

11-06 傻哥蹦迪:win10系统s4怎么打开usb调试

11-06 八神浩树gtaste:回收站清空了怎么恢复

11-06 妖尾之黑色守护:win10系统电脑没有1440x900

11-06 校园至尊魔王小说:win7系统浏览网页时字体

11-06 女斗合众国:win10系统访问共享文件夹提示请

11-06 tokyo hot n0654:恢复win7系统默认字体一招

11-06 雨酷仙境:设置win7系统转移临时文件夹腾出

11-06 阿穆纳伊之杖:win7系统开始菜单在右边还原

11-06 tunespotting:win10系统火狐flash插件总是

11-06 甘尔葛分析师：计谋网站seo关键词暴涨有什

11-06 蔡贵霖: 计谋网站seo关键词暴涨有什么秘密

11-06 博益网首页:ao3网页版进入不了解决方法

11-06 漏斗子专栏: 网站数据分析小白易懂精华篇

11-06 见证双虹怎么做:win7系统开启telnet命令的

11-06 颾狐蝶蜋:系统资源不足无法完成请求的服务

11-06 国光中学校歌:提交网站到alexa查询详细步骤

11-06 西安有情天:静态网页和动态网页的区别

11-06 红木雅尚斋:外部链接构造对网站的好处

11-06 前官礼遇：防止域名劫持–增强域安全性的10

11-06 密传二转答案: 中文分词算法有哪些

11-06 金泉家园邮编:百度快照劫持的表现及应对方

C++ rtw_read8函数代码示例发布时间：2022-05-30

C++ rtw_netdev_priv函数代码示例发布时间：2022-05-30

剪的笔顺,诠释剪的笔画,认识剪的部首

1 六六分期app的软件客服如何联系？(六六分期

六六分期app的软件客服如何联系？不知道吗？加qq群【895510560】即可！标题：六六分期

阅读：19167|2023-10-27

2 可心卡盟:win10系统火狐flash插件崩溃怎么

今天小编告诉大家如何处理win10系统火狐flash插件总是崩溃的问题，可能很多用户都不知

阅读：9982|2022-11-06

3 亲亲特价:怎么删除回收站图标

今天小编告诉大家如何对win10系统删除桌面回收站图标进行设置，可能很多用户都不知道

阅读：8322|2022-11-06

4 济南大学虚拟社区:鲁大师节能降温的具体办

今天小编告诉大家如何对win10系统电脑设置节能降温的设置方法，想必大家都遇到过需要

阅读：8691|2022-11-06

5 xlueops.exe:无线网络安装向导

我们在使用xp系统的过程中,经常需要对xp系统无线网络安装向导设置进行设置，可能很多

阅读：8635|2022-11-06

6 女斗合众国:win7系统cf与主机连接不稳定怎

今天小编告诉大家如何处理win7系统玩cf老是与主机连接不稳定的问题，可能很多用户都不

阅读：9651|2022-11-06

7 0xc000022-[cf烟雾头]cf怎么调烟雾头

电脑对日常生活的重要性小编就不多说了，可是一旦碰到win7系统设置cf烟雾头的问题，很

阅读：8618|2022-11-06

8 qizideyouhuo:应用程序无法正常启动0xc0000

我们在日常使用电脑的时候，有的小伙伴们可能在打开应用的时候会遇见提示应用程序无法

阅读：7995|2022-11-06

9 ipz-185:win7系统vcf文件怎么打开

今天小编告诉大家如何对win7系统打开vcf文件进行设置，可能很多用户都不知道怎么对win

阅读：8649|2022-11-06

10 傻哥蹦迪:win10系统s4怎么打开usb调试

今天小编告诉大家如何对win10系统s4开启USB调试模式进行设置，可能很多用户都不知道怎

阅读：7532|2022-11-06

客服电话

电子邮件

C++ rtw_read32函数代码示例

示例1: rtl8812_sreset_linked_status_check

示例2: rtl8188e_set_FwMediaStatus_cmd

示例3: rtl8192c_sreset_linked_status_check

示例4: rtl8192c_sreset_linked_status_check

示例5: _LLTRead

示例6: _LLTWrite

示例7: ips_enter

示例8: proc_get_read_reg

示例9: fw_cmd_data

示例10: _ips_leave

示例11: ReadChipVersion

示例12: proc_get_read_reg

示例13: rtl8188e_sreset_xmit_status_check

示例14: EnableInterrupt8723BSdio

示例15: ips_enter

示例16: rtl8192c_sreset_get_wifi_status

示例17: ClearInterrupt8723ASdio

示例18: ODM_EdcaTurboInit

示例19: DisableInterruptButCpwm28723ASdio

示例20: TDLS_restore_workitem_callback

请发表评论

全部评论

上一篇：

下一篇：

MATLAB实现闭环传递函数与状态空间之间的相

CVE-2022-35302

krishnaik06/Machine-Learning-in-90-days

willowtreeapps/spruce-android: Spruce An

armancodv/building-energy-model-matlab:

剪的笔顺,诠释剪的笔画,认识剪的部首

六六分期app的软件客服如何联系？(六六分期

florent37/ViewAnimator: A fluent Android

florent37/Shrine-MaterialDesign2: implem

CVE-2020-36276

SimpleSoftwareIO/simple-sms: Send and re

关于我们

产品与服务

解决方案

139-2527-9053